This Farrand & Votey pump organ was manufactured in Detroit USA c1885. It was lovingly restored by the late Peter Frost of Tallangatta. The organ was gifted to Peter in 2000 in a state of disrepair and was not working. Peter was born in Devon, England in 1930 and completed an apprenticeship in joinery and cabinetry, specialising in ornate church and cathedral furniture. He migrated to Australia in 1957 and became a highly regarded woodwork and building science teacher as well as a Building Inspector. He was also a passionate musician. On completion of the refurbishment Peter gave the organ to his daughter at Georges Creek. Farrand & Votey started out as the Detroit Organ Co. in 1881. They started building pipe organs in 1888. Votey did pioneering work on piano players, developing the famous Pianola. However, in 1897 the company split up, Farrand remaining with the reed organs as the Farrand Organ Co., and Votey taking the pipe organ and player piano business. The Farrand Organ Co. later brought out its own piano player, the Cecilian, but went bankrupt in 1915.This organ is an example of a craftsmanship from the late 19th century and has been fully refurbished by a skilled craftsmen from the Tallangatta district near Wodonga.An upright Farrand & Votey Pump Organ which was originally manufactured in Detroit, USA. It has been fully refurbished and is in working condition. Ron Fudge, a pump organ restorer in USA has dated it at c.1885 based on its serial number 14404 83.Above keyboard: "Farrand & Votey"farrand & votey, pump organ, organ restoration

Kerosene Hand Pumpstawell

The water pump pressure gauges were used by the Wodonga Waterworks Trust and Sewerage Authority, which were established in 1897, and had the responsibility for providing Wodonga's drinking water and managing the wastewater. In 1923 a Wodonga Waterworks Trust referendum to provide funding for new infrastructure to supply more water of better quality to Wodonga was passed. This included building the Wodonga Water Tower and it was completed in 1924. It supplied water to Wodonga until 1959, when it was drained and decommissioned after the No 1 Basin on Huon Hill was completed in 1958. In 1983 the Wodonga Waterworks Trust and the Wodonga Sewerage Authority became part of the Wodonga Council. By 1989 a filtration plant at Huon Hill was completed, which provided filtered water of improved quality to Wodonga, in accordance with the World Health Organisation’s guidelines. In 1994 the Kiewa Murray Region Water Authority took over the Wodonga Council’s water and wastewater operations, and then in 1999 the Kiewa Murray Region Water Authority combined with the Ovens Region Water Authority and became the North East Region Water Authority or NERWA. NERWA then became known as North East Water.The water pump pressure gauges have local significance due to their use by the Wodonga Waterworks Trust and Sewerage Authority, and donation from the North East Region Water Authority. They also have wider historical significance as examples of the equipment used in the management of water in Victoria and Australia.Five metal and glass water pump pressure gauges, including one with a U-shaped pipe and lever attached. "-HOMPSONS (CASTLEMAINE) LT-" on pressure gauge no.1 "BOURDON'S / PRESSURE GAUGE / THE AUSTRAL OTIS /ENGINEERING Co. LD. / MELBOURNE" on pressure gauge no.2 "No. 1609 / POUNDS PRESSURE / PER SQ. INCH / FEET HEAD OF WATER" on pressure gauge no. 3 "FEET HEAD OF WATER / THOMPSONS (CASTLEMAI-- LTD" on pressure gauge no. 4 "SET SLOW 33' -" / BUDENBERG / MADE IN AUSTRALIA / ft water / 1 4 9 3 9 each number underlined" on pressure gauge no. 5north east region water authority, nerwa, wodonga sewerage authority, north east water, n.e. water, wodonga waterworks trust, pressure gauges, water pump pressure gauges

Letter 2 page with attachments, 1 February 1984 ,Southern Cross Machinery Ltd.,to Bendigo Mining, re pumping equipment for Central Deborah Mine. The 'offer for the supply and delivery of pumping equipment' is detailed in the letter. The Southern Cross submersible pump is costed at $7785.00, and the electrical control cubicvle at $1510, PVC insulated cable at $4.40 m. A brochure for the pump and the pump characteristic curves are appended.bendigo, gold mining, central deborah gold mine, bendigo, mining, gold mining, dewatering, pumping equipment, southern cross machinery, c. willman, bendigo mining nl.

Large divers air pumpGill Bros Engineering

Thompson and Co. were a large foundry and engineering works in Castlemaine, Victoria.Fifty six page, soft brown covered booklet including methods of dredging and a catalogue of various pumps. Illustrations include: Thompson's Head Office: Natual Head Method; Pontoon Plant method; floating pontoon suction cutter method and pontoon plant method.thompson's foundry, dredging, gold, tin, thompson and co, castlemaine, engineering, foundry, pontoon, pump

The heavy twin tanks formerly contained vaporised kerosene which was used as a fuel to light the lantern. Kerosene became available in the 1860s as the oil industry in the United States developed, and vaporised kerosene soon became the most common system of illumination. The kerosene vapour lamp was perfected by Chance Bros. for burning the light in their renowned lenses. The system involved vaporising kerosene under pressure and mixing it with air and then burning the vapour to heat an incandescent mantle. The lamp had to be watched throughout the night in case a mantle broke, and the tanks needed to be maintained by hand-pumping each hour or so. Kerosene tanks like these were developed in the early twentieth century, and kerosene as a fuel was phased out by electricity, with the last kerosene system in Australia eventually replaced in 1985. The wick lamp in Gabo Island’s light was altered to a vaporised incandescent kerosene mantle burner in 1909. They would have been in use until 1935, when the light was electrified and the original first-order lens was replaced by a fourth-order lens. The Gabo Island tanks, which are presumed to be those used in the lighthouse between 1909 and 1935, are not attached to the optical apparatus and are no longer in the lighthouse. They are also missing the pressure gauges that were formerly attached to the top of each cylinder. Cape Schanck has a pair of unattached tanks, which are not historically associated with the lighthouse. Point Hicks has an iron stand that formerly supported its lighthouse oil tanks. Despite their lack of intactness, the Gabo Island tanks have first level contributory significance for their provenance to the lightstation and historic association with the lantern’s original Chance Brothers first order lens, which was removed in 1935Two large green cylinders standing in a metal frame. There is also a pumping mechanism attached to the stand with a wooden handle.

This medical / hospital equipment was used in the Tawonga District General Hospital which was built in the 1950's specifically for the increase in population due to the Kiewa Hydro Scheme.Clear glass Irrigator with pump on top missing. The pump is squeezed. The irrigator is pointed at one end gradually widening to a cylinder then blown out to a sphere before coming back in to a neck (with a lip) where the pump part would be attached.medical, medical irrigator, hospital

Borrowed for copying.Rushworth's first water pumping station.

Pump shed at construction of Lake Bellfieldlake bellfield

White painted set of BP Pumps on stand.Accessory Pack No 1/Made in England/By Lesneytoys, general

Gas meter/pump - Location and Date UnknownPolaroidorganisation, industry, gas and fuel

For over 45 years, Richard has used Wendy regularly for recreational fishing and occasional sailing out of Queenscliff. He has the original cotton canvas sails that were fitted on the boat when she was built, and which still are in working condition. Richard says that one of his favourite pastimes has been trolling for pike around Swan Island, close by Queenscliff, ensuring that the heritage of this Lacco-built boat fishing boat is preserved. In about 2015, Wendy underwent a rebuild including: a new centre-case, ribs and deck, and a new Yanmar engine. The works were done by Bryon Miller of Peninsula Wooden Boats. Wendy remains berthed, fore and aft, at Number 12 pile in front of Queenscliff Lonsdale Yacht Club. Well known couta boat in QueenscliffeAustralian made Kopsen vortex bilge pump.Kopsen Vortexcouta boats, 'wendy", bilge pump

Hand Vacuum Pump - originally from Physiology

Mary Howlett (1840-1922) began practising as a country midwife in 1866 in the western district of Victoria. She qualified as a 'ladies monthly nurse' in 1887 and continued to practise as a nurse and midwife until 1920. She began her six months training at the Melbourne Lying-In Hospital. She was known by many as 'Auntie', and her career spanned more than 50 years. Mrs Howlett's midwifery box and contents were given to Dr Frank Forster who donated them to the museum collection in 1993. Glass breast pump with cork stopper and wooden bung. Pump shape loosely resembles that of a light bulb, with a bell-shaped nipple shield on one side. breast feeding, midwifery

For pumping air into petrol irons, the maker is probably Coleman. Liquid fuel irons were a great advancement from Sad Irons in the late 1800's and were used before electricity was availableBrass air pump with wooden handle. A brass tube two centimetres diameter and 14 ccentimetres long with a half centimetre diameter. A 14 centimetre long metal rod with a two and a half centimetre diameter and a three and a half centimetre long wooden handle which slides in and out of the tube. Presumably there is a fitting inside the tube on the end of the rod to push air out of the hole on the other end of the tube.K15.3coleman iron, brass air pump

This item advertises and describes a power pumping head and other products made by Alderdice Brassfounders of Warrnambool. Brothers William and Charles Downing came from Melbourne to Warrnambool in 1898 and established the Atlas Brassworks. In 1901, with the involvement of John Alderdice, the Downing brothers began the Alderdice Brassfounders Company situated at 64 Henna Street in Warrnambool, the site of an old cordial factory. This business which produces fittings used in farming, factories, public utilities, Government departments etc., still operates at the same address.This item is of considerable interest as an early example of the the business activities of Alderdice Brassfounders Co., a prominent business in Warrnambool for over 120 years.This is a sheet of paper describing a power pumping head one side and other products of the Alderdice Brassfounders Company on the other. It contains black printing and black and white illustrations on both sides of the paper. Three of the illustrated items have been crossed out.warrnambool industries

Two stage vertical turbine pump attached to a short discharge column and mounted in a frame with a gearbox at the top. The gearbox is cut away to reveal the interior. The pump is of Giles & Gascon design as sold by Kelly & Lewis. The pump and gearbox are set up to display the unit for sales and marketing purposes."K & L GG in relief back and front of gearbox housing.machinery; pump; vertical turbine; metalwork

One of a collection of over 400 photographs in an album commenced in 1960 and presented to the Phillip Island & Westernport Historical Society by the Shire of Phillip IslandPhotograph of the unveiled Rhyll Cairn with pump and well in foreground.local history, photography, rhyll cairn, black & white photograph, john jenner, bryant west

Handle for Pumping Snout for water to come out fromBAPP DOUBLEACTION

Eppalock. Construction. Some of the pipes in the pump room at Eppalock.agfacolorcivil engineering, water supply, eppalock, eppalock. construction. some of the pipes in the pump room at eppalock.