Showing 11821 items
matching enders
-
Federation University Historical Collection
Banner, Calligraphic Scroll
Gift to the Faculty of Education A calligraphic scroll stating "No end for learning calligraphy, asian, calligraphic scroll -
Seaworks Maritime Museum
Spanner
Black, double ended, superslim spannerMADE IN ENGLAND/3/8W7/16/BSF/5/16W3/8BSF/SUPERSLIM/3/8W7/16/BSF/5/16W3/8BSF/port melbourne authority (pma) -
University of Melbourne, Burnley Campus Archives
Photograph - Black and white print, 92
Staff and student end of year party.staff, students end of year, party, mrs. jessep, alexander william jessep, principal, a.w. jessep -
Flagstaff Hill Maritime Museum and Village
Spatula
Spatula (or fork) wooden with broken endflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Flagstaff Hill Maritime Museum and Village
Marking Gauge
Gauge screw at end. Screw is missingflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Flagstaff Hill Maritime Museum and Village
Spanner
"S" Spanner metal double ended. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, "s" spanner -
Running Rabbits Military Museum operated by the Upwey Belgrave RSL Sub Branch
Swagger Stick
Swagger stick wood with brass endsequipment, ww2, army -
South West Healthcare
Straight Artery Forceps, Medical Equipment, 20th Century
Stainless steel forceps with straight end"STAINLESS" "HENSLER" -
Tarnagulla History Archive
The Goldfields of Victoria Reports - The Mining Registrars
David Gordon Collection. For the Quarter ended 30th June 1886 -
The 5th/6th Battalion Royal Victoria Regiment Historical Collection
Tool - Trophy, Pick Handel
Likeley used by members of Pioneer Platoon Varnished pick handel with chromed ends wark vc club, support company, pioneers -
Ringwood RSL Sub-Branch
Ammunition, Projectile
WW2 vintageCast iron projectile pointed end -
Merbein District Historical Society
Tool - Drainage rods, Drainage rod
drainage rod used to unblock drains and clean them from vine roots steel long rod with a spiral end block drainage rod, block, horticulture -
Central Highlands Tourist Railway (Daylesford Spa Country Railway)
Vehicle - Double Ended Leyland Rail Motor, Victorian Railways, 53RM, 1926
Double Ended Leyland Rail Motorvictorian railways, rail motor -
Kiewa Valley Historical Society
Mathieu's Needle Holder - long
This medical / hospital instrument was used in the Tawonga District General Hospital which was built in the 1950s specifically for the increase in population due to the Kiewa Hydro Scheme. Historical: Shows the development of scientific hospital equipment. Provenance: Used in the Tawonga District General Hospital which was remote and therefore required good equipment. Good condition and good interpretation capacity.In sterilised bag. Steel medical instrument used as scissors for holding needles. The handle section is very long with teeth at the end enabling that end to join. In between the two handles is a piece of steel running lengthwise and attached at the end to each handle (goes across). The scissor end is short and blunt. Used as a needle holder during operations. medical instrument. hospital instrument. mt beauty. tawonga. doctor. nurse. needle. -
Flagstaff Hill Maritime Museum and Village
Tool - Caulking mallet, mid-to-late 20th century
Caulking is the use of cork or other substances to seal the seams and joints of the vessel to make them watertight. Caulking lasts for quite some time but eventually dries out and needs to be replaced. A mallet or hammer is often used with a caulking iron to drive it along the seams. The caulking iron’s blade is tapered to be narrower at the tip to make it easier to remove it from the joint. The shipwright’s tools on display in the Great Circle Gallery are connected to the maritime history of Victoria through their past owner, user and donor, Laurie Dilks. Laurie began his career as a shipwright in the mid-1900s, following in the wake of the skilled carpenters who have over many centuries used their craft to build and maintain marine vessels and their fittings. You can see Laurie’s inscription on the tool called a ‘bevel’. Laurie worked for Ports and Harbours, Melbourne, for over 50 years, beginning in the early 1960s. He and a fellow shipwright inscribed their names on a wheelhouse they built in 1965; the inscription was discovered many decades later during a repair of the plumbing. Many decades later Laurie worked on the Yarra moving barges up and down the river and was fondly given the title ‘Riverboat Man’ His interest in maritime history led him to volunteer with the Maritime Trust of Australia’s project to restore and preserve the historic WWII 1942 Corvette, the minesweeper HMAS Castlemaine, which is a sister ship to the HMAS Warrnambool J202. Laurie Dilks donated two handmade displays of some of his tools in the late 1970s to early-1980s. The varnished timber boards displayed the tools below together with brass plaques. During the upgrade of the Great Circle Gallery Laurie’s tools were transferred to the new display you see there today. He also donated tools to Queenscliffe Maritime Museum and Clunes Museum.The shipwright’s tools on display in the Great Circle Gallery are connected to the maritime history of Victoria through their past owner, user and donor, Laurie Dilks. Laurie began his career as a shipwright at Ports and Harbours in Melbourne in the mid-1900s, following in the wake of the skilled carpenters who have over many centuries used their craft to build and maintain marine vessels and their fittings.Caulking mallet; a thick wooden handle with a round ‘T’ cross-bar near the end. Metal reinforcing is added around the ends of the head. Both sides of the wooden head are flared outwards towards the end. The head is reinforced where it intersects with the handle and around the ends of the head just above the tips. It once belonged to shipwright Laurie Dinks.flagstaff hill, maritime museum, maritime village, warrnambool, shipwreck coast, great ocean road, shipwright, carpenter, shipbuilding, ship repairs, hand tool, equipment, caulking, ship maintenance, cooper, shipwright’s tools, shipwrights’ tools, tools, maritime trade, caulking mallet, caulking iron, laurie dilks, l dilks, port and harbours melbourne -
Warrnambool and District Historical Society Inc.
Musical Instrument, Accordian, Late 19th century
Accordians came into being around the start of the 19th century and has become a well loved instrument. It is thought that they originated from areas in Austria and Germany but over the following century its popularity has spread to all parts of the world. Accordians come in various sizes but all operate on the same wind principle. An object which is relatively common .Brown wooden ends with metal buttons with concertina section painted blue with black edge.Two glass buttons on one end with dark pink and clear glass centres. Parts of the wood work are decorated with scroll work. two metal discs with diagrams of lyres on end above the buttons. Remains of floral pattern around each end.warrnambool, button accordian -
Kew Historical Society Inc
Photograph, Studley Park [Toll] Bridge, Kew, 1870s
‘Studley Park Bridge’ or ‘penny bridge’ linked Church Street in Abbotsford and what is now Yarra Bend Park. The privately constructed bridge opened in 1857, gaining its popular name from the toll charged at the Abbotsford end. The engineer of the 485ft wide bridge was Mr. Austin and the builder was ‘Mr Grant, who threw the bridge over the Niagara’. Following the opening of Johnston Street Bridge, declining tolls led to the Bridge falling into disrepair. Badly damaged by the flood of 1891, the Bridge was compulsorily acquired by the Government in 1899, and later dismantled and sold for firewood.This work forms part of the collection assembled by the historian Dorothy Rogers, that was donated to the Kew Historical Society by her son John Rogers in 2015. The manuscripts, photographs, maps, and documents were sourced by her from both family and local collections or produced as references for her print publications. Many were directly used by Rogers in writing ‘Lovely Old Homes of Kew’ (1961) and 'A History of Kew' (1973), or the numerous articles on local history that she produced for suburban newspapers. Most of the photographs in the collection include detailed annotations in her hand. The Rogers Collection provides a comprehensive insight into the working habits of a historian in the 1960s and 1970s. Together it forms the largest privately-donated collection within the archives of the Kew Historical Society.A print, taken in the 1960s by Dorothy Rogers, from an original albumen silver photograph now in the collection of the Kew Historical Society. The photograph shows the toll bridge (also known as the Penny Bridge) from the northern end."P[enny] Toll Bridge - built 1857. from old photo"studley park bridge, penny bridge, bridge, timber bridge, toll bridge -
Kiewa Valley Historical Society
Ski Skins - Pair
Ski skins and webbing were introduced into the Victorian Alps by European skiers. Enthusiasts travelled to enjoy the snow and to explore the Victorian Alps including the Bogong High Plains. This equipment enabled them to travel over snow without slipping when going up hills. They took the skins off when they wanted to slide down hills. In later years waxes were used for cross country skiing and then 'fish tail' markings on the back of skis to enable skiers to travel distances up and down mountains. Later developments also included motor transport (replacing horses to get to the snow line) and roads to take skiers to the ski fields and mechanised tows to take skiers up mountains so they could ski down (downhill skiing).Skiers visited the Bogong High Plains especially during the years of the State Electricity Commission of Victoria's construction of the Kiewa Hydro Electric Scheme from the 1930's onwards. Tourists to the area increased during this time and influenced the development of Falls Creek.Long cream strips with soft short 'fur' on one side and a type of strong hessian on the back with the length of the middle and sides stitched. At one end an adjustable strap is attached to a steel, hinged clasp and at the other end is a loop that fits over the ski. A quarter of the way from each end is a steel attachment for fastening over the ski - the 'toe' end with a rubber embossed flap and the other with a short and long strap each with a steel ring at the end.On the rubber attachment: 'vinersa/pat uno'ski skins; bogong high plains; falls creek -
Warrnambool and District Historical Society Inc.
Miners candle holder, Late 19th century
This candle holder has a sharpened point to push or hammer into soft rock and a hook to hang on a ledge or piece of rock. It is intended to be used in a mine and many residents of Warrnambool and district went to the gold mining districts in the 19th century. But it could have been used in the Warrnambool district if a small night light was required in one of the many local quarries or even in the search for coal deposits in the region. It could also have been used in a household.This miner’s candle holder has no known local provenance but it is retained as an interesting example of a candle holder used in the past.This is a thin piece of metal tapering to a point at one end and curving around in a loop at the other end to make a handle. Along the straight metal piece is attached a curved metal hook. At the end of the loop is an open-ended circular piece with a serrated top. The circular piece has a rectangular-shaped end piece which enables the hole in the curved piece to be pushed out or pulled in to make the hole smaller or bigger. The metal is much rusted. 19th century mining, history of warrnambool -
Warrnambool and District Historical Society Inc.
Tool, Miner's Pick
This miner’s pick was of the type used to extract limestone at the Warrnambool limestone quarries, mainly for buildings and walls. This pick cut the sides and across the top of the block and then the block was levered off the strata using a crowbar at an angle of 30° or 40°. These blocks were then reduced to the required size using cross-cut saws. There were about 12 limestone quarries operating in Warrnambool in the 19th century and limestone was extensively quarried for about 85 years to the 1930s when the quarrying ceased. Today there has been a small revival in the use of limestone blocks for building. Warrnambool also once had several bluestone quarries on the outskirts of the town. This miner’s pick is of considerable interest as an example of the type used in quarrying limestone in Warrnambool . Quarrying was once an important industry in Warrnambool. This miner’s pick has a short wooden handle with a metal stud inserted at the bottom end. The handle is rounded on the sides and tapers slightly from the top to the bottom. The metal pick has a curved shape with one blunt end and one sharp end. It has a cavity in the end nearest the blunt end and the wooden handle slots into this. The pick is painted black, green and orange, perhaps for display purposes. A handwritten information tag is attached to the handle. quarrying in warrnambool, limestone quarries in warrnambool -
Bendigo Historical Society Inc.
Functional object - Hooks
Items found with a metal detector by Barry Maggs in the Whipstick National Park. Three metal hooks, one is 28.5 centimeters long with a five-centimeter hook on the end the other is twenty-five centimeters long with a ten centimeter D shackle on the end. Both are very rusted. a; Is 28.5 centimeters long with a five centimeter hook on the end, b; Is twenty centimeters long with a ten centimeter D shackle on the end. c; Is nine centimeters long with a six centimeter hook, the other end has a two centimeter hole. barry maggs, whipstick national park, metal detection, metal hoooks -
Glenelg Shire Council Cultural Collection
Book - Bible and Prayer Book, George Eyre and Andrew Strahan, London, The Book of Common Prayer, 1821
Burgundy leather-bound text with board covers and gilt edged pages. Title on spine in gold lettering. Eight horizontal lines in gold on spine and thin gold line borders on covers. Gold decorative edge on internal leather of covers.religious book -
Lara RSL Sub Branch
Magazine - Senior scene Magazines
Souvenir end of war edition celebrating 50 years.SENIORS SCENE. Souvenir End Of War Editions. 1945-1995. -
Lara RSL Sub Branch
THe Sun Newspaper Dated 8/5/1945, Unconditional Surrender By Germans to All Allies - War Ends in Europe
The Sun Newspaper Dated 8/5/1945The Sun Newspaper Dated 8/5/1945Unconditional Surrender By Germans to All Allies - War Ends in Europeunconditional surrender by germans to all allies - war ends in europe -
Federation University Historical Collection
Book, The Bandsman's Everything Within, 1950
This book was part of the collection of Frank Wright OBE.Hard card covered book, 208 pages. Cover is cream, with very small maroon writing and title in black print. At bottom of the page is an ornate bordered title "Hinrichsen". Back cover: Black print on cream. Black print title on spine. Signature in blue ink "S. A. Freeman" in front end paperhinrichsen, bandsman, cook, wright, ball, geehl, composer, mortimer, lumb, highfield school band, besses boys' band, black dyke mills band, frank wright, freeman -
Flagstaff Hill Maritime Museum and Village
Tool - Wood Moulding Plane, 1844-1860
A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. All we known about John Ames is that he was a tool maker and retailer that operated a business in London early to mid 18th century. There are many of his tools including decorative moulding planes of all sizes and designs for sale around the world and that his tools in particular moulding planes are well sought after by collectors of vintage tools.A vintage tool made by a known maker, this item was made commercially for firms and individuals that worked in wood and needed a tool that could produce a ornamental finish to timber. The tool was used before routers and spindle moulders came into use after World War ll, a time when to produce a decorative moulding for a piece of furniture, door trims etc or other items had to be accomplished using hand tools and in particular one of these types of planes. These profiled planes came in various shapes and sizes to achieve a decorative finish. A significant tool from the early to mid 18th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Tools that were themselves hand made shows the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to produce a decorative finish that was needed to be made for any timber item.Moulding Plane one side has 4 screws heads visibleAmes J Heath (maker) stamped at end & 3/16 flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane moulding, moulding plane, plane, j heath, ames -
Flagstaff Hill Maritime Museum and Village
Tool - Wood Moulding Plane, 1844-1860
A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. This item is unmarked so the maker is unknown, these types of decorative moulding planes of all sizes and designs are for sale around the world and these tools are well sought after by collectors of vintage tools.A vintage tool made by an un known maker, this item was made commercially for firms and individuals that worked in wood and needed a tool that could produce a ornamental finish to timber. The tool was used before routers and spindle moulders came into use after World War ll, a time when to produce a decorative moulding for a piece of furniture, door trims etc or other items had to be accomplished using hand tools and in particular one of these types of planes. These profiled planes came in various shapes and sizes to achieve a decorative finish. A significant tool from the early to mid 18th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Tools that were themselves hand made shows the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to produce a decorative finish that was needed to be made for any timber item.Moulding Plane J Heath (owner) stamped at one end (maker unknown)flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane moulding, moulding plane, plane, j heath -
Flagstaff Hill Maritime Museum and Village
Tool - Wood Moulding Plane, 1844-1860
A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. This item is unmarked so the maker is unknown, these types of decorative moulding planes of all sizes and designs are for sale around the world and these tools are well sought after by collectors of vintage tools.A vintage tool made by an un known maker, this item was made commercially for firms and individuals that worked in wood and needed a tool that could produce a ornamental finish to timber. The tool was used before routers and spindle moulders came into use after World War ll, a time when to produce a decorative moulding for a piece of furniture, door trims etc or other items had to be accomplished using hand tools and in particular one of these types of planes. These profiled planes came in various shapes and sizes to achieve a decorative finish. A significant tool from the early to mid 18th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Tools that were themselves hand made shows the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to produce a decorative finish that was needed to be made for any timber item.Moulding Plane J Heath (owner) stamped at one end (maker unknown)flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane moulding, moulding plane, plane, j heath -
Bendigo Military Museum
literary work - POEM
Rhyming poem written by LT. John Bartlett PERRY VX 25088 2nd Light Anti Aircraft regiment. Subject is his daily task of censoring his soldiers letters. 4 pages of lined paper containing a hand written Poe o 15 paragraphs each with 6 lines. Writing in pen black ink. Stapled together with a small sewing pin. Poem signed at end with “Copyright VX 25088 J.B. PERRY”poem, censoring -
Bendigo Military Museum
Book, R G Grant, MI5, 1989
Black, buckram hard cover, gold title on spine. Black dust cover with white lettering, contents description on back. 192 pages cut edges - illustrated.Donated by Bendigo Y Mens Club on front end page.books, history, espionage