A large number of T model's started their life in Australia being bodied by Holden Motor Body Builders between 1915 and 1927.The mode accounted for 57% of the worlds automotive production Ford took over production in Geelong in 1925White body with red mudguards open coupet model ford, vehicle, cars, holden

This nameplate was attached to the steel steamer Matthew Flinders I, a Suction Hopper Dredge used for pumping up sit and sanding from seabeds. It was donated by the Marine Engineer, Neville Dodds, from Ports and Harbours, from the Matthew Flinders I. The Matthew Flinders was constructed by Morts Dock & Engineering Coy. Ltd in Sydney, New South Wales. Identified as Ship No. 40, the dredge had twin screw engines that were made in Sydney. Its gross tonnage was 1180. It was launched on July 15th, 1916, and registered in 1917 at the Port of Melbourne by the owner, the Department of Public Works in Victoria. Unlike bucket dredges, the Matthew Flinders did not use permanent moorings but instead had bow and stern anchors. It travelled forward on the bow anchor, taking up a strip of even-depth wilt from the bed below. A local newspaper noted that the Matthew Flinders has many advantages that were especially useful for its work at Warrnambool. Warrnambool Harbour had been experiencing silting and sanding for many years. The problem continued even after the construction of the Breakwater in 1890, which was overseen by New Zealand engineer Arthur Dudley Dobson. Melbourne’s Department of Ports and Harbours sent the new Matthew Flinders to dredge the heavy silting in the Warrnambool Harbour in May 1919. This work was previously done by the smaller dredge, the Pioneer. However, after a month of work, the Matthew Flinders was returned to Melbourne for alterations to make it suitable for work in the heavy seas it experienced at Warrnambool. Both dredges were sent up from Melbourne when required over the years to periodically attend to the silting in the Harbour, but the Matthew Flinders was preferred because of its efficiency. It was still dredging the Harbour even in July 1938. The ship’s original master was J G Rosney. In February 1922 Percy Taylor from Ports and Harbours joined the Matthew Flinders as a Mate. 1923 the master in charge was Captain Dunbar. In August 1926 Percy Taylor was appointed as her Master and was later transferred to the Pioneer as Master in 1933. 1930 the dredges were no longer required as the Harbour was no longer suitable as a port. However, one source notes that the Matthew Flinders was still dredging the Harbour in 1938.This nameplate is significant for its association with the suction hopper dredge Matthew Flinders I, which was used to remove the build-up of silt and sand from the Warrnambool Harbour, allowing shipping activities to continue to operate in the Port of Warrnambool. The nameplate identifies the vessel and shows that it was built in Australia in the early 20th century for use within Australia. The need for dredging in the Warrnambool Harbour was a serious and ongoing problem, as silting continued to happen after a series of measures were taken to try and resolve the issue. Eventually, the Harbour could no longer function successfully as a port.Brass nameplate, rectangular with cut-away corners and moulded text, mounted with screws on timber. The plate is from a vessel, the dredge Matthew Flinders I, ship no. 40, built by Morts Dock & Engineering Coy Ltd in Sydney, and registered in 1917. A small rectangular engraved plaque below the nameplate gives further details of the ship and the donor.On nameplate: "MORTS DOCK / & / ENGINEERING COY. LTD. / SHIP BUILDERS / SYDNEY 1917 / SHIP NO 40" On small plaque: "Donated by / NEVILLE DODDS / PORTS & HARBOURS / MARINE ENGINEER / EX "MATTHEW FLINDERS I"flagstaff hill, warrnambool, maritime village, maritime museum, flagstaff hill maritime museum & village, shipwreck coast, great ocean road, dredge, mathew flinders i, steel steam ship, twin screw engines, nsw, state of victoria, suction hopper, public works melbourne, warrnambool harbour, lady bay, sanding, silting, breakwater, morts dock & engineering co ltd, captain dunbar, ship no. 40, niville dodds, ports & harbours, marine engineer, marine technology, ship relic, percy taylor, matthew flinders, pioneer

Robin Boyd was the architect of the Featherstone House, 1969.An Award of Merit to The Featherstone House, Ivanhoe. It is signed by Chairman, J Gates (?) and Secretary, P A Love (?). It is rolled and tied with blue ribbon.Victorian Architecture Award. In accordance with the decision of the Victorian Chapter: The Royal Institute of Architects to record its appreciation of the architecture. Architect Romberg and Boyd Builder P.M. Versteegen & Sons Pty.Ltd. Signed by the Chairman and Secretaryroyal australian institute of architects, raia award, featherstone, robin boyd

Black and white photograph (3 copies- 2 in photograph studio embossed presentation folder)Ringwood Borough Council. Councillors, officers and architect and builder of Town Hall. Left to right - Front Row. A.F.B. Long, Cr. A.T. Miles, J.B. McAlpin. Second Row. J. K. McCaskill, R.G., Wilkins, F.R. Lucas, Eng. Third row. M. J. Jenkins (rate collector), A.C. Leith, architect, A.J. Roberts (builder), Mr. Taylor, Health Inspector. Taken on steps of new town hall, August 1927".

Model ship was presented to the Melbourne Maritime Museum by the British Phosphate Commissioners. Built as Tri-Ellis (1958-74), Tryphena (1974-78), Man Tat (1978-80), 1980 broken up. DWT 13,756 SPEED 14 KNOTS.AT 112RPM. BOILERS LARKSON TRIMBLETUBE. FUEL CONSUMPTION 7 TPD. GENERATORS W.H.ALLEN - 4CYL.2SA290/470. 480B.H.P.320L.W.-220V 333RPM DAILY CONS - 1.5 TONS. EMERGENCY GEN R & H. 40 K.N. -220V. REFRIGERATING MACH: J & G HALL LTD. SUPERSTRUCTURE: FORECASTLE 62'..2 DECKS RIVETED AND WELDED. CARGO BATTONS NOT FITTED. 9 BULKHEADS. RISE OF FLOOR 6".WATER BALLAST 3,296 TONS INCLUDING TUNNEL TANKS 1,341 TONS. 'TWEEN- DECKS FORWARD 274 TONS. REFRIGERATED CARGO INSTALLATION - 6 HOLDS - 55.2',52',54',59.5',43' ,53'. GRAIN CAPACITY :621,640 CU. FT. BALE CAPACITY : 573,810 CU. FT. INSULATED CAPACITY : 5,050 CU.FT. 6 STEEL HATCHWAYS (27',30',30'* 30') (30'* 27.75') (27', 24' * 28' ). 12 WINCHES...DERRICKS 1 (25), 2 (10), 10 (5). MACHINERY: OIL 2SA 7CY.C20 * 1400MM EXHAUST 470MM. 6500 BHP. FUEL BUNKERS: 2135 TONS HIGH VISCOCITY FUEL. The main engine was an opposed piston type Harland & Wolff 6-620/ 1870 6 for the number of cylinders.. 620 for the cylinder bore and 1870 for the combined strokes of the main exhaust pistons in each cylinder. This engine was based no a Burmeister and Wain design but H & W gave these engines their own type designation. Sailed on board its maiden voyage to Australia via Casablanca Morocco where she collected her first load of phosphate. We sailed to Geelong via the Suez canal and the Port of Aden (Yemen) and Freemantle. The first load of phosphate was unloaded at Corio Bay (geelong) Formerly part of the collection of Melbourne shipping company, Howard Smith Ltd. Ship builder's model of the cargo ship Tri-Ellis IMO 5368196 - Body of moulded polyurethane painted in red, black and grey, the deck painted in red, with detailed fittings, machinery, rigging and superstructure, raised on a wooden base. Original ship built Clyde 1958, 11,761 gross tonnes, 531.5' x 68' x 31' (162.0 x 20.73 x 9.45m)plaque at foot of model "MV TRI ELLIS/ LENGTH B.P. 486'-3"- BREADTH MLD 68'0" - DEPTH MLD 40'6"/ TONNAGE GROSS 11,760/ Built by HARLAND & WOLFF LTD/ For BRITISH PHOSPHATE COMMISSIONERS" On model "TRI-ELLIS" painted black

Pittock collection: two steel hand operated punches for leather work * steel hand punch, 190 mm L x 85 mm W, manufacturer's mark not clear Moorrville Pty Ltd * steel tool with guide, 190 mm L x 85 mm W, no manufacturer's marks Items stored in Pitchfork coach builder's box, reference 13000.1.

Pittock Collection: mixed screw drivers, callipers and glass cutter. Glass cutter in original "Red Devil"box, 130mm length. Four minor mixed screw drivers, two straight and two Phillip's head screw drivers; varying in length 95-150mm long. Steel callipers, 190mm in length. Items stored in Pittock coach builder's box, reference 13000.1.Glass cutter in original "Red Devil"box

Colour photograph of weatherboard church at Apollo Bay. Gothic in style it is typical of the simple timber churches built by less wealthy communities in Victoria, mostly before the First World War. St Aiden's was built and opened in 1905, with a local resident as builder. .St Aidan's is one of only a few buildings in Apollo Bay remaining from before World War I. apollo bay, st aiden's anglican church

Black and white photograph of a group of five model trams - 0 gauge - on the end of model tramway layout. The inscriptions on the rear of the photo gives details - Sydney R 1740, Bendigo Birney 11, Sydney O 1111, New York Brill 246 and New Orleans 927. Photo on Ilford paper. Presumed given to Les Denmead. Model builder not known.On rear in blue ink. "These are some of my 'Scratch Built' models. They are R Class 1740 = Sydney Birney 11 = Bendigo (not yet complete) O class 1111 = Sydney Brill 246 = New York NOPS 927 = New Orleans (Bottom Right)"trams, tramways, models, model tramways

Photocopy, A4 sheet of an extract of a death notice of James Fraser, Ballarat Courier, Saturday 13/4/1907. Was a well known employee of the Ballaarat Tramway Company, born 1830 in Scotland, died in Nhill 4/1907. Cutting gives family details. Was a coach builder/painter. Also gives details of a James Duncan. Images of document added 27-08-12.trams, tramways, ballarat tramways, horse trams, coach building

The Richardson family was one of the very early settler families to establish themselves in the Orbost district. Samuel Richardson was builder of the Paddle Steamer Curlip.The Richardson family was one of the very early settler families to establish themselves in the Orbost district. Samuel Richardson was builder of the Paddle Steamer Curlip. This is a useful reference tool.A C.D. of the Richardson Collection of diaries and ledgers dated 1878-1935. It contains information of the Richardson families in Orbost and the Ballarat district in Victoria. On the front is a photograph of a seated Samuel Richardson with a paper in hand. The disc is in a clear orange plastic case.richardson-samuel orbost-history p.s.curlip

This house was once the residence of Jules Lake, inaugural member of the Lakes Entrance RSL. A boat builder, he lost a leg on WW1 service.Colour photograph of timber house in Barkes Avenue. Corrugated iron roof, gablet ventilator on ridge. Window has metal window shade. White picket fence. Lakes Entrance Victoriahouses, heritage study

Builder: Evans Deakin and Company. Launched: 8 April 1967. 146 tons. Patrol boat visited Port Fairy in 1979 & 1980First boat in its class for RANColoured photograph of Ship moored in Port Fairy baydefence force, patrol boat, hmas attack, port fairy

Pittock coach builder's box, 15 assorted chisels located in assigned locations at the front of the box: * 12 steel chisels with wooden handles in various stages of use, and 3 cold steel cold chisels * some chisels have manufacturer's marks, indistinguishable to read two chisels have P (Pittock) incised into the wooden handle * 4 straight chisels, 245-280 mm L, 10-23 mm cutting edges * 4 curved chisels, 245-320 mm L, 10-30 mm cutting edge * 2 cold chisels, 160-195 mm L * 1 steel punch, 165 mm L * 4 narrow bevelled eased chisels, 215-280 mm L, narrow cutting edges Items stored in Pittock coach builder's box, reference 13000.1.

Block mounted, black and white (sepia toned) photo of Ballarat Horse Tram No. 1 outside the Wendouree Parade depot, late 1887, with 16 workmen standing or lying around the tramcar. Builders Photo. Tram is lettered "BALLAARAT TRAMWAY CO LIMITED". A sign on the advertising board says "Duncan & Fraser, Builders, Ballaarat". The men around the tram are dressed in trade clothes, including carpenters, painters and blacksmiths. Mounted on to preprinted card with a printed border and along the bottom edge "Richards & Co." and "Photo". See also Reg Items 1654 and 765 for different prints of the same photo. 3042.1 - Same photo, but in better condition. Has "Richards & Co Photo" on stamped on left hand side and has a red border similar to the Reg. Item 3042, but has been cut around it. See Reg item 4480 for details of some of the people around the tram.On rear in pencil "Coulter" and in pencil "Coulter to call again"tramways, trams, ballaarat tramway company, horse trams, depot, duncan & fraser, tram 1

Site of former Sunday school c 1990.Adverting sign from Monaghan's Real Estate with image of the houses.LUXURY HOME UNITS Six to be erected on this site. Monaghen's Real Estate Pty Ltd. 189 Main St. Stawell Ph. 053 581300 anytime. Builders W. Tuttle Project Homes Ph. 584123stawell religion

A source book of ideas for owner-builders on the design and construction of mud brick houses from all over Australia from the 198th and 20th centuriesSigned black ink "J. Connor" inside face pageadobe buildings, earth houses, mud brick building, mud brick construction, pise construction

1890 Boxing Day Picnic - Ticket and Butt. A.N. A. Picnic to Harcourt 'Undoubtedly the Greatest Carnival for the Christmas Season'.a.: T List of prizes and values. On reverse is advertisement for 'Sandhurst Rolling Stock Co., Premier Coach-builders; P Ellis, Manager. ANA Secretary - J H Curnow. b: Butt 'Retain this portion ; it may be the means of securing a valuable treasure'. (Different number to number on a.)organization, club/society, a.n.a

Pittock collection: thirteen assorted steel hacksaw blades * two coping saw blades, 170-305 mm L * seven hacksaw blades, various thicknesses, 265-320 L * three rough toothed blades, 185-255 mm L * one specialised modified saw blade, 80 mm L Items stored in Pittock coach builder's box, reference 13000.1.

Five miscellaneous steel tools: * one spanner, 205mm L x 50mm W, marked Fairmount Cleve, with W etched on reverse side * a pair of dividers, 130 mm L x 50 mm W (closed), discernible name marked on instrument * three miscellaneous tools, 122-232 mm long Items stored in Pittock coach builders box, reference 13000.

Yields information about the construction of Ballarat B Power station that was used to augment and replace the A Power station and the building of it.Digital Image of an article about the construction of Ballarat B Power station in The Courier, 14/3/1953, from a photocopy of the article obtained by Alan Bradley. Gives details of the power station, the builder (Westinghouse International Electric Company) and the Mildura and Geelong package power stations. Has two photographs of the station under construction. See Alan's email of 21/12/2011 in the worksheet file.trams, tramways, ballarat b power station, power supply, geelong, westinghouse

6 Sea Breezes index, 5 Sea Breezes, 8 Blue Peter, 117 Port of Melbourne, The Shipbuilder and Marine Engine Builder June 1936?The Good Old Sailing Days Author: Ropeyarn Publisher; Cassell & Company Limited flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, the good old sailing days, book

Description of a Tasmanian Style of domestic architecture as developed by colonial builders and the occasional architect. Boyd admires the ingenuous nature of these buildings, describing Tasmania as a living museum.Published as ‘Tasmania – The Houses’, pp.15 - 16 in 'Priceless Heritage: Historic Buildings of Tasmania', Platypus Publications, Hobart. 1964 Typewritten (c copy), quarto, 4 pagestasmania, colonial georgian, robin boyd, manuscript

Final account for the construction of 290 Walsh Street from the builder John Murphy. This document is owned by the Murphy family and was provided to the Robin Boyd Foundation for digitisation.Final account for the construction of 290 Walsh Street.