A cap liner is an item that helps to seal the contents in a container to avoid leakage and spoiling. This cap liner was recovered from the Falls of Halladale shipwreck. The Falls of Halladale was an iron-hulled, four-masted barque, used as a bulk carrier of general cargo. She left New York in August 1908 bound for Melbourne and Sydney. In her hold was general cargo consisting of roofing tiles, barbed wire, stoves, oil, and benzene as well as many other manufactured items. After three months at sea and close to her destination, a navigational error caused the Falls of Halladale to be wrecked on a reef off the Peterborough headland on the 15th of November, 1908. The captain and 29 crew members survived, but her cargo was largely lost, despite two salvage attempts in 1908-09 and 1910. The Court of Marine Inquiry in Melbourne ruled that the foundering of the ship was entirely due to Captain David Wood Thomson's navigational error, not too technical failure of the Clyde-built ship. The Falls of Halladale was built in1886 by Russell & Co., at Greenock shipyards on the River Clyde, Scotland for Wright, Breakenridge & Co of Glasgow. She was one of several designs of the Falls Line of ships named after waterfalls in Scotland. The company had been founded between 1870- 1873 as a partnership between Joseph Russell, Anderson Rodger, and William Todd Lithgow. During the period 1882-92 Russell & Co. standardised designs, which sped up their building process so much that they were able to build 271 ships during that time. The Falls of Halladale had a sturdy construction built to carry maximum cargo and was able to maintain full sail in heavy gales, one of the last of the 'windjammers' that sailed the Trade Route. She and her sister ship, the Falls of Garry, were the first ships in the world to include fore and aft lifting bridges. Previous to this, heavily loaded vessels could have heavy seas break along the full length of the deck, causing serious injury or even death to those on deck. The new raised catwalk-type decking allowed the crew to move above the deck in stormy conditions. The Falls of Halladale shipwreck is listed on the Victorian Heritage Register (No. S255). She was one of the last ships to sail the Trade Routes. She is one of the first vessels to have fore and aft lifting bridges. She is an example of the remains of an International Cargo Ship and also represents aspects of Victoria’s shipping industry. The wreck is protected as a Historic Shipwreck under the Commonwealth Historic Shipwrecks Act (1976).Glass cap liner, moulded disc with indented ring and finger grip on the top. Recovered from Falls of Halladale wreck. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, falls of halladale, cap liner, russell & co., glass liner, glass seal

Gem pan, iron mould with 12 half spherical cups in set of 3 x 4. Overall rectangular shape. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

The changes in the metal observable on the interior of both these lead nipple shields suggests that this pair was well used. One can only imagine the long-term effects. Perhaps significantly, the lid of the box is stained with the distinctive purple of gentian violet. The underside of the lid claims “They are in no way likely to be injurious to the infant”. Allen & Hanbury’s catalogue of c1901 lists these as costing 1/- per pair.Two nipple shields, lead, moulded, 6cm diameter, with "England" impressed on inside. In original manufacturer's circular cardboard box.breast feeding

Yellow plastic merino sheep sign- used to advertise Golden Fleece petrol pumps.One half of a yellow plastic moulded sign in the form of a merino sheep- used to advertise Golden Fleece petrol pumps.merino sheep, golden fleece petroleum company, sign, golden fleece, petroliana

This small green bottle has been handmade by a glassblower and is the typical shape of a carbonated soda or mineral water bottle. It was made from 1840s-1870s. The bottle was found in the coastal waters of Victoria about 100 years from when it was made. It is part of the John Chance Collection. Glassblowers made bottles like this one by blowing air through a long pipe and into molten glass at the end of it. The shape of the glass would be blown out to fit into the shape of the cylindrical dip mould. Once it set, the glass was removed from the mould and the glassblower would continue using the pipe to create the neck and another ponty tool to push up and form the base. The bottle would be cracked off the end of the glassblower’s pipe and a blob of molten glass would be wrapped around the top of the neck and shaped to finish the lip of the bottle. The seal was usually a cork, held in place with a ball-wire fitting attached between the upper and lower parts of the neck finish. This style of handmade bottles usually had thick glass so that it could be heat-sterilised, then re-filled. The bottles would often have horizontal bubbles in the applied finish, caused by twisting the glass, and vertical bubbles and diagonal lines in the body from it being blown, and a pontil mark in the base where the ponty tool had been attached. Although the bottle is not linked to a particular shipwreck, it is recognised as being historically significant as an example of bottles imported for use in Colonial Victoria in the mid-to-late 1800s. The bottle is also significant as it was recovered by John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several wrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. Bottle; green glass, soda or mineral water style, handmade. Applied finish, blob double ring collar; upper is wide and rounded, lower is a narrow ring. Diagonal lines in glass on neck and shoulder. Low shoulder mould seam. Body is matt with ripples in glass, tapers inward towards base. Shoulder and neck are shiny. Push-up base with pontil mark, visible through glass. Marks on heel. Uneven base. Bubble on side and top of lip. Sediment on inside surfaces. Two score lines, one half way down body, one near base. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, dip mould, mouth blown, pontil mark, 19th century bottle, collectable, soda bottle, mineral water bottle, green glass, blob finish, push-up base

These will have the steel plate moulded into the rubber soles.These are rubber soled leather uppers boots. They have black boot laces fitted, there are 12 eyelets on either flap. The soles have rubber grips with the word 'Seal' raised as part of the boot tread. They have a full length leather tongue which is attached to both L & R flaps.footwear, vietnam war

This distress EPIRB unit (Emergency Position Indication Radio Beacon) was found on the beach at Levy's Point, Warrnambool, in December 2000 by a Warrnambool resident. Local police were alerted at the time. This distress signal unit is a world-wide COSPAS/SARSAT, satellite assisted, SAR (Search and Rescue) system for location of distress transmissions emitted by an EPIRB. Offshore cruising vessels must have such a unit as part of its essential safety equipment. This model EPIRB relies on four satellites with orbit times of approximately 100 minutes. The earlier units relied solely on aircraft flying overhead to detect and forward on the EPIRB’s location to Search And Rescue authorities, whereas this new system utilises satellites. The Lokata Company was established in 1970, designing and manufacturing marine products including communications. The company no longer makes products with the “Lokata” brand. In 2001 Sartech Engineering Ltd. took over the support for the Lokata EPIRB beacons. EPIRB unit; “Emergency Position Indication Radio Beacon” Distress communication unit for sending a distress location transmission in an emergency at sea. The EPIRB is a yellow, rectangular box with dials, buttons, indicator lights and instruction, plus an antenna protruding from the top of the unit. This unit sends a 406P (X) EPIRB, with 406M-Hz frequency, 48 hour duration signal. Made by LOKATA Ltd in England. Remnants of a white label remain on the side. Circa 1970“LO-KATA” moulded into the body. “Model 406” printed on the identifying pane (other required information is undecipherable) flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, emergency position indicating radio beacon, epirb, lokata ltd, marine safety equipment, satellite transmitting beacon

Picrotoxin is a bitter crystalline compound derived from the seed of an East Indian woody vine (Anamirta cocculus). It is a central nervous system and respiratory stimulant formerly used in barbiturate and other anaesthetic poisonings. Hexagon shaped amber glass bottle with red rubber stopper. There is an ivory coloured manufacturer's label with black printed text adhered to the front of the bottle, along with some handwritten notations. The bottle has powdery contents.Handwritten on manufacturer's label: PURE FIRST USED 8/10/64 •Moulded into base of bottle: T195respitaroty stimulalnt, t and h smith, barbiturate poisoning, edinburgh, blandfield chemical works

Although these scales cannot be identified against a historical period of Australian development they are therefore placed in a time frame when commercial markings from manufacurers were not important enough to have domestic kitchen items labeled. These cast iron scales were made for domestic and possibly rural areas and not for cities where demand for known branded utensils was more an issue. These scales are very "basic" and not to the level of weighing detail that commercial scales had to be at. These scales do not show any visible markers for accurate measurement. The "near enough is good enough" principle can be related to these scales.These scales are significant as they identify one of the basic preparation items for the weighing of foodstuff before the televising of "cooking" shows (1960s onward). The meals for which quantity measurements are required for domestic cooking is not exact however the use of cup measurements for large dishes is tedious and these scales offer the capacity for a larger mixture and an easier method for the "cook". As the need for accurate measurements of ingrediants for rural domestic meals has in the past been not been critical the requirement of accuracy that these scales do not provide is of no consequence. Domestic kitchens in the Kiewa Valley and the type of meals produced would not have required the accuracy of ingrediants that "modern " international cuisines of the later 1900's require. These kitchen scale were used whenrecipes had the terms "pinch, dollop, squidge and smidgen" were about as accurate as most recipes needed to be.Black cast iron, medium weighing scales, with a two arm cradle. On one side of the cradle is a two half circle holding frame for the retention of the metal container scoop. This light weight steel scoop/dish allows for the weighing of loose grain or similar type material to be contained and held in place for establish its saleable contents. On the other side of the weighing cradle is a flat circular platform to hold various metal disc. All the disks used on this platform have their weight stamped on them. When the produced filled in the scoop balances with the metal weight on the opposite end of the balance match (visual horizontal appraisal) the appropriate quantity required is obtained. This scale does not have any visual markings on the arms to identify a true balance. It is therefore reasonable to assume that these scales were for domestic use only and not for commercial transactions. There are two weights that are useable with these scales, one is stamped "1 lB"(pound) and one stamped "1" and both are made as a solid round piece of cast metal.The smaller disc has a "1 lb" moulded and pressed form within a marked inner circle and a mouled ridge outer circle enclosure. The other weight is slightly larger and has a moulded "1" located on the top within a raised circular edge.domestic kitchen scales, weighing scales, metal scales

This small handmade bottle possibly dates from the mid-1840s. It may have been used as a traveller's ink bottle, due to its wide mouth. It was recovered from the wreck of the Inverlochy and is part of the John Chance collection. Small glass ink bottles similar to this one were handmade, blown into a cup shaped mould, and sharply broken off from the blow-pipe at the neck and sealed with a cork or wax. The mouth of this bottle appears to have been added after it was blown. INVERLOCHY 1895-1902 - The Inverlochy was a steel sailing barque built in Scotland in 1895 for international trade. In 1902 the Inverlochy left Liverpool under the command of Captain E.R. Kendrick. There were 21 officers and crew and the captain’s wife Mrs Kendrick, on board, bound for Australia with cargo that included tools, chemicals, liquor (beer, whisky, stout, rum, and brandy), steel, iron, wire netting, hoop iron, tinplate and pig iron), and steel wire for the Melbourne Tramway Company, tiles, soap, soft goods and earthenware. On December 18 almost at their destination, the Inverlochy ran aground on Ingoldsby Reef at Point Addis, near Anglesea. The crew and passengers left the ship via lifeboat and landed at Thompson’s Creek, then walked about 20 kilometres to Barwon Heads. Salvagers were interested in the 10 miles of cable in the hold. Mrs Kendrick’s ‘high grade’ bicycle was amongst the items salvaged but she lost her jewellery and two pianos. By February 1903 the ship had broken up and objects such as bottles and casks of liquor were washed ashore. Bad weather shook the wreck in June 1903, causing the ship’s spars and figurehead to be washed ashore. This handmade bottle is historically significant for its association with being made and used during the mid-to-late 19th century. This handmade glass bottle is significant for its connection with the John Chance Collection, which is historically significant as an example of artefacts from wrecks that had been lost in the coastal waters of Victoria from thirty to over one hundred years before John Chance and others discovered them. These artefacts are a sample of goods carried as cargo or personal possessions, and of ship hardware of that era. The bottle is significant through its connection with the barque, Inverlochy, The Inverlochy is significant for its cargo, which is a snapshot of the array of goods imported into Australia at the turn of the 19th century, including cable for the Melbourne Tramway Company. The Inverlochy is historically significant and is registered on the Victorian Heritage Database, VHR S338. The wreck of the Inverlochy is important as an accessible dive site that shows the remains of a large international trading vessel and its contents. It is valuable for an insight into Victorian era of shipping and maritime history.Bottle, clear glass, handmade, mould-blown. Small pill bottle has round mouth and neck, straight sides, rectangular base, no seams, shiny surface. Thickness of glass varies. Mouth is lop-sided and lip varies in width. Inscription of logo on both wide sides. Inscription embossed on sides [tear drop] logo. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, john chance, inverlochy, scotland, captain e.r. kendrick, melbourne tramway company, tramway cable, ingoldsby reef, point addis, anglesea, thompson’s creek, barwon heads, victorian, antique, handmade, mould blown, small glass bottle, rectangular glass bottle, pill bottle

Displayed in History House.Brass, cut glass (clear) ink containers, black lids. Rectangular black base, moulded glass (black). Brass fittings.

Councilor Charles Thomas Henderson was elected to council in1914 serving until 1941.He served two terms as Shire President,1920-21 and 1929-30.Original Historic Photo.Oval photo of Councilor Charles Thomas Henderson,set in narrow moulded wooden frame,on brown mount,with gold surounding photo. Councilor Charles Thomas Henderson,1920-21,1929-20.ballarat shire council, henderson charles thomas, 1914 41

This type of pessary came in six sizes ranging from 8.0 to 10.5cm.Two pessaries, Hodge design. Made of moulded black vulcanite. Small size. Typed label with catalogue record, "HODGE PESSARY".intrauterine device, pessary

8th Signals Regiment (8 Sig Regt) is an Army Reserve Signal Regiment of the Royal Australian Corps of Signals (RA Sigs) and is a direct command unit of the 2nd Division, Randwick Barracks in Sydney, NSW.Shield-shaped wooden plaque with white rectangular moulded metal attachment, bearing number 8 and a flash shape in green and blue.8 Signal Regiment8 signal regiment, plaque, signal

Small plastic doll with jointed arms, painted face, removeable yellow plastic under garments, moulded hair in French bun.Made in Hong Kongtoys, dolls, plastic

The American Foundation for the Blind developed this new model in their experimental shop in 1932 and contracted with the typewriter manufacturer to produce the machines and continued production until 1947. It's sleek silver look was a change of look from the previously manufactured Hall Braille Writer, and improvements included a carriage return, the ability to add spaces between lines and a back space key. It was found in the Braille and Talking Book Library in South Yarra, Victoria, Australia and was used by either staff or volunteers at Vision Australia Library.Stainless steel braille writer in the shape of a typewriter. The braille writer consists of a heavy moulded machine with 6 black plastic keys.On front of writer: "American Foundation for the Blind Inc. New York." "Manufactured for the Foundation by L.C. Smith & Corona Typewriters, Inc." On back: "Licenced by Underwood Elliot Fisher company/ Serial no. 5-2422.braille equipment, assistive devices

Possibly part of the Uebergang collection. The moulds are placed under pressure during the maturation process with excess moisture being forced out through the holes in the lid. This is one of a set of moulds with a size range 5lb, 10lb, 15lb, 20lb, 40lb, 80lb.Round galvanised steel cheese hoop with strap handles soldered to the sides. The round lid has 6 holes.

Light card cover, mould and mildew staining, discoloration from light exposure. Minor insect damage to top right front cover. Mould staining front four pages. Mildew & fluid stains through out. Some foxing throughout. Blue cloth backstrip on spine, worn at top and bottom. Binding intact. Fair condition.non-fictionA descriptive atlas of the Eucalypts of Australia and the adjoining islandsbotany, eucalypts, australia

The toy soldier is a relic from the shipwreck of the LOCH ARD in 1878. It has a companion piece in the Flagstaff Hill collection. The toy soldier is unpainted, but the style of uniform, and the weapons carried (a musket and a basket-handled cutlass), indicate it is a representation of the Napoleonic Wars period from the beginning of the nineteenth century. Mass-produced toy soldiers made of cast metal (lead or tin) became popular during the 1800s. Heyde of Germany manufactured silhouette-shaped ‘flats’ early in the century; then Mignot of France released three-dimensional ‘solids’; and later (1893) Britain of England made ‘hollow cast’ figures. These innovations were designed to make sets of toy soldiers more affordable for middle and lower-class children, extending the market beyond the intricately made and hand-crafted replicas that were the preserve of the rich in the eighteenth century. Wooden military figures, specially carved and unpainted ones, were therefore not particularly common at the time when the LOCH ARD went down on Victoria’s southwest coast. Mignot was the first to sell unpainted soldiers, leaving their customers to fill in the colours according to their own patriotic preferences. If a similar attitude is assumed for the two virtually identical figures in the Flagstaff Hill collection, it is possible they were part of a new set intended for sale, rather than part of a passenger’s existing collection. A similarly light composite material of sawdust, glue and linseed oil (press-moulded onto a metal frame) was used by the German firm O & M Hausler to create toy soldiers, but this type of modelling was not commercialised until after 1912. The first heat-moulded plastic toy soldiers did not become available until after 1945.The toy soldier represents a 19th century child's interest in military history. The item is one of two toy soldiers recovered from the Loch Ard that are in Flagstaff Hill's collection. The shipwreck of the Loch Ard is of significance for Victoria and is registered on the Victorian Heritage Register ( S 417). Flagstaff Hill has a varied collection of artefacts from Loch Ard and its collection is significant for being one of the largest accumulation of artefacts from this notable Victorian shipwreck of which the subject items are a small part. The collections objects give us a snapshot of how we can interpret the story of this tragic event. The collection is also archaeologically significant as it represents aspects of Victoria's shipping history that allows us to interpret Victoria's social and historical themes of the time. Through is associated with the worst and best-known shipwreck in Victoria's history.An unpainted replica or toy soldier, presented in a Napoleonic Wars era uniform. The moulded figure is in a standing posture and is bearing a musket at the slope-arms position, with a sabre or cutlass slung behind. It wears a plumed helmet, short-fronted coat with longer buttoned tails at the back, button-fastened bib-front trousers, a pair of crossed bandoliers, and tasselled shoulder epaulettes. The figure is a creamy colour with red-brown stains on the head and shoulder. There is a hole in the end of the musket. The model is detailed and sharp. It was recovered from the wreck of the Loch Ard.Cataloguing numbers: “6599” on the rear of the left trouser leg “PWO 2308” on the sole of the left boot, (partially obscuring “R122” written in biro) “2218” on the sole of the right boot.flagstaff hill, warrnambool, loch ard, flagstaff hill maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, loch line, napoleonic uniform, toy soldier, replica soldier

This is a wall decoration intended for a child's room or centre. It shows Humpty Dumpty and a girl nursery rhyme character and is believed to have been on the wall in a children's ward at the Warrnambool Hospital. The painters were A&A Henderson of Ballarat, believed to be Angus and Andrew Henderson who had a sign-writing and house decorating business in Ballarat in the early to mid 20th century. The business operated under the name Henderson Brothers. Angus Henderson was a well known Ballarat signwriter who taught signwriting at the Ballarat Technical Art School in the 1940sThis is a piece of cream canvas material on which are painted two nursery rhyme figures in various colours. There is some evidence of mould on the back of the canvas. A.& A.Henderson Ballarathenderson brothers, signwriters, ballarat

Albert Francis STRAUSS No 1914 enlisted in the 2nd reinforcements 38th Batt on 26.4.1916 age 27 years. Embarked for England 16.8.1916, embark for France 22.11.1916, WIA 28.1.1917 GSW to face, rejoin unit 7.2.1917, hospital 3.4.1917 with Rhuematism, rejoin unit 18.5.1917, hospital 24.7.1917 displaced tendon left hand, rejoin unit 28.8.1917, promoted L/Cpl 13.6.1918; WIA 2nd occasion 11.8.1918 GSW left shoulder and arm, rejoin unit 7.10.1918, RTA 27.5.1919, discharged from the AIF 4.9.1919.Brown moulded wooden frame with olive green mount & glass front. Rectangular enhanced studio portrait of ALBERT FRANCIS STRAUSS in uniform.Short military history of “ALBERT FRANCIS STRAUSS of Bendigo”photography framing, strauss

David Ronaldson was a student of Civil Engineering at Ballarat Institute of Advanced Education when he completed this drawing. Pencil on paper student's technical drawing .1) Engineering drawing 'Shoe and pile details' .2) Engineering drawing 'Concrete pile and mould' ballarat school of mines, technical drawing, david ronaldson, ballarat institute of advanced education, alumni