Benelec Microphone Dynamic Microphone model 7-704

Dynamic Microphone Benelec Microphone Model 7 -703

Model of the Swift

Very little is known about this ship and it disappeared from records after the return voyage to England. Skippered by Master Readthorn Hobson, this ship weighed 375 tons, was 75 ft long and had a beam of 22ft. She was built at Sunderland in England in 1785, only two years before the trip to Australia Model of the "Borrowdale" first fleet

The Fishburn, like the other storeships, disappeared from all records after returning to England from her epic voyage. She was skippered by Master Robert Brown and weighed 378 tons. Built at Whitby in 1780. Model of "The Fishburn"

Charlotte, one of the ‘two ladies’ of the fleet, was built on the River Thames in 1784 as a three masted, two-decker, barque built ship, weighing 345 tons. Charlotte was chartered by the Admiralty from its owner Mr Matthews late in 1786. She was fixed out at Deptford, one of the royal dockyards established to build, repair and victual ships of the Royal Navy. Her master for the voyage to Botany Bay was Captain Thomas Gilbert. Charlotte carried 88 male convicts and 20 female, among them were Thomas Akers, James Squire, James Bloodworth, James Underwood, Samuel Lightfoot and the later-to-be-famous Mary Bryant. Described as a light or slow sailor Charlotte had her fair share of accidents through rough winds and collisions of others ships.Model of the "Charlotte"

Display Modelequipment, ran

Model of Memorialmodel, post ww1, general

The H M A S Goorangai was struck by the M V 'Duntroon' on the night of 20/11/1940 in the South Channel of Port Phillip Bay. All 24 crew members of the Goorangai were lost.Model of 'Goorangai" G Rduntroon, port phillip bay, ship models

The first all transistor hearing aids appeared in 1953. They were created to replace vacuum tubes; they were small, required less battery power and had less distortion and heat than their predecessor. The vacuum tubes were typically hot and fragile, so the transistor was the ideal replacement. The size of these transistors led to developments in miniature, carbon microphones. These microphones could be mounted on various items. There were body hearing aids where the earpiece was connected to the hearing aid and battery pack worn on the body. Ear level hearing aids consisted of eyeglass, behind the ear (BTE), in the ear (ITE), and in the canal (ITC, CIC) hearing aids. Hearing aid with Pink and silver metal pack with attached wire to ear piece. Uses (A) battery. Ear piece moulded for wearer with dials for adjustments. In original box. Transitone and Universal Hearing Aids were manufactured by British Hearing Aids (Aust) P/L. Model 61T. NoV848 "TRANSITONE & UNIVERSAL/HEARING AIDS/BRITISH HEARING AIDS (AUST) P/L" printed on fabric inside lid of box. Inside battery compartment, label "MODEL 61T" ('T' handwritten) "V848" inscribed on hinge.

Made by Mr. A. Flederis.Large wooden model of two-storey turretted house with verandahs. Model is equipped with lights.Front: Signs reading "DONT TOUCH" (sic) attached.

Scrapbook titled Flying Model Aeroplanes containing newspaper cuttings relating to model aeroplanes.books, technical, model aeroplanes

Possibly WWII trench art.Model cast iron truck with 2 front wheels missing. Model is in 2 halves.Nil

It is believed that is item was constructed by a veteran in the 1920s. An identical cenotaph to that in Whitehall, London was constructed outside Parliament house in Spring st Melbourne,Australia.This model could be an engineering model for our Spring st version. please contact Caulfield RSL if you have more information. A highly accurate well detailed brass scale model,22 cm high of the original first world war memorial the "Cenotaph" at Whitehall London the UKs national war memorial. An identical cenotaph was constructed outside Parliament house in Spring st Melbourne, Australia.The design is made up of a rectangular base a broad pillar and the cenotaph or coffin on top of the pillar. 3 wreaths also feature, 2 on the narrower sides of the pillar with the years 1914 and 1918 and one wreath on top of the coffin. It has 2 coats of paint on it the second(exposed) being a poor uneven coat of, off white gloss enamel, possibly just house paint.No makers marks or date can be found on the exterior of the model. Visible are the words " THE GLORIOUS DEAD" on each of the narrow sides of the model above each wreath is a year in Roman numerals.One side side for the beggining of world war one "MCMXIV" 1914 and "MCMXIX" 1919 for the official endcenotaph, whitehall

SALVAGEMAN of Hull (1980-) Owned by United Towing of Hull, she was the UK's largest and most powerful salvage tug for many years. In 1982 she saw service at the Falklands and played a part in the sinking and subsequent salvage of the Argentinian submarine Santa Fe. She was sold and renamed HISPANIA in 1991. Sold once again in 1996 and became the ANGLIAN PRINCE, a name that she still holds. 1977: Ordered and laid down as NOBLEMAN by "United Towing (Nobleman) Ltd", 1979 -12/07: Launched by "Chung Wah Shipbuilding & Engineering Co Ltd" at Hong Kong (HKG) (YN 160) 1980 -17/04: delivered to "UTC - United Towing Co (Howe) Ltd" at Hull (GBR) 1981 -16/03: mng "UTC - United Towing Co (Ocean Tugs) Ltd" at Hull (GBR), as SALVAGEMAN (GBR flag, regd Hull, ON 386484, c/s GXYN) 1987: taken over by "Howard Smith UK Ltd" at Hull (GBR) 1990 -24/04: To "Salvageman Ltd" at Douglas (IOM) 1991: To "COSMAR SA" (ESP), mng "Baluda Offshore" at Bilbao (ESP), renamed HISPANIA 1991 -25/7: British register closed and transferred to Spanish register (ESP flag, regd Bilbao, c/s EADY, 1597 GRT, 461 NRT) 1996: To "KTL - Klyne Tugs (Lowestoft) Ltd" at Lowestoft (GBR), renamed ANGLIAN PRINCEShip builder's model - Body of moulded polyurethane painted in maroon and black, the deck in colours of green and cream with detailed fittings, machinery, rigging and superstructure, raised on a wooden base. Ship was built by Chung Wah Shipbuilding & Engineering Co. on base of case: "M.T. SALVAGEMAN/BUILT 1979 BY/ CHUNG WAH SHIPBUILDING & ENGINEERING CO LTD HONG KONG/ FOR/ UNITED TOWING LTD/ LENGTH O/A 68.25M BREADTH MLD 14.20M DEPTH MLD. 6.80M" On model: "SALVAGEMAN/ SALVAGEMAN HULL/ SALVAGEMAN HULL"

Cardboard, punched out, folding model tram - Siemens 3 section Combino printed for the 100 years of Electric Trams in Melbourne, Yarra Trams. with the centenary logo in the top left hand corner. Has assembly notes. Printed as a postcard on the reverse with area for a stamp with 100years trams logo, Yarra tram and Siemens logos. A5 size. Two copies held. See Reg Item 109 for a A4 size.Has a $7 price sticker on the front of the card.trams, tramways, models, siemens, yarra trams, centenary

Black box containing a Matrix Braille writing machine, with a 24mm-wide paper spool attached to the feeding mechanism. Corner of box is hinged and lifts up to reveal keyboard. Top half of box lifts to reveal Braille writer which is bolted to a wooden base that can be lifted out. The base is secured with a metal latch. Machine has black Bakelite keys with rubber pads beneath make this a "silent" machine; wooden case has black leather-like covering, hinged lid, metal clasps, and leather handle on the side. "Model G, Matrix, Coventry Gauge & Tool Company, Ltd., No. 1183, For The Royal National Institute for the Blind, London W.I." is stamped on the front,Black vinyl-covered case containing black metal writer and paper spool"Model G, Matrix, Coventry Gauge & Tool Company, Ltd., No. 1183, For The Royal National Institute for the Blind, London W.I." is stamped on the front.braille equipment, royal national institute for the blind

When this AVOMETER was being utilised in the early 1950's it was at the "leading" edge of electrical measuring instrumentation.The first meter was produced by Automatic Coil Winder and Electrical Equipment Co. in 1923. This model was produced in the time from 1933 to 1951 when it was superseded by the most popular model, Model 8 (1951 to 2008).This AVO meter brought the measuring of three electrical power indicators i.e., amps, volts and ohms into one measuring unit. By using a "one fits all" unit, the carrying of separate measuring devices was reduced considerably. The need for a mountainous and a large area of operational requirements, such as the SEC Vic Kiewa Hydro Electricity Scheme, to minimise the weight of equipment carried by electricians and technicians was of the utmost relevance. The significance of this meter to the Kiewa Valley region relates to the impact of modern technology (at that time) upon a mainly rural environment. This equipment shows how the boost of "modern" equipment into the area because of the "Hydro Scheme" was facilitated a lot faster than would have taken under "normal" evolutionary time. The speed of information on all "new technology" had a relatively slow assimilation rate to those living in rural communities. This AVOMETER is a Model 7 MKII, production pre 1951. This meter measures electrical Amps, Volts and Ohms and has two internal batteries for its power. The main casing is made from aluminium with a bake-lite front. The front has a "window" detailing, with a needle pointer, the amount of electrical power being tested. There are two big dial switches, detailing Direct Current(DC) and Alternating Current(AC) when reading measurements of Ampere, Voltage and Ohms for power. This meter took the place of three or four meters used earlier. Modern meters (2000 onwards) have become digilised and are considerably lighter in weight and smaller. There are two electrical connection leads (one black and one red) each has a removable clasp and is 125cm long.Molded on the front centre panel " UNIVERSAL AVOMETER". Below this and above the left hand dial "D.C. SWITCH" .Above the right hand switch the right "A.C. SWITCH". On the left of each switch is an arrow pointing to it.The left switch is marked with a "+" and the right one with a "-". There is a "divisional 2" mark. Between and below the dials is "CUT OUT" plunger.electrical meters, electrical equipment, sec vic., state electricity commission of victoria, mt beauty, bogong village

Originally this teaching model belonged to Prince Henry's hospital library and was transferred to the Monash Medical Centre, Clayton in the 1970s by Sister Gertrude Berger, a famous nurse-educator, who is best known for her work leading up to the transfer of nursing education in Victoria from hospitals to universities in 1986.Gerty (as she was known in the School of Nursing) bought them in Europe in the late 1940s and early 1950s.Teaching model. Female Pelvis, cross section, flat 3D panel. Painted plaster on painted timber. Originally from Prince Henry's Hospital Nurses Library [ traces of stamp "PRINCE HENRYS HOSPITAL NURSES LIBRARY" on l.l.].teaching model, anatomy, female pelvis

Model of Melbourne Restaurant tram No. 939 in a presentation cardboard box, made by Cooee Concepts Pty Ltd in China. Tram secured into the card box by two screws just behind the life guard. Made from plastic with trolley poles from metal (trolley poles can be moved) black roof, red sides, black No. 15 trucks, with the Skyline space marked "RESTAURANT" The box has the side on view of the tram in the background. trams, tramways, models, restaurant tram, cooee models, cuthberts 939

A PHOTOGRAPH OF A SECTION OF THE MODEL OF THE PORT PHILLIP MINE MADE IN 1858. THE MODEL IS NOW AT MUSEUM VICTORIA.local history, photography, photographs, mining, model

A agreement relating to the loan and ongoing custodianbship of three items from the Ballarat School of Mines Museum. The Model Dray, Model Phoenix Locomotive, Model Battery and Model HV McKay Smithy are to remain in the custody of Sovereign Hill, plaques to be placed in each model to display Ballarat School of Mines involvement in their creation, and if Sovereign Hill no longer requires the models ownership to be returned to the Ballarat School of Mines (nor Federation University Australia)model, agreement, museum, model dray, model phoenix locomotive, model battery, model hv mckay smtihy

This unnamed ship model was built by a Warrnambool resident. The Humber Keel design is typical sailing craft used for transport if inshore and inland cargo, from Humber and Hill, around Yorkshire, U.K. in late 19th and early 20th century. Ship model, single mast, double spar, humber keel. Two tone brown and cream paint, light brown sail. Figures of a man, woman and dog on deck. A type of vessel used on the Yorkshire waterways. Perspex case with wooden frame. Folded plans are inside case. Nameplate Plaque inside case describes ship."RIVER HUMBER KEEL/YORKSHIRE/LENGTH 61', BEAM 15'6", DR G CAP 100 TONS/CREW MAN & WIFE, SCALE 1:40/HUON PINE etc. E.H. GRANGER 28.1.1985" on plaque inside caseflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, humber keel, sailing cargo

This ship of 375 tons had the distinction of carrying the Reverend Richard Johnson - the first chaplain to the colony - and his wife. After returning to England to work the London Jamaica run, she disappeared from records after 1804. She was built in 1780 at Whitby and was skippered by Master Sharp for the first fleet voyage. Model of the Golden Grove first fleet

The supply was the smallest of the fleet being only 170 tons and 70 feet long. Carrying 50 people and skippered by Captain Henry Bull, she led the fleet most of the way primarily because of her speed. Little is known of this brig's early history, but it seems she was built in America in 1759 and was commissioned by the Admiralty in October 1786. The Supply returned to England where she was renamed the Thomas & Nancy. The ship seems to have carried coal on the Thames until around 1806. Model of the HMS Supply

This ship carried only one male convict and 49 female convicts. She was of 350 tons and skippered by Master John Mason. Built at the Thames in 1786, She operated in England until 1797 when her registration transferred to Fort Royal. Martinique, after which little is known. Model of "The Prince of Wales"