A home sewing needle kit. These paper sleeved novelty needle books were available in the late 19th Century. They were often free as a promotional give-away. In the 1900's they were colourful and fun.A vintage Novelty Needle Book made in Japan with 50 needles mounted inside a pop up card. The needles are presented in gold and red strips attached to a coloured card depicting two small children playing on a see-saw with their teddy bear in a garden. Five needles are missing. The back of the card is yellow and shows a girl holding a red rose.'Novelty Needle Book 50 Needles' is printed on the front of the card which shows two children playing on a see-saw with their teddy bear. 'Made in Japan' is printed at the bottom right on the front of the card.sewing equipment, sewing, sewing needles

Caulking is the use of cork or other substances to seal the seams and joints of the vessel to make them watertight. Caulking lasts for quite some time but eventually dries out and needs to be replaced. A mallet or hammer is often used with a caulking iron to drive it along the seams. The caulking iron’s blade is tapered to be narrower at the tip to make it easier to remove it from the joint. The shipwright’s tools on display in the Great Circle Gallery are connected to the maritime history of Victoria through their past owner, user and donor, Laurie Dilks. Laurie began his career as a shipwright in the mid-1900s, following in the wake of the skilled carpenters who have over many centuries used their craft to build and maintain marine vessels and their fittings. You can see Laurie’s inscription on the tool called a ‘bevel’. Laurie worked for Ports and Harbours, Melbourne, for over 50 years, beginning in the early 1960s. He and a fellow shipwright inscribed their names on a wheelhouse they built in 1965; the inscription was discovered many decades later during a repair of the plumbing. Many decades later Laurie worked on the Yarra moving barges up and down the river and was fondly given the title ‘Riverboat Man’ His interest in maritime history led him to volunteer with the Maritime Trust of Australia’s project to restore and preserve the historic WWII 1942 Corvette, the minesweeper HMAS Castlemaine, which is a sister ship to the HMAS Warrnambool J202. Laurie Dilks donated two handmade displays of some of his tools in the late 1970s to early-1980s. The varnished timber boards displayed the tools below together with brass plaques. During the upgrade of the Great Circle Gallery Laurie’s tools were transferred to the new display you see there today. He also donated tools to Queenscliffe Maritime Museum and Clunes Museum.The shipwright’s tools on display in the Great Circle Gallery are connected to the maritime history of Victoria through their past owner, user and donor, Laurie Dilks. Laurie began his career as a shipwright at Ports and Harbours in Melbourne in the mid-1900s, following in the wake of the skilled carpenters who have over many centuries used their craft to build and maintain marine vessels and their fittings.Calking iron, a metal tool with a round flat top and head that flares outwards to a wide wedge shape. It once belonged to shipwright Laurie Dinks.flagstaff hill, maritime museum, maritime village, warrnambool, shipwreck coast, great ocean road, shipwright, carpenter, shipbuilding, ship repairs, hand tool, equipment, caulking, ship maintenance, cooper, shipwright’s tools, shipwrights’ tools, tools, maritime trade, caulking iron, laurie dilks, l dilks, port and harbours melbourne

The entrenching tool fits inside item 3005 for attachment to basic webbing. See also Reg No 3005. Item issued to Peter Ball 3796117, refer Cat No 4704Entrenching tool consisting of a wooden handle with a fold open spade & pick. A threaded metal section allows either spade or pick to be locked for use.Peter BALLbasic webbing, military

Unopened industrial sized reel of cotton with labels attached to top, side and bottomManufacturers of High Grade Sewing Thread for all trades including specially prepared 3 and 4 cord for use in boot, shoes, slipper and clothing trades.

John Heath tool boxBox wooden tool box painted dark green with 2 tar rope handles at ends lid has metal hinges, keyhole at front 900mmL x 475mmW x 470mmH. Painted dark greenflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, tool box

Four coloured plans and one copy of the new trades building at the Ballarat School of Mines.ballarat school of mines, architecture, trades, plumbing, percy everett, architectural drawing

Entrenching tool - refer Reg No 3004. Item issued to Peter Ball 3796117, refer Cat No 4704Webbing pouch, green colour, shaped to fit a entrenching tool. Has press stud closing cover, rear is fitted with 2 x steel keepers for fitting to basic webbing.PETER BALL D [up arrow] Dmilitary, webbing, entrenching tool

Used at 41 Orient Ave, Mitcham in the early 1930s.An iron pointed at both ends. A wooden handle with a clip on it so that it could be clipped to the iron heated on the stove. The handle would be removed when the iron was being heated.Also know as 'Mrs. Potts' iron.Gibson Tool Aust 3 50domestic items, irons

Saw metal large on three sided wooden frame. Blade attached to frame by screws & tensioned by metal turnbuckle. A frame saw.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Saw metal large on three sided wooden frame. Blade attached to frame by screws & tensioned by metal turnbuckle. A frame saw.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Permanent Way Department - Care of Plant Instructions to Operator of Power Saw for the maintenance of the saw. Instruction from Permanent Way Engineertrams, tramways, instructions, maintenance, permanent way, equipment, safety

B & W photos - x2 of Homans and x1 of Sawmill with titles in white on the bottom left hand corner. And one other photo of a building in snowHowmans Dam; Howmans Gap; Saw Mill

This all-metal centre pop punch tool has a rounded point, thick body and flat round head. The centre of the body is concave to allow a strong grip. This also creates a flat side and would prevent the tool from rolling off the workbench. The ‘centre pop’ in a shipwright’s toolbox may have been used as a punch to remove the ‘eyes’ from a ‘dead eye’ pulley or other jobs that needed a hole removed from the work. The shipwright’s tools on display in the Great Circle Gallery are connected to the maritime history of Victoria through their past owner, user and donor, Laurie Dilks. Laurie began his career as a shipwright in the mid-1900s, following in the wake of the skilled carpenters who have over many centuries used their craft to build and maintain marine vessels and their fittings. You can see Laurie’s inscription on the tool called a ‘bevel’. Laurie worked for Ports and Harbours, Melbourne, for over 50 years, beginning in the early 1960s. He and a fellow shipwright inscribed their names on a wheelhouse they built in 1965; the inscription was discovered many decades later during a repair of the plumbing. Many decades later Laurie worked on the Yarra moving barges up and down the river and was fondly given the title ‘Riverboat Man’ His interest in maritime history led him to volunteer with the Maritime Trust of Australia’s project to restore and preserve the historic WWII 1942 Corvette, the minesweeper HMAS Castlemaine, which is a sister ship to the HMAS Warrnambool J202. Laurie Dilks donated two handmade displays of some of his tools in the late 1970s to early-1980s. The varnished timber boards displayed the tools below together with brass plaques. During the upgrade of the Great Circle Gallery Laurie’s tools were transferred to the new display you see there today. He also donated tools to Queenscliffe Maritime Museum and Clunes Museum.The shipwright’s tools on display in the Great Circle Gallery are connected to the maritime history of Victoria through their past owner, user and donor, Laurie Dilks. Laurie began his career as a shipwright at Ports and Harbours in Melbourne in the mid-1900s, following in the wake of the skilled carpenters who have over many centuries used their craft to build and maintain marine vessels and their fittings.Centre pop tool; all metal punch with a flat head, wide handle section and a shaft that tapers inwards towards the end. It is shaped for a good grip. It once belonged to shipwright Laurie Dinks.flagstaff hill, warrnambool, great ocean road, shipwreck coast, maritime museum, maritime village, shipwright, carpenter, shipbuilding, ship repairs, hand tool, equipment, ship maintenance, cooper, tool, marine technology, shackle punch, breakdown tool, chains, links, centre pop, punch, laurie dilks, l dilks, port and harbours melbourne

Note by T.H. Kneen 19 November 1991, "View of house from croquet lawn flanked by elm, Cupressus sempervirens on left and Cupressus spp. On right. Note wheelbarrow with gardening tools and watering can." (Also see B91.11.)Black and white photograph. Probably 1919. View of house from croquet lawn flanked by trees. On right, wheelbarrow with gardening tools and watering can.elm, trees, wheelbarrow, gardening tools, watering can, croquet lawn, principal's residence, cupressus sempervirens, cupressus spp.

Document. A piece of paper typed on in red titled 'The Legend of the Saw'. Describes a miners saw in the pioneer times on the goldfields and what it was used for. Signed at the end - H. C. Appears to have been a label that was with the saw in some sort of display.mining, bendigo, eaglehawk

This splicing tool is handmade on a forge. It is used for splicing in fibre and wire rope work to form a semi-permanent joint between two ropes, or parts of the same rope or steel cable. The rope is partly untwisted and then the strands are interwoven. Splices can be used to form a stopper at the end of a line, to form a loop or an eye in a rope, or to join two ropes together. Splices are preferred to knotted rope; a knot typically can reduce the strength by 20–40%, but a splice is capable of attaining a rope's full strength. This homemade, handmade splicer is an example of a tool used to splice a cable or rope, a craft that was in much need onboard a sailing ship. Splicing tool; a spike on one end and a flat blade on the other, with goose-neck centre for leverage. Handmade.warrnambool, shipwreck coast, flagstaff hill, flagstaff hill maritime museum, flagstaff hill maritime village, splicing tool, rope work, rope strands, knot making, netting, net making, sailmaker's tool

The Dovetail Joint probably pre-dates written History. Some of the earliest known examples of the Dovetail Joint are in furniture entombed with Mummies dating from the first Dynasty of ancient Egypt as well as the tombs ofChinese emperors. Untill the late 1960s it was commonly used for Joining drawer fronts and sides in cabinets. " Wikipedia "Dove Tail Saw , Shefield mark saw dovetail woodwork drawers

Port of Portland Authority archive.Front: (no inscriptions) Back: Company's Head Sawdoctor, K. Schultz at work (upper left) (pencil). G2611 (lower left, black pen). G2611 (lower right, pencil). Ray Glyde Creative Commercial & General Photography 21 Prescott Terrace Rose Park, South Australia (lower left, red stamp)port of portland

Saw tooth set metal Atlasflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, saw tooth set

Surgeons Finger Saw. Length 230mmflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, surgeons finger saw, finger saw

Tenon saw with black wooden handle."Coreter"woodworking saws

Uncle Brien says this tool was used for collecting yabbies and mussles from water holes.This stone has been worked to a smooth curve around the edge , is flat on one side and curved on the other. The stone has 2 grooves carved on the blunt end for attaching a handle. This tool is similar to 0016.basalt digging stone, jaara, aboriginal stone tools.

Saw tooth set metal with spatula shaped head with 3 saw sets on each side 205mm x 47mm. Heavily corroded flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, saw tooth set

Yields information about rails and demonstrates the type of rail used in tramways.Section of flanged tramway rail - saw cut from rail, finished and stamped "102" along the foot of the rail. Shows saw cuts.102trams, tramways, rail, rail section, btm, ballarat tramways