The Murray Region Hydroelectric Power Stations are two of seven hydro power stations, located near Khancoban in NSW. The two power stations are part of the Snowy Mountains Hydro-electricity Scheme, which is an extensive hydroelectricity and irrigation complex constructed in south-east Australia between 1949 and 1974 and now run by Snowy Hydro. Although both power stations are located in NSW, since 1 July 2008 all power generated has been allocated to the Victorian region of the National Electricity Market. Murray 2 Power Station was the first in the Snowy Scheme to use Japanese supplied large electrical and mechanical components Photographs demonstrate local Kiewa Valley residents enjoying an educational visit to Murray 2 Power Station which holds significance to the early history of the Hydro-electric Scheme in the area. Also demonstrates a pictorial history of social activities undertaken during this periodBlack and white photograph mounted on buff card Bus tour to Murray 2 Power Station showing 2 buses and group of Kiewa Valley residentsHandwritten in blue ink above photo "Snapshots Clare Roper' Handwritten in black ink below photo "Bus tour to Murray 2 Power Station'kiewa valley residents, clare roper

VR Commissioner's Special train, steam locomotive D3-639 crossing the Echuca-Moama Road Rail Bridge over the Murray River from Moama, NSW to Echuca, Victoria. Commissioner Edgar Henry Brownbill on footplate, 1962. Commissioner Edgar Henry Brownbill was in office 1957 to 1967. George Coop advises - "The train on the Eltham/Moama bridge is actually the Commissioner’s Special on one of its inspection tours of the VR rail system. This was a very grand special train with accommodation for the Commissioner and staff in carriages also used once for the Royal Train and other State purposes. You can just see the Commissioner of the day, dressed in his suit and wearing engine drivers gloves, standing in the loco cab doorway. A good ‘hands on’ impression is created amongst local staff if can be seen that the boss is no ‘desk jockjey’. The observation car on the back was originally made for the ’Spirit of Progress’. I climbed up onto the bridge iron plate work to get this view. It was safe enough as the cantilevered pedestrian walkway was still on the east side at the time." "I was resident in Echuca from Jan. ’59 to approx. May ’64. At that time the single Echuca/Moama bridge was a combined road/rail bridge. The rail gauge was 5’3” and still is, I believe, on the new bridge that sits just upstream of the old one. This rail line into NSW has always been 5’3" gauge because it has no connection with any NSW tracks. The old Echuca/Moama bridge, locally called the ‘Iron Bridge’ has, over years, undergone some structural changes. The two lattice iron hoops arcing over the roadway have been raised and lowered and changed design. Presently a pedestrian walkway is cantilevered off the west (or downstream) side of the bridge. It used to be on the eastern side. Guess changes went in when new rail bridge only was built on the eastern side as well." Image dated as c.1963 based on same image in Port of Echuca collection (possibly frame 32 of film) (print 19.5 x 24.5cm) On reverse in pencil: "Brown card" in black pen: "Commissioners special. F. Brown on Footplate. George C.L. Coop c1963". https://victoriancollections.net.au/items/59d575b921ea6e1278d78042 However based on frame no. 10, date set as 1962Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencyd3-639, d3-class steam locomotive, echuca-moama road rail bridge, edgar henry brownbill, george coop collection, murray river, vr commissioner's special train

A colour photograph of Murchison Street in Marysville in Victoria.A colour photograph of Pack Road in Marysville in Victoria. Labeling is incorrect. View is down Murchison Street towards Barton Bridge. In the background can be seen the rectory from the Church of England. The rectory survived the 2009 Black Saturday bushfires whilst the church was destroyed. This postcard was produced by Colorscans Publishing as a souvenir of Marysville.Colorscans c PUBLISHED & PRINTED BY COLORSCANS (PUBLISHING) PTY LTD 118-120 BRIGHTON STREET, RICHMOND 3121/ Supa-vu/ cards MARYSVILLE - VICTORIA/ Pack Road, Marysville Photographed and Distributed by:/ K & H. Ellis - 35 Old Warburton Road,/ Warburton 3799marysville, victoria, pack road, murchison street, postcard, souvenir, colorscans publishing, k & h ellis, 2009 black saturday bushfires, church of england

This large wooden sign was originally attached to the barge D26 which was one of the 4 barges used to carry logs behind the PS Adelaide. The D indicated that it was the fourth barge to be built in 1926 by Murray River Sawmills. The number represented the year it was built.This original timber piece, salvaged from the D26 barge is an important relic from an original outrigger logging barge from the early 20th century, one of the last logging barges built as the Murray River timber trade was declining. The barge was restored by the Port's chief shipwright Kevin Hutchinson with assistance from Laurie Rendle and Alan Battsch. and the PS Adelaide is also a significant feature in the Port's collection. Large red gum timber signD 26d26, barge, logging industry, murray river sawmills, ps adelaide

Cloth badge for sewing onto a jacket featuring a printed image of Ballarat Vintage Tramway No. 26 on a green and white background with a sewn red border. The badge has been backed onto a piece of stiff cloth and the red sewn border edge secured with a piece of adhesive tape. Produced by K. F. Williams of Hoddle St. Richmond in Dec. 1991 and advertised as being available for sale at the depot in Jan 1992 issue of Fares Please! Copy of sheet in Fares Please! and notes regarding production, costs, number ordered included with the worksheet. See C. Deans notes of 8/7/2003 - email. tram, trams, badges, btm, cloth badges, souvenirs

Metal lapel badge, gold finish with either a light or dark blue gloss enamel paint background around letters, for the "Malvern Tramways Football Club". Has bird standing on a branch as part of the badge. A metal insert which can be changed over to show the year of membership shows the year "54". Metal insert has two lugs on the rear which can be folded over. On the rear is a metal pin that can be put vertically through a jacket and the manufacturers name "K. Luke Melb". The clasp for the pin has been closed so the pin cannot be opened. See Reg item 1634 for another version.trams, tramways, football, malvern depot, sports, social club, badges

Coloured Postcard Murray Views No. 7. Cato Park Stawell Victoria. The three black and white photos are missing the larger palm tree on the right in the foreground. The view is of the lake surrounded by trees and bench seating. One colour post card Murray View No 7 Cato Park Stawell Victoria plus two similar black & white photos one smaller the other an enlargement. Also a small B&W photograph in Album 14, p28. The post card is a view of a section of the lake surrounded by willows, 2 tall pine trees and one large palm tree on the right. The lake is also surrounded by 3 concrete & wood bench seats with maybe a 4th in the distance. Murray View No 7 Cato Park Stawell Vic. On the back "Post Card Real Photograph produced in Australia by Murray View, Gympie, Q".stawell

Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencygeorge coop collection, railway workshop, seymour, seymour railway station, k-162, k-class steam locomotive (vr newport workshops), railway turntable

Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencygeorge coop collection, railway workshop, seymour, seymour railway station, railway turntable, d3-676, d3-class steam locomotive, k-186, k-class steam locomotive (vr newport workshops)

THE ECHUCA COALING STAGE. Locomotives would stop alongside to receive coal dropped into their tenders from small overhead rail mounted tipping trays. Water could be obtained from either the elevated tank at one end or the connected standpipe at the opposite end. Locomotive firebox contents could be dumped into pits between the rails from locomotives once they were carefully positioned above them. Such locomotives then could move onto the Engine Shed area for overnight parking. Firebox fires would be re-lit when the locomotive was next needed in a day or so.Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencygeorge coop collection, echuca railway station, k-185, k-class steam locomotive (vr newport workshops), railway workshop

Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencygeorge coop collection, echuca railway station, railway workshop, j-508, j-class steam locomotive (vulcan foundry), k-185, k-class steam locomotive (vr newport workshops), r-727, r-class steam locomotive

Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencygeorge coop collection, echuca railway station, railway workshop, j-508, j-class steam locomotive (vulcan foundry), k-185, k-class steam locomotive (vr newport workshops)

This is a road and rail connection to Yea, Mansfield and Alexandra from Tallarook, Vic. The railway was converted many years ago into a long and spectacular rail trail. Photograph by George Burton Coop (George Coop's father).Digital TIFF file Scan of Kopdak 620 black and white negative transparencygeorge coop collection, k-157, k-class steam locomotive (vr newport workshops), trawool gap

This is a road and rail connection to Yea, Mansfield and Alexandra from Tallarook, Vic. The railway was converted many years ago into a long and spectacular rail trail. Photograph by George Burton Coop (George Coop's father).Digital TIFF file Scan of Kopdak 620 black and white negative transparencygeorge coop collection, k-157, k-class steam locomotive (vr newport workshops), trawool gap

Interior of Bendigo Locomotive Depot. This was one of a number of photographs taken during two visits by George Coop between October and November 1962, arranged with the assistance of VR staff.Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencygeorge coop collection, bendigo, bendigo railway station, d3-640, d3-class steam locomotive, k-168, k-class steam locomotive (vr newport workshops), r-704, railway turntable, railway workshop, r-class steam locomotive

Leaving the Echuca yards and charging up the hill approaching the Iron Bridge. Standing to the left is the Fruit Fly Inspector who was once a common sight at the NSW/Victorian border crossings.Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencygeorge coop collection, echuca, echuca railway station, fruit fly inspection, k-173, k-class steam locomotive (vr newport workshops)

Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencygeorge coop collection, ararat locomotive shed, k-153, k-class steam locomotive (vr newport workshops)

Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencygeorge coop collection, ararat locomotive shed, k-174, k-class steam locomotive (vr newport workshops)

Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencygeorge coop collection, ararat locomotive shed, k-153, k-class steam locomotive (vr newport workshops)

Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencygeorge coop collection, ararat locomotive shed, j-class steam locomotive (vulcan foundry), k-174, k-class steam locomotive (vr newport workshops), j-541

It is the railway bridge over the Campaspe River at Rochester, Vic. original to the construction of the line. It was taken late on a Saturday morning and shows the regular goods train of that period approaching, then crossing the bridge. I originally planned to take just one view. The approaching train was first then it was a rapid run back along the raised river bank to get the broadside shot. I had little time to steady myself or properly check camera settings, hence the slightly soft focus etc. The train would eventually continue over the Echuca Iron Bridge into NSW. I think its ultimate destination was Deniliquin but not sure.Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencygeorge coop collection, k-158, k-class steam locomotive (vr newport workshops), railway bridge, campaspe river, rochester

Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencyechuca railway station, george coop collection, k-158, k-class steam locomotive (vr newport workshops)

THE ECHUCA COALING STAGE. Locomotives would stop alongside to receive coal dropped into their tenders from small overhead rail mounted tipping trays. Water could be obtained from either the elevated tank at one end or the connected standpipe at the opposite end. Locomotive firebox contents could be dumped into pits between the rails from locomotives once they were carefully positioned above them. Such locomotives then could move onto the Engine Shed area for overnight parking. Firebox fires would be re-lit when the locomotive was next needed in a day or so.Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencycoal hopper, echuca railway station, george coop collection, k-158, k-class steam locomotive (vr newport workshops)

Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencycoal hopper, echuca railway station, george coop collection, k-158, k-class steam locomotive (vr newport workshops)

Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencycoal hopper, echuca railway station, george coop collection, k-158, k-class steam locomotive (vr newport workshops)

Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencyechuca-moama road rail bridge, george coop collection, goods train, k-158, k-class steam locomotive (vr newport workshops)

Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencyechuca railway station, george coop collection, j-513, j-class steam locomotive (vulcan foundry), k-155, k-class steam locomotive (vr newport workshops), locomotive depot workshop, r-727, railway workshop, r-class steam locomotive