RAAF Uniform JumperStripes and Branch information

Manufactured to be worn on uniforms by the crews. See item 2596 for a nickel silver sample which was the type worn by tram crews. See also item 3777 for another example. Numbers held are: - 388, 390, 2868 (which appears to have been used), 3431, 5265, 5958, 6408. The depth of the badges vary from 15 to 20mm.Demonstrates a MMTB "gold" numeral badges for crews.Set of seven, gold-tone brass MMTB Numerals - Have two metal lugs fixed onto the rear to enable it to be fixed to a uniform. Some have the clips fitted to them. In the middle on the rear of two of the items is the manufacturer's name "STOKES" and "Melbourne" stamped into the badge. badges, cap badges, mmtb, uniforms, crews

The demonstration is being carried out in the bathroom at RDNS Headquarter, 452 St. Kilda Road, Melbourne. The Sisters are wearing their grey RDNS uniforms and red cardigans of that era. From the founding of the Melbourne District Nursing Society (MDNS) in 1885, known as Royal District Nursing Service (RDNS) from 1966, the rehabilitation of patients to insure they were able to live independently in their own homes was at the forefront of care given by their Trained nurses. As well as teaching and supervising the use of equipment, their Trained nurses taught them safe transfer techniques. These techniques were also taught to family members to enable them to care for their loved ones. RDNS at first held workshops given by a contracted private Physiotherapist before employing their own Physiotherapist in 1975 who taught staff the correct techniques, not only for safety of the patient, but to reduce physical strain on RDNS nursing staff and patient’s family members. When required the Physiotherapist accompanied the Sister on her visit to the patient in their home.staff to be trained in techniques by RDNS Physiotherapists.Black and white photograph showing a safety technique demonstration. Royal District Nursing Service (RDNS) Sister Liz Thomson, with her hair drawn back, is wearing a white gown over her uniform and is being transferred by Sister Betty McDonald, dark short curled hair. She has her arms extended supporting Sr. Thomson onto a bath seat. Sister Thomson has her left leg over the bath and the wooden bath seat can be seen positioned in the upper section of a white bath. Sister Joanne Wilkinson, who has short straight dark hair is on the right observing. Both Sr. McDonald and Sr. Wilkinson are wearing their RDNS uniforms of a dark cardigan over a grey frock. A white tiled wall with a strip of dark tiles is behind the bath.with metal piping attached to the right tiled wall and running to taps over the bath. A window is seen to the left of the tiled wall. Photographers stamp and Quote No. GW 8royal district nursing service, rdns, rdns education, equipment, liz thomson, betty mcdonald, joanne wilkinson

Miss Ethel Lynn nursed in England for a time in her later life. She did private nursing at Orbost Hospital until she had a fall and broke her hip -1950's.The Lynn family is well-known in the Orbost area. Ethel Lynn is believed to have been working at Bairnsdale in 1924. Two white linen collars to be worn on a nurse's uniform. A white linen belt to be worn with a nurse's uniform.E. LYNNnursing health lynn-ethel uniform-nursing

This measuring ruler was used in the planning and making of components for the ship model Sovereign of the Seas. It is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Jim’s family has donated the ship model “Sovereign of the Seas” and many tools, accessories and documents used in the making of this and other ship models have been donated to Flagstaff Hill Maritime Village. Ship model of HMS Sovereign of the Seas, scale model of 17th Century English war ship, was handmade and carved from plans, enclosed in airtight glass case. All components of that model, including even the smallest pulleys, were hand crafted using tools designed and made by Jim. Outstanding details include functional rigging and moving cannons. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the maker. This ruler made by instrument makers J Rabone and Sons of Birmingham, is connected with the hobby and skill of ship model making that has been crafted as a leisure activity for many generations. The hobby is often chosen by serving and retired mariners who appreciate the connection with maritime history. This ruler was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage. Ruler, folding, wooden with brass hinges. Maker J. Rabone & Sons, Birmingham. Model No. 1375. It is warranted to be made of Boxwood. Length is 24 inches, divided into 1/8th inches on one side and 1/16th inches on the other side. This ruler is part of a collection of tools and accessories once used by Jim Williams, maker of a series of ship models 1930-1955 including “HMS Sovereign of the Seas”.“J RABONE & SONS / BIRMINGHAM”, “WARAND BOXWOOD”, “NO 1375”flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, ship model sovereign of the seas, jim williams, james bernard williams, ship model hobby, ship model tools, ship model making equipment, ship model making accessories, measuring instrument, ruler, folding ruler, j rabone and sons of birmingham england, ruler model 1375, sovereign of the sea, ship model, hobby, ship model tool, english war ship, j rabone and sons

This gauge was used in the making of components for the ship model Sovereign of the Seas. It is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Jim’s family has donated the ship model “Sovereign of the Seas” and many tools, accessories and documents used in the making of this and other ship models have been donated to Flagstaff Hill Maritime Village. Ship model of HMS Sovereign of the Seas, scale model of 17th Century English war ship, was handmade and carved from plans, enclosed in airtight glass case. All components of that model, including even the smallest pulleys, were hand crafted using tools designed and made by Jim. Outstanding details include functional rigging and moving cannons. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the maker. This gauge is connected with the hobby and skill of ship model making that has been crafted as a leisure activity for many generations. The hobby is often chosen by serving and retired mariners who appreciate the connection with maritime history. This gauge was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage. Gauge; marking gauge, wooden. Wooden handle threaded through hole in wooden block, adjusted along the handle by tightening a wing-nut screw. The end of the handle has a pointed pin fitted for scoring a mark on the work surface to mark timber before cutting. This gauge is part of a collection of tools and accessories once used by Jim Williams, maker of a series of ship models 1930-1955 including “HMS Sovereign of the Seas”.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, jim williams, james bernard williams, ship model hobby, ship model tools, ship model making equipment, ship model making accessories, wood working tool, model making tool, drawing instrument, gauge, tool, sovereign of the sea, ship model, hobby, ship model tool

This image shows two of the 'Melbourne District Nursing Society After Care Home' Sisters who worked in the After Care section of the Society during the 1930s. The image was taken on the balcony of the After Care Home at 39 Victoria Parade, Collingwood. It depicts the style of uniforms worn by trained nurses (Sisters) in that era. The Society were pioneers in recognizing the need for premises where patients too ill to be in their own home, but not ill enough to go to hospital, was needed, and the Melbourne District Nursing Society (MDNS) built, then opened, the After-Care Home in 1926, (from 1934 called After-Care Hospital), for these patients, and patients from Melbourne Hospitals who required recuperation before returning to their home. Many children were nursed there, some long term during the Polio epidemic, and the Society employed two School Teachers. The Society now ran two divisions, the After-Care with its own nursing staff and the District division. The Society were the first in Melbourne, in early 1928, to recognize some patients leaving the After-Care, and many at home, needed further social care and they set up ‘Almoners’ from their committee to visit these patients and be intermediaries in getting them social assistance. It was late the following year before the first training of Almoners took place in Melbourne. In 1930 the Society employed a full time kindergarten teacher to visit poor children in their homes. That year the Society were pioneers in opening an Ante-Natal Clinic at the After-Care, setting a high standard with equipment, keeping records and providing leaflets with instructions in how to keep healthy during pregnancy, what complications to look for and what to do when labour commenced. In 1934 the Society were pioneers again when they opened the first Women’s Welfare Clinic in Melbourne giving advice on birth-control, at first attended by their own patients, but then accepting patients from public hospitals until their own clinics were opened. A trained Almoner was employed in 1934 but only stayed twelve months due to the amount of work required. Due to shortage of trained Almoners, a Social Service Officer was employed at the After-Care who successfully gained better housing from the Housing Commission for families living under unsuitable conditions. In the 1950s the Hospital and Charities Commission decided to take over the After-Care Hospital, so the Melbourne District Nursing Society and After-Care Hospital separated and the Melbourne District Nursing Service was formed, setting up Headquarters at 452 St. Kilda Road. With Royal patronage the name changed in 1966 to Royal District Nursing Service (RDNS).Digital image of two Sisters from the Melbourne District Nursing Society (MDNS) After-Care Home standing on the balcony of their building. The Sister on the left hand side is wearing a dark cape over her white uniform; she wears a white veil over her dark hair. The Sister on the right hand side is wearing a long white apron over her grey uniform which has white cuffs on the sleeves. She is wearing a white veil over her dark hair. They are leaning on the scrolled metal rail of the balcony which runs along the grey building; part of which can be seen behind them.mdns, melbourne district nursing society, after- care hospital, after-care home, rdns, royal district nursing service, nurses uniforms

Framed black and white photograph of three nurses in uniform visiting a soldier in bed in his pyjamas. One nurse holds Lt. Col rand and dressed in uniform with medals, one nurse holds Warrant Officer is in field uniform, third nurse is in dark field uniformRank badges on Nurses epaulettesphotograph, nurses - vietnam

The 8th/13th Victorian Mounted Rifles was raised as a regiment of the Royal Australian Armoured Corps on 1 May 1948 with Headquarters in Melbourne and squadrons in Sale, Benalla/Wangaratta and Albury. In 1955 Regimental Headquarters moved to Wangaratta and a second squadron was located at Albury. The Sale squadron transferred to 4th/19th Prince of Wales’s Light Horse. In 1977 8/13 VMR Regiment was reduced to an independent squadron A Squadron 8th/13th Victorian Mounted Rifles and in 1991 was linked with 4th/19th Prince of Wales’s Light Horse forming the VMR Squadron of that regiment.Unique collection of photographs showing the first years of an armoured regiment of the post-Second World War era Citizen Military Forces showing equipment, uniforms, training and social activity and some personalities.Black and white photograph of seven servicemen, 4 in AIF uniform, 1 in 8/13 VMR uniform,1 in RAN uniform and 1 in RAAF uniform. Part of a collection of photographs collected during the life of the regiment and passed to the Heritage Collection when it was formalised in the early 1980s." A. Veitch, K. Kothoff ( RAN ), Maurie Davis, Ian McKay, John Neale, John Larkin. Bill Purcell. "albury, anzac day, 8/13 vmr

The 8/13 VMR was raised in May 1948 and was a participant in the Anzac Day marches in the district from that day forward. The sailor is John Neale wearing his WWII RAN uniform; the airman is Jack Larkin wearing his WWII RAAF uniform. The soldier (as yet unknown) also had WWII service. The colour party commander is Lieutenant Ian (Kiltie) McKie; the flag bearer is Hal Slaney.Photograph of social and historic interest to the Albury community showing citizen soldiers including returned servicemen who had volunteered for the Citizen Military Forces in the period immediately following the Second World War. It signifies the return of citizen soldiers to Albury following the war.Two black and white photographs (one framed) of colour party drawn from 8th/13th Victorian Mounted Rifles Regiment at the Anzac Day march at Albury NSW 1951. Three members of the front rank are dressed in WWII uniforms representing Navy, Army and Air Force. The flag bearer is carrying a Union Jack. The party photographed forming up in Dean Street near the intersection with Spencer Street and later passing Albury landmark, Mates Corner in Dean Street.Panel at lower centre of frame: "ANZAC Day Albury 1951 / All services represented by serving members of 8/13 VMR"anzac day, albury, neale john, larkin j d jack, slaney hal, mckie, mate's corner

This wooden spokeshave was used in the making of ship model Sovereign of the Seas. It would have been used to shave and shape wood in a similar way that a plane would be used. Its name comes from its use for shaping curved objects such as wheel spokes, oars, paddles, chair legs and bows. It is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Jim’s family has donated the ship model “Sovereign of the Seas” and many tools, accessories and documents used in the making of this and other ship models have been donated to Flagstaff Hill Maritime Village. Ship model of HMS Sovereign of the Seas, scale model of 17th Century English war ship, was handmade and carved from plans, enclosed in airtight glass case. All components of that model, including even the smallest pulleys, were hand crafted using tools designed and made by Jim. Outstanding details include functional rigging and moving cannons. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the maker.This spokeshave is connected with the hobby and skill of ship model making that has been crafted as a leisure activity for many generations. The hobby is often chosen by serving and retired mariners who appreciate the connection with maritime history. This spokeshave was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage. Spokeshave; two-handled, medium coloured wood tool, slightly curved centre. The front has two blade screws protruding from it, the back has a flat ‘sole’ with removable brass blade attached by screws. This spokeshave is part of a collection of tools and accessories once used by Jim Williams, maker of a series of ship models 1930-1955 including “HMS Sovereign of the Seas”. (Illegible text is pressed into the top side of the spoke shave.)flagstaff hill, warrnambool, flagstaff hill maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, jim williams, james bernard williams, ship model hobby, ship model tools, ship model making equipment, ship model making accessories, spokeshave, spoke shave, sovereign of the sea, ship model, hobby, ship model tool, english war ship

Showcard property of Kodak (Australasia). Inside on the left side a pgoto of a couple walking on a beach and the words kodak Accessories. On the right photo of a woman looking at flowers and the words Kodak Cameras.business, retail, kodak

Photo dated 09/05/82 showing four children and a dog on a wodden structure in front of McArthurs shoes and accessories shop. Also in the photo a man holding a small child.place, mall, hargreaves mall, bendigo hargreaves mall, mcarthurs

10562 A used advertising flyer from William Dowel, motor accessory supplier Hargreaves Street, Bendigo; in the form of an ink blotter providing Seasons Greetings with calendar (year not specified).william dowell, blotter, motor accessories

Uniform used by Major Philip Ketch, Commanding Officer Creswick Volunteers (1883). Was on display for many years at Ballarat Ranger Barracks but at the families request returned to Creswick MuseumOnly known uniform on display of the Creswick (Ballarat) Volunteers.Creswick Volunteers Officer's Dress Tunic. Main body in black wool fabric with rounded red stand up collar and braid. Sleeves end with red wool pointed cuffs with braid. Braiding on main body of uniform. Froged with 5 rows of braid ending with netted button. On sleeve badge with crossed rifles year 1883 and above years 1880, 1881, & 1882. Leather belt across shoulder with whistle attached.volunteer uniform, creswick, philip ketch

This photograph is taken in the office at RDNS Heidelberg Centre, and the RDNS Educator, Sr. Gawith is showing RDNS Sisters the areas covered by Heidelberg Centre. Sr. Gawith is wearing the RDNS uniform of a grey frock and red cardigan and the other three Sisters are wearing the newer RDNS uniform of a blue/grey herringbone coat with a curved material RDNS insignia attached on the upper sleeve. From its inception as Melbourne District Nursing Society (MDNS), in 1885, their trained nurses worked in specific areas, 'districts'. Their first Trained nurse (Nurse) worked east and west, between Victoria Parade and Flinders Street and, north and south, between Spencer Street and Spring Street. When a second Nurse was employed they divided this area at Elizabeth Street so each Nurse could attend to patients in the same area giving continuity of care. As the Society expanded, becoming Melbourne District Nursing Service, then, with Royal patronage, Royal District Nursing Service (RDNS) many Centres were opened throughout the Melbourne Metropolitan area and outer suburbs. The District nurse's (Sisters) areas (districts) grew and were divided within Shire boundaries for e.g. Knox 1, Knox 2, Knox 3, Knox 4, within the area of the Shire of Knox. On the left of the black and white photograph is Royal District Nursing Service (RDNS) Sister (Sr) Mary Gawith, who has short dark curled hair. She is standing side-on and looking to the right as, with her extended left arm she is pointing her finger to an area on a large map attached to the wall. She is holding some white sheets of paper in her right hand. To her right and looking towards her are Sr. Daphne Geldard, who has short curled hair, is smiling, and has her hands clasped in front of her. On the right next to her, and partly hidden, is Sr. Bev. Armstrong who is smiling and has short straight blonde hair. In the front right of the photograph and partly hiding Sr. Armstrong is Sr. Elizabeth Francis, who has short dark curled hair and has her hands clasped in front of her. Sr. Gawith is wearing a grey uniform dress and dark cardigan. The other Sisters are wearing grey uniform coats with the RDNS insignia on the upper sleeve. Sr. Geldard is wearing below the knee black boots.Barry Sutton photographer's stamp, quote number KY 40, names of staff in the photograph.rdns, royal district nursing service, rdns district map, rdns uniform, rdns education, sister daphne geldard, sister elizabeth francis, sister bev armstrong, sister mary gawith

This uniform was worn by student nurses at the Hillcrest Psychiatric Hospital in Adelaide in the early 1970s. In 1964, Northfield Mental Hospital was renamed Hillcrest Hospital. .1) Mid pink waisted and darted uniform with a front pocket (with H H embroidered) on left breast and side pockets on skirt. Buttoned up the front, with three buttons on top and a placket with four hidden buttons on skirt. There is a hook and eye at the waist and a separate belt with two buttons and buttonholes. There is a collar and cuffed short sleeves, a back yoke and a center inverted pleat. .2) A lined (double layer) woollen royal blue cape with collar and neck tie and a hook and eye clasp.Embroidered on top pocket - H Hnursing, hillcrest hospital, student nurse uniform, nurse cape, costume, textiles, cape, uniform, hillcrest psychiatric hospital

Book presented to the Museum from Tatura RSL showing the work that went into creating the Tatura Water Tower Mural. The Water tower on the north side, depict a full size picture of Sir John Monash in uniform. The south side of the tower depicts a thread of poppies. Sir John was the engineer who designed the water tower which was opened in 1912. A letter from Tatura RSL is in the book.White hard covered book. Front has two pictures of a water tower. One has poppies on it and the other a man in Army uniform. Back cover has to picture of part of a building with Victory Hall on it and the Australian flag up a flag pole flying.tatura rsl, tatura water tower mural, sir john monash, water tower engineers

This uniform, consisting of 3 pairs of trousers and 1 jacket, was owned by Dr W.R. Angus. Due to the manufacturer's label saying the uniform was made in Glasgow, it is likely that Dr Angus acquired the uniform around the time of his studies in Edinburgh. His name on the uniform suggests that it was part of his usual clothing and it was most likely worn on his homeward passage to Australia in 1928, during which time he worked as a Ship's Surgeon on T.S.S. LARGS BAY.. This uniform was donated to Flagstaff Hill Maritime Village by the family of Doctor William Roy Angus, Surgeon and Oculist. It is part of the “W.R. Angus Collection” that includes historical medical equipment, surgical instruments and material once belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) as well as Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. ABOUT THE “W.R.ANGUS COLLECTION” Doctor William Roy Angus M.B., B.S., Adel., 1923, F.R.C.S. Edin.,1928 (also known as Dr Roy Angus) was born in Murrumbeena, Victoria in 1901 and lived until 1970. He qualified as a doctor in 1923 at University of Adelaide, was Resident Medical Officer at the Royal Adelaide Hospital in 1924 and for a period was house surgeon to Sir (then Mr.) Henry Simpson Newland. Dr Angus was briefly an Assistant to Dr Riddell of Kapunda, then commenced private practice at Curramulka, Yorke Peninsula, SA, where he was physician, surgeon and chemist. In 1926, he was appointed as new Medical Assistant to Dr Thomas Francis Ryan (T.F. Ryan, or Tom), in Nhill, Victoria, where his experiences included radiology and pharmacy. In 1927 he was Acting House Surgeon in Dr Tom Ryan’s absence. Dr Angus had become engaged to Gladys Forsyth and they decided he would take time to further his studies overseas in the UK in 1927. He studied at London University College Hospital and at Edinburgh Royal Infirmary and in 1928, was awarded FRCS (Fellow from the Royal College of Surgeons), Edinburgh. He worked his passage back to Australia as a Ship’s Surgeon on the on the Australian Commonwealth Line’s T.S.S. Largs Bay. Dr Angus married Gladys in 1929, in Ballarat. (They went on to have one son (Graham 1932, born in SA) and two daughters (Helen (died 12/07/1996) and Berenice (Berry), both born at Mira, Nhill ) Dr Angus was a ‘flying doctor’ for the A.I.M. (Australian Inland Ministry) Aerial Medical Service in 1928 . The organisation began in South Australia through the Presbyterian Church in that year, with its first station being in the remote town of Oodnadatta, where Dr Angus was stationed. He was locum tenens there on North-South Railway at 21 Mile Camp. He took up this ‘flying doctor’ position in response to a call from Dr John Flynn; the organisation was later known as the Flying Doctor Service, then the Royal Flying Doctor Service. A lot of his work during this time involved dental surgery also. Between 1928-1932 he was surgeon at the Curramulka Hospital, Yorke Peninsula, South Australia. In 1933 Dr Angus returned to Nhill where he’d previously worked as Medical Assistant and purchased a share of the Nelson Street practice and Mira hospital from Dr Les Middleton one of the Middleton Brothers, the current owners of what was once Dr Tom Ryan’s practice. Dr L Middleton was House Surgeon to the Nhill Hospital 1926-1933, when he resigned. [Dr Tom Ryan’s practice had originally belonged to his older brother Dr Edward Ryan, who came to Nhill in 1885. Dr Edward saw patients at his rooms, firstly in Victoria Street and in 1886 in Nelson Street, until 1901. The Nelson Street practice also had a 2 bed ward, called Mira Private Hospital ). Dr Edward Ryan was House Surgeon at the Nhill Hospital 1884-1902 . He also had occasions where he successfully performed veterinary surgery for the local farmers too. Dr Tom Ryan then purchased the practice from his brother in 1901. Both Dr Edward and Dr Tom Ryan work as surgeons included eye surgery. Dr Tom Ryan performed many of his operations in the Mira private hospital on his premises. He too was House Surgeon at the Nhill Hospital 1902-1926. Dr Tom Ryan had one of the only two pieces of radiology equipment in Victoria during his practicing years – The Royal Melbourne Hospital had the other one. Over the years Dr Tom Ryan gradually set up what was effectively a training school for country general-practitioner-surgeons. Each patient was carefully examined, including using the X-ray machine, and any surgery was discussed and planned with Dr Ryan’s assistants several days in advance. Dr Angus gained experience in using the X-ray machine there during his time as assistant to Dr Ryan. Dr Tom Ryan moved from Nhill in 1926. He became a Fellow of the Royal Australasian College of Surgeons in 1927, soon after its formation, a rare accolade for a doctor outside any of the major cities. He remained a bachelor and died suddenly on 7th Dec 1955, aged 91, at his home in Ararat. Scholarships and prizes are still awarded to medical students in the honour of Dr T.F. Ryan and his father, Dr Michael Ryan, and brother, John Patrick Ryan. ] When Dr Angus bought into the Nelson Street premises in Nhill he was also appointed as the Nhill Hospital’s Honorary House Surgeon 1933-1938. His practitioner’s plate from his Nhill surgery states “HOURS Daily, except Tuesdays, Fridays and Saturday afternoons, 9-10am, 2-4pm, 7-8pm. Sundays by appointment”. This plate is now mounted on the doorway to the Port Medical Office at Flagstaff Hill Maritime Village, Warrnambool. Dr Edward Ryan and Dr Tom Ryan had an extensive collection of historical medical equipment and materials spanning 1884-1926 and when Dr Angus took up practice in their old premises he obtained this collection, a large part of which is now on display at the Port Medical Office at Flagstaff Hill Maritime Village in Warrnambool. During his time in Nhill Dr Angus was involved in the merging of the Mira Hospital and Nhill Public Hospital into one public hospital and the property titles passed on to Nhill Hospital in 1939. In 1939 Dr Angus and his family moved to Warrnambool where he purchased “Birchwood,” the 1852 home and medical practice of Dr John Hunter Henderson, at 214 Koroit Street. (This property was sold in1965 to the State Government and is now the site of the Warrnambool Police Station. ). The Angus family was able to afford gardeners, cooks and maids; their home was a popular place for visiting dignitaries to stay whilst visiting Warrnambool. Dr Angus had his own silk worm farm at home in a Mulberry tree. His young daughter used his centrifuge for spinning the silk. Dr Angus was appointed on a part-time basis as Port Medical Officer (Health Officer) in Warrnambool and held this position until the 1940’s when the government no longer required the service of a Port Medical Officer in Warrnambool; he was thus Warrnambool’s last serving Port Medical Officer. (The duties of a Port Medical Officer were outlined by the Colonial Secretary on 21st June, 1839 under the terms of the Quarantine Act. Masters of immigrant ships arriving in port reported incidents of diseases, illness and death and the Port Medical Officer made a decision on whether the ship required Quarantine and for how long, in this way preventing contagious illness from spreading from new immigrants to the residents already in the colony.) Dr Angus was a member of the Australian Medical Association, for 35 years and surgeon at the Warrnambool Base Hospital 1939-1942, He served as a Surgeon Captain during WWII1942-45, in Ballarat, Victoria, and in Bonegilla, N.S.W., completing his service just before the end of the war due to suffering from a heart attack. During his convalescence he carved an intricate and ‘most artistic’ chess set from the material that dentures were made from. He then studied ophthalmology at the Royal Melbourne Eye and Ear Hospital and created cosmetically superior artificial eyes by pioneering using the intrascleral cartilage. Angus received accolades from the Ophthalmological Society of Australasia for this work. He returned to Warrnambool to commence practice as an ophthalmologist, pioneering in artificial eye improvements. He was Honorary Consultant Ophthalmologist to Warrnambool Base Hospital for 31 years. He made monthly visits to Portland as a visiting surgeon, to perform eye surgery. He represented the Victorian South-West subdivision of the Australian Medical Association as its secretary between 1949 and 1956 and as chairman from 1956 to 1958. In 1968 Dr Angus was elected member of Spain’s Barraquer Institute of Barcelona after his research work in Intrasclearal cartilage grafting, becoming one of the few Australian ophthalmologists to receive this honour, and in the following year presented his final paper on Living Intrasclearal Cartilage Implants at the Inaugural Meeting of the Australian College of Ophthalmologists in Melbourne In his personal life Dr Angus was a Presbyterian and treated Sunday as a Sabbath, a day of rest. He would visit 3 or 4 country patients on a Sunday, taking his children along ‘for the ride’ and to visit with him. Sunday evenings he would play the pianola and sing Scottish songs to his family. One of Dr Angus’ patients was Margaret MacKenzie, author of a book on local shipwrecks that she’d seen as an eye witness from the late 1880’s in Peterborough, Victoria. In the early 1950’s Dr Angus, painted a picture of a shipwreck for the cover jacket of Margaret’s book, Shipwrecks and More Shipwrecks. She was blind in later life and her daughter wrote the actual book for her. Dr Angus and his wife Gladys were very involved in Warrnambool’s society with a strong interest in civic affairs. Their interests included organisations such as Red Cross, Rostrum, Warrnambool and District Historical Society (founding members), Wine and Food Society, Steering Committee for Tertiary Education in Warrnambool, Local National Trust, Good Neighbour Council, Housing Commission Advisory Board, United Services Institute, Legion of Ex-Servicemen, Olympic Pool Committee, Food for Britain Organisation, Warrnambool Hospital, Anti-Cancer Council, Boys’ Club, Charitable Council, National Fitness Council and Air Raid Precautions Group. He was also a member of the Steam Preservation Society and derived much pleasure from a steam traction engine on his farm. He had an interest in people and the community He and his wife Gladys were both involved in the creation of Flagstaff Hill, including the layout of the gardens. After his death (28th March 1970) his family requested his practitioner’s plate, medical instruments and some personal belongings be displayed in the Port Medical Office surgery at Flagstaff Hill Maritime Village, and be called the “W. R. Angus Collection”. The W.R. Angus Collection is significant for still being located at the site it is connected with, Doctor Angus being the last Port Medical Officer in Warrnambool. The collection of medical instruments and other equipment is culturally significant, being an historical example of medicine from late 19th to mid-20th century. Dr Angus assisted Dr Tom Ryan, a pioneer in the use of X-rays and in ocular surgery. Trousers (3) white uniform with silver buttons, buttons inscribed "V.Falzon Malta". On inside - W R Angus, R Poore. Tailored in Glasgow, Scotland 1900s by Paislyo Ltd Glasgow. (said to be a Cadet naval officer's uniform)Inscribed on buttons "V.Falson Malta". Marked on fabric "W R Angus, R Poore" and "Paislyo Ltd Glasgow"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, uniform trousers, silver button trousers, v.falzon malta, w r angus, paislyo ltd

Research shows the person in photo is Chas Thomas CASSIDY No 3800 9th Reinforcements 22nd BN AIF. Enlisted 22.7.1915 aged 20. Embarked 8.2.1916. Returned to Australia 29.5.1919.Post card photo, sepia, showing a soldier in uniform. The uniform shows 2 x Empire Wounded Stripes.On rear original writing in blue pen: “FROM CHARLIE TO HIS LOVER GIRL MARY” On front written later: “CHARLES THOMAS CASSIDY”photograph, postcard, 22nd

Belonged to Colonel Otter.4 Military uniform shoulder Pips, with medals indicating Rank. Plus, miscellaneous Military uniform pocket Pips.Medals: some wiht a military Cross on them.military decorations

This burgundy coloured, portable electric belt sander is stored in its own heavy duty cardboard box. It was made in England and, according to the label on the lid of the box, it is a Portrix Sander-Polisher, all-electric, portable, sands wood metal and polishes. Its uses include decorating, carpentry and polishing. It has a complete with electric unit with flex. The price of 75/- (75 shillings) is printed on the label of the box. The model and the brand of the sander have been removed from the manufacturer’s information embossed on the side of the sander. The sander is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Jim’s family has donated the ship model “Sovereign of the Seas” and many tools, accessories and documents used in the making of this and other ship models have been donated to Flagstaff Hill Maritime Village. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the maker.This vintage Portrix sander-polisher represents tools used for the hobby and skill of ship model making that has been carried as a leisure activity out for generations. Ship model making was also a pastime for sailing crew, who often made a model of the ship in which they were sailing. This sander was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage.Belt sander, electric. Portable power tool, Portrix model Sander–Polisher, burgundy coloured body with swivelling, black electric cable, 250V 1 / 4 amp. For sanding wood and metal, and for polishing. (Stored in original box.) Made in England. Part of a collection of tools and accessories used by Mr. Jim Williams to build ship model of the “Sovereign of the Sea” and other models. c. 1930-1955. Moulded into body “ - - - SANDER –POLISHER / 1 / 4 amp. PRODUCT OF - - - MANUFACTURING CO. LTD. 50 CYCLES / MADE IN ENGLAND PAT. PEND. 200/250 volts A.C.” (the Brand and Manufacturer’s name have been removed)flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, portrix sander-polisher, portrix power tool, portrix belt sander, woodworking equipment, ship modelling equipment, jim williams, james bernard williams, ship model, hobby, ship model tool, sovereign of the seas, english war ship

This is a certificate issued by the Victorian Country Fire Authority to John Sizeland, a member of the Warrnambool Urban Fire Brigade. The date is 13th April 1977 and the certificate marked John (Jack) Sizeland’s retirement from the Warrnambool Fire Brigade after more than 37 years’ service (the certificate is exact – 37 and five-twelfths years). In our collection we have Jack Sizeland’s Fire Brigade uniform and accessories. This certificate is of interest because it documents the years of service of a Warrnambool identity, John Sizeland. This is a 1977 certificate issued by the Country Fire Authority to John Sizeland. It is a white sheet with a blue tinge around the edges. It has the emblem of the Country Fire Authority, the name of the Authority in a cream, yellow and black ornate setting and printing in black and yellow. There are three signatures (blue ink) on the certificate. Three signatures – P. Ea….., C. Howe, J. Allen warrnambool urban fire brigade, john sizeland, history of warrnambool

This Screw brand knife, made by Charles Taylors (Sheffield Tools) Ltd in England, was used in the making of components for the ship model Sovereign of the Seas. It is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Jim’s family has donated the ship model “Sovereign of the Seas” and many tools, accessories and documents used in the making of this and other ship models have been donated to Flagstaff Hill Maritime Village. Ship model of HMS Sovereign of the Seas, scale model of 17th Century English war ship, was handmade and carved from plans, enclosed in airtight glass case. All components of that model, including even the smallest pulleys, were hand crafted using tools designed and made by Jim. Outstanding details include functional rigging and moving cannons. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the maker. This knife is connected with the hobby and skill of ship model making that has been crafted as a leisure activity for many generations. The hobby is often chosen by serving and retired mariners who appreciate the connection with maritime history. This knife was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage. Modelling knife; metal blade set into a turned wooden handle. The blade has been deliberately shaped to a 45 degree angle. Label on the handle, ‘Screw’ brand, made by Charles Taylors (Sheffield Tools) Ltd. of England. It has a logo of a screw within an oval. This knife is part of a collection of tools and accessories once used by Jim Williams, maker of a series of ship models 1930-1955 including “HMS Sovereign of the Seas”. label “SCREW brand”, logo of a screw within an oval, “SUPERIOR QUALITY”, CHARLES TAYLORS” (“SHEFFIELD TOOLS LTD.)”, “ENGLAND”flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, jim williams, james bernard williams, ship model hobby, ship model tools, ship model making equipment, ship model making accessories, modelling knife, charles taylors (sheffield tools) ltd of england, screw brand knife, sovereign of the sea, ship model, hobby, ship model tool, tool

Khaki Army Dress Uniform.

Photo taken of William Moyle in England before embarking for France. Refer Cat No 1260.3 for his service history. Wiliam Moyle in uniform with rifle.Label at bottom: "Wiliam Moyle 28/11/1916"photography-photographs, frame accessories, moyle

Men in Uniform at Campsite - no dateWritten on back of photograph, "Standing left to right: 1. Peter Laurie, 2. Claude Parris, 3. ??. Kneeling left to right: 1. ??, Tom Parker, 3. Eric Rooney, 4. Geo Parker, 5. Reece Thomas"