Folding pocket knife. Black checkered handle with blade and tin opener.1942 B. V Ler Ltd Sheffield

Prior to the 1900s, complicated births, particularly where there was a disproportion between the size of the woman’s pelvis and the foetus’ head, often meant the death of the baby and the mother. Instruments for removing a dead or ailing foetus from within the mother were used to attempt to save the mother’s life. The cranioclast, first invented by Dr. James Simpson in the mid-19th century and later redesigned by others, was used for fetal destruction and removal. Fundamentally a strong pair of forceps, the cranioclast was used to crush the skull, decreasing its diameter. In some cases, this would allow normal uterine contractions to expel the foetus; in others, the physicians would use an obstetrical hook to pull the body out of the mother. Doctors disagreed as to the pelvic diameter that would necessitate this drastic intervention, but generally found that 3 to 3.5 inches was the smallest size through which a living infant could pass. Equally of debate was the pelvic size through which the dead fetus could be extracted. When vaginal extraction was deemed unadvisable, Caesarian section would be performed. As caesarean section became safer and more common with the advent of anaesthetics and antiseptic techniques, the use of cranioclasts and obstetrical hooks diminished. (Museum of Health Care, Kingston) Dr Mitchell Henry O'Sullivan worked in the Victorian country town of Casterton as a general practitioner from 1919 until his death in 1977. He also practiced obstetrics. His son, Dr David More O'Sullivan donated his obstetric bag and its contents to the College in 1999. The bag and contents are a unique time capsule of the type of instruments and pharmaceuticals used in the inter-war period.Hinged metal tool with bakelite handles at one end and serrated teeth at other end. The instrument is in two sections. The right or upper blade has a black bakelite handle. There are two screws on the inside of the handle, 5.5cm apart. In the centre of the blade is a screw notch in the shape of a small horseshoe. On the inner side of the blade is a depression extending most of the length. The left, or lower, blade also has a black bakelite handle. There are two screws on the inside of the handle approximately 6cm apart. Mobile metal clasps in the shape of an 'S' , with three serrations, is attached to the distal end of the handle, which enables the blades to be opened or closed. destructive instruments

This tool is one of several tools in a collection that is believed to have belonged to the Warrnambool carpenter and businessman, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some time in Port Fairy. In 1865 he formed a partnership with Christopher Beattie and established the Warrnambool undertaking business of Beattie and Phillips. This business continued on after the deaths of the founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics Institute.This item is of interest as a good example of a vintage tool and as a memento of the Warrnambool carpenter and businessman, Henry Phillips. This is a boat-shaped wooden plane tool. Part of the top of the body has been gouged out and a metal blade inserted. This blade, with a wooden piece resting on it, protrudes out the base and forms a planing mechanism. vintage tools, henry phillips, warrnambool, history of warrnambool

Dagging shears belonged to donor's father Maurice Dalton who was foreman of the show floor of the Dennys Lascekkes building until his retirement after 34 years with the company. Maurice used the shears in his work as a wool classer in rural Victoria and New South Wales. The shears are SUCCESS 11" Ball Bros. & Co. Dagging Shear, made in Sheffield, England.A pair of metal blade shears. The blade is engraved with 'SUCCESS / BALL BROS & CO / SHEFFIELD ENGLAND'. The ends of the two symmetrical grips loop around on themselves where they are riveted together to form a spring action.Mirrored. Image: Sword Mirrored. Lettering: SUCCESS / BALL BROS & CO / SHEFFIELD ENGLAND

Bayonet, wooden handle, metal scabbard - thought to be Czech.On blade is CSZ over the letter A, Scabbard markings TGFE3 48.

Steel handled bayonet c/w steel scabbard and leather frog On handle guard KA2 NO463 On blade 448 On scabbard 319

Bayonet wooden chequered handle metal scabbardMatching numbers on bayonet and scabbard 7462B Toledo written on blade

Used in the grooming of horses c1900We believe these were imported and sold by Holden and FrostTwo pronged steel arm , wooden handles with steel clippersA MARTIN & CO MANUFACTURERS on arms. A MARTIN IMPROVED on clipper bladeequine, agriculture, civilian 1900

Historical significance.Large steel machete in canvas scabbard with webbing frog.D.Arrow D (Dept. of Defence) DC-44 inscribed on blade.

A Mathieson & Son History: In 1792 John Manners had set up a workshop making woodworking planes at 14 Saracens Lane Glasgow. He also had employed an apprentice Alexander Mathieson (1773-1851). But in the following year at Saracen's Lane, the 1841 census describes Alexander Mathieson as a master plane-maker now at 38 Saracen Lane with his son Thomas Adam working with him as a journeyman plane-maker. Presumably, Alexander must have taken over the premises and business of John Manners. Now that the business had Thomas Adam Mathieson working with his father it gradually grew and became more diversified, and it is recorded at the time by the Post-Office Glasgow Annual Directory that by 1847-1848 Alexander Mathieson was a “plane, brace, bit, auger & edge tool maker.” In 1849 the firm of James & William Stewart at 65 Nicolson Street, Edinburgh was taken over and Thomas was put in charge of the business, trading under the name Thomas A. Mathieson & Co. as plane and edge-tool makers. Thomas's company went on to acquire the Edinburgh edge-tool makers “Charles & Hugh McPherson” and took over their premises in Gilmore Street. In the Edinburgh directory of 1856/7, the business is recorded as being Alexander Mathieson & Son, plane and edge-tool makers at 48 Nicolson Street and Paul's Work, Gilmore Street Edinburgh. The 1851 census Alexander is recorded as working as a tool and plane-maker employing eight men. Later that year Alexander died and his son Thomas took over the business. Under the heading of an edge-tool maker in the 1852/3 Post-Office Glasgow Annual Directory the firm is now listed as Alexander Mathieson & Son, with further entries as "turning-lathe and vice manufacturers". By the early 1850s, the business had moved to 24 Saracen Lane. The directory for 1857/8 records that the firm had moved again only a few years later to East Campbell Street, off the Gallowgate area, and that through further diversification was also manufacturing coopers' and tinmen's tools. The ten-yearly censuses report the firm's growth in 1861 stating that Thomas was a tool manufacturer employing 95 men and 30 boys; in 1871 he had 200 men working for him and in 1881 300 men. By 1899 the firm had been incorporated as Alexander Mathieson & Sons Ltd, even though only Alexander's son Thomas appears ever to have joined the firm so the company was still in his fathers' name. In September 1868 Thomas Mathieson put a notice in the newspapers of the Sheffield & Rotherham Independent and the Sheffield Daily Telegraph stating that his firm had used the trade-mark of a crescent and star "for some time" and that "using or imitating the Mark would be proceeded against for infringement". The firm had acquired its interest in the crescent-and-star mark from the heirs of Charles Pickslay, the Sheffield cutler who had registered it with the Cutlers' Company in 1833 and had died in 1852. The year 1868 seems also to be the one in which the name Saracen Tool Works was first adopted; not only does it figure at the foot of the notice in the Sheffield press, it also makes its first appearance in the firm's entry in the Post-Office Glasgow Annual Directory in the 1868/9 edition. As Thomas Mathieson's business grew, so too did his involvement in local public life and philanthropy. One of the representatives of the third ward on the town council of Glasgow, he became a river bailie in 1868, a magistrate in 1870 and a preceptor of Hutcheson's Hospital in 1878. He had a passion for books and was an "ardent Ruskinian". He served on the committee handling the bequest for the setting up of the Mitchell Library in Glasgow. When he died at Coulter Maynes near Biggar in 1899, he left an estate worth £142,764.  Company's later years: Both Thomas's sons, James Harper and Thomas Ogilvie were involved in the continuing life of the firm. James followed in his father's footsteps in becoming a local public figure. He was appointed Deputy Lieutenant of the County of the City of Glasgow and was made a deacon of the Incorporation of the Hammermen of Glasgow in 1919. His brother Thomas Ogilvie was recorded as tool manufacturer and employer in the 1911 census. Thomas Ogilvie's son Thomas Alastair Sutherland Ogilvie Mathieson was born in 1908 took a rather different approach to engineering, however, by becoming a racing driver. In 1947 he wed the French film actress Mila Parély. The firm had won many awards at world fairs for their goods. At the Great Exhibition, London, 1851. Prize medal for joiners' tools in the class of Cutlery & Edge Tools, Great London Exposition, 1862. Prize medal honoris causa. International Exhibition, Melbourne, 1880. Gold medal International Exhibition of Industry, Science and Art, Edinburgh, 1886. Prize medal James Howarth & Sons History: James Howarth and Sons, of Broomspring Works, Bath-street Sheffield were among leading manufacturers of edge tools and joiners tools. The business was commenced in 1835, by James Howarth who was joined by his sons in 1863. Howarth manufacture light and heavy edge tools of all kinds, including a variety of joiners’ tools, hammers, skates, augers. The firm soon was extended and began exporting their products to the USA, Canada, Australia, China, and many other overseas destinations as well as to the home market. They were exhibitors at the London Exhibitions of 1851 and 1862, and Paris in 1855, receiving awards. Howarth was primarily operating from Sheffield. J Howarth & Sons produce goods of a very high class and were also engaged in the manufacture of steel, file, saw, and similar trades. Upon the death of James Howarth, the firm was managed by his four sons James, Samuel, Edwin, and John Howarth. The firm was discontinued in 1913, and its trademark was acquired by Robert Sorby and Sons in 1922.A significant tool made in the late 19th century by a known makers and sought after by collectors of vintage wood working tools.Smoothing Plane Coffin type. 2" stamped on one end and Tertius Keen & Co (plane maker.) Blade has James Howarth Warranted Cast Steel Sheffield (maker of blade only.)flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

WW1 era shaving cut-throat razorWW1 eraFolding cut-throat steel razor and cardboard protective case (case missing the top section). The blade folds into a dark brown coloured two sided bakelite plastic handle, riveted at each end. The cardboard case is dark coloured, with a light green coloured insert. The steel blade has a curved section at one end, and the shaving blade at the other.THE CROWN AND (crown and sword picture trademark) SWORD RAZOR EXTRA HOLLOW GROUND CROWN (crown and sword picture trademark) & SWORD TRADE-MARK MADE IN GERMANY ERN 1166 The Crown and Sword picture trademark is embossed on one side of the Bakelite holder.razor, cut-throat, steel, germany, crown and sword, bakelite, shaving

Item in the collection re Wing Commander Leonard Bacon OBE. Refer Cat No 7510.2 for his extensive service details. Mark 7 cartridge that has been fired. Lead bullet head in top with a cleft cut into it. A flattened piece of metal inserted into the cleft in the shape of a butter knife blade. Blade is loose within its mount.Base of cartridge engraved "1932", "M", "V11".trench art, souvenir

Used by Lt Col Murray Bourchier, Commanding Officer 4th Light Horse RegimentTwin bladed pocket knife. Steel construction with black plastic type material on handle. Poor condition, body pin separated at blade end and sides sprung apart. Handle covering chipped on one side. Owner's initials "MB" scratched on handle. gallipoli, 1915, world war 1, pocket knife, bourchier, 4lh, 4th light horse

Possession of POW at Camp13, Murchison. Formerly part of German paratroopers equipment/arms in WW2German paratroopers sidearm resembling large pocket knife with blade and retractable spike. Wood covereed metal shaft/handle riveted. Metal ring attached at spike end. Thumb guide towards unprotected blade.SMF Solingen Rostfreiarms, edged, weapons

Shears belong to donor's father Maurice Dalton who was foreman of the show floor of the Dennys Lascekkes building until his retirement after 34 years at the building. Maurice used the shears in his work as a wool classer in rural Victoria and New South Wales. The shears are 14" N.1 Combination UTS hand shears made in Sheffield, England.A pair of metal blade shears. The blade is engraved with 'MADE IN ENGLAND / COMBINATION / U.T.S. / SHEFFIELD / N.1'. The ends of the two symmetrical grips loop around on themselves where they are riveted together to form a spring action.Mirrored. Lettering: MADE IN ENGLAND / COMBINATION / UTS / SHEFFIELD / N. 1

Straight razors were once the principal method of manual shaving, they have been largely overshadowed by the safety razor and electric razors.A straight razor with an ivory coloured bakelite handle. the blade folds back into the handle'RELIANCE - WALDOO ERN 1683 Made in Germanygrooming ern-carl razors-straight

Draw knife wooden 2 handles one with wood missing square bladeflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Screw driver with chipped blade. Wooden handle is turned. Inscription is stamped into handle.(Inscription is indecipherable)flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, screwdriver, tool, hand tool

Plane Moulding type Round Maker Routledge Stamped JAS Burden No Bladeflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Panel Plough Plane missing blade. Made by Mathieson and Son and stamped with a '3'flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, panel plough plane, mathieson and son

This type of propeller was used on Oxford Airspeed aircraft which was a similar type as the Avro Anson and also used for training at other air schools in Australia.Wooden two blade propeller, painted black with red tip one endDRG Z 3931 /4 Cheetah X LHpropeller, cheetah, oxford airspeed,

Issued to Geoff Murray No 3411521, Vietnam 3 CAV Regt 27.11.67 to 22.10.68, Survey Corp 15.10.69 to 15.10.70. Refer 638P for his service history.Metal Clasp knife with 2 blades and a pointed piece with a rope cord attached.D^D"- Sterling, Made in Australiapersonal effects - pocket knives, military history, weapon, clasp knife

Bayonet and scabbard for No 4 .303" Rifle, 25 cm "pig sticker" bladeNo 4 MK II, 1093(?)bayonet, 303, pig sticker

Set of two identical swords, rapier style sword with straight, patterned blade "Made - Spain/ Toledo"

Set of two identical swords, rapier style sword with straight, patterned blade "Made - Spain/ Toledo"

Knife bayonet , Model 1896, 21 cm blade, for Swedish Mauser Rifle078, 638, No 829, Swedish crown, crown & anchor stamp, No 3a, bayonet, swedish