Shirley Freckleton-Humphrey' mother's Riding HatBlack Riding Hat with large brim, grosgrain hatband - leather band and red satin lining,The Coronet Extra Quality Maurice Joseph 137 Swanson Street Melbourne hat, horse riding, costume

Handmade black lace and fabric flower bonnet. The flowers are edged in white. The lining is in black net.visiting, outing, dressed up

Cream pith helmets were part of the uniform worn by Melbourne District Nursing Society (MDNS) Trained nurses (Nurses) from the early 1900s when giving nursing care to the sick poor of Melbourne. When riding their bicycles the helmet was held on by a long white scarf tied under the Nurse's chin. From its earliest years when Melbourne District Nursing Society (MDNS) Trained nurses, known as 'Nurse' in those days, began to wear uniforms the chosen colour was grey, though the style changed throughout the years as fashions changed from the late 1800s through to the 1970s. The Nurses firstly wore long grey frocks and a white cap with a long white tail hanging from the centre back. When bicycles were introduced in 1903 the headgear changed to a cream pith helmet adorned with a red Maltese cross in the centre front. This was held on with a veil going over the hat and tied under the chin. Over the years there were complaints that the veils became wet in the rain and they asked for a change of uniform, but this did not happen until 1921. The Nurses complained their skirts became wet when riding their bicycles in the rain and asked, when raining, to be able to wear breeches and gaiters. This was granted provided they wore aprons when attending patients. It was not long before the uniform changed to a shorter length grey frock, red cardigan, grey coat and grey brimmed hat; later changed to a peaked grey hat. In 1966 MDNS were granted Royal patronage. Now as Royal District Nursing Service (RDNS), the uniform was redesigned and colour changed in 1971. By 1972 the Sisters were wearing the new winter uniform of a blue/grey skivvie under a V neck tunic style frock made of blue/grey herringbone winter material with the RDNS insignia on the upper left, and a beret of the same material. In summer the uniform became a royal blue V neck tunic style frock, with the RDNS insignia on the upper left, worn over a short sleeve white blouse. A royal blue peaked hat with the RDNS insignia in the centre front was worn at first and then only worn on official occasions. This uniform was worn until changed to a corporate style in the mid 1980s,This hard cream coloured pith helmet has a 'pudding basin' shaped crown with 2 eyelets on both sides of it and a raised 'button' in the centre of the crown. This is encircled by a slightly sloping brim. A red cotton Maltese cross is emblazoned in the centre. The crown has a 66 cm circumference and is 12 cm deep; the raised central button is 3.5 cm x 3 cm; and the brim has a 101 cm circumference and is 5 cm deep.melbourne district nursing society, mdns, mdns uniforms, rdns, royal district nursing service

This hat is part of the uniform worn by all the Trained nurses (Sisters) of the Melbourne District Nursing Service, (MDNS), during the 1960s. The Sisters travelled around the inner and outer suburbs of Melbourne administering nursing care to patients in their homes. From its earliest years when Melbourne District Nursing Society (MDNS) began to wear uniforms the chosen colour was grey, though the style changed throughout the years as fashions changed from the late 1800s through to the 1970s. The Trained nurses firstly wore long grey frocks and a white cap with a long white tail hanging from the centre back. When bicycles were introduced the headgear changed to a white pith helmet adorned with a red Maltese cross in the centre front. This was held on with a veil going over the hat and tied under the chin. Over the years there were complaints that the veils became wet in the rain and they asked for a change of uniform, but this did not happen until 1921. The nurses complained their skirts became wet when riding their bicycles in the rain and asked, when raining, to be able to wear breeches and gaiters. This was granted provided they wore aprons when attending patients. It was not long before the uniform changed to a shorter length grey frock, red cardigan, grey coat and grey brimmed hat; later changed to a peaked grey hat. In 1966 MDNS were granted Royal patronage. Now as Royal District Nursing Service, RDNS, the uniform was redesigned and colour changed in 1971. By 1972 the Sisters were wearing the new winter uniform of a blue/grey skivvie under a V neck tunic style frock made of blue/grey herringbone winter material with the RDNS insignia on the upper left, and a beret of the same material. In summer the uniform became a royal blue V neck tunic style frock, with the RDNS insignia on the upper left, worn over a short sleeve white blouse. A royal blue peaked hat with the RDNS insignia in the centre front was worn at first and then only worn on official occasions. This uniform was worn until changed to a corporate style in the mid 1980s,A Melbourne District Nursing Service (MDNS) felt grey peaked hat, which has a deep crown and a flat top. Stitching comes from four corners of the crown at an angle to a grey band, which contains several rows of stitching, and surrounds the crown.. A stiff sloping grey brim, containing several rows of stitching, joins the band surrounding the crown, the rear of the brim is turned up and the front forms a peak. A cotton red Maltese cross is sewn to the centre front of the crown and band. A white with blue 'created by Effie Joy' label is attached to the inner hat band along with 'Size 22'. The crown is 9.5 cm deep and the brim is 5 cm deepmdns, melbourne district nursing service, mdns uniforms, rdns, royal district nursing service

Used by German Soldiers to protect against chemical weaponsWW1 German Gas Mask made of Tan rubberised canvas, with metal canister and cellophane eyes. Elesick staps for the wearer to fit to hear and a long cotton strap to wear around neck when mask is not in use. mask has folded in and set in place due to decay3379 2 printed inside chin paddingww1, german, gas mask

The Mk 6 was issued to the British military in 1986.[3] They were known to be used in Operation Desert Storm and Desert Shield.[4] From 1992, the Mk 6 was supplied to the UN alongside the M88, MICH and the M1 to allow for protection of peacekeeping forces. Many military forces used these helmets such as Argentina, Mexico, and most listed UN countries as stated. These were either covered with the respective country's camouflage helmet cover, or issued with a blue Mk 6 cover to indicate it as a peacekeeping helmet.[5] From June 2009, the helmet was replaced by the Mk 7 helmet.British Army combat helmet mk 6 made of ballistic nylon, painted olive green. It has a foam and leather liner and an olve green webbing harness to secure the helmet to the soldiers head. "Becca" is written in sharpie on the inside rear right of the helmet forward of the manufactures sizing and serial tag.

Blue colour RAAF Beret

Metal Brodie hamlet

Royal New Zealand Infantry Regiment Beret in Green colour

Original RAR Beret

Green coloured Beret of the Royal New Zealand Infantry Regiment with red and green patch behind the unit badgeGreen

Green beret with metal corp badge of Royal Marine

Steel Helmet mash

RAF Officer Peaked Cap, grey material with crown

Olive Green Steel Helmet, RBR PasgtDate July 2000, Lot No 3664, made by RBR International Ltd, Made in the UK

US Army Helmet with cameo cover

RAN sailor cap with HMAS Sirius on the cap, with blue strip

Hat, mid blue colour with brim, cotton fabric with "United Nations. Nations Unies" - emblem machine embroidered in white thread on front of hagMakers label inside hat crow: "Hills Made By Hills Hats In New Zealand Medium"

United Nations blue cap, with "United Nations Nations unites" written on the cap, its clearly been worn and the colour is faded

Australian DPCU Kevlar helmet cover, used

Soviet Russian Military MVD Spetsnaz VITYAZ Special Forces, Maroon Beret

US M1 Steel helmet with the writing "Current Coy Tightarse" written to the front. The pint has started to peal off

Fur hat with Soviet symbol on the front of the hat

The Victorian Railways guard's hat would have been part of a uniform guards were required to wear as on-board train staff.The Victorian Railways guard's hat has local significance as it was donated by a Wodonga resident. It also has historic significance due to its relative rarity and representativeness as part of the uniform worn by Victorian Railways staff, as well as its relatively good condition. Dark blue/grey felt Victorian Railways hat with the word 'GUARD' in gold on the front of a faded brown band. The hat has the VR logo and size on the inner sweat band. "Superior /Quality /Fur Felt / VR 7 1/4" in gold letters on one side of the inner leather sweat band.victorian railways hat, victorian railways guard's hat, v.r., victorian railways uniforms, railways uniforms, railways guard's hat

A blue baseball cap - USS ARKANSASGold coloured cotton thread - “USS Arkansas” and “CGN-41”on crown of the cap Embroidered hog in white and red thread on crown of the cap between USS Arkansas and CGN-41 Embroidered acorns and oak leaves in gold thread on peak of cap. Label of maker inside cap. uss, carl vinson, cap, cvn-70, the corps, made in u.s.a

Presumably World War II based on comparison with silimar items. Initials inside cap may be associated with item to jacket, initialled with Lt. H. Dixon, VI. 7290.This item has historical signifigance as a an example of Australian military uniform dating presemably to World War II. Military peak cap, dark green. Brown leather chinstrap, attached by buttons on either side of visor with lettering 'AUSTRALIAN MILITARY FORCES' and Australian army insignia. Top of cap has double row of top stitching in dark yellow thread. Metal rimmed air holes (two) on each side under top of cap. Inner band made of brown leather embossed or printed with maker inscription. Rear of inner band has a row of rectangles punched through leather .50 mm in length, 22 in total, threaded through with gold coloured ribbon, tied together at centre back. Inner cap lining made of pale gold fabric, with diamond shaped liner/swear shield attached and topstitched in gold thread. Bronze coloured badge above visor with lettering Australian Commonwealth Military Forces.'THE MYER STORE FOR MEN MILITARY TAILORS MELBOURNE & ADELAIDE' on inner band in gold. Hand written initials H, and what appears to be D N (area has tears and insect damage) visible on lining behind visor. Initials in black marker. military, war, fashion, uniform, head, style, fabric, textile, cap, hat, visor, peak, outfit, myer, tailor, australian, forces, headwear, commonwealth.

Military cap dating from 1966, possibly worn by military personnel in West Germany.This cap is significant as an example of military headwear dating to 1960’s West Germany. Olive drab coloured forage or side cap lined with matching colored fabric. Cap has a flap on each side which may be unfolded. Side flaps are joined by by strip of fabric (all one piece), across the front of the cap which when extended, may form a covering for the mouth area. Flap may be secured with a silver stud button attached to each side of cap. Front of cap displays West German roundel in black, red, and yellow set in olive coloured diamond shaped piece of fabric. Off-white manufacturer’s label on inside, sewn to lining with white thread. Cap is size 54. On inside of hat: (in red) BAMBERGER MUTZEN INDUSTRIE (in black) US12d/22/15565/0028 IX/1966 /5 54 8405-12-138-8897

Light metal Eagle from a WW1 helmetMitt Gott. Fur Koenig. Und Vaterland