Long thick leather strap with two triangular steel fasteners on each end and one steel D-ring.No visible markingsrural industry, agriculture, horse, blinkers, saddle, jessie, leather.

A Light Horse trooper in full battle kit. The average Waler horse carried about sixty kilograms of equipment plus a trooper. light horse, horse, aif, a.i.f, ww1, world war 1

Possibly an officer’s batman (perhaps Stan Mountjoy’s own?) with tent and officers’ boots and other equipment loaded onto a packsaddle. soldier, horse, packsaddle, aif, a.i.f, ww1, world war 1

The 8th Light Horse Regiment AIF was raised at Broadmeadows Victoria in September 1914 under the command of Lieutenant Colonel Alexander White and formed part of the 3rd Light Horse Brigade. The regiment served at Gallipoli where in a courageous but ill-fated charge at the Nek on 7 August 1915 it suffered horrendous casualties including Lieutenant Colonel White. Rebuilt in Egypt under the command of Lieutenant Colonel Leslie Maygar VC the regiment went on the serve throughout the Middle East Campaign. Colonel Maygar died of wounds at Beersheba when the regiment was attacked by enemy aircraft while waiting to follow up the successful charge of the 4th LH Brigade on 30 October 1917. The 8th Light Horse AIF was disbanded in 1919, but soon after re-raised as the 8th (Indi) Light Horse in the Citizen Military Forces, superseding 16th (Indi) Light Horse. It had its headquarters at Benalla with sub-units throughout the Upper Murray and Northeast Victoria. In December 1941, the regiment converted from horse to mechanised, initially as 8th Reconnaissance Battalion then in July 1942 it became 8th Cavalry Regiment and served in Northern Territory. As Japanese threat to the mainland declined the regiment was disbanded and men transferred to a variety of other units. A small number were trained in the use of Flame thrower equipment in preparation for service in the landings at Balikpapan and Tarakan .Black and white photograph of 12 soldiers dressed in khaki drill uniforms and wearing slouch hats and peak caps posed with two flame thrower devices. LHQ Flame Warfare Training Team. Taken at Ravenshoe Atherton Tablelands QLD. Includes Sgt George Wiltshire and seven sgts all with service through 8th Light Horse Regiment, 8 Recce Bn, and finally 8 Cav Regt A.I.F.military, 8 light horse, flame thrower, flame warfare, wwii, world war two

Khaki drill was standard working uniform for tank crewmen of 8/13 Victorian Mounted Rifles. Khaki drill was replaced by black tanksuit in 1959. The 8th/13th Victorian Mounted Rifles was raised as a regiment of the Royal Australian Armoured Corps on 1 May 1948 with Headquarters in Melbourne and squadrons in Sale, Benalla/Wangaratta and Albury. In 1955 Regimental Headquarters moved to Wangaratta and a second squadron was located at Albury. The Sale squadron transferred to 4th/19th Prince of Wales’s Light Horse. In 1977 8/13 VMR Regiment was reduced to an independent squadron A Squadron 8th/13th Victorian Mounted Rifles and in 1991 was linked with 4th/19th Prince of Wales’s Light Horse forming the VMR Squadron of that regiment.Mannequin dressed in khaki drill jacket and trousers with basic web equipment and pistol pouch, black beret with silver rising sun badge. uniform, tank, military, vmr, cmf

Vehicles of these types were issued to CMF units following WW11 for transport purposes.Part of a collection of workshop manuals and user handbooks relating to equipment on issue to 8th/13th Victorian Mounted Rifles during the latter half of the twentieth century.Buff coloured soft covered manual 108 pages square bound being Driver's Handbook for a variety of Chevrolet wheeled vehicles ranging from 15cwt 4x2 to Fd Arty Tractor. Published by Australian Army 1945.Ink stamp on title page " 8/13 VMR Regimental Collection."

Part of a collection of workshop manuals and user handbooks relating to equipment on issue to 8th/13th Victorian Mounted Rifles during the latter half of the twentieth century. Unbound Technical manual 62 pages, without covers, single metal staple in top left corner being User Handbook Truck Wrecker 5 ton GS Medium Recovery F5 with Twin Boom Hoist. Published by Australian Army 16 June 71" 118 " on bottom right corner title page.

Relates to Chevrolet Armoured made in USA during WW11.Technical manuals and User Handbooks were essential equipment for Royal Australian Electrical and Mechanical Engineers (RAEME) tradesmen permanently attached to Armoured Corps regiments as Light Aid Detachments (LAD) or Tech Support Troop (TST) and were responsible for repairs and maintenance of a nature beyond the expertise of AFV crewmen and just short of major rebuilds undertaken by Base Workshop detachments.Research vehicleBuff coloured soft cover manual being Technical Manual Ordnance Maintenance Transmission, Transfer Case, and Steering Systems for Medium Armoured Car T17E1. Published by War Department ( USA ) 7 October 1943.Heavy ink stamp on cover " Archive Copy Location " then follows in pen " 3/A/1". In red ink top right corner " T10 { or} T16"

All field units such as 8/13 VMR had need of methods to store equipment. This document provided a template for storage in tropical conditions.Moderate research valueGreen coloured heavy card covered technical manual, screw bound, adhesive fabric spine being Instructions for the Australian Army Ordnance Services Storage in the Tropics 1966.Ink stamp on title page " 8/13VMR Regimental Collection. "

Shows field dress and webbing equipment worn in 1989. The 8th/13th Victorian Mounted Rifles was raised as a regiment of the Royal Australian Armoured Corps on 1 May 1948 with Headquarters in Melbourne and squadrons in Sale, Benalla/Wangaratta and Albury. In 1955 Regimental Headquarters moved to Wangaratta and a second squadron was located at Albury. The Sale squadron transferred to 4th/19th Prince of Wales’s Light Horse. In 1977 8/13 VMR Regiment was reduced to an independent squadron A Squadron 8th/13th Victorian Mounted Rifles and in 1991 was linked with 4th/19th Prince of Wales’s Light Horse forming the VMR Squadron of that regiment.Black and white photograph of two soldiers of 8/13 Victorian Mounted Rifles cleaning the barrel of a 76mm gun on 76mm M113 Fire Support Vehicle. Corporal Marcos Ludeman at left.

Jeep mounted 106 Recoilless Rifles were the equipment of Anti-tank Troop 8/13 Victorian Mounted Rifles , 1970s.Black and white photograph of 106 mm Recoiless Rifle mounted on Jeep. Photo taken at a recruiting display where members of public were able to inspect weapons closely.

In the early 1990s, many indoor and outdoor improvements were undertaken at the Bulla Primary School which included updated playground equipment. the children in this photograph are using one of the pieces of equipment that was installed in the school ground at that time. A coloured non-digital photograph of three children outdoors in a playground playing on a low hobby horse with another child approaching them. It is a rural setting with gently rolling bare hill in the background. playground equipment, bulla primary school

(1) Photographs of photographs, etc. in A.E. Bennett book, "Prize Essays." (i) Acknowledgement for photographs. (ii) p. 101 Appendix. (iii) Diseases of. (iv) Apples. (v) Pioneer timber cottage man and children. (vi) Farm view. (vii) "School of Mines Maryborough. (viii) Group Staff and Students. (ix) "Railway Station Maryborough." (x) "High Street Maryborough." (xi) Maryborough. (xii) Church, Maryborough. (xiii) Maryborough? (xiv) Students and staff seated on horse-drawn cart. (xv, xvi) Distillery equipment. (2) 2 sets of proofs of all photographs in the book. (3) Negatives. Probably taken by A.P. Winzenried for "Green Grows Our Garden." a.e. bennett, prize essay, diseases, apples, timber cottage, men, children, farm view, school of mines, maryborough, staff, students, railway station, maryborough, church, horse-drawn cart, distillery equipment, a.p. winzenried, green grows our garden

As quoted from Wikipedia, ‘An anvil is a block with a hard surface on which another object is, struck. The block is as massive as it is practical, because the higher the inertia of the anvil, the more efficiently it causes the energy of the striking tool to be transferred to the work piece’. The lightstation’s anvil is a red-painted iron block with a conical beak or horn at one end that was used for hammering curved pieces of metal. It would have stood on a heavy free-standing pedestal, such as a large tree stump, to allow complete access to the item being hammered. Some anvils display the manufacturer’s name in the metal on the side, but this is not the case here, and its age, although unknown appears to be quite old, perhaps c.1900. It appears to have had a lot of use, and although no record of this survives, it is presumed that a forge operated on site for hammering, cutting, shaping and repairing tools such as bolts, nails, hooks, chain segments, pulley blocks, hinges, crow bars, picks, chisels, horseshoes and harness hardware. A hames hook (which forms part of the collar worn by a draught horse) survives at the lightstation as do many other heavy metal tools and pieces of equipment. The anvil is an example of the necessary resourcefulness and self sufficiency practiced by lightkeepers working and living in a remotely located workplace and home, and many of the iron items in the collection may have been repaired or even made on its working surface. As a lightstation manager Chris Richter used the anvil to manufacture pulley blocks for sash windows, repair brass door hinges & sharpen cold chisels, crowbars and picks and other lightkeepers have used this anvil for many fabricating jobs such as manufacturing ducting for the generator room ventilation system."The lightship only came in every three months with supplies and there would have been repairs to do between visits from a blacksmith - who would have had to travel on the ship. Also, the ship was only anchored in the bay long enough to unload supplies and collect and deliver lightkeeping staff – probably not enough time to get much smithy work done – especially if the weather packed it in and the ship had to depart. Lightkeepers in our time had to be self sufficient, resourceful and innovative and I imagine that would have been the case in the past." It has second level contributory significance.Red painted blacksmith's anvil.

Tool used for bleeding horses for testing.Folding metal Veterinary tool, used for bleeding horses for testing.Joseph Roger & Sonsveterinary equipment

Was located in the stables at Mount Buffalo Chalet. It was used to record the names of horses that were ridden by Chalet guests when they were holidaying at the Chalet. 'Admiring the rugged beauty of the Buffalo Plateau and exploring its scenic attractions ...quickly became part of the Mount Buffalo Chalet tourist experience...The Chalet facilitated the experience by hosting guided tours, including trail rides on horseback...the horses remained at the Chalet for decades, and have been remembered with great affection, as demonstrated by the honour roll for Chalet horses and various commemorative plaques.' (Pg 98. Historica) Many of these horses are still remmbered by former guest of the Chalet. Granite and Punka were legendary and plaques in their honor are mounted on the large granite boulders in the stableyards.Listed in Draft Inventory of Significant Collection items. Appendix A.3, Snow sports equipment and other recreational items. (Pg 166 Historica).Wooden plaque with names painted onto strips of leather fixed to a board. The board is made of two sections of wood and is arched at the top and squared at the base. The piece at the top that appears to be earlier and has gold painted inscriptions with decorative scrolling around the edge. The board has leather strapping around the edge and two stirrups threaded onto leather at the base. The upper section of the board has all the names painted onto leather strips. The lower section of the board has some names painted onto strips but also some names are scratched directly onto the wood.At top of plaque, "ROLL OF HONOUR /TO / OUR FRIENDS - / THE CHALET HORSES, / WHO GAVE US MANY HAPPY HOURS / BUT WHO HAVE SINCE MOVED / "DOWN THE HILL". FROM THE / TIME OF "PUNKA" / WHO SERVED / FAITHFULLY FOR 20 YEARS" Underneat this are the names of the individual horses starting with , "PUNKA....."

The collection of thirteen model horse drawn vehicles were carefully handmade by Mr Chas W Davis 1925 - 2002. He was a talented artist and saw doctor. These models are of single horse drawn military gun carriages and accessories.Three gun carriages: 1. A brown four wheeled wooden model of a gun carriage for military use with a white horse. The carriage wheels have black rims with grey painted spokes. There is a brown storage box at the front for the driver with a brown vinyl padded seat.Three wooden slats form the footrest. A gun cleaning rod and lighter rod are attached to the back of the narrow support tray towards the back wheels. The saddled horse is linked to the carriage by a wooden shaft. A gun carriage is a frame and mount that supports the gun barrel of an artillery piece allowing it to be maneuvered and fired. These platforms often had wheels so that the artillery pieces could be moved more easily. 2. A brown large two wheeled gun carriage with no horse. The wheels have grey painted spokes and black rims. There is a cleaning rod and a lighting rod attached to the carriage shaft near the wheels. An additional accessory is included of a black vinyl saddle with lambswool lining as well as clips for attaching to the horse tack. 3. A grey two large wheeled gun carriage with no horse. The wheels have grey painted spokes and black rims. There is a cleaning rod and a lighting rod attached to the carriage shaft near the wheels. There is a chain to attach the carriage to the horse tack.56 VIR (3rd VIR)military vehicles, military models, gun carriages, military equipment

The tin was used by Mr Des BlythA small rectangular, metal tobacco tin with red edging around the yellow, hinged lid. It has the label "LOG CABIN" Flaked Gold leaf Tobacco printed in three scroll shapes. There is an outline of a cabin in the bush, with a horse and man in the foreground. The manufacturer's details are written at the bottom. The tin is worn with age and use, and the lid is loose.On the lid: '"LOG CABIN" Flaked Gold Leaf Tobacco' is printed in three scroll shapes as well as 'Manufactured by W.D. & H.O. Wills )Australia) Ltd, Sydney, Successor in Australia to Lambert and Butler.'tobacco tins, tobacco containers, smoking equipment

A Crown Horse brand Home Needle Kit with 48 needles and a threader in a plastic bag. The needles are presented in gold strips attached to a black piece of cardboard.and are labelled as - Darners, Embroidery, Thick Wool Darner, Sharps, Betweens and a Threader. Two needles are missing, - a Bodkin and Mattress. The card has two black horses underneath a black crown at the top.'Crown Horse Home Needle Kit Japan' The types of needles are as listed above.sewing equipment, sewing, sewing needles

as used on horses to pull a variety of heavy equipment Ca 1900as manufactured and sold by Holden and FrostShaped to fit on horses back with two straps that fit around horses belly Two metal rings for reins two brackets for strapping and a metal buckle on end of belly bandPatent etched on saddle surfacecart / van tree, equine

Used over horse collar Ca1900 to attach to horse cartImported and sold by Holden and FrostSteel painted black hames with bracket hook with kangaroo imprint with leather strap and buckleKangaroo imprint on hookequine, collar, hames

Imported and retailed by HOLDEN and FROST for the use on horse tackle during ca 19/20Sold by Holden and Frost for military, agriculture and civilian use c1910Nickel plated metal cart buckle NILcart, military, agriculture, civilian, buckle

Brandon horse bit used on horse tackle during 19th and 20th centuries and manufactured by Holden and FrostEarly object used during c1900 retailed by Holden and Frost for military agricultural and civilian useTwo nickel plated rings held together with two barsequine, military, agriculture, civilian 1900, horse bit

Used on horse tackle during the 19th and 20th centuries, manufactured and sold by Holden and FrostSold and manufactured by Holden and Frost during the 19th century for military, agriculture and civilian useNickel plated horse bit snaffle, double rings on both ends held together with two bars joined in middle horse bit, equine, ,military, agriculture. c1900

Used on horse and tackle in the 19th and 20th centuries and manufactured and sold by Holden and Frost Manufactured and retailed by Holden and Frost for military, agriculture and civilian use c1900Nickel plated trotting bradoon horse bit, two rings on each end held together with two bars joined in centerequine, agriculture, c1910, horse bit, military

Used on horse and tackle during the 19th and 20th centuries and manufactured and sold by Holden and Frost Sold by Holden and Frost c1910 for military agriculture and civilian use Nickel plated bradoon horse bit, two rings joined together with two nickel bars joined in the middle equine, military, agriculture, civillian ca1910, horse bit

Used on horse tackle during the 19th and 20th centuries and manufactured by Holden and Frost Sold by Holden and Frost c1900 for military, agriculture and civilian useNickel plated snaffle horse bit, two rings connected to two T-bars in middleequine, military, agriculture, civilian c1900, horse bit

Used on horse tackle during the 19th and 20th centuries and manufactured by Holden and Frost Sold by Holden and Frost c1910 for military, agricultural and civilian use Nickel plated horse bit with chainequine, military, agriculture, civilian ca1910, horse bit

Used on horse tackle during the 19th and 20th centuries and manufactured by Holden and Frost Sold by Holden and Frost during the 19th and 20th centuries for military , agricultural and civilian use Silver plated breaking horse bitequine, military, agriculture, civillian ca1910, horse bit

Used on horse tackle during the 19th and 20th centuries and manufactured by Holden and Frost Sold by Holden and Frost during c1900 for military agricultural and civilian use black painted metal horse bitNilequine, military, agriculture, civilian c1900, horse bit