Tool possibly for setting a saw blade from Illawarrastawell

Small footprint tool with "The Footprint" and "Made in England" on handle.The Footprint, Made in England.tool, footprint

A hand tool used with a bit to drill holes, usually in wood. Pressure is applied to the top and the tool is rotated with a U-shaped grip. This example has two wooden handles.On the metal pipe says "Stanley". On other side is No,144 10in.carpentry, tool

In October 2011 the Ballieu Government announced funding cuts to public and private technical training organisations as a cost saving measure. The government reduced funding for seven subject areas including business and clerical, finance and hospitality, totaling $300 million across the state. During a visit to Ballarat on 15 June 2012 Premier Ted Ballieu was met by hundreds of protestors angry at the TAFE cuts. It was expected that the Ballarat TAFE sector would be cut by $20million (or 40%), and up to 60 TAFE programs would be cut. A report in 'The Australian' on 01 June 2012 projected the TAFE cuts would result in the loss of almost 2000 jobs across the state. 'If the projections are correct, Victorian college redundancies would dwarf those in manufacturing and aviation, matching the worst predictions of job losses across Australia's entire banking sector.' Ballarat's National Tertiary Education Union (NTEU) and the Ballarat Trades and Labor Council (BTLC) are following up their earlier protest campaigns with a monster meeting to be held at Ballarat Trades Hall, Camp Street on Sunday 8 July. The monster meetings will take place in close proximity to Bakery Hill where over 10,000 diggers protested against an the gold license system in 1854. .1) A brown and black Monster Meeting poster based on the Eureka Monster Meeting poster. The post uses text similar to the 1854 Eureka Poster to advertise a meeting to fight TAFE cuts as announced by the Victorian Government led by Premier Ted Ballieu. .2) A white hand flier with red text calling on the people of Ballarat to attend a meeting at Ballarat Trades Hall to fight TAFE cuts. Both items are authorised by Jeremy Smith NTEU UB branch President and Brett Edgington BTLC President.university of ballarat, national tertiary education union, jeremy smith, monster meeting, brett edgington, ballarat trades and labour council, tafe, trades hall, ballarat trades hall, eureka, eureka stockade, union

This measuring ruler was used in the planning and making of components for the ship model Sovereign of the Seas. It is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Jim’s family has donated the ship model “Sovereign of the Seas” and many tools, accessories and documents used in the making of this and other ship models have been donated to Flagstaff Hill Maritime Village. Ship model of HMS Sovereign of the Seas, scale model of 17th Century English war ship, was handmade and carved from plans, enclosed in airtight glass case. All components of that model, including even the smallest pulleys, were hand crafted using tools designed and made by Jim. Outstanding details include functional rigging and moving cannons. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the maker. This ruler is connected with the hobby and skill of ship model making that has been crafted as a leisure activity for many generations. The hobby is often chosen by serving and retired mariners who appreciate the connection with maritime history. This ruler was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage. Ruler; folding wooden ruler, 36 inches long. Two small notches match with tiny pins when folded. This ruler is part of a collection of tools and accessories once used by Jim Williams, maker of a series of ship models 1930-1955 including “HMS Sovereign of the Seas”. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, ship model sovereign of the seas, jim williams, james bernard williams, ship model hobby, ship model tools, ship model making equipment, ship model making accessories, measuring instrument, ruler, folding ruler, sovereign of the sea, ship model, hobby, ship model tool, english war ship

This pointed chisel, made in Melbourne, was used in the making of components for the ship model Sovereign of the Seas. It is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Jim’s family has donated the ship model “Sovereign of the Seas” and many tools, accessories and documents used in the making of this and other ship models have been donated to Flagstaff Hill Maritime Village. Ship model of HMS Sovereign of the Seas, scale model of 17th Century English war ship, was handmade and carved from plans, enclosed in airtight glass case. All components of that model, including even the smallest pulleys, were hand crafted using tools designed and made by Jim. Outstanding details include functional rigging and moving cannons. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the maker. This chisel is connected with the hobby and skill of ship model making that has been crafted as a leisure activity for many generations. The hobby is often chosen by serving and retired mariners who appreciate the connection with maritime history. This chisel was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage. Pointed chisel; dark round wood handle and metal shaft. Made in Melbourne. Chisel blade has an illegible inscription on it. This chisel is part of a collection of tools and accessories once used by Jim Williams, maker of a series of ship models 1930-1955 including “HMS Sovereign of the Seas”.Pressed into the metal "FRANK - - - / MELBOURNE"flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, ship model sovereign of the seas, jim williams, james bernard williams, ship model hobby, ship model tools, ship model making equipment, ship model making accessories, wood working tool, pointed chisel, chisel made in melbourne, sovereign of the sea, ship model, hobby, ship model tool, tool, chisel

This olive green glass bottle has been handmade from about the 1840s to 1870s. The bottle, possibly used to store ale or soda or mineral water, was found in the coastal waters of Victoria. It is part of the John Chance Collection. Glassblowers made bottles like this one by blowing air through a long pipe into the molten glass blob at the end of the pipe. The glass was blown out to fit into the shape of the cylindrical dip mould. Once it hardened, the glass was removed from the mould and the glassblower would continue using the pipe to create the neck while carefully using a tool to hold the base. The base was made using a 'ponty' tool to push it up, giving a concave finish with a central 'ponty' mark. A tool would have been used to cut off the bottle from the blowpipe and a piece of soft glass would be added to the mouth to then shape the band collar. Bottles like this would usually be sealed with a cork, which may have been held in place with wax or wire and tape. Although this bottle is not linked to a particular shipwreck, it is recognised as a historically significant example of handmade, 1840s to 1870s beverage bottles imported for use in Colonial Victoria. The bottle is also significant for its association with John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several shipwrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value.Bottle, olive glass, cork top style. Roughly applied tooled lip with band, smooth body outline tapering intwards towards base. Concave base, small pontil mark, uneven base. Glass has rippled, circular blow lines. Sedimint inside bottle.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, mouth blown, blown bottle, collectable, dip mould, soda bottle, beverage bottle, olive green glass

This tool is one of a collection of tools which are believed to have belonged to Henry Phillips. English-born carpenter, Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some time in Port Fairy before coming to Warrnambool where Henry formed a partnership with Christopher Beattie and established the undertaking firm of Beattie and Phillips in 1865. This firm continued on after the death of the two founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics’ Institute. This tool is of interest, firstly as an example of a vintage tool and secondly as a memento of the Warrnambool carpenter and businessman, Henry Phillips. This is a hand drill with a composite material handle at one end (for one hand) and a tubular metal piece at the other end for the insertion of a bit or drill. In the middle is a circular turning piece with metal spokes and a metal handle (for the other hand). The circular piece is held together and attached to the main body of the tool with several screws. vintage tools, henry phillips, history of warrnambool

A variety of cards from different unions, political parties and business organisations. Cardboard business cards for superannuation companies, unions, campaigns and political parties, Ballarat Trades Hall and local businesses. Number of cards is estimated to be over two hundred. Name of organisation and contact details are printed on each card.btlc, ballarat trades hall, ballarat regional trades and labour council, unions, businesses - ballarat

One of a pair of separate half-length studio portraits of an unidentified man and a woman photographed using the daguerreotype process. Both portraits are contained within pinchbeck frames, bound in brown-tooled leather cases, with red, cut-velvet binding. Each daguerreotype required an individual negative, presented to the sitter as a positive, and was not reproducible. Due to an exposure time that could extend to many minutes, people were often seated for portraits. Sitters were almost exclusively drawn from the middle to upper classes because of the cost of production of the photograph. It is assumed that the subjects of the two daguerreotypes were unidentified members of Gwen Steele's family. They are the earliest photographs in the pictures collection.Three quarte-length studio portrait of an unidentified man photographed using the daguerreotype process. The portrait is contained within pinchbeck frames, bound in brown-tooled leather cases, with red, cut-velvet binding.daguerreotype, photograph, portrait

Green wooden cylinder wooden shape, school teaching tool. cylinder wooden teaching aid tool powelltown primary school shape

Caulking tool - Spike Iron. 160mm long 14mm wideflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, caulking tool

Complete DPSU Pack. Including entrenching tool and sleeping gearequipment, 2000, army

Nickel plated dental tool with hooked end and striated handle.Clev-Dent 1Bmedicine, dentistry

Pulpwood was often split by hand or with black powder splitting guns into more manageable sizes and cut into 8 foot lengths (or billets). Billets were first stacked endwise to drain the sap and lighten the load before they were loaded by hand onto flat bed trucks for transport to the mills. This long length metal hook was used to pull and manoeuvre the pulpwood billets onto the truck. The advent of excavators in logging operations in the 1970s led to the loading and carting pulpwood in long tree lengths.Long steel tool with handle on one end and hook on the other.

Four Hand Tools and piece of Bees Wax Coventry Familystawell

Blue cloth binding with embossing and gilt tooling. 389 pages.E Wiltshire 1918 (lh inside cover)|F Warren (top rh corner)books, fiction

Wooden handled entrenching tool. Metal spike and shovel head.

Likely from the Emerson Estate at Clear LakeMetal curved blade with wooden handle. Agricultural tool for harvesting

Collection of six Printer’s Tools used at Stawell Times - Gestetnerstawell

Cast iron metalworking tool. "A relic from the Principals' garage."metalworking, principal, tool