Showing 885 items
matching straight
-
Kiewa Valley Historical Society
Bottle - Chemist, 1940's
Medicines came in bottles sold by the chemist locally or at a large city chemist store on a shopping expedition.The shape and colour the the bottles changed as did the stopper used to seal it. Use of linseed oil and milk of magnesia.Historical: Change of bottles - shape, glass, stopper, embossing and use. Aesthetic: Display showing colour and shape.Clear brown glass bottle used for medicine - possibly linseed oil or milk of magnesia. It has straight sides three quarters of the way up tapering to the neck ending with a lip and a screw top. Rectangular base with embossing. 3 sides and base are slightly indented. The 4th side is flat with an embossed '2' at the bottom in the middle. Side: '2' Base: 'G 374' followed by the common seal 'A' with 'G' and 'M' inside the 'A'chemist, medicines, brown glass bottle, liniseed oil, milk of magnesia -
Warrnambool and District Historical Society Inc.
Household, Jug, Early 20th century
This is a bathroom jug and could have been part of a set for bathroom use. It would have held mainly water, hot or cold. In the days before there were sinks with hot and cold running water in bathrooms, a jug such as this was an essential item and would have been in common use up to the first three decades of the 20th century. Today this item is more likely to be used as a vaseThis jug has no known local provenance and is kept as a memento of a household item in use 100 years ago. This is a large white china jug. The body of the jug is spherical or bulbous shaped, tapering to a smaller neck and a large lip. There is gold trim around the handle, the rim of the top opening, around the base and around the top part of the jug. The handle has a straight edge. The jug is stained inside and there is a small piece of china missing on the base. bathroom accessories, history of warrnambool -
Warrnambool and District Historical Society Inc.
Hacksaw & blade, Early 20th century
This hack saw would have been used to cut metal. The blades were interchangeable according to the requirements of the job. The item could have been used on a farm or in industry. This item is retained as a good example of a tool commonly used in past times.This is a hack saw. It has a metal frame in a D shape with a metal blade on the straight side affixed with screws. The blade is finely serrated. Attached to the metal frame is a wooden handle. This hack saw also has an extra blade attached to the fixed blade with a piece of wire flex. The metal is somewhat rusty and the wooden handle is worn. vintage hand tools -
Flagstaff Hill Maritime Museum and Village
Functional object - Hinge, 1800s to early 1900s
This flat hinge was recovered from an unknown shipwreck in the coastal waters of Victoria in the late 1960s to early 1970s. It is part of the John Chance Collection. The size of the hinge indicates that it was used for a large item such as an entry door, gate or perhaps a ship fitting. The blue-green patina on the metal is caused by a reaction from its exposure to external elements such as the sea water. The hinge is likely to have been in the water for over 100 years, as the more widely known shipwrecks along Victoria’s Shipwreck Coast date from 1837 to 1940. Before the Middle Ages metal was expensive and took a lot of effort to work with As time went on, methods were discovered for working more easily with metals, and ways were found for combining different metals to make alloys that made the metals stronger and more durable. Hinges forged by blacksmiths began to be common in homes. In the Victorian Era steam power was introduced and manufacturing boomed. Hinges could be made by machines quickly and in great number. All sorts of applications were found to take advantage of the features of hinges. They continue to be developed and used in a huge variety of ways. Although the hinge is not linked to a particular shipwreck, it is recognised as being historically significant as an example of hardware either as part of the ship’s fittings or imported for use in Colonial Victoria in the 19th to early 20th century. The hinge is also significant as it was recovered by John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several wrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. Hinge; heavy bronze flat hinge, hand forged. Flat with narrow, arrow shaped end that lares outward to wider straight end. Attached to the wide end is a rectangular, upward curved knuckle. There are five formed holes along the hinge, two are oval shaped and three are round. The hinge has a blue-green patina.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, john chance, hinge, hardware, flat hinge, door fitting, ship’s fitting, 19th century metalwork, forged hinge -
Geoffrey Kaye Museum of Anaesthetic History
Laryngoscope, Shipway, c 1920
Shipway’s metallic medium size laryngoscope with bulbous curved handle. The section connecting the handle to the straight blade has a screw. Lateral orifice to attached light bulb connection which is not present on this item. The surface is very rusty and quite battered, presence of oxidation on its surface and discoloration of the metal. Has an inscription about the manufacturer.Stamped on its handle, MAYER & Co. LONDONshipway laryngoscope, laryngoscope, metal, mayer & co. london -
Melbourne Tram Museum
Document - Photocopy, Keith Stodden, "Carnegie tram terminus 1924 and 2013", Mar. 2013
Photocopy from the Glen Eira Historical Society, March? 2013 Newsletter (page 2) with a photo of the Carnegie tram terminus in 1924 and 2013. Features photo including a straight sill four wheel tramcar advertising a real estate sale and distance to Carnegie Railway station in 1924, and Z 173 in 2013 at the same location.trams, tramways, carnegie, truganini rd, tram 173 -
Whitehorse Historical Society Inc.
Artwork, other - Ink Line Drawing, Margaret Picken, 49 Churinga Ave., Mitcham, 2003
A property illustration by Margret Picken Commissioned by a real estate agency for the purpose of advertising 49 Churinga Ave., Mitcham. This property has be listed as having sold for $316,000 in 2003. Made by using Rotring ‘Rapidigraph’ drafting pens with Rotring ink on Rapidigraph polyester drafting film, double matte. Trained as a cartographic draftsman within the mining industry, Margaret Picken is an artist who worked producing property illustrations for real estate agencies in eastern suburbs of Victoria from 1983-2005. Retiring from the industry as technological changes favored coloured photography over illustrations, and commissioning companies over sole contractors.This artwork is of Historical Significance as a record of local domestic architecture.A black ink line drawing on drafters film by Margaret Picken, of 49 Churinga Ave., Mitcham depicting a black line drawing of a weatherboard house with tile roof. There is a driveway on the right, leading past a gate to a unconnected garage, and a front garden on the left. Framed by a straight black line edge on each of the four sides of the artwork.49 Churinga Ave., Mitcham Picken © 2003 Realtorwhitehorse historical society, schwerkolt cottage, housing, architecture, margaret picken, house, garden, real estate, mitcham -
Bendigo Historical Society Inc.
Clothing - FAVALORO COLLECTION: WOMAN'S SATIN PANTIES, 1950's
Clothing. Light blue satin woman's panties with straight legs - no gussett. Legs trimmed with 3cm coffee coloured lace. One cm turn over hem at waist with 15 cm opening with placket on LHS. Shaping darts on either side of centre front. Two darts on either side of centre back. No fastenings.costume, female underwear, woman's light blue satin panties -
Ringwood and District Historical Society
Photograph, Ringwood Rifle Club. Rebuilding viaduct Jumping Creek Reserve after bushfires,1962
Typed on back of photograph, "Ringwood Rifle Club. Rebuilding viaduct Jumping Creek Reserve after bushfires 1962. Brian Pump, not knowing the sleepers had been burned away went to drive across and his truck went straight down. Club captain A. Williams wearing felt hat and smoking cigarette." -
Federation University Historical Collection
Document - Document - Letter, Ballarat Junior Technical School: Report from The Overseas Telecommunications Commission (Australia), 1958
The Overseas Telecommunications Commission (Australia) sent a progress report of Edwin Reginald Willingham to Mr Garner of Ballarat Junior Technical School. It outlines the training history from the time he joined the Commission, 9-1-1956 to the present day. He is to commence six months probation as Acting Telegraphist on 19-5-1958. He came straight from BJTS and has made steady progress. Cream page, typed. Letterhead written in blue ink Signature C W Carthewballarat junior technical school, head master, l garner, overseas telecommunications commission (australia), edwin reginald willingham, dux at ballarat junior technical school, c w carthew, acting telegrphist, training history -
Forests Commission Retired Personnel Association (FCRPA)
Adze - small
An Adze is versatile cutting tool similar to an axe but with the sharp cutting edge perpendicular to the handle rather than parallel. The wooden handle is straight and the blade has a slight curve. They are used for smoothing or carving wood such as sleepers An adz, with its long handle, cuts with the grain, and the nature of the chips is different from an axe. While they have a similar shape, they should never be confused with a hoe or mattock used for agriculture and horticulture. Adze - smalltimber tools -
Flagstaff Hill Maritime Museum and Village
Furniture - Table, Ralph Speirs, Warrnambool Triton Woodwork Club, 2009
The turpentine timber used to construct this table was originally used to build the second Hopkins River bridge in 1895. That long timber truss road bridge was built across the river close to the river mouth. The first Hopkins River bridge was built in 1862. That bridge was replaced by the second bridge, built in 1895. In 2001 the new third bridge was built to replace the 1895 bridge, in a design to look similar to the 1895 bridge. The timber from the second bridge was recycled to make this hall table, a cheeseboard presented to the Mayor at that time, and other mementos. The plaque attached to the table states the table was made in 2009 by Ralph Speirs, Warrnambool Triton Woodwork Club. The table is significant for its connection with the second Hopkins River bridge, built in 1895. The timber used to make the table has been recycled from the second Hopkins River bridge that was destroyed to make way for the new, third bridge. The Timber Truss Hopkins River Bridge was classified with State Significance on 16th April 1996, being the oldest of six surviving timber truss bridges in Victoria and the most intact timber road bridge of any type for its size and age. Its design was unique within Australia. It was the largest timber bridge built in Victoria during the 1890s. The bridge was of importance to the economical development of the region, opening up access to allow ease of trade and social connections between the eastern region of southwest Victoria and the town, later city, of Warrnambool and regions further west.Table made from turpentine timber. The timber was recycled from the second Hopkins River Bridge after the bridge was destroyed. The bridge was built in 1895. The table was constructed in 2009 by Ralph Speirs, Warrnambool Triton Woodwork Club. The front corners of the table are rounded and bthe back corners are straight. A plaque with eight rows of text is attached to the table."TABLE BUILT FROM TURPENTINE TIMBER RECYCLED FROM THE SECOND HOPKINS RIVER BRIDGE, BUILT IN 1895 AND DEMOLISHED IN 2000 TO BE RPLACED BY THE PRESENT THIRD BRIDGE. CONSTRUCTION BY RALPH SPEIRS, MEMBER OF WARRNAMBOOL TRITON WOODWORK CLUB, IN 2009"flagstaff hill, warrnambool, hopkins river, bridge, 1895, 2009, ralph speirs, warrnambool triton club, domestic furniture, table, hall table, side table, timber table, hall stand, furniture -
Kiewa Valley Historical Society
Button Hook - Folding - Clothing
Folding button hook would have been used for bringing buttons through button holes for clothing such as gloves in Victorian times. this item dates from early 1900s to 1930s.Used by resident of the Kiewa Valley.Silver metal oval surrounding a straight silver metal prong which has a hook at one end and, at the other end, is attached to the oval shape which comes in and extends as a short handle. The hook is hinged on to the oval shape enabling the hook to be pushed out creating a long tool for hooking buttons. May be used on clothing including gloves. button hook, shoes, gloves, boots, clothig, victorian, folding button hook -
Kiewa Valley Historical Society
Bottle - Soft Drink
Soft drink came in bottles owned by the manufacturer for re use and bought at the local grocery store or at a large city store on a shopping expedition. The shape of the bottles changed as did the stopper used to seal it.Historical: Change of bottles - shape, glass, stopper, embossing, use Aesthetic: Display showing embossing and shape.Clear glass lemonade bottle with straight sides four fifths of the way up then tapering sharply in to form a neck and then the opening. At top of sides there is large embossed writing around the circumference. There are 3 rows of embossed writing towards the base on one side and some on the base. A bakelite stopper is screwed in. This has a rectangular shape to assist a grip for turning.W. Woodroofe Ltd. Norwood S.A. at the top. This bottle is not sold / It remains the Property / Of W. Woodroofe Ltd. and opposite this an embossed pattern that looks like an ice-cream followed by the word Mark On the base: '2418'soft drink bottle -
Kiewa Valley Historical Society
Bottle - Beer, 1944
Beer came in bottles sold at licensed premises either locally or in larger cities visited during shopping expeditions. The shape of bottles were recycled remaining the property of the manufacturer who paid for their return.History of the company - Pick Ax, AdelaideHistorical: Change of bottles - shape, glass, embossing. Collected by bottle collectors. Aesthetic: Display showing embossing & shape especially if in good condition.Clear brown glass bottle used for Beer. Long straight sides before sharp taper to neck which has a slight bulb shape. Glass joined longitudinally on 2 opposite sides. Cork is stuck inside the bottle. Along the bottom of the sides there are 3 rows of heavily embossed print (capital letters), beginning with a circle. Embossed on base: 634. At bottom: circle (can't read). 3 lines: This is the Property of / ....Bottle Co-Operative / Company Limited South Walk.bottle, brown glass, beer, adelaide brewery, pick ax brewery -
Kiewa Valley Historical Society
Bottle - Sauce, Late 1920's - Early 1930's
Sauce and coffee / chicory was stored in bottles bought at the local grocery store or at a large city store on a shopping expedition. The shape of the bottles changed as did the stopper used to seal it.Historical: Change of bottles - shape, glass, stopper, embossing and use. Aesthetic: Display showing embossing and shape.Clear slightly green glass bottle used for storing sauce, coffee or chicory. The base is square with a slight indent inwards and has embossing. The straight sides go two thirds of the way, taper quickly to the neck and then form a lip and opening for a cork stopper. Glass badly blown with a defect about one quarter of the way up.Base: Common seal: 'A' with 'G' at top and 'M' below inside the 'A'. 'M711' across the middle and 'M' underneath. 'F18' on edge of one side.glass bottle, sauce, coffee, chicory -
Kiewa Valley Historical Society
Bottle - Chemist, 1940's
Chemists sold bottles of 'Dexsal'. This bottle was bought locally or at a larger store on a shopping expedition. This bottle is dated earlier than others and had a cork stopper. History of Dexsal.Historical: Change of bottles - shape, glass, stopper, use and embossing Aesthetic: Display showing embossing and shape.Clear brown glass 'Dexsal' bottle with straight sides a little more than three quarters of the way up. The base has 2 long sides (front and back) with 3 equal length sides at each end. The shoulder of the bottle has a short neck on top and then a cork stopper opening. Heavy embossing on the front and embossing on the base.Front: across bottle: 'Dexsal / Reg. Trade Mark' Base: 'F 397' and near the edge '627'chemist, dexsal, cork stopper, brown glass bottle -
Ringwood and District Historical Society
Photograph, View from Canterbury Road/Balfour Avenue area overlooking Martell's orchard, Heathmont, 1929
Black and white photograph of orchard. House in middle range, mountains in background. Photograph appears to be reproduced from subdivisional brochure. Note inserted in sleeve reads, "It has been pointed out that the mountains are to the east and the view is looking south. This therefore is not a 'straight' photograph. House still exists in Eden Avenue at October, 1996".(3 copies).Typed below photograph, "Panoramic view taken on the estate". "View overlooking Martell's orchard, Heathmont, 1929". Taken from corner Canterbury Rd. and Balfour Ave. looking south. Dandenong Creek just beyond house. Washusen Rd. on right". Written on back of one of the copies, "Heathmont Station Estate 1922". "Station Street, Lisgoold St. Canterbury Rd. Vivienne Cres. Balfour Ave." -
Fire Services Museum of Victoria
Fire Engine - Pump - Melba, MFB Pierce-Arrow Heavy Pumper, 1911 (exact)
Unique vehicle fabricated by MFB from chassis of Dame Nellie Melba's salon carUnique vehicle, critical for large fire extinguishing, fully restoredPierce-Arrow MFB Heavy Pumper salon car manufactured 1911 Petrol Engine - Straight 6, 48HP, Kelly & Lewis pump, centrifugal, 400 gpm, 5 inputs, 2 outlets, rear mounted PTO driven Converted by MFB from Salon Car into heavy pumper in 1919 Out of service with MFB in 1933Registration No 16658, 1911 Melba Pump, Pierce-Arrow,melbourne, red, melba, heavy pumper, mfb, pierce arrow, vehicle, dame nellie melba, fire engine, solid tyre -
Victoria Police Museum
Photograph (Victoria Police), Police Officers riding horses, 1920s
Black and white photograph mounted on grey frame. 16 Police Officers mounted on Horses. They are all in the middle of a grass field standing straight and firmly looking into the horizon. A nice formation of aligned horses/4 white, 9 dark in the middle and 3 more white compose the photograph in a fine Horse numbers: 230, 228, 229Handwritten: Acquisition No 241 victoria police museum, police officers, police academy, police force, mounted force, police horse -
Warrnambool and District Historical Society Inc.
Tool - Carpenter's hand saw, H. Disston & Sons, Late 19th century
This saw was made by H. Disston and Sons, a Philadelphia, U.S.A. company founded in 1850 by Henry Disston. It became the largest saw maker in the world in the 20th century. This saw could have been used for industrial or for household purposes. The hand saw used today features the same basic pattern as this one. This saw has no known local provenance but is retained as an example of a hand saw that is over 100 years old. This saw has a triangular-shaped metal blade with a serrated edge on the straight side. The blade has details of the manufacturer imprinted into the metal but this is mostly indecipherable. The wooden handle has four wooden screws and a fern pattern etched into one side. It also has a metal plaque with the name and emblem of the maker. The saw has some staining.‘H. Disston & Sons Philada’household tools, history of warrnambool, wood saw -
Warrnambool and District Historical Society Inc.
Wood Plane Tool, Late 19th century
This tool is one of several in a collection that is believed to have belonged to the Warrnambool carpenter and businessman, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some years in Port Fairy and in 1865 Henry formed a partnership with Christopher Beattie to establish the Warrnambool undertaking business of Beattie and Phillips. This business continued on after the deaths of the founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics Institute.This item is retained as an example of a vintage tool and as a memento of the Warrnambool carpenter and businessman, Henry Phillips.This is a large wood plane tool. It is rectangular in shape and has a centre piece gouged out and a metal blade protected by a wooden piece inserted into the top hole and protruding at the base of the body to form a planing tool. The metal blade has a straight edge. A wooden handle at the end of the tool body has been broken off but is retained with the tool. vintage tools, henry phillips, warrnambool, history of warrnambool -
Warrnambool and District Historical Society Inc.
Small Chisel, Late 19th century
This chisel is one of several tools that are believed to have belonged to the Warrnambool carpenter and businessman, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some years in Port Fairy. In 1865 Henry formed a partnership with Christopher Beattie to establish the Warrnambool undertaking business of Beattie and Phillips. This business continued on after the deaths of the founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics Institute. This tool has a wooden handle indented in the middle to give a firmer grasp and a metal blade inserted at the end of the handle to form a chiselling straight edge. The metal blade is held at the handle end by a band of metal. The wood in the handle has been gouged out and broken at the top end on both sides. Traces of paint are on the handle and the blade is rusted.vintage tools, henry phillips, warrnambool, history of warrnambool -
Warrnambool and District Historical Society Inc.
Label, Gaspars Modern Print, Hillier’s Western Hotel, Early 20th century
These labels come from the Western Hotel in Warrnambool . The Western Hotel at the corner of Timor and Kepler Streets in Warrnambool was opened in 1870 and was a prominent hotel in the area until it closed in recent years. Thomas Hillier was the licensee from 1901 to 1906. These labels are of interest as mementoes of a former prominent hotel in Warrnambool – the Western Hotel..1 A cream-coloured card with cream printing on a red background and space for an address. .2 A label from a whisky bottle with gilt edging, gold-coloured lettering and a whisky logo. The paper has a straight-edged base and an oval-shaped top. .3 A small sheet of white paper with gold-coloured edging and printing and a whisky logo. .1 Hillier’s Western Hotel Warrnambool .2 Fine Old Scotch Whisky bottled by T.G.L. Hillier Western Hotel Warrnambool .3 Finest Scotch Whisky bottled by T.G.L. Hillier The “Western” Blend western hotel,, thomas hillier, history of warrnambool -
National Wool Museum
Postcard, 1910
Postcard was given to David Phillips (Donor) by a friend who was involved in the wool industry through employment at CSRIO.Postcard with black and white image on front. Image is of two men standing in front of a carding machine inside of the Warrnambool Woollen Mill. Image is printed onto postcard despite the non-straight lines suggesting the image may have been cut and pasted. Reverse of the postcard has handwritten message detailing image on the front of the postcard.Handwriting, black ink: Warrnambool Woollen Mill 1910 / First carding Machine bins / Erected b W. (Bill) + (?) / Pontefract warrnambool woollen mill, carding machine -
Lilydale RSL Sub Branch
Coin, 2002
$5 uncirculated coin - bi-metallic - Commemorating the Battle of the Sunda Straight 28 February - 1 March 1942 where both USS Houston and HMAS Perth were sunk. The bell is from USS Houston and carries the date 1930 the year in which USS Houston was commissioned Sleeve comprises coin in card with cover USS HoustonObverse - Elizabeth II Australia 2002 Reverse - Battle of Sunda Strait 1942 USS Houston HMAS Perth 2002 -
Flagstaff Hill Maritime Museum and Village
Container - Bottle, c. 1840s - 1870s
This broken black glass bottle has been handmade from about the 1840s to 1870s. The bottle, possibly used to store ale or soda or mineral water, was found in the coastal waters of Victoria. It is part of the John Chance Collection. Black glass is one of the oldest bottle colours and dates back to the early 17th century. In the 1840s to late 1870s black glass bottles were mainly used for liquor and ale. All glass is made from silica, which is found in quartz sand. The naturally occurring sand has impurities, such as iron, that determine the colour of the glass. Residual iron leads to green or amber coloured glass, and carbon in the sand makes that glass appear as ‘black’. A strong light behind the glass will show its colour as dark green or dark amber. This handmade bottle appears to have been made in a cylindrical dip mould. The molten glass was blown into the mould to give the body a uniform symmetrical shape and size. After the body was blown, the glassblower removed it from the mould and formed the shoulder and neck by free-blowing the glass. The base was pushed up with a pontil tool that gave it the concave shape. The finish for the mouth was added by hand to form the collar. The mould gives the body a slightly textured surface. There is usually a line around the shoulder where the mould meet the base, and a lump or mark in the centre of the base, called a pontil mark, where the push-up tool was removed. Although this bottle is not linked to a particular shipwreck, it is recognised as a historically significant example of handmade, 1840s to 1870s beverage bottles imported for use in Colonial Victoria. The bottle is also significant for its association with John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several shipwrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value.Bottle, black glass, 'gallon' style. Applied lip, straight collar with circular lines from being hand moulded. Shoulder seam, body tapers inwards towards base. Heel has varied width, shallow base has small pontil mark. Mouth is chipped. Glass is discoloured and has uneven surface and encrustations. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, mouth blown, blown bottle, collectable, bottle, dip mould, soda bottle, ale bottle, beverage bottle, black glass -
Port Melbourne Historical & Preservation Society
Plan - Proposed docks and straight cut canal, Port Melbourne, Proposed Harbour Accommodation, 23 Sep 1902
Large plan of proposed docks and straight cut canal, reserve, proposed Harbour Accommodation - Port Melbourne. (Brown with age/or dirt) Shows enormous landfill into Hobson's Bay and around Town and Railway Piers; branch railway lines. Includes dredging plans and two narrow docks at Melbourne - also garden reserve and suburb of Fishermen's Bend.melbourne harbor trust - port of melbourne authority, town planning - proposals shelved, fishermans bend -
Warrnambool and District Historical Society Inc.
Clothing - Woman's kilt, Fletcher Jones and Staff, Warrnambool, 1980s
This is a woman's kilt (skirt, shawl and pin). Two of the objects were made by the Fletcher Jones clothing company. The Tartan is the Australian tartan which was designed by John Reid, a Melbourne architect, when he entered a competition run by the Scottish Australian Heritage Council. He chose the colours of the Outback as the basis of his tartan. The tartan is design registered in Australia (No. 97439). (Source: District Tartans, P. Smith and G Teall, 1992). This outfit was possibly made around 1990. David Fletcher Jones who served in World War One had a itinerant drapery business in the Western District before opening a tailoring business in Warrnambool in 1924.He began to specialise in men's clothing and in 1946 opened a shop in Melbourne. In 1948 he opened a clothing factory in Warrnambool and formed a new company Fletcher Jones and Staff. The company expanded to all states of Australia and included the manufacture of both men's and women's clothing making it one of the best known clothing companies in Australia. The company dissolved in 2011 This is a fine example of a Fletcher Jones clothing product and comes from a firm which was a dominant industry in Warrnambool and known Australia wide. It has further cultural significance being in The Australian Tartan..1 An orange/tan checked woollen kilt with a pleated skirt and straight panel at the front with a side fringe and a metal buckle It has an adjustable waist with buttons and metal clips. .2 A triangular shaped shawl in the same material as .1 .3 A metal pin or brooch in the shape of a sword and a circular piece with a swan image and a motto ENDURE FORT..1 Fletcher Jones AUSTRALIA'S FINEST CLOTHING PURE NEW WOOL .2 FLETCHER JONES AUTRALIA'S FINEST CLOTHING MADE IN AUSTRALIA .3 ENDURE FORT fletcher jones clothing company, warrnambool industries, australian tartan, tartan, australian tartan kilt, fletcher jones kilt -
Circa Vintage Archive
Duval Ensemble, Late 1950s
Dressy day ensemble set - Fitted dress with short sleeves and straight skirt Centre back metal zipper Band of cream guipure lace above the waistline Fitted cropped jacket with shawl collar trimmed in matching lace Three quarter length sleeves to the jacket Pipping trim to most edges Both pieces are fully linedLabelled "Duval of Melbourne Pure Silk"