A kangling is a trumpet made out of a human thighbone, used in Tibetan Buddhism for various chöd rituals. The practitioner, motivated by compassion, plays the kangling as a gesture of fearlessness, to summon hungry spirits and demons so that she or he may satisfy their hunger and thereby relieve their sufferings. It is also played as a way of "cutting off of the ego." The hip end of the thigh bone is cut off, forming a nearly circular opening in the bone’s shaft, and it becomes the mouthpiece. The large flaring at the knee is left intact except for two gouged openings through which air and sound escape. The “bell” end of a kangling is usually covered with tightly sewn skin to ensure durability. Made out of a human thighbone, reinforced with leather. tibetan buddhism, musical instruments, ceremonies, ritual implements

The design of this item is associated to what was "first described by Professor R. R. Macintosh in the Lancet of February 13th, 1943, this design is now the acknowledged leader throughout the world." (PENLON, 1969) Reference: PENLON. 1969. Anaesthetic Equipment - Longworth Scientific Instrument Company LTD. Abingdon, Berkshire, England. January 1969. The manufacturer of this blade is the Boots UK Limited pharmacy company, they apparently had a branch in Australia to distribute their medical and pharmaceutical equipment and part of them was focused on the manufacturing of laryngoscopes blades. The Boots company reproduced this trending design used in the anaesthetic practice. URL Reference: https://en.wikipedia.org/wiki/Boots_UK / https://en.wikipedia.org/wiki/Alliance_Boots Macintosh semi curved blade designed in a baby size, without light bulb attached. Minor scratches and some slight hit marks over the piece surface caused by its previous use. It has the manufacturer name and brand and the place where it was made at the back of the blade base.Stamped at the blade back base area, BOOTS AUSTRALIA / MADE IN ENGLANDmacintosh, blade, boots australia, boots uk limited, england blade

Press studs, also known as snap fasteners, used in home made clothing.Triangular card with 4 size 00 press studs."The British Snap, guaranteed rustless, Size 00, Made in England"press studs

This ash tray was given to a member of the Wodonga community by a veteran of World War 1 who served in the Royal Navy. The ashtray was made during "spare time" on board from discarded shell casings. The veteran, Howard Nation, came to Australia after the war and worked in several rural areas including Bairnsdale, Victoria. He spent time doing general farm labouring work and also occasionally worked on fishing trawlers operating out of Lakes Entrance.This ash tray represents the ingenuity of servicemen during World War 1.An ashtray made during WW1 from the discarded shell casings.war memorabilia, world war 1

Box No2A Brownie camera, model E. Exposure speed 1/30 second with time exposure. Has a carrying handle. Black leatherette covered jute board construction. Made by Eastman Kodak.Brownie No.2A Brownie Use Film No,116 Made in USA By Eastman Kodak Co. Rochester NY.photography, cameras

The lathe-making business incorporated in 1902 as Drummond Bros Ltd originated in the fertile mind of Mr Arthur Drummond, said to have been living at that time at Pinks Hill, on the southern edge of Broad Street Common, west of Guildford. Mr Drummond, whose accomplishments included several pictures hung in the Royal Academy, was unable to find a lathe suitable for use in model engineering. In 1896 he designed for himself a ‘small centre lathe … which had a compound slide rest with feed-screws and adjustable slides’. He also designed and built ‘lathes of 4.5 inch and 5 inch centre height, which had beds of a special form whereby the use of a gap piece was eliminated but the advantages of a gap-bed lathe were retained’. Assisted by his brother, Mr Frank Drummond, who had served an apprenticeship to an engineering firm at Tunbridge Wells, the first lathes were made in a workshop adjoining Arthur Drummond’s house. The demand that speedily built up led to the decision to form a company and manufacture the lathes for sale commercially. Land was acquired nearby, at Rydes Hill, and the first factory built. The enterprise was a success, and the company quickly established ‘a high reputation in this country and abroad for multi-tool and copying lathes, and gear-cutting machines’. Other lathes were added to the range, including the first of the ’round bed’ machines for which the firm became widely known. A Drummond 3.5 inch lathe was among the equipment of Captain Scott’s 1912 expedition to the South Pole, and large numbers of 3.5 inch and 4 inch designs were exported to Australia, Canada and India. By the outbreak of war in 1914, 5 inch, 6 inch and 7 inch screw cutting lathes, arranged for power drive, were on sale. Large orders were received from the government for 3.5 inch lathes, for use in destroyers and submarines, and 5 inch lathes for the mechanised section of the Army Service Corps. The latter were used in mobile workshops. The factory worked night and day to supply the forces’ needs, until production was disrupted by a fire which destroyed a large part of the works in May 1915. As soon as rebuilding was complete work restarted. At the end of the war the entire production was being taken by the Government departments, a special feature being a precision screw lathe, bought by the Ministry of Munitions in 1918. Between the wars Drummond Bros Ltd introduced new machines for the motor vehicle, and later the aircraft industry, and the works were extended on many occasions to fulfill the increasing orders. The Maxicut multi-tool lathe (1925), designed for high-production turning operations, was one of the first machines of this type to be built in England. It was followed (1928) by an hydraulic version for turning gear blanks, and similar work. Further developments provided machines which, during the Second World War, turned all the crankshafts and propeller shafts for Bristol engines. Others, ordered by the Ministry of Supply were employed in turning shells, and many other specific needs of vehicle and aircraft manufacture were catered for by new types of Drummond lathes. Production of the small centre lathes ceased during the war when the company needed to concentrate on building multi-tool lathes and gear shapers. After the war a completely new Maxicut range was introduced, replacing the older versions, and fully automatic. The types were continually developed, and new versions manufactured until the end of the company’s life in 1980. The disappearance from the scene of Mr Arthur Drummond in 1946, and the end of the company’s autonomous existence in 1953 when the company was acquired by William Asquith Ltd, which was in turn bought by Staveley in 1966, meant that the factory at Rydes Hill became one – albeit very effective – part of a large national engineering company. Achievements at the Guildford works during its last years included the development of automated Maxicut gear-shapers in what was ‘probably the most fully automated gear shop in the country’, while a machine from Guildford was sent to the Osaka Fair in 1962. In 1963 an agreement was signed with Hindustan Machine Tools for the manufacture of Maxicut gear-shapers in state owned factories in Bangalore and Chandigarh. During 1963 the two largest multi-tool lathes ever made in the UK were installed in Ambrose Shardlow’s works in Sheffield for handling cranks up to 14 foot long. In 1976 Drummond lathes were included in Staveley’s £14,000,000 installation in Moscow of an automated production line for Zil motor cars. Up to the end invention continued at Guildford: a new Drummond Multi-turn memory-controlled machine was shown at the International Machine Tool Exhibition in 1977. This could not save the works from the pressures of the late 1970s, and Staveley Industries closed its Guildford site in 1980.An early example of a lathe that was designed primarily for the hobbyist model maker. It is in good condition and sought today by collectors as many of it's attributes were innovative at the time and lead to further development and incorporation of some of its features into more industrial models of production machinery. Lathe, round bed, treadle powered lathe, Drummond Type A, Serial number and maker's inscription. 1920-1923, Made by Drummond Brothers in Guildford, Surrey, England. Lathe is complete with Chuck, Tool post and Tail Stock in situ (30 extra parts)"MADE BY DRUMMOND BROTHERS LIMITED - PATENT TEES - RYDE'S HILL n GUILDFORD SURREY", "Serial Number 01470," "L44" or "L45 " flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, lathe 1920-1923, round bed lathe, treadle lathe, drummond type a, guildford surrey, drummond brothers guildford surrey england, tread'e

This pole chair was probably made as a display item for the Slab Hut (Orbost Visitor Information Centre).A triangular shaped three-legged pole chair. The chair seat is made from a hessian potato sack - Packed by McDougals of Neerim Vic. The sack is attached by wire. The frame of the chair appears to be made from one solid piece of wood. It is dark brown in colour and has a cross piece at the front and a small strengthening piece on the backm leg.furniture chair

Brace and eyed auger bits were used for boring deep holes into timber, providing space for mechanical fasteners, such as bolts or spikes. Made of iron, the pictured tool comprises a Jennings type, double twist auger bit with a threaded point to draw the bit into the wood. The other end of the shank is shaped as an eye and fitted to a hand brace. Sometimes simple cross-bars were used instead of a brace. The eye design provides greater strength than a standard auger bit. This tool’s cradle further secures the bit, preventing unwanted twisting during use. Since the late 1800’s, brace and eyed auger bits such as this were used for boring holes in fence posts, bridge building and other heavy construction.Bit bolted on and held with hook. Brace probably blacksmith made. Bit commercially made. May have been used vertically. Surface pitted.auger, fencing, brace, blacksmith, tool, tools, farm, farming, churchill island

Used in orchards by Harry Shaw (Orchardist in Springvale Rd, Glen Waverley near cnr Highbury Road) Orchard was sold in 1950. Later used on poultry farm in Forest Hills.Body of scales: brass plate inscribed - Salter Pocket Balance, made in England. No.3. To weigh 50LB. Slide measure 0 to 50. Pattern at top: twisted rope with arrow through middle. Reverse side: green painted metal. Hanging metal ring at top end and metal hook at lower end. Salter Pocket Balance, Made in England. No.3. To weigh 50LB.

Napkin rings for the Mess made of brass tubing (possibly a shell) in Coat of Arms on side commemorating famous battles of WW1.Gold napkin rings, home made of Brass. Possible made from a shell with emblem/Shield Commemorating a battle of WW1. 1. Emblem includes Coat of Arms and name of Amiens. 2. Emblem includes Coat of Arms and name of Bapaume. 3. Emblem includes Coat of Arms and name of Albert Town, Somme.1. Coat of Arms Amiens. 2. Coat of Arms Bapaume. 3. Coat of Arms Albert.passchendaele barracks trust, trench souvenirs

A 100-yerar-old (+) postcard designed and ornamented in sand. It is part of a larger collection donated to the Kew Historical Society by Anna French. The collection includes personal items from the donor's family, as well as items given to the donor and her mother by a family friend, Lucy Merritt (Jean) Hornby. The item is from that part of the collection inherited or assembled by Jean Hornby. The collection is significant given Jean Hornby's mother's descent from Robert Hornby (1854-1935) and Eva Merritt (1865-1959); her mother the chid of a family who settled in Kew in the 1850s, thus providing a chain of provenance for items dating to the mid-nineteenth century, when her maternal forebears arrived in Melbourne. Other items represent Jean Hornby's contribution to her local and wider community.Tiny postcard with a design made by local coloured sands. The card is attached to a larger inscribed sheet.Postcard: Alan Bay Sands / St Lawrence's Church, Undercliff, I of W. Sheet: Over 100 years / St Lawrence's Church Undercliff / Isle of Wight / Made of Alan Bay sand, which is of seven different colours.postacrds, isle of wight, coloured sand postcards, alan bay -- isle of wight

The Fashion & Design collection of Kew Historical Society includes examples of textiles dating from the 18th, 19th and 20th centuries. Some of the textiles, were used as items of clothing, others as items of household decoration, or simply as travel souvenirs. These textiles were created both domestically and internationally. Predictably with the growth of an ethnically and culturally more diverse community in Kew after the Second World War, textiles, clothing and objects in the collection inevitably reflected this diversity. This form of bobbin lace is made in Malta. It is a guipure style of lace. Maltese lace is worked as a continuous width tape lace on a tall, thin, upright lace pillow called a "Trajbu" and the Bobbins are called "Combini" . Bigger pieces are made of two or more parts sewn together. Lace made in Malta was originally needle lace, from the 16th to the 19th century, when the economic depression in the islands nearly led to the extinction of lacemaking there. But in the mid 1800s, Lady Hamilton Chichester sent lacemakers from Genoa to Malta. They used the old needle lace patterns and turned them into bobbin lace, which was quicker. It was not long after its introduction that the Maltese lace developed its own style from Genoese lace. Maltese lace was shown at The Great Exhibition of 1851 and it became popular in Britain. The style was copied by lacemakers in the English Midlands, and it was one of the sources for Bedfordshire lace. Characteristics of Maltese lace. Maltese lace usually has the following characteristics which are useful for identification. It is usually made from cream silk. There is often the 8 pointed Maltese cross as part of the pattern, worked in whole or cloth stitch.The pattern may also have closely worked leaves known as “wheat ears” or “oats”. These are plump and rounded in shape, rather than the long narrow leaves of other types of bobbin lace. Camisole, made of silk thread Maltese bobbin lace that is constructed of lengths of lace forming two rectangles with a hole for the neck. Shows the characteristic Maltese cross and wheat ears. Fabric is made of tape lace joined togethercamisoles, maltese lace, bodices

French Made binoculars made in 1900 for Defence Dept made by A TUBBUZequipment, ww1, army

French Made binoculars made in 1900 for Defence Dept made by A TUBBUZequipment, ww1, army

These type of tobacco pouches were used mostly by the outdoor/outback type of male. They were a product of an earlier period in time when males in the outback were considered "red back" adventurers. This pouch is more of a statement than a useful tobacco pouch. It comes from a younger time in bush folk law when the outback appearances was in fashion and before the "new age" male emerged(circa early 1900s).This tobacco pouch was admired in the outback scene and spoke of adventure and "the wild". It was a time when travel in the outback was, in the top end of Australia especially, considered unsafe and "frontier" type adventure filled environment. It was a time when colloquially speaking 'men were men', in other words tough and resourceful, and could tackle anything. This attitude was more so in isolated country areas such as in the Kiewa Valley before "the sensitive new age" male was evolved. The pouch presents the early presentation of the outback male as rugged, independent and resourceful. The Kiewa Valley and the tobacco fields, especially during the construction stages of the Hydro Electricity Scheme, was the right environment for such a display.This tobacco pouch is the bottom or main containment pouch for rubbed tobacco leaf to be smoked either as "roll you own" cigarettes or in a pipe. The pouch is of crocodile skin and is light brown on one side and darker brown on the other. The pocket is fashioned with the top section curved to allow fingers to remove the top cover, see KVHS 0059(2). The pocket has fine , but strong stitching holding the bottom and sides together. It is made of relatively medium thick hide and the crocodile markings are both outside and inside. See KVHS 00059(01) for main pouchCrocodile markings (not hand made)loose tobacco, pipe smoking, rural smoking, rural red neck workers., tobacco

This box and matches were owned by Lindsay Thomson and purchased by him for use at a scout jamboree - Senior Scout Venture which was held on Fraser Island, north of Brisbane in January (1-7), 1951. (Matches were not officially allowed to be taken by the scouts onto the island.) It was for Scouts over 15 years of age who had reached the first-class standard. The jamboree was extended by one week because of a suspected case of poliomyelitis. A photo of the Orbost contingent returning to Spencer Street Station Melbourne was taken by The Leader newspaper. A box for Bell's Waxies. It is a rectangular shape coloured red, white and blue. The waxed matches are made of fine twisted cotton threads. The contents are in a sliding tray. There are some matches inside. The box has been glued onto paper with some cotton threads on the left and a complete match on the right.Bell's Waxies Made in Australia Average Contents 100 1/2matches smoking-accessories bell wax-matches

Brass Enema Syringe with 2 finger rings & one large ring for thumb which operates plunger. Top screws off to allow filling. Silvered nozzle also screws off plaque attached with wording W JNO Baker, 3 Hunter St Sydney, and Made in England.W JNO Baker , 3 Hunter St Sydney , Made in Englandmedicine, nursing, enema syringe

The latest in a series of events including recitals and masterclasses. Patron David Hobson, this program was devised by Graeme Vendy. President of the Arts Foundation Val Sarah.Small ticket white card with black text, for Made in Ballarat Concert held at Wendouree Performing Arts Centre on Sunday 22 June 2008.Ballarat Arts Foundation & Ballarat Symphony Orchestra present MADE IN BALLARAT Sun, Jun 22, 2008 2:3o PM DOOR 1 STALLS made in ballarat, the ballarat arts foundation, the ballarat symphony orchestra, ballarat grammar, jacqueline dark, bob northey, benjamin northey, mario dobernig, david hobson, roger lemke, wendy rechenberg, tony cololan, miffy mcindoe

The quilt was made by Maria Ann Knight, born in England in 1829, died in 1908. She was buried in Castlemaine Cemetery. She came to Australia in 1855. Married to Henry Lancelot Goldsmith, born 1826 died 1912 and also buried at Castlemaine Cemetery.Large patchwork quilt, multi-patterned and multi-coloured. Made of large oblong and square pieces.manchester, bath linen, handcrafts, needlework

Date made June 2004Colour photograph of Glenara Motel, showing front of double storey building. In foreground is a timber memorial statue, made after cypress trees removed. Lakes Entrance Victoriamotels, memorials, rsl clubs

Photographs and descriptions of Christmas decorations made by Tatura locals to decorate the town in 2013.16 page colour booklet. Mainly photographs of Christmas decorations with descriptions and origin noted. All items made from recycled or resurrected material.Tatura Christmas Decorations Projecttatura christmas decorations, recycling

Made by Lavenia Doran (Tyack Molder) c1869 Great Grandmother of Isobel McNamara.- Handmade c 1869 - Drawn/laced threaded front with machine made lace edging & ribbon decorative bows - Aqua cotton fabric liningNilhandmade, drawn thread, night dress bag, mcnamara collection

From the collection of Betty McPheeA black bakelite pen with gold ink lever, pocket grimp and circle trim around lid. Top of lid has gold Swan insignia. Gold nib. Engraved on side, 'Swan' self filler; Mabie, Todd & Cribb; Made in England. Includes Insignia Trade Mark. Swan across barrel near nib.Swan self filler|Mabie, Todd & Cribb|Made in Englanddomestic items, writing equipment

The Kew Historical Society’s collection includes a wide range of leisure objects. Many of the items are European-made, generally of British origin, however there are a number that were made for the Australian market by Australian manufacturers. There were clearly a huge range of toys produced for the Australian and International children’s market in the Nineteenth and Twentieth centuries. The examples of toys in the collection include examples of alphabet toys, arcade toys, baby toys, construction toys, dolls, doll accessories, educational toys, soft toys, tin toys, toy animals, toy blocks, toy machines, toy typewriters, etc. Miniature kitchen stove, cooking utensils and implements. Made of metal and enamel. Orange and black. Eight pieces.miniature toys, toy kitchen equipment, functional toys

Model of Maud made in 2012 by Malcolm Gibson in Geelong. Actual couta boat Maud was launched in 1927 built by Lars Halvorsen and now moored in QueenscliffMAUD is a wooden sailing vessel built in Victoria for fishing. It is an example of the Victorian couta boat class with a design adaptation for local conditions. It was built and designed by Peter Locke Jnr, at Queenscliff Victoria in 1931, with shallower draft than most couta boats so that it could operate from Barwon Heads. It is the only remaining couta boat from the Barwon Heads fleet.Scale model of Couta Boat Maud housed in a purpose built display case made by Showfront (owned by John Tiller)boat model, couta boat, maud