The Shire of Eltham was introducing a number of traffic calming measures throughout the shire such as speed humps, roundabouts, chicanes and took a photographic record of various new installations.35mm colour positive transparency (2 of 11) Mount - whiteProcess Date "Apr M"infrastructure, roads, airlie road, montmorency, speedhumps

This object dates back to 1925 and was sectioned by Dr Geoffrey Kaye in 1938. Flowmeters were attached to an anaesthetic machine to measure the flow rate of gas or liquid.Metal cylinder with glass inner chamber and gauge inside. The object has been sectioned for teaching purposes.Inscription on top screw valve. "K/38, Screw Lightly, Oxygen Fine." Inscription on back of top screw valve. "Direct Ox." Inscription on top of flowmeter tube. "G. Kaye fecit. 1938"flowmeter, water depression, gas, sectioned, slight feed, anaesthetic machine

This Sike’s Hydrometer was donated by the Port Fairy Customs Office as it was no longer required by them due to a change in the law. The hydrometer was part of a system for Ullaging or calculating the amount of liquid remaining in a container of liquor such as a barrel, and the amount of alcoholic content in the contents. It can also measure the free space or head space remaining. Hydrometers were used to measure the density, or relative density, of liquids from the late 1600s. In 1816 Bartholomew Sikes won the competition for the most useful accurate hydrometer. Hydrometers were commonly used by distillers, vintners, and brewers to establish accurate measures of alcohol concentration in their beverages. Following this manufacturing process, government inspectors and excise officers used them to check that the labelled indications of alcohol-proof were correct and that the right amounts of duty were being paid.The Sikes hydrometer is of local significance because of its association with the Government's Customs Office in Port Fairy, in the southwest region of Victoria. It is also associated with Bartholomew Sikes, whose design of a hydrometer was chosen in 1816 as being the most useful and accurate hydrometer. The hydrometer has evolved into the digital version available today to measure density of liquids.Sikes Hydrometer and thermometer in a fitted wooden case with crimson lining inside the lid and dark lining in the base. The case has ten vertical pegs to secure the weights. The brass hydrometer has a spherical float and eight thick brass horseshoe-shaped weights. The serial number is on each section of the float and all weights. Both sides of the float’s upper flat stem have a scale from 0-10, with five divisions between each number. The eight weights are numbered from 20 – 90 in increments of 10. The set includes a mercury thermometer mounted on an ivory back plate labelled with Fahrenheit and Centigrade Scales. The Sikes hydrometer set was made by Loftus of London. The hydrometer model is IID 510, Serial Number is 14674, calibrated by Longs, London. All parts of the float and eight weights are inscribed with Serial Number “14674” The float stem is stamped "SIKE'S IID 51o” Calibrator, "LONG LITTLE TOWER ST LONDON" The weights are numbered individually ”20”, “30”, “40”, “50”, “60”, “70”, “80” or “90” Each weight in inscribed; symbol “(J L) [inside an ova, with textured background]” The thermometer inscribed: “LOFTUS OF LONDON”flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, measuring instruments, customs tax, weighing instrument, sike’s hydrometer, calibrator long of london, loftus of london instrument maker, loftus, j long, sikes hydrometer, scientific instrument, pressure measurement, measuring instrument, ullage tool, customs, excise duty, tax, alcohol content, proof, calibrate, standard weights and measures, tariff, scientific instrument makers, specific gravity, liquid density, alcohol testing, technology, alcohol measurement, proof spirit, wine and spirits merchants, local business, brass measuring instrument, port fairy, customs office, port fairy customs, joseph long, instrument maker

This type of balance scales allows precise measurements to be achieved by ensuring that the balance's fulcrum is essentially friction-free by attaching a pointer to the beam which amplifies any deviation from a balance position; and finally by using the lever principle, which allows fractional masses to be applied by movement of a small mass along the measuring arm of the beam. The standardization of the weights used – and ensuring traders used the correct weights – was a considerable preoccupation of governments throughout this time and inspections were held regularly. When the Weights and Measures Act was passed in Victoria in 1862 local inspectors were established throughout the colony to ensure accuracy particularly in the weighing of gold. By the 1870's each local council had a set of standards that were used to test the scales, weights and measures of local merchants and businesses.Set of small scales possibly from a travelling boxed set due to their small size, similar to those used in an apothecary and weighing gold. Scales have two round brass pans with a cross bar and chains and pointer central on the lever arm. At top of lever arm above pointer is a small leather tag from which to hold up the scales. city of greater bendigo commerce, making a nation exhibition, city of greater bendigo mining

The knitting needle gauge was used as a guide to the needle sizes used in Britain and Australia before metric measurements were adopted for weights and measures in the mid 1970's.A silver metal knitting needle gauge in the shape of a bell with different sized holes in the middle numbered from 1-5 and slots around both sides numbered from 6-22. These holes were used as a guide to gauge the size of knitting needles. The numbers and lettering have been engraved into the metal.KNITTING / PIN SIZE / IS WIDTH / OF SLOTShandcrafts, knitting, knitting gauge, george evans collection

This measure was effected for the legal protection of all members. Dated 17/5/1996. The Legacy Club of Melbourne was incorporated in 1996. This document captured the rules of the club at that time.For members, branches and groups engaged in "Club" activities (comradeship, non welfare members activities).White A4 Legacy letterhead, Legacy logo top left hand corner. White A4 x 15 pages of rules of the new incorporated entity.L/RF Crosbie in blue ink top right hand corner Copy of Certificate of Incorporation - the word assistant struck out.activities, membership, rules

Beatrice Eliza Dacomb died 12 Feb 1947 at her residence, 120 South Street, Sth Yarra, aged 83. Her parents were Eliza Evans and Edmund Dacomb; she was born 22 Nov 1863 in Portland. Her sister Clara Thurston Dacomb b 15 Oct 1867 Portland, Victoria; died 19 Oct 1946 aged 79 years at her residence, 120 South Street, Sth Yarra. Their mother Eliza died aged 47 years in 1875; parents = Thomas Evans and Frances Thurston. Their father Edmund Dacomb was a merchant; both parents born in England. They were the 6th and 8th children in the family. Other siblings: Geoffrey (b1860; died Box Hill 1936 aged 76 years), Walter Alfred (b 1857; died Qld 20 Jul 1936), Annie Frances (b. 1862; died Lilydale 1901 aged 39 years), Lydia Harrt (b. 1855; died Balwyn 1925 ged 70 years), Leonard (b. 1866; died 1872 aged 6 years), Emily Maud (b. 1869; died 1874 aged 5 years). Clare and Beatrice Dacomb lived at 4 Wilson Street, Surrey Hills from 1909-1918. (1903 also Margaret Thomas Dacomb) Originally teachers of the Pitman method of shorthand, they invented the Dacomb method which was originally called Web Speed. In 1933 the method was trialled at Coburg High School and found to have a far superior skill uptake to Pitman. Its simplicity made it particularly useful in South America, Tonga and other Pacific Island countries. Their book 'Web speed-quick shorthand' was published in 1922. Their method lost currency after 1975 when a simplified form of Pitman was adopted by high schools and colleges of advanced education. This image is thought to be Clara.Black and white photocopy of a head ad shoulders portrait of a well-dressed middle-aged woman idetified as either Clara or Beatrice Dacomb.Black and white photocopy measuring W 11.2 cm x H 16.3 cm. Photocopy was taken from a framed photo.wilson street, dacomb school of shorthand, melbourne dacomb college, secretarial services, miss clara dacomb, miss beatrice dacomb, george a h lang's business college

Beatrice Eliza Dacomb died 12 Feb 1947 at her residence, 120 South Street, Sth Yarra, aged 83. Her parents were Eliza Evans and Edmund Dacomb; she was born 22 Nov 1863 in Portland. Her sister Clara Thurston Dacomb b 15 Oct 1867 Portland, Victoria; died 19 Oct 1946 aged 79 years at her residence, 120 South Street, Sth Yarra. Their mother Eliza died aged 47 years in 1875; parents = Thomas Evans and Frances Thurston. Their father Edmund Dacomb was a merchant; both parents born in England. They were the 6th and 8th children in the family. Other siblings: Geoffrey (b1860; died Box Hill 1936 aged 76 years), Walter Alfred (b 1857; died Qld 20 Jul 1936), Annie Frances (b. 1862; died Lilydale 1901 aged 39 years), Lydia Harrt (b. 1855; died Balwyn 1925 ged 70 years), Leonard (b. 1866; died 1872 aged 6 years), Emily Maud (b. 1869; died 1874 aged 5 years). Clare and Beatrice Dacomb lived at 4 Wilson Street, Surrey Hills from 1909-1918. (1903 also Margaret Thomas Dacomb) Originally teachers of the Pitman method of shorthand, they invented the Dacomb method which was originally called Web Speed. In 1933 the method was trialled at Coburg High School and found to have a far superior skill uptake to Pitman. Its simplicity made it particularly useful in South America, Tonga and other Pacific Island countries. Their book 'Web speed-quick shorthand' was published in 1922. Their method lost currency after 1975 when a simplified form of Pitman was adopted by high schools and colleges of advanced education. This image is thought to be Beatrice.Black and white photocopy of a head ad shoulders portrait of a well-dressed middle-aged woman idetified as either Clara or Beatrice Dacomb.Black and white photocopy measuring W 11.2 cm x H 16.3 cm. Photocopy was taken from a framed photo.wilson street, dacomb school of shorthand, melbourne dacomb college, secretarial services, miss beatrice dacomb, miss clara dacomb, george a h lang's business college

Rocket equipment which has been used in various lifeboat and rocket stations on the Victorian Coast. It is unclear if this is the original rocket equipment from Port Campbell. This equipment, if not original has been used in rescue operations and is identical to the equipment that has been in use at Port Campbell from C.1890 onwards.Metal, brass and timber tripod structure with a channel or trough to support the rocket. It has a pendulum and dial to measure the height trajectory. Very long wooden box with hinged lid painted a green-grey colour with four brass hinges and two rusted metal hooks.

A reference guide of 32 pages plus cardboard covers. The volume has wire spiral binding. It includes a perpetual calendar. Other pages include tables, charts, dates, mathematical information and useful information for farmers including weights and measures and animal gestation periods.A ready reckoner including a wide range of information to facilitate everyday calculations prior to the widespread use of electrical calculators and devices. Published post 1945, the booklet also includes a chronology of World War 11 as well as a list of household antidotes in cases of poisoning.ready reckoner, calendars

Theodolites have been used to measure horizontal and vertical angles by surveyors since the 1500s. A theodolite is a precision instrument for measuring angles in the horizontal and vertical planes. Theodolites are used mainly for surveying applications, and have been adapted for specialized purposes in fields like meteorology and rocket launch technology. Theodolites, such as this one, were instrumental to early surveyors, and would have played a significant part in their everyday work. The plumb bob was used to set the instrument exactly over a fixed survey marker.This theodolite was made by Troughton and Simms, who were significant scientific instrument makers of the 19th century and early 20th century. In 1782 John Troughton purchased Benjamin Cole's shop in Fleet Street, London enabling him to sell his own signed products. His instrument making business supported several dynasties of Troughtons before becoming Troughton and Simms and later still Cooke Troughton & Simms. This firm was one of the most well respected firms of instrument makers of the 1800s. A grey metal theodolite - probably made of brass. It has movable parts and there is a weight ( a plumb bob) attached with string.Cooke Troughton & Simms Yorke England V012318 Supplied by A. E. Parsons Melbournetheodolite scientific-instruments surveying

A young motorist stung $322 for driving over a painted traffic island on Greensborough Highway in Watsonia is demanding the fine be overturned after VicRoads removed the "confusing" safety measure.News article 1 page, black text.vicroads, watsonia, motorist fined, greensborough highway

A wooden device that appears to have been used in a workshop. This device has a rotating pointer, hence it may have been used for balancing, measuring or alignment at the RVIB workshop.1 wooden board with metal attachmentassistive devices, royal victorian institute for the blind

The author, Bennett H. Brough was an associate of theRoyal School of Mines, a member of the COuncil of the Institution of Mining Engineers, a fellow of the geological society and of the Institute of Chemistry, a member of the Mining Institute of Cornwall, and a former instructor of mine-surveying at the Royal School of MinesRed had covered book 372 pages - part of Griffin's Mining Series. Contents include general explanatinos of surveying, an historical sketch, mineral deposits, mining terms, measures of length, measurement distances, the chain, rods, steel bands, measuring wheel, Miner's Dial, Magnetic needle, Fixed needle, German Dial, theodolite, traversing underground. Surface-surveys. plotting the survey, calculation of area, leveling, Telescope, Setting out, Mine-Surveying Problems, Mine Plans, Photographic Surveying, examination Surveying. Illustrations include: Whitelaw's Dial (Fig 22), Theodolite of the American Type with Hoffman tripod head, (fig 37a)mining, surveying, miner's dial, chain, survey, theodolite, scientific instruments

This pump was situated at Mildura Victoria and pumped water from the Murray river to irrigate the fruit blocks.Large double suction centrifugal pump with 36" suction and discharge branches weighing 7500 kg. Cast iron baseplate for the pump measuring 154 x 185 x 22 cm. The pump is fitted with a spring grid coupling. The pump and baseplate are painted pale blue. The pump identification plate has been removed and there are no markings cast on it. The baseplate has Thompsons cast in relief on the top surface. The coupling has a brass nameplate with Richardson Spring Grid Coupling engraved on it.machinery - pumps; metalwork

Date is approximate. Electric trains replaced steam locomotives in 1922. Mr William Holmes of 'Lugano', Mont Albert Road was in charge of the design and introduction of the electrification of the Melbourne rail system.Black and white photo of an early electric train approaching the platform at Mont Albert station. A couple of spindly eucalyptus trees can be seen beyond the picket fence marking the boundary of the platform.Black and white photo mounted on card; measures 16.3 cm x 23.4 cm.mont albert station, railways, trains, norman carter

This sextant is very similar to a 1915 Sextant design. A sextant is an astronomical instrument used in measuring angular distances especially the altitudes of sun, moon and starts at sea determining latitude and longitude.This sextant is an example of a 19th-century marine instrument used for finding location at sea. It was made by London scientific instrument maker Troughton and Simms, which originated in 1826 and continued until 1922.Sextant and its fitted square wooden box. The handle of the sextant is carved with a cross-hatched pattern. Made by Troughton and Simms, London.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, sextant, navigational instrument, marine navigation, marine equipment, instrument, navigation, troughton and simms, london, scientific instrument

Two letters dating from 1943 from the Anama Pastoral Co. Ltd, Central Bungaree, Brinkworth, South Australia, to W.R. Lang re: wool testing and measuring service.wool - testing world war ii, anama pastoral co., ltd, lang, dr w. roy, wool - testing, world war ii

A set of Avery scales, made in England for measuring up to 2 pounds of weight. On display in the reception foyer on Level 1 sitting on the desk made by Perc Markham for Stan Savige.Was collected before the archive began. Unknown origin but must have been important to an early legatee.Bronze coloured metal scales with a round dish and an irregular shaped dish.Imprinted with 'Avery' and 'To weigh 2LB. Made in England' on the base.scales, weights

The peck has been in use since the early 14th century when it was introduced as a measure for flour. The term referred to varying quantities until the modern units of measurement were defined in the 19th century. Cities in England used to have official standard weights and measures for that city or area. These containers were marked with the city's name and emblem, merchant’s weights and measures would then be checked against this to make sure they weren't trying to cheat their customers. The item in the collection is a standard measure approved by Bristol City and used by that City’s grocers to measure dry goods such as peas, beans, sugar, flour, meal etc., and its metal banding ensures that the measure cannot be reduced in size to cheat customers. Additional Information: The British Imperial System evolved from the thousands of Roman, Celtic, Anglo-Saxon, and customary local units employed in the middle Ages. Traditional names such as pound, foot, and gallon were widely used, but the values so designated varied with time, place, trade, product specifications, and dozens of other requirements. Early royal standards were established to enforce uniformity took the name Winchester, after the ancient tenth century capital of Britain. King Henry VII reaffirmed the customary Winchester standards for capacity and length and distributed royal standards throughout the realm. This process was repeated about a century later in the reign of Queen Elizabeth I. In the 16th century, the rod (5.5 yards, or 16.5 feet) was defined (once again as a learning device and not as a standard) defined by the length of the left feet of 16 men lined up heel to toe as they emerged from the church. By the 17th century usage and legal statute had established the acre, rod, and furlong at their present values together with other historic units such as the peck. Establishment of the System: The Weights and Measures Act of 1824 and the Act of 1878 established the British Imperial System based on precise definitions of selected existing units. The 1824 act sanctioned a single imperial gallon to replace the wine, ale, and corn (wheat) gallons that were in general use. The new gallon was defined as equal in volume to 10 pounds avoirdupois of distilled water weighed at 62°F with the barometer at 30 inches, or 277.274 cubic inches (later corrected to 277.421 cubic inches). The two new basic standard units were the imperial standard yard and the troy pound, which was later restricted to weighing drugs, precious metals, and jewels. In 1963 an act of parliament abolished archaic measures as the rod and chaldron and a metric system was adopted. An early example of a dry measuring container giving a snapshot of how imperial weights and measures developed in England to evolve the British measurement system into the metric arrangement that most countries have adopted today including Australia. It has social significance as an item that was in everyday use by grocers and other merchants to measure dry goods in the late 18th to early 19th centuries and used specifically in the Bristol region of England as an officially recognised measurement.Wooden measurement container with iron banding and hand made rivets container is a Quarter Peck official measurement container. Inscriptions are impressed into the sides of the wooden body. The container has the official crown and emblem of the City of Bristol, indicating this item was the Bristol City standard quarter peck measurement.Impressed into the timber on the front, a crown emblem over "C B G / CITY OF BRISTOL / QUARTER", on one side "HALF" , another side "PECK". Handwritten in white chalk on the base is "1458"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill-maritime-museum, flagstaff-hill-maritime-village, weights and measures, quarter peck, measurement container, dry grocery measure, bristol city measurement standard, city of bristol, british weights and measures, 18th and 19th centure standard measures

A fob watch is an instrument for measuring time. It is designed to hang from a chain that is attached to a wearer's waistband or waistcoat. The chain keeps the fob watch from being dropped or falling out of a pocket. A person possessing a fob watch or similar instrument in the 18th century would be viewed as someone in a good financial position and often a position of power or respect. It was a social statement as well as a useful object.Silver pocket watch and brass iron winder. Watch has Roman numerals on face and gold flower, floral and diamond shaped motif. Marked "0.800 x/5 115/15 39443" Picture of a bird, flying, griping a painter's pallet and brushes and another separate picture of a bird. There is also a floral pattern on the back of the watch. The winder has a number "6" or "9" on one face and a symbol similar to the "Star of David" on the other.Marked "0.800 x/5 115/15 39443" . The winder has a number "6" or "9" on one face and a symbol similar to the "Star of David" on the other.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, pocket watch, watch, horology, time keeper, fashion accessory

This planimeter in leather box was used by P. J. Larkin, government surveyor, for measuring irregular areas in plans and charts. This type of instrument is still used today and is useful for computing dredging volumes.Surveyor active in the 20s and 30s in Port Phillip and QuennscliffA Planimeter in its own leather box.The Adams Engineering Co. Wellington N.Z. No 8747surveying instruments, p j larkin

Kodak home developing and printing kit with booklet; black and yellow plastic carry case; 2 x developers; printing masks; photo-flo (liquid); Acid fixing powder; wood and glass frame; glass measuring cup; photographic thermometer; 'dark' light in a metal case."Kodak (Australasia) Pty Ltd Melbourne, Australia"photographic processing equipment, photographic chemicals, darkroom lamps

A sextant is an astronomical instrument used to determine latitude and longitude at sea by measuring angular distances, especially the altitudes of the sun, moon, and stars. It is a doubly reflecting navigation instrument and used mainly by sailors to measure the angular distance between two visible objects. The name comes from the Latin sextans, or “sixth part of a unit,” because the sextant’s arc can be 60° or 120° of a circle depending on the model used. The primary use was to measure the angle between an astronomical object and the horizon for the purposes of celestial navigation. The estimation of this angle is known as sighting or shooting the object, or taking a sight. This angle and the time when it was measured is used in order to determine Greenwich Mean Time and hence longitude. Sighting the height of a landmark on land can also give a measure of distance from that object. History: The development of the sextant was as an improvement over the octant, an instrument designed to measure one's latitude. The octant was first implemented around 1731-present but can only measure angles up to 45°. As larger angles were needed to allow the measurement of lunar objects - moon, stars and the sun - at higher angles, the octant was superseded by the sextant. The sextant is a similar instrument but better made and allows larger angles from 60° to 120°. This improvement allows distances to be accurately calculated thereby giving longitude when used with a chronometer. The sextant was derived from the octant in 1757, eventually making all previous instruments used for navigational positioning obsolete. The sextant had been attributed to by John Hadley (1682–1744) and Thomas Godfrey (1704–1749), but reference to the sextant was also found later in the unpublished writings of Isaac Newton (1643–1727). Earlier links can be found to Bartholomew Gosnold (1571–1607) indicating that the use of a sextant for nautical navigation predates Hadley's implementation. In 1922, the sextant was modified for aeronautical navigation by Portuguese navigator and naval officer Gago Coutinho. It should be noted that the octant and quadrant are in the same family as they were, and all are, regarded as sextants. The sextant is representative of it's type and although not fully complete it demonstrates how 18th,19th and 20th century mariners determined their latitude and longitudinal to determine their position on a chart, allowing them to navigate there way across the world's oceans. It also demonstrates the skill and workmanship of the early instrument makers that operated scientific instrument businesses from London and other areas of England to provide most of the navigational instrumentation used by commercial and military navies of the time.Sextant with square, fitted box of polished wood, "Hezzanith" brand. Box contains many parts for the sextants use. On certificate "Heath & Co, London. Sextant Number Y 822". Catch on lid "DEFIANT LEVER" and "PATENT NUMBER 187.10". Maker's certificate is attached to the inside of the box.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, sextant box, sextant, hezzanith, heath & co, navigational instrument, george wilson heath, astronomical instrument, instrument manufacturers, scientific instrument, navigation, celestial navigation, octant, quadrant, lunar navigation

The tin was designed and used by the Colonial Sugar Refining Co. to store and sell golden syrup which is a by-product of cane sugar, molasses and treacle. The tin was used after the introduction of metric weights and measures.A yellow, red, brown, white and black tin used to sell and store golden syrup. The kilogram tin has the words 'golden syrup' printed in large red letters. There is a recipe and picture for caramel sauce on the back of the tin.MADE FROM AUSTRALIAN GROWN SUGAR CANE / CSR / Golden / Syrup / Net 1 kg / The COLONIAL SUGAR REFINING CO LTD / MELBOURNEcolonial sugar refining co., golden syrup, sugar cane, food, recipes, sugar mills, canning, george evans collection, commercial packaging