Booklet of postcards: old images reproduced. , The Mall showing Alexandra Fountain Building, Mining Bendigo, Pall Mall & Law Courts, Bendigo looking towards Mitchell Street, Alexandra Fountain, Bendigo, Chinese Dragon 'Loong' 180 ft. long, made in China, Shamrock Hotel, Williamston Street, Bendigo. On rear of cards ; Rose Series De Luxe, proudly printed in Australia since 1880.. / One card has a photo of the Duchess tribute Company minebendigo, streetscape, various views, bendigo, streetscapes

1929 dated four page brochure advertising that Bendigo was an ideal centre for secondary industry. Interior view of Railway workshops, Law Courts, and a typical barren potential factory site. Hundreds of such sites gravitating towards railway station advertised. Australia wants secondary industry come to Bendigo. Bendigo is geographically situated to become the Manchester of Victoria.Advance Bendigo and the North Leaguebook, bendigo, bendigo, bendigo industry

2 posters headlined ''NOTICE!!'' urging ' all subjects of the Queen, and all strangers who have received hospitality and protection under Her flag, to assist in preserving SOCIAL ORDER and Maintaining the Supremacy of the Law.' 'All faithful subjects, and all strangers who have had equal rights extended to them, are therefore called upon to 'ENROL THEMSELVES and be prepared to assemble at such places as may be appointed by the Civic Authorities in Melbourne and Geelong, and by the Magistrates in the several towns of the Colony.' This is a response to ' recent events at the Mines at Ballarat.' The call is by Chas Hotham. John Ferres Government Printer.The call is by Chas Hotham. John Ferres Government Printer.history, australian, law, lydia chancellor, collection, history, ballaarat, australian history, gold, goldfields, gold mines, gold mining

Some Ithacans on arrival in Melbourne moved to the larger regional country towns and opened food vending businesses. John (Ioannis) Raftopoulos (Fiakas) was one such Ithacan who established himself in Mildura. He opened the Sport Cafe in Langtree Avenue. The Spot was an elegant and sophisticated establishment and as well as serving meals, also served the latest sundaes and cool fountain drinks. By the late 1930s he had also opened a milk bar in Mildura’s Astor Theatre. Raftopoulos was a true entrepreneur and ran a number of business in the Mildura and Red Cliffs. John's father, Efstathios Raftopoulos (Levendis) arrived in Australia in 1895 and John soon followed. John's brother-in-law Dimitrios Vlassopoulos arrived from Ithaca in 1922 and opened the Golden Key Café in Red Cliffs. Dimitrios had previously spent about 10 years in America where he gain knowledge and experience in the food and hospitality business. The Golden Key Café shared similarities with the Spot Sundae ‘Parlor’. Ithacan settlement in Mildura area dates back to the early 1900s. A black and white photograph of the interior of a cafe. There are five waitresses and two waiters; three of the women are behind a counter and the other two are standing beside the tables which are lined up on either side of the restaurant. One of the waiters is at the rear is behind a counter while the other is in the background. The restaurant is adorned with Christmas decorations and potted plants.

Certificate for Second Prize in Eaglehawk Australian Natives Association Musical and Elocutionary Competitions in 1908. Certificate is printed on cream coloured card with gold and red illustrations and writing. At the top is the crest of the Australian Natives Associaation with the words Branch and No 37 either side. The year 1908 and the words Eaglehawk and Australian Natives Association Musical and Elocutionary Competitions are printed within scrollwork below. A figure dressed in robes holding a laurel wreath and trumpet is standing on the right hand side. Certificate and Second Prize awarded to Miss Kathleen Foster for Piano Duet Open are printed and written below.Herbert Woodhouse lith, Law Courts Place Melbournedocument, certificate, music

Documents quoted, p.219.non-fictionA brief account of how although slandered by Australian security the widow of Dr Clifford Dalton, inventor of the first fast breeder reactor, eventually succeeded in winning herself the protection of Australian law.dr clifford dalton -, human rights - australia, espionage - australia

ill (maps) (b/w), index, bibliography, p.302non-fictionBrigadier Lachlan Wilson was one of Queensland's leading legal figures between the wars, he also was a long serving citizen soldier who served both in the Boer war and the campaigns in Palestine in World War I. This biography examines his achievements in both of those fieldsbiography - generals - australia, south african war 1899-1902, world war i 1914 1918, campaigns - gallipoli, campaigns - palestine

Article titled The Bendigo Post Office, compiled by L C Bennetts. Mentioned is the history of the Bendigo Post Office and postmarks, some information on mining, Bendigo foundries, Underground connections of mines, expenses and shaft sinking costs. Also mentioned is Bendigo and Eaglehawk - 60 years ago and the role the pubs played in daily living. They were where theatres, concerts and dances were held, and the meeting rooms for clubs and lodges, even church benefits. Listed is a number of Bendigo hotels. Some even had a few names. Names of the pubs are: The Freemasons, The Courthouse, The Commercial Law Courts, The Hamburg, The European, The Prince Bismark, The Lord Kitchener, The Bendigo, The Rosalind Park, The Showgrounds, Atheneum Club, Olivers, Bridge Hotel, Bourkes, The Globe, The Hibernia, Albert, Albion, Abbotts, Australian, Belvidere, Beehive, British Queen, Black Eagle, British and American, Brian Boru, Bakers Arms, Butchers Arms, Brick Layers Arms, Bull and Mouth, Cresent, Clarence, Back Creek Bridge, Cape Clear, Crooked Billet, Cambridgeshire Arms, Camp, Coach and Horses, Cricketers Arms, Diggers Rest, Ellesmere, Five Lions, Franklyn, Golden Square, Golden Gate, Golden Gully, Golden Age, Golden Vine, Gumtree, Glasgow Reef, Great Britain, Haymarket, Daniel O'Connell, Half Way House, Fleece Inn, Ironbark, Johnsons Reef, Lancashire, Live and Let Live, Manchester Arms, Gold Mines, Metropolitan, Crown, National, New Chum, Honeysuckle Street, Pavilion, Napier Arms, Quartz Miners Arms, Retreat Inn, Rainbow, Rose of Australia, Lake View, Robin Hood, Fountain, Southern Cross, Bath, Berlin, Spring Gully, Star, Sir Charles Hotham, Silvermines, Royal Oak, Suburban, Town Hall, Temperance, Ship Inn, View Point, View Bend, Victoria, Exchange, American, Arcade, Belfast, All Nations, Union, United Kingdom, Union Jack, Westend, Washington, Waterloo, Wellington, Whitehorse, Wheat Sheaf, Yorkshire, Niagra and Noahs Ark.bendigo, history, long gully history group, the long gully history group - the bendigo post office, l c bennetts, mt alexander post office, porcupine inn, cenotaph, pike or pyke, baby health centre, sandhurst post office, government survey office, queen elizabeth oval, sandhurst trustees company, mr h b briston, savings bank, telegraph office, the sub-treasury, sir henry brougham lock kcb, sir john nimmo mla, prince of wales group of mines, the new prince of wales, eaglehawk golf links, new prince of wales no 2, the whip and jersey, mines department, lansell's big 180, new chum and victoria mine and battery, new chum railway, koch's pioneer, south new moon, catherine reef united, new moon, the virginia, south bell vue, central nell gwynne, north nell gwynne, miner's phthisis, hercules engine house, ironbark, new chum syncline, hercules energetic, roberts & sons, harkness & co, horwoods, great southern, ulster, carlisle, lansells big 180, victoria quartz, new st mungo, duchess tribute, south devonshire, hopewell mine, saxby mine, mcnair & co, shamrock, mr king, burke and wills expedition, sandhurst hotel, courthouse, hiberian, the freemasons, the courthouse, the commercial law courts, the hamburg, the european, the prince bismark, the lord kitchener, the bendigo, the rosalind park, the showgrounds, atheneum club, olivers, bridge hotel, bourkes, the globe, the hibernia, albert, albion, abbotts, australian, belvidere, beehive, british queen, black eagle, british and american, brian boru, bakers arms, butchers arms, brick layers arms, bull and mouth, cresent, clarence, back creek bridge, cape clear, crooked billet, cambridgeshire arms, camp, coach and horses, cricketers arms, diggers rest, ellesmere, five lions, franklyn, golden square, golden gate, golden gully, golden age, golden vine, gumtree, glasgow reef, great britain, haymarket, daniel o'connell, half way house, fleece inn, ironbark, johnsons reef, lancashire, live and let live, manchester arms, gold mines, metropolitan, crown, national, new chum, honeysuckle street, pavilion, napier arms, quartz miners arms, retreat inn, rainbow, rose of australia, lake view, robin hood, fountain, southern cross, bath, berlin, spring gully, star, sir charles hotham, silvermines, royal oak, suburban, town hall, temperance, ship inn, view point, view bend, victoria, exchange, american, arcade, belfast, all nations, union, united kingdom, union jack, westend, washington, waterloo, wellington, whitehorse, wheat sheaf, yorkshire, niagra, noahs ark

Articles for RHSV Bendigo Branch Newsletter March 1972; 1. Article in ''Federal Australian'' (Jan 1882) re undue delays erecting the St Mungo crushing battery; 2. ''Moans and Groans'' re wages for miners and meeting at Royal Hotel of May 31st, 1873; reference to a Regulation of Mines law of Jan 1st 1874 (Angus McKay), margin note on handwritten copy states that ''Further information on (the) Act and the lot of the miners and engine drivers will be given in future issues of the Newsletter''; 3. Article with return and costs information about working on a claim - details of shaft and sinking - (Grant and??Co), adjacent to private Victoria Reef Quartz Co., later the Victoria Quartz.document, gold, mining in bendigo

Book, 382 pages, brown board cover: ' Geography Generalized or an Introduction to the Study of Geography on the principles of classification and comparison with many illustrations through maps and illustrations' On front page in black pen ' Jonathan William Harris 1886' and ' Australia' written twice in same. Over page 'Jonathan W. Harris, his uncle. A gift from P.J. Murphy, 34 Little Oxford St., Collingwood. Jonathan W. Harris, August 26th, 1873' Published by Marcus and John Sullivan, 27 Marlborough Street, London. 1864Robert Sullivan, Barrister at Law.person, individual, jonathan harris, axedale

This instrument was part of a collection of instruments used by Dr Michael Kloss, who was an obstetrician. Dr Kloss used this item in his own practice, before donating the item to the College. Dr Kloss is the son-in-law of Dr Fritz Duras (1896-1965), a doctor who moved to Australia from Germany in 1937. As his father was Jewish, Duras was forced to leave Germany, and Dr Duras came to Australia to take up a post as director of physical education at Melbourne University.Set of tissue forceps. Made of metal, the forceps resemble long tweezers, with a grip section and a small set of teeth at the end of each arm of the forceps. The proximal end of the forceps is engraved with the word 'Kloss'.'Kloss'obstetrics

This instrument was used by Dr Fritz Duras (1896-1965), who moved to Australia from Germany in 1937. As his father was Jewish, Duras was forced to leave Germany, and came to Australia to take up a post as director of physical education at Melbourne University. This instrument was part of a collection of instruments given to his son-in-law, Dr Michael Kloss, who was an obstetrician. Dr Kloss donated these items to the College. Metal needle holder. The needle holder's overall shape is that of a teardrop, with a rounded handle section narrowing to serrated grip points at one end. The needle holder appears to be made of a plated metal.obstetrics

This instrument was used by Dr Fritz Duras (1896-1965), who moved to Australia from Germany in 1937. As his father was Jewish, Duras was forced to leave Germany, and came to Australia to take up a post as director of physical education at Melbourne University. This instrument was part of a collection of instruments given to his son-in-law, Dr Michael Kloss, who was an obstetrician. Dr Kloss subsequently had it engraved and used it in his own practice, before donating the item to the College. Metal uterine catheter. Thin, curved instrument with two oval shaped fittings attached to the sides of the instrument at the proximal end for grip. There is a seam roughly halfway down the instrument indicating that the halves of the instrument can be separated. One side of the instrument is engraved with the word 'Kloss'.'Kloss'obstetrics

This instrument was used by Dr Fritz Duras (1896-1965), who moved to Australia from Germany in 1937. As his father was Jewish, Duras was forced to leave Germany, and came to Australia to take up a post as director of physical education at Melbourne University. This instrument was part of a collection of instruments given to his son-in-law, Dr Michael Kloss, who was an obstetrician. Dr Kloss subsequently donated this item to the College. Small metal uterine catheter. Thin, curved instrument with a brass coloured, bell shaped attachment at one end, curving to a hollow tip at the other end. There is a oval shaped fitting attached to the side of the bell attachment.obstetrics

This instrument was part of a collection of instruments used by Dr Michael Kloss, who was an obstetrician. Dr Kloss used this item in his own practice, before donating the item to the College. Dr Kloss is the son-in-law of Dr Fritz Duras (1896-1965), a doctor who moved to Australia from Germany in 1937. As his father was Jewish, Duras was forced to leave Germany, and Dr Duras came to Australia to take up a post as director of physical education at Melbourne University. Metal test tube holding instrument. Instrument resembles a pair of scissors, but with bowed prongs to allow for the grasping of a test tube between the prongs. The tip of each prong is also ridged for grip. The word 'Nickel' is engraved on the inner aspect of one of the prongs.'Nickel'

This instrument was used by Dr Fritz Duras (1896-1965), who moved to Australia from Germany in 1937. As his father was Jewish, Duras was forced to leave Germany, and came to Australia to take up a post as director of physical education at Melbourne University. This instrument was part of a collection of instruments given to his son-in-law, Dr Michael Kloss, who was an obstetrician. Dr Kloss subsequently had it engraved and used it in his own practice, before donating the item to the College. Metal uterine catheter. Catheter is in a vague 's' shape, with a rounded tip at one end and a hole in the catheter just above the tip. There is a small oval shaped attachment at the proximal end of the device for grip. One side of the instrument is engraved with the word 'Kloss'. Internal wire section may be missing from this catheter.'Kloss'obstetrics

This instrument was used by Dr Fritz Duras (1896-1965), who moved to Australia from Germany in 1937. As his father was Jewish, Duras was forced to leave Germany, and came to Australia to take up a post as director of physical education at Melbourne University. This instrument was part of a collection of instruments given to his son-in-law, Dr Michael Kloss, who was an obstetrician. Dr Kloss subsequently had it engraved and used it in his own practice, before donating the item to the College. Metal instrument used for cervical sutures. Instrument consists of a handle and shaft. The end of the shaft is curved so as the tip of the instrument is almost perpendicular to the handle. The end of the shaft is in the shape of a loop to allow for sutures to be passed through it. The handle of the instrument is engraved with the word 'KLOSS'.'KLOSS'obstetrics

This instrument was used by Dr Fritz Duras (1896-1965), who moved to Australia from Germany in 1937. As his father was Jewish, Duras was forced to leave Germany, and came to Australia to take up a post as director of physical education at Melbourne University. This instrument was part of a collection of instruments given to his son-in-law, Dr Michael Kloss, who was an obstetrician. Dr Kloss subsequently had it engraved and used it in his own practice, before donating the item to the College. Metal instrument used for cervical sutures. Instrument consists of a handle and shaft. The end of the shaft is curved so as the tip of the instrument is almost perpendicular to the handle. The end of the shaft is in the shape of a loop to allow for sutures to be passed through it. The handle of the instrument is engraved with the word 'KLOSS', and the words 'MAW/LONDON'.'KLOSS' 'MAW/LONDON'obstetrics

This instrument was used by Dr Fritz Duras (1896-1965), who moved to Australia from Germany in 1937. As his father was Jewish, Duras was forced to leave Germany, and came to Australia to take up a post as director of physical education at Melbourne University. Jetter and Scheerer were a surgical instrument maker founded in Germany in 1867. Their company symbol is that of a serpent curled around a rod, surmounted by a coronet/crown. This instrument was part of a collection of instruments given to his son-in-law, Dr Michael Kloss, who was an obstetrician. Dr Kloss subsequently had it engraved and used it in his own practice, before donating the item to the College. Metal instrument used for cervical sutures. Instrument consists of a handle and shaft. The end of the shaft is curved so as the tip of the instrument is almost perpendicular to the handle. The end of the shaft is in the shape of a loop to allow for sutures to be passed through it. The handle of the instrument is engraved with the word 'KLOSS'. The shaft of the needle is engraved with an image of the Rod of Asclepius, featuring a serpent wrapped around a staff, topped by a crown.'KLOSS' obstetrics

This instrument was used by Dr Fritz Duras (1896-1965), who moved to Australia from Germany in 1937. As his father was Jewish, Duras was forced to leave Germany, and came to Australia to take up a post as director of physical education at Melbourne University. This instrument was part of a collection of instruments given to his son-in-law, Dr Michael Kloss, who was an obstetrician. Dr Kloss subsequently had it engraved and used it in his own practice, before donating the item to the College.Metal needle holder. The needle holder's overall shape is that of a teardrop, with a rounded handle section narrowing to serrated grip points at one end. The needle holder appears to be made of a plated metal. There is a clasp at one end for locking the needle holder into place. A rounded tab on the inner aspect of the instrument is engraved with the number '50'. The word 'Kloss' is engraved on one side of the instrument, towards the points.'50' 'Kloss'obstetrics

This instrument was used by Dr Fritz Duras (1896-1965), who moved to Australia from Germany in 1937. As his father was Jewish, Duras was forced to leave Germany, and came to Australia to take up a post as director of physical education at Melbourne University. This instrument was part of a collection of instruments given to his son-in-law, Dr Michael Kloss, who was an obstetrician. Dr Kloss subsequently donated the collection to the College, after using many of the instruments in his own practice. Metal uterine catheter. Thin, small, curved instrument in the shape of a narrow tube. There is a lip at one end of the tube, which curves as it reaches a rounded tip at the other end. There are holes in either side of the tube just below the tip. A circular fitting is attached to one side of the instrument for grip, a little below the lip.obstetrics

For over eighty-five years, and from both sides of politics, the Commonwealth Government has provided support for servicemen and women. Whether it be soldier settlers' block, further education, specially fitted cars for limbless, habitation programs or financial support, Australians have been prepared in practical ways to help and compensate the men and women who have served their country in the armed forces especially in times of war.veterans - legal status, laws etc - australia, military pensions - australia

This photograph was taken of the debutantes and their partners presented at the annual debutante ball held at St Kilda Town Hall. This photograph is significant for its links to the Chinese Young League. The League was formally established on 4 October 1932 to to promote free social intercourse and goodwill among its members and their mutual improvement. Membership was open to all persons, with one or both parents or grandparents born in China. Wives of Chinese members were permitted as members with the same privileges. It was a significant social organisation for Chinese-Australians in Melbourne in the mid to late twentieth century.Black and white photograph (vintage) with cream frame under glass. Has a cream card mount which provides details of the ball and names the people in the photograph.Front of card title top centre: 'The Young Chinese League Annual Ball at St Kilda Town Hall, 1947'. Bottom centre: DEBUTANTES Back Row: Alex Chun Tie, Vernon Ah Mouy, Maurice Lee, Robert Kwong. Third Row: Harold Chin, Alan Lim Joon, Lennie Quon, Eric Moy, Edward Chin. Second Row: June Lee Gow, Evelyn Law, Annamae Young, Mrs L.M.Wang, June O'Hoy, Rose lee, Audrey Lau. Front Row: Jean Wing Dann, Marjorie Kwong, Connie Ham.'young chinese league, debutante balls, st kilda, melbourne

Phoenix Foundry Plate - replica Made about 2010 cast off original from locomotive Y112 The Phoenix Foundry (1857-1906) fabricated iron and brass products - including engines and pumping gear for the mining industry, locomotives, steam rollers, water pipes, water gauges and diverse small items. Throughout its operation the business was located at premises on Armstrong Street, Ballarat . Background In 1852, at the age of thirty-three and after a year of operating his own engineering business at Williamstown, Lancashire-born blacksmith and engineer George Threlfall (1819-1897) arrived on the Sebastopol gold plain and immediately undertook blacksmith work repairing picks and tools for the miners. Little did he know that this fledgling business would be the genesis of the most iconic business of nineteenth-century Ballarat. At approximately thirty-nine years of age, English mechanical engineer Richard Carter (c1814-1883) came to Australia on board the Arrogant - arriving in Melbourne on 19 April 1853. He soon travelled to the Ballarat goldfields. Born in the year 1830 in Belfast (Ireland), mechanical engineer William Henry Shaw (1830-1896) arrived in Australia in October 1853. He worked briefly with George Threlfall at Sebastopol, then moved to Geelong to manage the small foundry of Frederick Moore. Twenty-four year old English-born iron moulder Robert Holden (c1831-?) left his home in Belfast (Ireland) in late 1854 and travelled from Liverpool to Melbourne on board the James Baines - arriving in February 1855. Afterwards he joined his brother-in-law William Henry Shaw in Ballarat. History Foundation to Incorporation In March 1857 George Threlfall joined in business with Richard Carter, William Henry Shaw and Robert Holden. They relocated Threlfall's successful engineering enterprise from Sebastopol to new premises in Armstrong Street, Ballarat. This business was then known variously as the Phoenix Iron Works Company, Phoenix Foundry or Messrs Carter and Co. By 15 April 1857 they were advertising that they were open for business as engineers, millwrights, boiler makers, smiths, iron founders and brass founders. In January 1858 George Threlfall left the partnership. Incorporation to 1889 1890 to Closing locomotive Y112 Builder: Phoenix Foundry, Ballarat Builder’s Number & Year: 238 of 1889 Designer: Kitson & Co Wheel Arrangement: 0-6-0 No. in class: 31 Entered Service: 24 July 1889 Taken off Register: 11 May 1961 The origins of the Victorian Railways Y-class lay with the decision by Kitson & Co, Leeds to place a 0-6-0 freight locomotive on display at the Centennial International Exhibition, Melbourne in 1888, together with a 2-4-2T suburban passenger locomotive. This marketing initiative proved successful as the Victorian Railways were clearly impressed with these machines, with both purchased after the exhibition and becoming the patterns for new standard locomotive types. Thirty examples of the 0-6-0 heavy freight design were ordered from the Phoenix Foundry, Ballarat, becoming the Y-class for main line heavy freight duties, while the 2-4-2T design became the E-class for Melbourne suburban passenger duties (represented by preserved locomotive E 236). The Y-class prove successful in service and accrued high mileages. They were inevitably superseded by more modern and powerful steam locomotives and a number cascaded into shunting and yard pilot duties, often with the addition of shunters steps along both locomotive and tender. Y 112 was one of the last in service when withdrawn in 1961. Fortunately it was saved for preservation and plinthed in central Ballarat, ostensibly in commemoration of Phoenix Foundry. I understand it is owned by the Sovereign Hill Museums Association. During the 1980’s, Y 112 was leased to Steamrail Victoria and restored to operation at an industrial site in Ballarat. Y 112 features an attractive lined apple green livery and has performed various rail tours around Victoria since restoration. It is normally based at the Steamrail depot in Ballarat East. Y 112 is the only 19th century design in operational condition in Victoria and as such is one of the oldest working steam locomotive in Victoria . Historic - Phoenix Foundry Plate - replica Made about 2010 cast off original from locomotive Y112Phoenix Foundry Plate Oval shaped plate with an image of a phoenix centered at the top with lettering surrounding it.Phoenix Foundry No 238 Ballarat Company Limited 1889.puffing billy, phoenix foundry, ballarat, locomotive y112, phoenix foundry plate - replica

Double Headed Rail from Ravenswood Station Siding which was dismantled circa 1987 the two rails were stored for a time at Maldon before being donated to Puffing Billy Museum Bearing makers marks of Wilson & Cammell - Dronfield- Steel works Wilson & Cammell made Steel rails at their Dronfield Steel Works, in Dronfield, North East Derbyshire, England from 1872 - 1883 Double-headed rail In late 1830s Britain, railway lines had a vast range of different patterns. One of the earliest lines to use double-headed rail was the London and Birmingham Railway, which had offered a prize for the best design. This rail was supported by chairs and the head and foot of the rail had the same profile. The supposed advantage was that, when the head became worn, the rail could be turned over and re-used. In practice, this form of recycling was not very successful as the chair caused dents in the lower surface, and double-headed rail evolved into bullhead rail in which the head was more substantial than the foot. Info from Wikipedia - Rail Profile https://en.wikipedia.org/wiki/Rail_profile The first records of double headed rail being used In Victoria by Victorian Railways was in 1859, the rails, chairs, oak and trenails were imported from UK. After the 1870’s the Victorian Railways went over to using flat bottom rails, but they still needed replacement double headed rail for lines already laid and this continued up to at least 1883 Wilson & Cammell - Dronfield- Steel works Wilson & Cammell made Steel rails at their Dronfield Steel Works, in Dronfield England from 1872 - 1883 Mount Alexander & Murray River Railway The Melbourne, Mount Alexander & Murray River Railway Company received parliamentary assent in February 1853 to build Victoria's first inland railway from Melbourne to Williamstown, and Melbourne to Bendigo and Echuca. Construction commenced in January 1854 with work on a pier at Williamstown but lack of funds slowed progress, eventually prompting the company to sell out to the government. The 100-mile (162 km) section to Bendigo opened in October 1862. Its cost of £35,000 per mile made it the most expensive railway ever built in Australia. In 1864, the line was extended to Echuca, tapping into the booming Murray-Darling paddlesteamer trade. info from Museums Victoria - Victorian Railways https://museumsvictoria.com.au/railways/theme.aspx?lvl=3&IRN=450&gall=456 1863 Ravenswood Station open on the 1st Feb 1863 Victorian Railways - purchased and imported the Rail and Chairs from Raleigh, Dalgleish, White and Co. London Importation of railway plant : abstract of a return to an order of the Legislative Assembly dated 27th June 1860 for - Copies of the advertisements calling for tenders, the names of the tenderers and the accounts and correspondence with Mr Brunel relating thereto GP V 1859/60 no. C 15 http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoC15.pdf Report from the Select Committee upon the Importation of Railway Plant : together with proceedings of the Committee, minutes of evidence and appendix GP V 1859/60 no. D 38 (2.9 MB) http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoD38.pdf Ravenswood Siding When the Victorian Railways were established in 1856 they adopted one of the popular British permanent way standards - heavy 80lb (36.3kg) double-headed rail held up right in cast iron chairs attached to transverse timber sleepers by wooden pegs called trenails. The Ravenswood Railway siding was constructed in 1862 with 12 feet wrought iron double-head rail held in cast iron chairs with Ransom and May patent compressed keys. Trenails held the chairs to the sleepers and the joints were secured in joint chairs. Joints were subsequently joined using fish plates. It formed part of the Melbourne to Echuca rail line, initially known as the Melbourne, Mt Alexander and Murray River Railway. George Christian Derbyshire, the first Engineer-in-Chair of the Victorian Railways was responsible for the design and construction of the works. No new lines were built in Victoria using double-headed rail after 1870. The siding was disconnected from the main line in 1988. The Ravenswood Railway Siding demonstrates the original 1856 philosophy of the Victorian Railways to adopt British permanent way technology. The siding demonstrates significant aspects in the development of permanent way technology in England and Victoria over the period from the 1830's to the 1880's. The chairs in the Ravenswood siding are physical evidence of early railway technology rendered obsolete 120 years ago, namely joint chairs at rail joints and trenails to secure the chairs to the sleepers. The double-headed rail demonstrates an important stage in the evolution of British rail technology in the 1830s. The old fish plates, square headed bolts and square nuts demonstrate the success of fishing the rail joins. The Ravenswood siding demonstrates the earliest form of rail joint technology developed in England, and existing in Australia, the joint chair. In part of the siding the sequence of joint and intermediate chairs is consistent with the 1856 specifications, that sequence is rare with the joints secured in joint chairs. The survival of chairs in this sequence is rare and almost certainly demonstrates that they remained in continuous use at the same location from 1862 to 1988. This remnant of the Ravenswood siding has survived 126 years. The siding has proved to be the most significant of extant remnant double-headed sidings in Victoria, containing a rare combination of early permanent way technologies. Construction dates 1862, Info from Ravenswood Railway Siding Victorian Heritage Database Report http://vhd.heritagecouncil.vic.gov.au/places/4693/download-report The remaining section of this siding is significant at the State and National levels in that it demonstrates the use of chaired rail by the Victorian Railways Department for the Trunk Lines and, more particularly, the following stages in the evolution of this long obsolete method of permanent way construction: a) The use of joint chairs and intermediate chairs at regular intervals inferring that the original wrought iron rail lengths were 12 feet, as is known through documentary sources to have been the case. The survival of chairs in this sequence is unique and almost certainly demonstrates that they have remained in continuous use at the same location and in the same sequence from 1862 to 1988 . b) The use of joint chairs and intermediate chairs designed for use with trenails. c) The use of later intermediate chairs designed for use with steel pins and the use of fished joints with steel double head chaired rail, representing a second method of constructing the permanent way using chaired rail technology. info from Ravenswood Siding - Melbourne/Echuca Railway Line - Victorian Heritage Database Report http://vhd.heritagecouncil.vic.gov.au/places/70103/download-report Addition to Citation for Melbourne to EchucaRailway Line 1/10/1990 Double Head Rail The surviving lengths of double head rail with chairs on this railway compare with one surviving similar remnant on the Geelong to Ballarat railway and are representative of permanent way construction techniques applied exclusively to the two trunk railways of the 1860's. In this respect they are rare survivors and may be unique at the national level and of technical importance at the international level to the extent that they enhance contemporary understanding of early railway building technology. Surviving lengths of chaired double head rail survive at Kyneton, Ravenswood and Bendigo on this railway and include a number of different types of cast iron intermediate and joint chairs with hardwood keys and metal pins. The Ravenswood siding is of special significance for the diversity of chair types and for the sequence of chairs recalling rail lengths known to be associated with construction of the line in 1862. Construction of the Railway Tenders closed on 24 March 1858 with no less than 133 tenders being received. A contract was let to Cornish and Bruce for £3,356,937 to commence work on 1 June 1858 and complete the line by 31 July 1861. Cornish and Bruce made quick early progress with the Melbourne to Sunbury section being officially opened on 13 January 1859. The line was officially opened to Bendigo (Sandhurst) on 20 October 1862 by the Governor of Victoria, Sir Henry Barkly. A great banquet was held for 800 guests and this was followed by a grand ball. The extension of the line to Echuca was a relatively simple matter as that part of the line was across plain country without any significant engineering challenges. Tenders were called for the work in 1863 and the work was completed in 1864 by contractors Collier and Barry Apart from the line contractors, other firms directly involved were J Shire law and Co (sleepers), R Fulton, Langlands Brothers and Co, William Crossley (water supply), B Moreland, Langlands Brothers and Co (platelayers lorries), E Chambers (iron pins, traversers), Miller and McQuinstan (luggage vans and steam engines) and various contractors for building works. Info from Engineers Australia Engineering Heritage Victoria Nomination for Recognition under the Engineering Heritage Australia Heritage Recognition Program for the Goldfields Railways - Melbourne , Bendigo & Echuca Railway Page 25 - .2.9.2 Statement from National Trust of Australia (Victoria) Listing number B5323 for Mt Alexander/Murray Valley Rail Line: Page 69 - Theme 3 https://www.engineersaustralia.org.au/portal/system/files/engineering-heritage-australia/nomination-title/Melbourne_%20Bendigo_Echuca%20Railway%20Nomination.pdf The Melbourne, Mount Alexander and Murray River Railway Company was a railway company in Victoria, Australia. It was established on 8 February 1853 to build a railway from Melbourne to Echuca on the Victorian-NSW border and a branch railway to Williamstown. The company struggled to make any progress and on 23 May 1856, the colonial Government took over the Company and it became part of the newly established Department of Railways, part of the Board of Land and Works. The Department of Railways became Victorian Railways in 1859. Construction of the Bendigo line commenced in 1858, but this private consortium also met with financial difficulties when it was unable to raise sufficient funds, and was bought out by the Victorian colonial government. The design work was then taken over by Captain Andrew Clarke, R. E., Surveyor-General of Victoria, with bridge designs completed by Bryson and O'Hara The contract for the first stage of the line from Footscray to Sandhurst (now Bendigo), was let to Cornish and Bruce for £3,356,937.2s.2d ($6.714 million) with work commencing on 1 June 1858. Completion of the permanent way was to be by 31 July 1861 https://en.wikipedia.org/wiki/Melbourne,_Mount_Alexander_and_Murray_River_Railway_Company Victorian Railways - purchased and imported the Rail and Chairs from Raleigh, Dalgleish, White and Co. London Importation of railway plant : abstract of a return to an order of the Legislative Assembly dated 27th June 1860 for - Copies of the advertisements calling for tenders, the names of the tenderers and the accounts and correspondence with Mr Brunel relating thereto GP V 1859/60 no. C 15 http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoC15.pdf Report from the Select Committee upon the Importation of Railway Plant : together with proceedings of the Committee, minutes of evidence and appendix GP V 1859/60 no. D 38 (2.9 MB) http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoD38.pdf Victorian Railways : report of the Board of Land and Works November 1862 GP V 1862/63 no. 21 (2.8 MB) https://www.parliament.vic.gov.au/papers/govpub/VPARL1862-63No21.pdfHistoric - Victorian Railways - Double Headed rail Ravenswood Railway Station and Siding Victorian Heritage Database Reports Victorian Heritage Register VHR H1100 Victorian Heritage Register VHR H1786 National Trust VHR H1100 Mount Alexander and Murray River Rail way Line National Trust2 rail lengths of Double Headed Rail made of Iron makers marks : Wilson & Cammell - Dronfield - Steel and 20 joint chairs with metal rail pins Makers mark Wilson & Cammell - Dronfield - Steel (possible date 187? very hard to read ) puffing billy, double headed rail, wilson & cammell - dronfield - steel works, ravenswood station siding, melbourne to echuca rail line, initially known as the melbourne, mt alexander and murray river railway.