Showing 2511 items
matching saw-tooth
-
Flagstaff Hill Maritime Museum and Village
Saw
Compass saw with wooden handle secured to the blade with 2 screws. Handcut teeth, about 6 points per inch (30mm).flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Whitehorse Historical Society Inc.
Photograph, Portable Steam Engine
Black and white photo of portable steam engine 2.5 H.P. Built about 1895 and used for operative saws, chaffcutters, etc.portable steam engine -
Rutherglen Historical Society
Tool - Handle, 1900
Wooden handle with metal attachment to which two screws are attached, used as one handle (there were two) for a cross cut sawcutting wood, mining, farming, building, transport, sale -
Bendigo Historical Society Inc.
Photograph - ELMA WINSLADE WELLS COLLECTION: MUM AND DAD ON VERANDAH
Sepia photograph: man and woman sitting on a verandah, the man is reading while the woman is sawing. On the back Mum and Dad on verandah, Cairns.person, group, family portrait -
Flagstaff Hill Maritime Museum and Village
Saw
James S Steele tool boxHandsaw blade 560mm long. Has 4 Saw-screws on handle one holding the makers info. Made by Spear and Jackson Sheffieldflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
City of Greater Geelong
Orange Tattoo Gun, c. 1990
Part of a Prisoner made Tattoo Gun - made and confiscated at Geelong Gaol. Circa 1990's. (Prisoner issued Tooth Brush)Orange toothbrush moulded to form tattoo gun with sticky tape.geelong, gaol, museum, tattoo, contraband -
Flagstaff Hill Maritime Museum and Village
Plane
Panel plough plane, with blade missing. Has wooden handle shaped like saw handle. Two large bolts with wing nuts at endsflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, panel plough plane -
Churchill Island Heritage Farm
Tool - Panel saw, Disston Saws
Panel saw with tapering blade and small corrugations, wooden handle affixed with brass rivets. Borer holes in handle. Surface rust and pitting on steel.DISSTON [on brass plaque on handle] -
Lakes Entrance Regional Historical Society (operating as Lakes Entrance History Centre & Museum)
Photograph, Lakes Post Newspaper, 1/01/1992 12:00:00 AM
Also two other black and white photographs of Rodney Streeter taken at the Art Show January 1992 and January 1993 numbers 04070.1 and 04070.2 sizes 13.5 x 7.5 cm and 8 x 11 cmBlack and white photograph of chain saw artist Rodney Streeter at Rotary Art Show held at the Old Mechanics Hall Lakes Entrance Victoriasports -
Wodonga & District Historical Society Inc
Tool - Shearing Hand Set, c1960
The wool industry has been critical to the Australian economy from the early days of European settlement. The increase in wool production in the mid to late 19th century led to the need to replace the hand shears with some mechanized forms of shearing.The first commercially successful sheep shearing machinery by Frederick York Wolseley in New South Wales who was granted a patent for his machine on 28 March 1877. Many of the early settlers to North East Victoria droved sheep overland from both Sydney and South Australia and established large pastoral runs in the district. Wodonga became a major service centre for the industry and established major saleyards for the pastoral and cattle industries. The handset has the company name "Heiniger" on the side. Heiniger is a Swiss company with subsidiaries in Australia and New Zealand. It was originally established in 1946.This item is connected to a major rural industry in North East Victoria.A metal handpiece for a sheep shearing. A toothed blade is held in place with metal adjustable screws at one end. A jointed metal pipe at the other end allows attachment to the shearing machine. The hinge has been covered with leather.On adjustment knob "Heinger"shearing industry, shearing equipment, shearing handset -
National Wool Museum
Photograph
Mr McCook was manager of "Marathon" 1875-1880, the owner was Samuel WilsonMr McCook. Marathon Bought of W Gibson & Son Tasmania/ 1876/ 51 two tooth ewes & 1 (Ram)/ @ 5 5..0 each 130 Guineessheep breeding - history sheep stations - history, mccook, mr a - marathon gibson, w - w gibson & son, marathon, sheep breeding - history, sheep stations - history -
Dandenong/Cranbourne RSL Sub Branch
Photograph - Framed photograph, Circa early 1900s
AYESHIRE was part of the second Convoy of Australian and New Zealand Troops December 1914. 7,763 gross tons. 140.2 x 17.9 metres. Cargo steamship (refrigerated) built by Hawthorn Leslie, Hebburn for Elderslie SS Company Ltd, Glasgow 1902. Twin screw, triple expansion engine making 13 knots, 1910 owned by the Scottish Shire Line Ltd, London and registered at Glasgow.Wooden framed sepia photograph of Servicemen aboard ship being farewelled by family and friends.The vessel pictured is the HMAT Ayrshire. She saw service during WW1 between1914 and 1918. Inscribed "Ayrshire" 3-7-16. -
Tatura Irrigation & Wartime Camps Museum
Fret Saw, 1940
Made by internee at camp 3 tatura, used as a handtool. blade made from steel,(stays from a ladies corset)Handmade wooden saw varnished frame, turned handles ( either end)with supportin centre struts & metal serrated cutting blade with adjustable metal rod.RH ( on adhewsive tape)tatura -
Tatura Irrigation & Wartime Camps Museum
Bow Saw, 1940s
Made and used by internees at Camp 3Handmade wooden frame, wooden centre strut across frame. Metal serrated edged blade. Later addition of twisted baling twine at top of saw.camp 3, tatura, saw -
Flagstaff Hill Maritime Museum and Village
Saw
Cross cut saw. Blade attached to handle by 2 rivets each end. Handles wooden. Blade 1760mmL x 150mmW. Has 52 teeth. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Flagstaff Hill Maritime Museum and Village
Saw
John Heath tool boxRip saw blade 670mmL. Has F H in black on blade. Wood brown painted handle with 3 holes & 2 bolts holding handle on. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Queen's College
Letter, September 16 1789
Written to "my dear Sammy" i.e. John Wesley's nephew Samuel Wesley 1766 - 1837, son of Charles Wesley. The recipient identified by Eliza T. Tooth.Letter 1789 September 16 [to Samuel Wesley, addressed] to Miss Wesley in Chesterfield Street, Marylebone, from John Wesley. Holograph, signed. john wesley, samuel wesley, charles wesley, eliza t. tooth -
Bendigo Historical Society Inc.
Photograph - PETER ELLIS COLLECTION: PHOTO NIMMY MATTHEWS
Large Black and white photograph. White edges. Man seated on dining room chair in lounge room hold a bow and a saw. Man is wearing tweed style suit and glasses. Back of photo reads: Nimmy Matthews Saw Player. I32/G21A. Back is also stamped with Copyright of this photograph belongs to the Bendigo Advertiser. This photograph can only be reproduced with the permission of the Bendigo Advertiser.Bendigo Advertiserphoto, individual, nimmy mathews -
Glenelg Shire Council Cultural Collection
Tool - Underwater Chainsaw, n.d
Underwater chainsaw, pneumatic operation, iron, steel and alloy, painted red, steel blade, no chain, power vane motor and steel hose attachmentsFront: Consolidated Pneumatic Tool Co, London. CP DANARM SAW, Danarm limited, Stroud Glos England M/C No CP4711781 -
Orbost & District Historical Society
saw, first half 20th century
This item is an example of a woodworking tool commonly used before the widespread use of power tools.A saw with a long, tapered narrow serrated blade for cutting small holes such as keyholes. The blade is held by two large head brass screws onto a wooden handle.tool woodworking keyhole-saw -
Lakes Entrance Regional Historical Society (operating as Lakes Entrance History Centre & Museum)
Photograph, Bulmer H D, 1940c
Black and white photograph of view over Kalimna, Maringa Creek, Saw Mill Flat, Fraser Island, Flannagan Island, aireal view. Lakes Entrance, Victoria.waterways, topography, tourism -
Bendigo Historical Society Inc.
Book - FORTUNA COLLECTION: LANSELL'S FORTUNA
Produced by Army Survey Regiment, Bendigo. Describes grandeur of Fortuna and the vision and enterprise that saw the complex of mansion , gardens and mine buildings develop on the site. Twelve pagesArmy Survey Regimentbendigo, house, fortuna villa, fortuna, george lansell, ballerstedt, sandhurst, bendigo -
Surrey Hills Historical Society Collection
Book, Robert Hoddle: pioneer surveyor 1794-1881, 2004
(Ms) Berres Hoddle Colville is a local Surrey Hills resident and is a descendant of Robert Hoddle. Robert Hoddle was the first Surveyor General of Victoria. He arrived in Australia in 1823 and was one of the very earliest surveyors to explore, measure and map large areas of this vast, varied and difficult countryside, in a burgeoning era of pastoral settlement. 1837 saw him appointed Surveyor in Charge of the Port Phillip District. This book is based firmly on substantial extracts from Hoddle's own diary and other writings. Includes black and white sketches, maps and colour pages.Robert Hoddle was the first Surveyor General of Victoria. He arrived in Australia in 1823 and was one of the very earliest surveyors to explore, measure and map large areas of this vast, varied and difficult countryside, in a burgeoning era of pastoral settlement. 1837 saw him appointed Surveyor in Charge of the Port Phillip District. This book is based firmly on substantial extracts from Hoddle's own diary and other writings. Includes black and white sketches, maps and colour pages.Front endpaper: SURREY HILLS HISTORICAL / SOCIETY / PURCHASED FROM / THE AUTHOR ON THE OCCASION / OF HER TALK ON ROBERT HODDLE / TO THIS SOCIETY ON 17-10-[20]05 Title page: signed by the author: Berres Hoddle Colville / 17 October 2005 /(mr) robert hoddle, surveyors, (ms) berres hoddle colville -
Lakes Entrance Regional Historical Society (operating as Lakes Entrance History Centre & Museum)
Photograph, 1905c
Second photograph identicalBlack and white photograph showing pioneer man Jack Curtis sitting outside his slab hut, wearing shirt and tie. Cross cut saw leaning against hut, hand saw hanging from slab chimney, long handle axe leaning against stump, dish on stump, single furrow plough near hut. Dense bush behind hut, Webbs Corner Bunga VictoriaJack Curtis 1905-6 outside his homecoast -
Flagstaff Hill Maritime Museum and Village
Equipment - Gauze & Box, Flexlock Products, Early - Mid 20th Century
When used as a medical dressing, woven gauze is usually made of cotton. It is especially useful for dressing wounds where other fabrics might stick to the burn or laceration. Many modern medical gauzes are covered with a perforated plastic film such as Telfa or a polyblend which prevents direct contact and further minimizes wound adhesion. Also, it can be impregnated with a thick, creamy mixture of zinc oxide and calamine to promote healing, as in Unna's boot. (An Unna’s boot is a special gauze (usually 4 inches wide and 10 yards long) bandage, which can be used for the treatment of venous stasis ulcers and other venous insufficiencies of the leg. It can also be used as a supportive bandage for sprains and strains of the foot, ankle and lower leg. The gauze is impregnated with a thick, creamy mixture of zinc oxide and calamine to promote healing. It may also contain acacia, glycerin, castor oil and white petrolatum.) Gauze is also used during procedures involving accidental tooth loss; either the gauze is used to provide pressure as the tooth is moved back into its corresponding socket, or the tooth is wrapped in gauze and placed in milk or saline to keep it alive while the tooth is being transported or prepared for reinsertion. https://en.wikipedia.org/wiki/GauzeAccess to emergency medical help in early settlement days of Victoria could take quite some time, especially in remote areas. From 1888 First Aid Kits and instructions became available for work sites, offices, community groups and individuals, helping to bridge the gap between the accident and the arrival of medical assistance. Gauze was widely used in many medical conditions.Gauze and box entitled "MASTISAC?. The Combination Bandage" Bandage is complete with instructions for use inside.Mastisac ‘The combination Bandage. A convenient and effective FIRST AID. Prepared and distributed by Flexlock products, 15 Mills Street, Albert Parkflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, first aid, bandages, dressings, medical -
Flagstaff Hill Maritime Museum and Village
Equipment - Gauze & Box, Early - Mid 20th Century
When used as a medical dressing, woven gauze is usually made of cotton. It is especially useful for dressing wounds where other fabrics might stick to the burn or laceration. Many modern medical gauzes are covered with a perforated plastic film such as Telfa or a polyblend which prevents direct contact and further minimizes wound adhesion. Also, it can be impregnated with a thick, creamy mixture of zinc oxide and calamine to promote healing, as in Unna's boot. (An Unna’s boot is a special gauze (usually 4 inches wide and 10 yards long) bandage, which can be used for the treatment of venous stasis ulcers and other venous insufficiencies of the leg. It can also be used as a supportive bandage for sprains and strains of the foot, ankle and lower leg. The gauze is impregnated with a thick, creamy mixture of zinc oxide and calamine to promote healing. It may also contain acacia, glycerin, castor oil and white petrolatum.) Gauze is also used during procedures involving accidental tooth loss; either the gauze is used to provide pressure as the tooth is moved back into its corresponding socket, or the tooth is wrapped in gauze and placed in milk or saline to keep it alive while the tooth is being transported or prepared for reinsertion. https://en.wikipedia.org/wiki/GauzeAccess to emergency medical help in early settlement days of Victoria could take quite some time, especially in remote areas. From 1888 First Aid Kits and instructions became available for work sites, offices, community groups and individuals, helping to bridge the gap between the accident and the arrival of medical assistance. Gauze was widely used in many medical conditions.Gauze and maroon box with sliding top, purple bandage (gauze) inside. Gold rim top and bottom. None.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, first aid bandages, dressings, medical -
Queen Victoria Women's Centre
Photograph, 11 June 1996
Colour photo. Country Women's Association Luncheon. Three women not looking at the camera. Left in green is Glenys Sharma (General Manager), middle, in hounds-tooth jack and right in red jumper are both unidentified. All wearing unreadable name tags. official events, service clubs, charitable organisations -
Mont De Lancey
Tool - Hay Rake, Unknown
Used in the 19th century.A handmade steel wide toothed hay rake head with 14 teeth attached to a wooden top made by Wandin Sebire. There are two large holes where a handle would be attached. It was used to rake hay into heaps after scything in the 19th century. rakes, tools, hay rakes, agricultural tools, agricultural equipment -
Flagstaff Hill Maritime Museum and Village
Wood Sample, 1840
This shipwreck artefact is a section of wood from the vessel “Success, a former immigrant ship, and later a convict hulk at Melbourne. The sailing ship “Success” was a teakwood vessel built in Natmoo (Natmaw), Tenasserim, Burma (now Myanmar) in 1840 for Cockerell & Co., Calcutta. Over its lifetime of 106 years, it was used to trade in the Indian subcontinent, to transport free emigrants to Australia, as a prison hulk in the Port of Melbourne for both hardened criminals, and later for women and boys, as a storage vessel for ammunition, a reformatory, and as a floating museum sent around the world to tell the tale of the convict era. During the time “Success” was used as a museum, pamphlets were distributed to paying customers advertising erroneously, that the “Success” was the oldest ship in the world. The “Success” sank and was re-floated twice: the first in Sydney in 1885, the second in the USA in 1918, before it was finally burned and sank July 4, 1946 in Lake Erie, near Sandusky, Ohio in 1946. Although the “Success” was home to prisoners while berthed in the Port of Melbourne, it was not used as convict transport. There has been speculation that Ned Kelly’s infamous armour was displayed on the “Success”, but this cannot be verified. Another link to Ned Kelly is Henry Johnson, an Irish prisoner on the Success, who was implicated in the murder of the ship’s warder, and later Johnson was supposedly a bushranger with Ned Kelly. It is also rumoured that Ned Kelly’s father John was a passenger on the Success, but this is also unverified. There are over 16 other ships named “Success”, although one in particular causes some confusion when researching “Success” in Australia. This other ship – the “HMS Success” was a 28 gun frigate built in1823, which was broken up in 1849. It also sailed to Australia. Statement of Significance: This piece of wood from the “Success” is connected to the ship Success, built in Burma in 1840. The “Success” is connected to the history of Australia because she was used as a merchant ship to transport immigrants to Australia, as a prison ship in Melbourne, a storage vessel, and as a floating “convict” museum, which travelled the world. Section of wood from ship “Success”. Wood appears to have been partially burnt, saw marks faintly visible on wood, remnant of a label with handwriting in black inklabel marked in script handwriting “Convict ship / “Success””flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, sailing vessel success, wood sample of sailing ship success, cockerell & co. calcutta -
Flagstaff Hill Maritime Museum and Village
Saw
Cross cut saw square with large handsaw grip, and holes for an extra grip at toe and on top. Handle secured to blade with 4 screws. No set to teeth to the 58 teethflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, cross cut saw