In May 2016, the Nillumbik Historical Society invited Greensborough Historical Society to visit its historical centre at Ellis Cottage in Diamond Creek. Ellis Cottage was built in 1865 and is made of local uncut stone. The cottage is a typical farmers residence of this period. The stone construction is unique in this district as most construction is weatherboard. This photo shows steps to front door of Ellis Cottage.Digital colour photographellis cottage, nillumbik historical society inc.

An agricultural tool used by loggers, or farmers, the log splitting wedge has been used for thousands of years and was originally made from stone. They were either driven straight into the wood or into a previously made incision with the blade parallel to the grain. Using a sledgehammer or other tool hammered onto the flat end, the wedge is forced deeper into the log until the force splits the timber.well used, slight surface rust. Octagonal shaft to collar then wedge. Top badly burred over from use.splitting, wedge, log, lumber, tool, tools, churchill island, farm

An agricultural tool used by loggers, or farmers, the log splitting wedge has been used for thousands of years and was originally made from stone. They were either driven straight into the wood or into a previously made incision with the blade parallel to the grain. Using a sledgehammer or other tool hammered onto the flat end, the wedge is forced deeper into the log until the force splits the timber.wedge with groove to prevent sticking. Worn top, burred overwood, splitting, wedge, tool, tools, farm, churchill island

An agricultural tool used by loggers, or farmers, the log splitting wedge has been used for thousands of years and was originally made from stone. They were either driven straight into the wood or into a previously made incision with the blade parallel to the grain. Using a sledgehammer or other tool hammered onto the flat end, the wedge is forced deeper into the log until the force splits the timber.Used by the donor in clearing timber at Olinda and Shady Creek, Victoria. Forms part of a timber clearing tool collection including cross cut saws and Trewhella jack.wood cutting/splitting wedge. Steel. commercially made. Has relief groove.TROJAN [stamped on side]timber cutting;, timber splitting, olinda, shady creek, churchill island heritage farm, wilfred dungan collection

An agricultural tool used by loggers, or farmers, the log splitting wedge has been used for thousands of years and was originally made from stone. They were either driven straight into the wood or into a previously made incision with the blade parallel to the grain. Using a sledgehammer or other tool hammered onto the flat end, the wedge is forced deeper into the log until the force splits the timber.Timber splitting wedge; steel; commercially made; has relief groove.timber splitting, churchill island heritage farm, olinda, shady creek

An agricultural tool used by loggers, or farmers, the log splitting wedge has been used for thousands of years and was originally made from stone. They were either driven straight into the wood or into a previously made incision with the blade parallel to the grain. Using a sledgehammer or other tool hammered onto the flat end, the wedge is forced deeper into the log until the force splits the timber.wood splitting wedge; commercially made; steel; surface rust; with relief groovetimber splitting, churchill island heritage farm, olinda, shady creek

An agricultural tool used by loggers, or farmers, the log splitting wedge has been used for thousands of years and was originally made from stone. They were either driven straight into the wood or into a previously made incision with the blade parallel to the grain. Using a sledgehammer or other tool hammered onto the flat end, the wedge is forced deeper into the log until the force splits the timber.wood splitting wedge; commercially made; steel; relief groove; surface rusttimber splitting, churchill island heritage farm, olinda, shady creek, wilfred dungan collection

An agricultural tool used by loggers, or farmers, the log splitting wedge has been used for thousands of years and was originally made from stone. They were either driven straight into the wood or into a previously made incision with the blade parallel to the grain. Using a sledgehammer or other tool hammered onto the flat end, the wedge is forced deeper into the log until the force splits the timber.small wedge with substantial chip out of narrow end. Relief grooveHYTEST FORGED TOOLStimber splitting, churchill island heritage farm, olinda, shady creek, wilfred dungan collection

An agricultural tool used by loggers, or farmers, the log splitting wedge has been used for thousands of years and was originally made from stone. They were either driven straight into the wood or into a previously made incision with the blade parallel to the grain. Using a sledgehammer or other tool hammered onto the flat end, the wedge is forced deeper into the log until the force splits the timber.blacksmith made steel wedge with irregular relief groove; surface rustwilfred dungan collection, timber splitting, churchill island, blacksmith, olinda, shady creek

An agricultural tool used by loggers, or farmers, the log splitting wedge has been used for thousands of years and was originally made from stone. They were either driven straight into the wood or into a previously made incision with the blade parallel to the grain. Using a sledgehammer or other tool hammered onto the flat end, the wedge is forced deeper into the log until the force splits the timber.blacksmith made; hand-hammered relief groove. Well used - top mushroomed out. timber splitting, blacksmith made, churchill island heritage farm, olinda, shady creek, wilfred dungan collection, wedge

An agricultural tool used by loggers, or farmers, the log splitting wedge has been used for thousands of years and was originally made from stone. They were either driven straight into the wood or into a previously made incision with the blade parallel to the grain. Using a sledgehammer or other tool hammered onto the flat end, the wedge is forced deeper into the log until the force splits the timber.one of three wedges cut from one piece of steel. No relief grooves.timber splitting, churchill island heritage farm, olinda, shady creek, blacksmith made, wilfred dungan collection, wedge

An agricultural tool used by loggers, or farmers, the log splitting wedge has been used for thousands of years and was originally made from stone. They were either driven straight into the wood or into a previously made incision with the blade parallel to the grain. Using a sledgehammer or other tool hammered onto the flat end, the wedge is forced deeper into the log until the force splits the timber.One of three wedges cut from one piece of steel. Blacksmith made.churchill island, wedge, wood splitting

An agricultural tool used by loggers, or farmers, the log splitting wedge has been used for thousands of years and was originally made from stone. They were either driven straight into the wood or into a previously made incision with the blade parallel to the grain. Using a sledgehammer or other tool hammered onto the flat end, the wedge is forced deeper into the log until the force splits the timber.one of three wedges cut from the same piece of steel. No relief groovestimber splitting, churchill island heritage farm, olinda, shady creek, wedge

This four roomed cottage with a detached kitchen was built for a Mr Elam, c. 1867. Occupants of this house among others have been Sir George Farmer, Christopher Crisp, Joseph Voysey, E. Simpson, J.R. Crook and H. Condon. It is located in Young Street and is opposite the site where the original Bacchus Marsh Mechanics Institute stood until about 1995.Small sepia unframed photograph on card with gold border framing photograph. Housed in the album, 'Photographs of Bacchus Marsh and District in 1883 by Stevenson and McNicoll'. The photograph is of a neat Georgian-style, double-fronted cottage. The hip roof and verandah are roofed with wooden shingles. Two tall chimneys stand, one at either side of the cottage, while a smaller chimney can be seen at the rear. The front verandah is decorated with carved barge boards. A white picket fence runs along the front, the entry posts featuring a carved globe-shaped finial. Standing inside the front fence is a smartly dressed gentleman, leaning on the fence. This is possibly Mr Joseph Voysey, Head Master of Bacchus Marsh Primary School 1879-1888, who purchased this cottage in 1882, the year before this photo was taken. Two women, one with a dog at her feet, stand on the footpath with a young girl holding a doll. This cottage still stands in Young Street, Bacchus Marsh.On the front: Stevenson & McNicoll. Photo. 108 Elizabeth St. Melbourne. COPIES CAN BE OBTAINED AT ANY TIME. On the back: LIGHT & TRUTH inscribed on a banner surmounted by a representation of the rising sun. Copies of this Portrait can be had at any time by sending the Name and Post Office Money Order or Stamps for the amount of order to STEVENSON & McNICOLL LATE BENSON & STEVENSON, Photographers. 108 Elizabeth Street, MELBOURNE houses bacchus marsh, stevenson and mcnicoll 1883 photographs of bacchus marsh and district

These two bottles have contained milk sold by the Warrnambool firm of Antarctic Ice Pty Ltd. in the mid 20th century.In the 1930s a pasteurizing plant was set up in Warrnambool in conjunction with an ice works in Kepler Street known as Antarctic Ice (Good and Stevenson). This firm had secured a milk supply from farmers in the Warrnambool region. Eventually Antarctic Ice was bought by the Warrnambool Cheese and Butter Factory and Kraft Foods as equal partners and the milk was marketed as Sungold. Also a farmer named Kaye Ryan had set up a pasteurization plant in East Warrnambool (Raglan Parade/Verdon Street) in opposition to Antarctic Ice and Sungold. Kraft and Warrnambool Cheese and Butter bought out Ryan and moved Sungold operations to the Ryan site. Kraft Foods sold its share of Sungold to Warrnambool Cheese and Butter and in 1989 the milk factory was moved to the Allansford site of Warrnambool Cheese and Butter and Sungold continues there today.These bottles are of interest, firstly as examples of the half-pint milk bottles familiar to people living in the mid 20th century and secondly because they are good examples of the bottles used by an important Warrnambool business, Antarctic Ice. These are two clear glass bottles. When filled each bottle contained 10 fluid ounces or half a pint of milk. The bottles have a round base with a rounded body tapering slightly to a thick neck and a thick moulded top. The bottles when filled had a seal consisting of a circle of waxed cardboard that was pressed into a recess on the lip of the bottle. These lids are missing.The bottles have lettering impressed into the glass. ‘This bottle contains milk bottled for sale by Antarctic Ice Products Pty Ltd Warrnambool and always remains their property. It is loaned and cannot be legally used or sold by others.’ ‘Contents 10 ozs.’ ‘497’ milk production in warrnambool, antarctic ice pty ltd

These are milk bottles from the Warrnambool firm of Antarctic Ice. In the 1930s a pasteurising plant was set up in Warrnambool in conjunction with an ice works in Kepler Street, Warrnambool, known as Antarctic Ice (Good and Stevenson). This firm secured a milk supply from several dairy farmers in the Warrnambool district. Antarctic Ice at the Kepler Street site was eventually bought by the Warrnambool Cheese and Butter Company and Kraft Foods as equal partners and the milk was marketed as the Sungold brand. A farmer, Kaye Ryan, had set up a pasteurization plant in East Warrnambool (Raglan Parade/Verdon Street) to treat his own milk in opposition to Antarctic Ice and later Sungold. Kraft and Warrnambool Cheese and Butter purchased the Ryan business and the Sungold operations moved to the Ryan site. Kraft sold its share of Sungold and in 1989 the Sungold plant was moved to the Warrnambool Cheese and Butter Factory at Allansford where it operates today. These bottles are of great interest, firstly as examples of the pint bottles in which we used to receive bottled milk in the mid 20th century and secondly as examples of the bottles used by an important local Warrnambool firm, Antarctic Ice. These are six clear glass one pint milk bottles. They have round bases and bodies tapering through to the neck with a round moulded glass top. These bottles were originally sealed with a circle of waxed cardboard pressed into a recess at the top but there are no seals with these bottles. .1 bottle has a slight chip on the base and on the top opening.‘This bottle contains milk bottled for sale by Antarctic Ice Products Pty Ltd Warrnambool’ ‘Bottle is the property of the above. It is loaned and cannot be legally used by others.’ ‘497’ milk supply in warrnambool district, history of warrnambool

This item wasused before diesel, electric and battery drilling apparatus were used by farmers, and other trades requiring a portable yet reliable method of drilling holes. As this item is a 3/4 inch hole drill it would be suitable for fencing and providing holes for structural studs. As with all outdoor farm equipment, man power was required (be it the farmer or farm hands). Fitness of the operator was at a high standard but protective gloves were not highly thought of as it was before occupational, health and safety regulations became mandatory over all manual handling activities, be they on rural properties or town/city factories. This period was one where the male ego was at its pinnacle i.e. the harder the tasks the more of a man was required. Hard manual work was not only the "way to go" but also a necessity. Evolution of cheap portable electric/battery powered tools opened up a more efficient method available, especially to those with less muscle strength. This item personifies the rugged environment of the rural workplace. The Kiewa Valley with its main emphasis on farming and grazing provided ample opportunity to use this construction implement. The manufacturer being a Scottish tool company is very significant in the era when this hole maker was in high demand. British steel products were of high grade and had a good record of reliability. The reliability of any tool was a solid factor for farmers and tradesmen in this semi-isolated region (Circa early 1900s) within the Kiewa Valley and its regional area. This factor,although not as crucial, post 1960s, when Asian manufacturers entered the market place and produced cheaper tools and transportation and supplies was more frequent and reliable, the need for the more expensive British made tools diminished considerably. After the influx of tradesmen from war torn Europe (post 1945) and the increased availability of tradesmen in the Kiewa Valley and its region the price of tools was and still is not as crucial and the cost of all required tools has become a minimal part of the equation. It is only with the emerging younger trades person, farmer and grazier, who have more, "one eye on production costs" and no "old ties to the motherland" inert mind set that quality tools such as this auger and other hand tools "must be made to last a life time" is no longer part of the modern work environment.This cast iron, hand operated Auger has a short barrel shaped cylinder at one end (known as the "Eye") and at the other end a Helical screw blade (screws the cutting edge into wooden material, thereby creating a hole 3/4 inch diameter in the wood) . The barrel section at the top permits a metal or wooden leverage plank to be inserted. The main rod has a 180mm long cutting/screw blade running from the bottom up towards the "eye" end. From the end of the screw blade to the handle is 380mm and cylindrical, but this changes at 550mm from the "eye" end to a 14mm x 10mm rectangular shape shaft.This shaft end is welded to the "Eye".On the shaft below the "eye" is stamped " MATHESON GLASGOW" on the front side and a spade (cards) symbol on the back.auger, hand drill, fencing, tool, rural trades, brace & bit

This item was before diesel, electric and battery drilling apparatus were used by farmers, and other trades requiring a portable yet reliable method of drilling holes. As this item is a 3/4 inch hole drill it would be suitable for fencing and providing holes for structural studs. As with all outdoor farm equipment, man power was required (be it the farmer or farm hands). Fitness of the operator was at a high standard but protective gloves were not highly thought of as it was before occupational, health and safety regulations became mandatory over all manual handling activities, be they on rural properties or town/city factories. This period was one where the male ego was at its pinnacle i.e. the harder the tasks the more of a man was required. Hard manual work was not only the "way to go" but also a necessity. Evolution of cheap portable electric/battery powered tools opened up a more efficient method available, especially to those with less muscle strength.This item personifies the rugged environment of the rural workplace. The Kiewa Valley with its main emphasis on farming and grazing provided ample opportunity to use this construction implement. The manufacturer being a Scottish tool company is very significant in the era when this hole maker was in high demand. British steel products were of high grade and had a good record of reliability. The reliability of any tool was a solid factor for farmers and tradesmen in this semi-isolated region (Circa early 1900s) of the Kiewa Valley and its regional area. This factor,although not as crucial, post 1960s, when Asian manufacturers entered the market place and produced cheaper tools and transportation and supplies was more frequent and reliable, the need for the more expensive British made tools diminished considerably. After the influx of tradesmen from war torn Europe (post 1945) and the increased availability of tradesmen in the Kiewa Valley and its region the price of tools is not as crucial and the cost of all required tools has become a minimal part of the equation. It is only with the emerging younger trades person, farmer and grazier, who have more, "one eye on production costs" and no "old ties to the motherland" inert mind set that quality tools such as this auger and other hand tools "must be made to last a life time" is no longer part of the modern work environment.This cast iron hand operated drill, has a short barrel-shaped cylinder, known as "the eye" welded across the main rod and is 30mm in circumference. It also has a hole drilled to allow a screw to be fastened onto the hand stock ( not available).The main rod is solid for 400mm and then has been flattened and coiled (Helical screw blade) for another 200mm. At the end of the larger screw blade there is a smaller gauged starter blade with a pointer thread 15mm long. This Auger produces a 1/8th inch hole (metric measurement not used at time of manufacture) See KVHS 0469 for 3/4 inch hole and KVHS 0471 for another 1/8th inch hole.A number 5 stamped on the flat sideauger, hand drill, fencing, tool, rural trades, brace & bit

This item was before diesel, electric and battery drilling apparatus were used by farmers, and other trades requiring a portable yet reliable method of drilling holes. As this item is a 3/4 inch hole drill it would be suitable for fencing and providing holes for structural studs. As with all outdoor farm equipment, man power was required (be it the farmer or farm hands). Fitness of the operator was at a high standard but protective gloves were not highly thought of as it was before occupational, health and safety regulations became mandatory over all manual handling activities, be they on rural properties or town/city factories. This period was one where the male ego was at its pinnacle i.e. the harder the tasks the more of a man was required. Hard manual work was not only the "way to go" but also a necessity. Evolution of cheap portable electric/battery powered tools opened up a more efficient method available, especially to those with less muscle strength.This item personifies the rugged environment of the rural workplace. The Kiewa Valley with its main emphasis on farming and grazing provided ample opportunity to use this construction implement. The manufacturer being a Scottish tool company is very significant in the era when this hole maker was in high demand. British steel products were of high grade and had a good record of reliability. The reliability of any tool was a solid factor for farmers and tradesmen in this semi-isolated region (Circa early 1900s) of the Kiewa Valley and its regional area. This factor,although not as crucial, post 1960s, when Asian manufacturers entered the market place and produced cheaper tools and transportation and supplies was more frequent and reliable, the need for the more expensive British made tools diminished considerably. After the influx of tradesmen from war torn Europe (post 1945) and the increased availability of tradesmen in the Kiewa Valley and its region the price of tools is not as crucial and the cost of all required tools has become a minimal part of the equation. It is only with the emerging younger trades person, farmer and grazier, who have more, "one eye on production costs" and no "old ties to the motherland" inert mind set that quality tools such as this auger and other hand tools "must be made to last a life time" is no longer part of the modern work environment.This cast iron hand operated drill, has a short barrel-shaped cylinder, known as "the eye" welded across the main rod and is 30mm in circumference. It also has a hole drilled to allow a screw to be fastened onto the hand stock ( not available).The main rod is solid for 400mm and then has been flattened and coiled (Helical screw blade) for another 200mm. At the end of the larger screw blade there is a smaller gauged starter blade with a pointer thread 15mm long. This Auger produces a 1/8th inch hole (metric measurement not used at time of manufacture) See KVHS 0469 for 3/4 inch hole and KVHS 0470 for another 1/8th inch hole.auger, hand drill, fencing, tool, rural trades, brace & bit

Catalogue card reads, "The Mountain District Horse and Pony Club's winning team with the shield presented by the A.N.Z. Bank. From left: Judith Byrne, Helen Harvie, Marian Farmer, Campbell Sullivan". Note on back of photograph reads, "Annual two day competition of the Pony Clubs' Association of Victoria held at Frankston 21st and 22nd May. [no year stated].

140 Loose pages titled The Bendigo Saleyards Economic Viability Study. Report written by Kate Millard on behalf of the Bendigo Development Committee Inc. Contents include: Chapter 1 - Background Information, Chapter 1 - Present Operations at the Saleyards, Chapter 3 - Economic Factors, Chapter 4 - Environmental Factors, Chapter 5 - Selling Techniques, Chapter 6 - Employment Study, Management and Sundry Issues, Chapter 7 - Survey of Farmers and Saleyard Users in the 'Catchment Area', and Chapter 8 - Recommendations of the Report. Includes diagrams and maps. Recommendations printed on dark yellow paper.bendigo, council, cattle markets, bendigo saleyards collection - the bendigo saleyards economic viability study, bendigo development committee inc., kate millard, loddon campaspe planning authority, street, ryan and associates, bendigo city council, strathfieldsaye shire council, department of industry technology & resources, national library of australia, meldrum burows & partners, core wilson sayer, town planning appeals panel, ces, victorian farmers and graziers association, stock agents association, department of agriculture, department of industry technology & resources, department of conservation forests and land, cr jock comini, rca depot, wellsford rifle range, bendigo airport, bendigo field naturalists club, mr david kennedy, mr john brumby, mr john radford, neil o'keefe, bendigo east progress association, bendigo east traders, trades hall council, mr tom uren, mr frank wilkes, mr bruce reid, mr k i m wright, mr e t ebery, bendigo pastoral council of the vfga, victorian meatworks association, bendigo stock & station agents association, rutlands transport, mr don pickles, country abattoirs & wholesalers association association of victoria, meat and allied trade federation of australia, bendigo saleyards advisory committee, bendigo residents & ratepayers association, a h & n graham, mrs p unmack australian bureau of statistics, mr lloyd houlden, cr c rodda, mr jolly, mr tony milanese, dr robert carter, university of melbourne, bendigo college of tafe, t matthews, a s & r d rutland, john kerr, j talbot, g l o'sullivan, penney & lang pty ltd, graeme pickering, pickhall j w & sons, r a plant, w k schmidt, t j vick, k & j wignall, a e wright, g chapman, a j gillies, p g & m m harris, ian r hollingsworth, b kennedy, s letcher, s & d k letcher, p m llewellyn, l g mason, boyer r t, connally m f, kennedy & mortlock, nevins j p, r w johnstone, w j keith, b d kelly, notman r, pitts a j & c a, pitts mervyn l & co, rowe w o, warren k m, associated stock & station agents, dalgety farmers ltd, elders dsm estates, ellis nuttall & co, gallagher g d, hamilton real estate, mcgregor ralph h & co, mckean w & co, miller turner livestock co, vains e m & co, victorian producers, hill m j & co, bennetts meats, comell bros, davis b & d, hardwick g f & v c, penney & lang p/l, tendercut meats, northern seed supply co, bendigo fertilizers, agri business pty ltd, agrilink consulting group pty ltd, acil aust pty ltd, mcgowan & associates, chapman w c, talbot e j, mcculloch w & sons pty ltd, k v equipment, commercial egg producers assoc co-op, monsanto aust ltd, balmer bryan r, barry i j, bath l, clarke b j, treacy k m, turner j m, bendigo mower serv pty ltd, everlast concrete tank tyltd, wicks bros, canvas goods, don mcarthur, bendigo communications, transcom, emdell pty ltd, epsom pharmaceutical supplies, sandhurst fencing pty ltd, arnolds gates & fencing, r furniss, carne neville, awa & unicla, ajm refrigeration, bendigo concrete sawing service, hamilton r j, hearpes t w, j e brown, campey dr a r, fyffe j j, kangaroo flat vet clinic, ottrey k e, bendigo sprinkler installations, milnes irrigation, onga pumpshop, barastoc products, bush's produce stores, epsom produce, k m m pty ltd, bendigo grain co, eaglehawk chaff mills, grain elevators board dept, bonneys pest control, knights pest control, brown wk & l d, bendigo sewerage authority, bendigo water board, aci computer services, leham donald, a e hueffer & associates, wolmoke planners, p langley, mr ken strachan, mr evan jones, mr peter byrnes, mr wayne street, street ryan & associates

Legal document ( deed of covenant and extension of mortgage ) Written on front :Mr. Thomas Curlett to Messrs Faircough & Brown, dated 14 June 1892, Deed of Covenant, and extension of terms of mortgage'' Document gives details of indenture dated 14 June 1892, between Thomas Curlett of Tragowel, farmer, and William Fairclough formerly of View St., Sandhurst ( now called Bendigo ) but now of head office of the Bank of Victoria., and Gilbert Wilson Brown of Mathoura Road, Toorak, gentlemen. Typed on bottom of page 'Connelly & Tatchell, Bendigo' Brown one penny stamp at top left of the document .business, legal, connelly, tatchell & dunlop, thomas curlett, gilbert wilson brown, william fairclough, connelly, tatchell & dunlop

A copy of "The Loddon Valley Courier and Farmers' Advocate" dated February 27, 1920. the paper has 4 pages and it was inside the book catalogue number 1572.127. on the back page there is an article that connect the paper to the book. The article is titled: Farewell to Mr. and Mrs. J. Waugh and family and it describe an evening at the Laanecoorie hall where the family was presented with gifts from the Laanercoorie for the standing in the community. Mr. John Waugh received a gold chain with an inscribed medal, Mrs. Waugh received a coffee service, miss Nora Waugh received a gold pendant and Tom Waugh a shaving outfit.newspaper

Red covered auction catalogue for a sale held on the 26th February, 1936 by Order of The State Rivers and Water Supply Commission at Clyde and the Main Depot at Narre Warren. For sale was Dredging,Mining and Contractors' Machinery, Plant and Equipment, Steam Winches, Boilers, Rails, Roadmaking & Farmers' Implements, Scrap Iron, Rolling Stock, Harness and Sundries. Columns to write prices on the right side edge of the pages. Hand written Supplementary List for Narre Warren Depot machine sewn inside the back cover. J. H. Curnow & Son were the auctioneers and the catalogue was printed by Boltons Print, Bendigo.business, auctioneers, j h curnow & son pty ltd, ian dyett collection - auction catalogue - the state rivers and water supply commission, j h curnow & son, boltons print bendigo

''Renny Hill'', built c1876, was the home of William Andrew Taylor (1849-1927) and Isabella Park Taylor, nee Dawson (1842-1929). Isabella was a friend to First Nations people and together with her father, James Dawson, recorded their languages and customs. William Taylor was a farmer, Councillor and civic leader. In 1883 he gifted the world's oldest statue of Robert Burns to the people of Camperdown.Black and white image of ''Renny Hill'' homestead, Camperdown Renny Hill built 1876? Built for Isabella Park (Dawson) Taylor and William Taylormt sugarloaf, mount sugarloaf, cdhs, renny hill, djargurd wurrung, djargurdwurrung, cdhsfirstnations

This suture needle was used by Ferguson Fisher, a farmer, of Orbost. He was a private , 17340, with the army medical corps reinforcements and then with 8 Field Ambulance. He did his initial training at Seymour Clearance Hospital (AMC) at Royal Park and then 5 Australian General Hospital. He served in France and Belgium. He was not a trained doctor but had been taught to stitch wounds.He returned to Australia in 1919. This item gives an insight into the human element of World War 1 ensuring that those who were part of the Orbost community and played a vital role during this time are remembered.A small curved stainless steel suture needle.ww1 fisher-ferguson-linklater suture-needle

This is a photograph of Councillor Jacob Perry who represented Central Riding in the Orboast Shire Council from 1928 - 1931. and from 1934 - 1944. He was president twice in 1934-1935 and 1943-1944 Jacob Perry was an Orbost farmer. Born 1874. Died 1950. He was a Boer War veteran , 4th Victorian Imperial Bushmen. He was a shire councillor and worker for school affairs.This item is associated with the Orbost Shire Council. The shire covered an area of 9,347 square kilometres and existed from 1892 until 1994 when it became part of the East Gippsland Shire Council. It is also associated with the Perry family early Orbost settlers.A black / white head and shoulders portrait photograph of a moustached man in a suit.on back - "Cr Jacob Perry J.P."perry-jacob orbost-shire-council

This is the author's account of life in Northern Queensland. Edwin James Brady was an Australian poet. He was born at Carcoar, New South Wales, and was educated both in the United States and Sydney. He worked as a wharf clerk, a farmer, and journalist, and edited both rural and city newspapers. Brady established a writers' and artists' colony at Mallacoota, in 1909, and he continued to live there until his death in 1952. E. J. Brady was a leading figure of Australian literature. He has an association with Mallacoota, a small town in the East Gippsland region of Victoria, Australia. A 303 pp book with a hard back cloth covered bright orange cover. It is titled in black print " The Land of the Sun" and has black print illustrations of crops and the sun. It contains black/white plates and a fold-out map of Queensland.brady-edwin-james book--the-land-of-the-sun queensland-northern

In 1956 television came to Australia, just in time for the Melbourne Olympics. Television sets were very expensive, they were comparable to buying a car. This television set was purchased in Wonthaggi in 1962. it originally had a 12ft long trailing antenna. Mr Ernie Baker of Farmers Lane, Orbost, set it up to receive Channel 12 (in black and white) with power generated from the Orbost Butter Factory.This item is an example of one of the first television sets to be used in Orbost.A television set in a wooden case (laminated ply). It has speakers on both sides and a picture tube protruding at the back. The television has a wood casing, a glass tube screen and a control panel with channel changer, volume, on/off switch, brightness control at the front of the set. media television communication