Map, Underground Survey of Mines, Bendigo, New Chum Railway Co, New Chum Line.A.S.Whitelawmap, bendigo, new chum railway co.

Robin Boyd developed a close friendship with the founder of the Bauhaus in Weimar Germany, Walter Gropius, who had moved to the USA in the 1930s. Through this connection, Boyd was invited to be the Massachusetts Institute of Technology (MIT) Bemis Professor at the School in the North American academic year 1956-7. Robin and Patricia Boyd, with their youngest daughter Suzy, were based in Cambridge, Massachusetts for the year. Boyd gave some lectures at MIT and he was also invited to give lectures at many other universities, allowing him to travel widely within the USA, especially on the East Coast. This gave him the opportunity to meet architects like Frank Lloyd Wright, Eero Saarinen, Paul Rudolph and many others, and visit the offices of Skidmore, Owings and Merrill, and places like Taliesin and the General Motors Technical Center Detroit. On the way home, the Boyds visited London, Berlin, Paris and Le Corbusier’s Ronchamp Chapel in France.Colour slide in a mount. New York skyline with Empire State building, New York, USAMade in USA / Inscribed 31 / 37 (Handwritten)mit bemis professorship, mit, robin boyd, slide

Colour slide in a mount. Street scene New York, East 73rd Street, New YorkMade in Australia / 2 / JUN 67M6slide, robin boyd

Robin Boyd developed a close friendship with the founder of the Bauhaus in Weimar Germany, Walter Gropius, who had moved to the USA in the 1930s. Through this connection, Boyd was invited to be the Massachusetts Institute of Technology (MIT) Bemis Professor at the School in the North American academic year 1956-7. Robin and Patricia Boyd, with their youngest daughter Suzy, were based in Cambridge, Massachusetts for the year. Boyd gave some lectures at MIT and he was also invited to give lectures at many other universities, allowing him to travel widely within the USA, especially on the East Coast. This gave him the opportunity to meet architects like Frank Lloyd Wright, Eero Saarinen, Paul Rudolph and many others, and visit the offices of Skidmore, Owings and Merrill, and places like Taliesin and the General Motors Technical Center Detroit. On the way home, the Boyds visited London, Berlin, Paris and Le Corbusier’s Ronchamp Chapel in France.Colour slide in a mount. Housing, 5th Avenue, Harlem, New York, New York, USAMade in USA / Patented / 04819 / B (Handwritten) / Encircled 18F (Handwritten)mit bemis professorship, mit, robin boyd, slide

BHS CollectionGlossy Brochure introducing "Bendigo Bus" new routes. Map of the new routes and information hotline.history, bendigo, merle lummis collection, bendigo bus

20 slides labelled "New Lab" showing construction of the new laboratory. Mar and May 1990.construction, laboratory, 1990

Moulding Plane: A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. Auburn Tool Company: The Auburn Tool Company is known to exist from 1864 to 1893. George Casey reorganized the firm of Casey, Clark and Company as a joint-stock company in 1864, under the company name of Auburn Tool Company. The 1865 New York State Census noted the firm as a manufacturer of the plane, plane irons, and skates. The production that year was listed as 30,000 pairs of skates and 35,000 planes along with 25,000 dozen plane irons. The plane irons carried the trademark "Thistle". Both skates and plane irons were made from welded wrought iron and cast steel. The Auburn Tool Company was among the five leading plane manufacturing firms existing in the mid to late 19th century USA. Others were: H. Chapin's Son; Greenfield Tool Company; and Sandusky Tool Company. Auburn Tool Company, with these others, was also a founding member of the Plane Makers Association, organized around 1858 to fix prices. Most of the companies tools were manufactured by prisoners and in 1866 the firm was outbid for prison labour by J M Easterly and Co. After losing the contract with the prison authority they constructed a new building and continued in the plane manufacturing business with private labour. The 1870 US Census reported the firm had 21 machines, driven by water power, employing 66 males, producing annual products valued at us$70, 000. After A. Howland and Company was dissolved in 1874, the Auburn Tool Company again resumed using contract labour at the State Prison until 1877. The Auburn Tool Company merged with the Ohio Tool Company of Columbus, Ohio, on Nov 14, 1893. Although plane manufacturing was continued at Auburn until after 1907, after this merger the firm went under the name of the Ohio Tool Company. A significant item from the mid to late 19th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture was made predominately by hand and with tools that were themselves hand made shows the craftsmanship used to make such a unique item. It also gives an insight into how many manufacturing companies bid for the rights to use prison labour to make their products at this time in our history. Decorative wood Moulding, plane Round type Auburn New York. Owner A Neudt Size 14 flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Issue of periodical giving details of mural at Blackburn Branch Library, detailed description of Vermont South Branch Library, Australian Library Week, New writers at library and resources available at local libraries.Issue of periodical giving details of mural at Blackburn Branch Librarylibraries, whitehorse manningham regional library corporation, blackburn branch library, murals, vermont south branch library, australian library week

The 1/15 Royal New South Lancers and 8/13 Victorian Mounted Rifles were sister armoured corps regiments of the Citizen Military Forces, now Army Reserve, formed in 1948. Training and social contact between the regiments was frequent and gifts and presentations such as this plaque often occurred.representative of social interaction between regiemtns of the Citizen Military Forces.Wooden plaque with badge and motto of 1st/15th Royal New South Wales Lancers Regiment at centre. Also plastic presentation plate attached. To / OFFICERS 8/13 VMR / from / OFFICERS 1/15 RNSWL [and on reverse of plaque in ink] Received Sep 81military, plaque, lancers, tenax in fide, officer, mess

In the early stages of the Kiewa Hydro-Electric Scheme the State Electricity Commission took over the financial and construction responsibility of the Tawonga District General Hospital building at a cost of 27,000 pounds. This included the removal and re-erection of the ex-military Bonegilla ward from Wodonga while in addition they carried out all the necessary building works that allowed the hospital to operate as a functional unit. The work was completed and handed over to the Hospital Committee of Management on September 1, 1949. Local residents raised 3,400 pounds through fund raising. The balance was met by the SEC and the Hospital and Charities Commission. The initial project was to provide for a basic temporary hospital which was later to include an Operating Theatre, Offices, Store, Mortuary and a Nurse’s Home, until the establishment of a permanent medical premises. Following the opening, 455 patients were admitted to the Tawonga District General Hospital and 254 operations were performed in the first year. The hospital relocated to Mount Beauty in the former SEC administration offices located in the town centre. Official opening of the 18 bed Tawonga District General Hospital on April 29 in 1961. Kiewa Valley House nursing home was officially opened on March 6th, 1985, with a new lounge extension opening in May, 1993. Prior to this, residents had to travel to Beechworth, Wangaratta or Wodonga for care. The old weatherboard building was demolished around the late 1900’s to early 2000’s and replaced with a new modern brick building. Alpine Health CEO Mr Lyndon Seys oversaw the opening of the new Mount Beauty Hospital in November 2001 alongside Board of Management President Mr Andrew Randell, other board members and politicians.The Kiewa Hydro-Electric Scheme the State Electricity Commission played a pivotal part in the planning and initial funding of the Tawonga District General Hospital, with a view to providing medical support for its many workers on the Hydro scheme. Later, spouse and family members of workers were also able to access medical assistance. Many SEC workers and their families have received high medical care at Tawonga District General Hospital and Alpine Health and/or as residents of Kiewa Valley House over the years. A number of family members of SECV workers as well as other dedicated staff have provided high quality medical attention and support in all three facilities as nursing staff, support staff and volunteers. Many past staff members and their families still remain living in the Kiewa Valley area Set of 13 colour photographs of past nursing staff and support staff from Tawonga District General Hospital, Kiewa Valley House & Alpine Health 1. Marg Hickey, Barbara Clark & Margaret Ranton 2. Cheryl Clutterbuck & Rosemary Forrest 3. Margaret Ranton 4. Margaret Ranton holding unknown infant 5. Gwen Goss 6. Barbara Clark & Margaret Ranton 7. Margaret Ranton, Sue Zeinert & Jenny Piera 8. Margaret Ranton, Gloria Ryder & Jenny Piera 9. Sue Wesley, Ruth Barton, Margaret Ranton, Rosemary Forrest & Nola Henry 10. F Bogaski & H Sigmund 11. Maintenance Supervisor H Sigmund 12. Gardener Fred Keat & Handyman Joe Trezise (1977) 13. Nursing staff in new hospital 1-9 No markings 10 F Bogaski & H Sigmund 11. Maintenance Supervisor H Sigmund 12. Gardener Fred Keat & Handyman Joe Trezise (1977) 13. Nursing staff in new hospital tawonga district general hospital, kiewa valley house, alpine health

The bridge over Wodonga Creek was opened on Friday 20th October 1922 by the Minister For Public Works Mr Frank. The erection of the bridge was carried out by Mr L Carr, of Brighton. The new concrete bridge was a little more than 500 feet long and consisted of 12 spans. The decking was supported by a number of steel girders, each weighing approximately seven tons. The whole bridge was supported by rows of three cylinders, sunk to a depth of 26ft below the summer water level. The original estimated cost of the structure was £20,000, but with the extras added during construction this amount was exceeded.These photos are significant because the capture the construction of an important bridge between Albury and Wodonga.Three black and white photographs taken during the construction of the new bridge over the Wodonga Creek in 1920.wodonga bridges, wodonga creek

Wooden Plaque 15cm x 13cmNew Zealand WRAC

The item belonged to Quentin Clifford BINKS, V245016 & VX114178 2nd AIF. Refer Cat No 1835 for his service history.Made from brass components depicting a V S Lighting on a stand to make an ashtray. The base is either from a 7mm or 3" shell and the stand and plane from .303 rounds. Wings & tail are made of brass.“New Guinea 1943”personal effects, smoking accessories, transport aviation, models

Item is a type of Trench ArtPickled onion fork with two pronges made from perspex. Fork is engraved on one side. “New Guinea 1943”memorabilia, trench art, new guinea

Organ donated to the Cowes Kindergarten by McIlwraith Ancestors, then given PIDHSOrgan from McIlwraith home, Rhyll. Wooden, fret work in front, coloured cherubs and panels, rest for candle or light on left side top, beading below keyboard.Waters, New Yorklocal history, musical instruments, keyboard, organ, mcilwraith family, rhyll, phillip island

B & W photograph of Rev Colin Knox sitting in an armchairNew Spectator identification knox, colin, uniting church minister

THE KIWI NEW ZEALANDnew zealand

THE KIWI NEW ZEALANDnew zealand

THE KIWI NEW ZEALANDnew zealand

NEW ZEALAND Tikinew zealand

Black and white photograph of a crowd of men, women and children posed outside a brick building."New Shire hall".buildings, grenville shire council, shire offices linton, events

Coloured photographPhotograph shows construction of new clubrooms of new Bowls Club at Laughnan Road.

Coloured photographPhotograph shows construction of new clubrooms of new Bowls Club at Laughnan Road.

Coloured photographPhotograph shows construction of new clubrooms of new Bowls Club at Laughnan Road.

This demijohn was made for Sharpe Bros., brewers of non- alcoholic drinks such as Dandelion Ale, ginger beer and cordial. Sharpe Bros began in New Zealand and expanded to Australia in the early 20th century. The company was taken over by Cadbury Schweppes in 1972. The likely manufacturer of this demijohn was Hoffman's Pottery of Brunswick.This item was recovered from the abandoned barn of the Pope family in 1971, when the property was sold to the Shire of Diamond Valley. This barn was located on the northern side of Pope Place and sketched by Ron Reynolds for the book "Greensborough and Greenhills".Glazed stoneware jar with dark brown glaze to top, narrow threaded neck with wire handle. Stopper missing.Transfer text on front: "This jar is the absolute property of and must be returned to Sharpe Bros. Australia and New Zealand"sharpe bros., hoffman pottery, stoneware jars

This demijohn was made for Sharpe Bros., brewers of non- alcoholic drinks such as Dandelion Ale, ginger beer and cordial. Sharpe Bros began in New Zealand and expanded to Australia in the early 20th century. The company was taken over by Cadbury Schweppes in 1972. The likely manufacturer of this demijohn was Hoffman's Pottery of Brunswick.Glazed stoneware jar with dark brown glaze to top, narrow threaded neck, wire handle and stopper missing.Transfer text on front: "This jar is the absolute property of and must be returned to Sharpe Bros. Australia and New Zealand"sharpe bros., hoffman pottery, stoneware jars

Further development of 9 shop sites took place along Whitehorse Road (later street numbers 58 to 64 Whitehorse Road) between New Street and Olive Grove around 1950 - See Victorian Collections reference 5227.Single sided page with red and blue print advertising Olive Grove Estate business and residential allotments, including subdivision plan and summary of local services.Subdivision includes Whitehorse Road, New Street, and Olive Grove. Agent - F.V. Parker, Telephone 131, Ringwood.

Lithography is a method of printing, originally based on the immiscibility of oil and water. The printing is from a stone or a metal plate with a smooth surface. It was invented in 1796 by the German author and actor Alois Senefelder and was initially used for musical scores and maps. There were two sailing ships with the name Helen B Sterling a six masted vessel and an earlier four masted Helen B Stirling that is the subject of the lithograph depicting the rescue of the crew and passengers by the Australian light Cruiser Melbourne in a gale off three Kings islands 55 kilometres Northwest of Cape Reinga New Zealand. This Helen B Sterling was built as a four mast wooden auxiliary screw Schooner, known as a wind jammer of 1608 tons. The vessel was formally known as the “Tacoma” and owned by the Washington Shipping Corporation based in Seattle USA in 1917. This original Helen B Sterling was caught in this storm and eventually sunk after being abandoned by the crew. The second generation relatives of those who were passengers at the time of the foundering advise that the storm was more like a cyclone. The Zeehan and Dundas Herald reported on January 26th 1922 that the abandoned vessel was still afloat and drifting towards the New Zealand coast. The Kalgoorie Miner newspaper also had an article reporting that on the 7th Feb 1922 the crew, captain, first mate and their families after being heroically rescued by the crew of the Australian light Cruiser Melbourne were arriving in Sydney today aboard the steamer the “Maheno” from New Zealand.Lithograph appears to be by an unknown artist A M Duffield produced in 1924. It is significant in that it depicts the rescuing of the passengers and crew of the schooner “Helen B Stirling”. At the time this was a significant event that made most Australian and New Zealand papers because of the involvement of the Australian cruiser “Melbourne”.Lithograph framed of cruiser Melbourne rescuing crew from Helen B Stirling off New Zealand coast. By A.M. Duffield."Australian Cruiser Melbourne Rescuing crew of (undetermined text _ _) Schooner Helen B Sterling of (Halifax Nth Canada Tons 1343 in a gale in the Pacific Ocean" (this last potion of text is incorrect see note sec this document) Lithograph signed bottom right hand corner in black "A M Duffield Nov 19th 1924"warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, lithograph, a.m.duffield., helen b stirling, schooner, cape reinga new zealand, alois senefelder, cruiser melbourne, three kings islands

The first photograph was probably taken at a media event announcing the introduction of the Heidelberg Speedmaster printing press in late 1990. LTCOL Rene van den Tol was the CO of the Army Survey Regiment from 1989 to 1991. Partly obscured behind the CO was Mr Bruce Reid, who was the newly elected federal member for Bendigo. The media event was held in Wayzgoose Hall, Lithographic Squadron’s new purpose-built building constructed to house the Speedmaster printing press. This occasion is covered in more detail in page 143 of Valerie Lovejoy’s book 'Mapmakers of Fortuna – A history of the Army Survey Regiment’ ISBN: 0-646-42120-4. Refer to Item 6291.6P for more photos of the Open Day.This set of three photographs were taken at the commissioning ceremony of Wayzgoose Hall, the Army Survey Regiment’s new printing building and the Heidelberg Speedmaster Printing Press, at Fortuna Bendigo on Wednesday 27th June 1990. The black & white photographs were printed on photographic paper and are part of the Army Survey Regiment’s Collection. The photographs were scanned at 300 dpi. .1) - Photo, black & white, 1990. Commissioning Ceremony L to R: CO LTCOL Rene van den Tol, Commander 3rd Military District BRIG P. Davies AM ADC, WO2 Jeff Willey in background. .2) - Photo, black & white, 1990. L to R: CO LTCOL Rene van den Tol, Commander 3rd Military District BRIG P. Davies AM ADC with first printed topographic map – 8123 4 Mansfield 1:50 000. .3) - Photo, black & white, 1990. L to R: SGT Gary Kerr in background, Seligson Claire Printing Press Suppliers - Richard Rasmussen and Oliver Holliwell, Bob Martin, Director of Survey COL Don Swiney MBE, RA Svy COL CMDT COL John Hillier, Commander 3rd Military District BRIG P. Davies AM ADC, Bruce Reid Bendigo MHR..1P to .3P – Annotated on back of photos ‘Opening New Print Room BRIG Davies 27 Jun 90’. Personnel and civilians are identified.royal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr, litho