A Photograph of three bare chested soldiers with a 105 Howitzer, a Field Battery FSB BETH March 1971 BDR Rod Parker, GNRs Peter Stephenson & David Gibson firing in support of 3 RAR-OP Briar Patch 1photograph, 3 rar, field battery, gibson, parker, stephenson, operation briar patch

Black and white photograph of the completed underframe of the Horse tram No. 1 in front of 5 road at the museum depot, June 1987, taken at same time as photograph in Reg. No. 737. Note the truss rods of the cable truck have yet to be fitted. trams, tramways, horse tram no. 1, btps, tramcars, reconstruction , tram 1

A Wilson Young Champ tennis racquet. Racquet features red/white plastic whipping, and a crown and rod illustration on the throat on the obverse. Materials: Wood, Nylon, Plastic, Vinyl, Adhesive tape, Leather, Paint, Glue, Lacquer, Metal, Inktennis

Sepia image of a group of miners sitting and standing in front of a wooden structure. Some of the men are holding candles, one man is holding a long rod. Image has been mounted on cream backing card with a blue border around the image.Text, mounting card: " Millist & Webb PHOTO., PITFIELD PLAINS. "pitfield, pitfield plains, mining, miners

Gas works closed in 1959 due to wide use of bottle gas after seventy yearsBlack and white photograph of workmen Rod McNamara, Peter Taylor, Rocky McNamara in drays, Arthur McNamara Tom McNamara Snr Mr Carusso Manager standing at gas works with horses, drays and shovels for moving coal Bairnsdale Victoriabusinesses, social history

Letter written by David Frost to Rod Atkins, detailing the disposal of some of the Victorian Railways Trams - c1990. Includes the four wheel (2nd batch) and surviving bogie trams at the time. Refers to a book - "Preserved railway and tramway rolling stock in Australia" - Peter Charrett, 1977. Yields information about the disposal of VR trams.Letter - typed on quarto paper undatedtramcars, victorian railways, preserved trams, sale of trams, scrapped, scrapped trams, david frost

Cold chisel; long metal rod with round flat head, six sides with one being slightly indented. Shank tapers to a flat end with a narrow blade. Inscription impressed into metal with a deliberate indented line on it. Size 1/2 inch. " - - CT STEEL" flagstaff hill maritime museum and village, warrnambool, chisel, cole chisel, forging tool, hand tool

This coat hanger has been used in the Warrnambool department store of Cramond and Dickson. John Glass Cramond and James Dickson established a shop in Warrnambool in 1855 in Timor Street and moved to Liebig Street a few years later. New premises were erected in 1878 and the department store selling mens and ladies wear on the corner of Liebig and Timor Streets was a landmark building in Warrnambool until the business closed in 1973. Cramond and Dickson had their own tailors and milliners. This coat hanger is of interest as a memento of the store of Cramond and Dickson, a business that operated in Warrnambool for over 100 years. This is a wooden coat hanger in a curved shape with a part of the wood at one end missing. The centre of the hanger has a hole pierced through with a metal hook inserted for hanging on to a rod. The hook is somewhat rusted. The maker’s name is printed on the hanger in black lettering. ‘Tailors & Outfitters Cramond & Dickson Warrnambool Made in Germany’ cramond and dickson, history of warrnambool

Dunlop Maxply Fort tennis racquet. Tag attached to racquet states: To Mr Geoff Pollard...Tennis Aust...'This is an old racquet that Rod Laver used' and is signed by '????? Laver'. Name unclear and object history not verified. Materials: Metal, Wood, Leathertennis

Lightweight curtains like this were used in homes in the 1900's to filter the light and decorate the home.White cotton broderie anglaise curtain with feature embroidery, cutwork and needle lace. Has one small strip of small four dot pattern above wide pattern. Finished with a scalloped edge. Has 5cm casing at top for a curtain rod.curtains, window accessories, textiles, furnishings, soft furnishings

This 'Dayton Scale' was used in a grocery shop in Moorabbin Shire in 20thC to measure grain, sugar, fruit, vegetables, lollies, etc as required by the shopkeeper for the purchase by customers. The Dayton Scale Company, originally known as the Computing Scale Company, built and marketed the first computing scale in 1891. It was part of the Computing-Tabulating-Recording Company formed in 1911, and became an IBM division in 1933. The Dayton Scale Division was eventually sold to the Hobart Manufacturing Company when IBM decided to stop marketing scales to retail stores. The Computing Scale Company of Dayton was operated from 1891-1914 by two businessmen from Dayton, Ohio who purchased patents on the recently invented computing scale. It was merged with other companies to become the forerunner company for IBM. On July 20 1897 Mr CC Hobart & Herbert L. Johnson formed the Hobart Electrical Manufacturing Company in Troy, Ohio USA. 1915 Hobart continues its growth into the World market, opening a sales office in Australia. Dayton grocery scales, capacity 2 pounds, Imperial Measure. It is made from white painted steel with a large metal scoop that sits on 2 steel rods attached to a balance beam connected to a recording mechanism that displays the ‘weight’ in a glass framed gauge. In window of glass framed gauge ; DAYTON SCALE CO. / OHIO USA ; Computed from 0 – 2LB in 1oz sections weights, measures, shops, scales. balances, grocery stores, early settlers, moorabbin, bentleigh, cheltenham, dayton scales company, ibm pty ltd., hobarrt electrical manufacturing company, hobart c.c., johnson herbert l, computing scale company ohio

Pittock Collection : three tube spanners, varying in length (hexagon - 152, hexagon - 126 & square - 117mm). Extruded steel construction, no rod/s evident in coach builder's bag, reference 13000.2. Items stored in coach builder's bag, reference 13000.1.

A metal Chemold Rod Laver 'Grand Slam' tennis racquet with double shaft and metal bridge. Black plastic shaft casing and butt cap. Handle wrapped with brown leather grip tape. Materials: Metal, Plastic, Leather, Nylon, Adhesive tapetennis

A pair of iron resting bars built into the smokehouse fireplace. Each bar is cylindrical, and they are placed one behind the other near the base of the fireplace. They both have a large iron bolt which passes through the centre of the rod. The front bar is bent in the middle.No visible markingsfood technology, food processing, smokehouse, curing, fire, meat, iron

Cream celluloid' Zylonite' shaving companion. It consists of an adjustable round mirror supported on a rod and standing on a round shaped bowl with a lid on top with a round hole in which a shaving brush was inserted. The bowl probably had a bowl insert to hold hot water.personal effects-toilet requisites, shaving

Item issued to Anthony Richard Thomas No 3798215, served Vietnam with 1st Australian Reinforcement Unit (ARU) 24.12.1970 - 20.1.1970, 2 RAR 21.1.1971 - 1.6.1971.Cleaning kit for M-16 Armalite rifle. .1) 4 piece cleaning rod, 1 end unurled ( 3 of the pieces have a threaded end) .2) Wire bristle brush with two sizes. .3) Wire bristle brush for cleaning rag.cleaning kit, armalite, m - 16, thomas

Leatherwork was offered to clients at the Ballarat office of Vision Australia, involving the use of jigs to help align punch marks. This jig was donated by "G.A. Arnold P/L 98-106 Moray St, South Melbourne" and its users were advised to "Clean and oil weekly" according to the 2 metal plates attached to the base plate that the jig was affixed to. A small metal bar runs across the middle of the base plate, to assist in correct alignment, with a black ball handle situated above a metal rod to allow users to push downwards on to a secondary rod (held in place by a cylinder) at the end of which is a punch. The cylinder that holds the punch in place is attached to a broader black metal attachment that is screwed into the base plate. The punch remains at the centre, however this image was taken before the centre's refurbishment.Metal sheet with ridges to align items above a punch activated by a lever pushed downwardsG.A. Arnold P/L 98-106 Moray St, South Melbournerecreation equipment, vision australia

These stirring rods with long handles and base referred to as a dasher were common in the dairy industry. They were made to agitate milk or cream in milk cans and were used on dairy farms and in old creameries. They helped to cool the milk and stop it from separating. They were used on the properties of the Conway and Lemke families in Wodonga.These items are significant as they are representative of tools used in the early dairy industry and were owned by families in Wodonga.Milk / cream stirrers made from steel with a circular blade attached to enable milk to flow through.dairy industry wodonga, dairy tools, dairy machinery

The Community Heritage Grants (CHG) program supports community organisations to look after Australian cultural heritage collections. In 2005, Vision Australia was a recipient of one of these awards. Archivist Anna Fairclough attended the ceremony at the National Library of Australia. and received the award from Senator Rod Kemp, Minister for Arts and Sport. 3 coloured photographs taken during Community Heritage Grant award ceremonyvision australia, anna fairclough, rod kemp

A large gas lantern with two lights, one on either side of a central hanging rod, each with a mantle. The fuel container is shaped like a ball. The lantern has a silver / metall apprearance. The glass shades which would have covered the mantles do not exisiting.gas-lantern mantle-lantern

Belonged to and used by Patrick O'Kane 1872 - 1947 in the Burramine/Boosey districtHeavy all iron well bucket. Riveted together in two halves (top and bottom). Made from metal sheets riveted together, also strengthened with iron straps. It has a large, round iron rod turned into a hook which is attached across the top.nonebucket

Black and white side elevation photograph of the completed underframe of the Horse tram No. 1 in front of 5 road at the museum depot, June 1987, taken at same time as photograph in Reg. No. 737 and 750. Note the truss rods of the cable truck have yet to be fitted.trams, tramways, horse tram no. 1, btps, tramcars, reconstruction , tram 1

Skein holder is from c1890-1900 and used by four generations of the donor's family who lived around Woori Yallock and Yellingbo. Donor's family descended from settler John Douthie (1831-1897), his son Andrew Douthie married Jessie Sands Smith (1875 - 1948). Item believed to have been owned by Jessie who passed it on to her fourth child, Mary, who passed it to her child Lillian who passed it to her daughter Leanne, the donor. No makers mark on item. Mary worked as a teacher and sewing mistress at Woori Yallock Primary School and used the item in her personal time to make clothing for the family.An umbrella-style wooden skein holder with a metal clamp at the base to allow it to attach to a table or similar. When not in use, item is small and compact, however once unfolded the arms extend out in an umbrella shape with thin timber rods bound together with leather ties.

Black and white photograph of five men Doug Winch Master of April Hamer, Peter Clark and Denis Shepherd fishermen, David Jones CEO Gippsland Ports and Rod Thomas Manager of Gippsland Ports at inaurgural meeting of Gippsland Ports Lakes Entrance Victoriaboats and boating, gippsland ports, port authority

This device was used to measure surface wind speed and direction. This anemometer was located on a concrete pad outside room 2.15 on a steel pole. The pole was considered unsafe and the anemometer was relocated to it's current position. When lowering the pole it fell over and was badly damaged. The Bureau of Meteorology donated it to the museum. It was then repaired and restored. The central pole on which it is mounted is galvanised iron pipe painted black. The anemometer, a portable device that manually measures wind speed, was a necessary instrument once common to all weather stations. The arms are attached to a vertical rod and as the wind blows, the cups rotate, making the rod spin. The stronger the wind blows, the faster the rod spins. The anemometer counts the number of rotations, or turns, which is used to calculate wind speed, surface wind and direction. They were designed to be durable to withstand the corrosive environment and strong winds expected at coastal sites such as those at Gabo Island. Anemometers existed in the nineteenth century and their design was improved by various experts including John Robinson in 1846, John Patterson in 1926, Brevoort and Joiner in 1935 and Derek Watson in 1991 who added wind direction measurement to its functions. This example was made for the Bureau of Meteorology by the Melbourne instrument company, Synchrotac, which became registered and incorporated on 26 July 1966. It is now displayed inside the building. A good example of its kind, the anemometer has first level contributory significance for its historic value and provenance to the lightstation.Anemometer and tripod stand. Three cupped brass discs on rotating arms fixed to turned brass cylinder shaped shaft. Beneath discs is a lead directional wind arrow attached to a rotating arm. A wooden three legged stand with central supporting pole of black painted hardwood and attached to a white painted marine ply circular base.Under wind cups: " SYNCHROTAC / MELB. / ser.no.70/372 / MADE IN AUSTRALIA." Above wind direction arrow: "C.OF.APT..../ SYNCHROTAC / MELB ? MADE IN AUSTRALIA / ser.no.70/372"