Small round tin in original box, containing Superb Skin Food, sole manufacturers Sander & Sons Bendigo, Vic, Australia. With directions sheet.Sander & Sons Bendigopersonal effects, cosmetics, cream

Bendigo Advertiser ''The way we were'' from 1999. Historic retail: S. Keam & Co Importers and Manufacturers Shop, Bendigo, circa 1890.newspaper, bendigo advertiser, the way we were

The Soulevac sterile glass drip tube was used for blood transfusions.Clear glass bulb with rubber caps at each end and blue manufacturer's information stamped onto bulb. Drip tube is housed in original packaging.blood transfusion, world war i, first world war

Badge made for the Hawthorn Tramways Trust for use by employees as a free pass to travel on their tram services. c1916. Made by Stokes & Sons Melbourne.Demonstrates a HTT employees pass.Badge - made from a pressed or cast metal, stamped '85' on rear with the manufacturers name at the base. Fitted with a steel ring through an eyelet at the top.passes, travel passes, htt, tramways, employees

Used by Dept of Defence member NR 3112081.This is one pair of lacquered GP Boots. Only one lace is present. They are a size 10. They are rubber soled with leather uppers the surface of the leather is of a high glossy nature. They are Officer's pattern, parade boots.Inside the boots, is the size sticker (10). Moulded into the soles is the manufacturers name - "Drovers".uniform, gp boots

Sepia photographNoted in pencil on reverse: "3/11/67". Polaroid Manufacturer's Batch No. A730301K.1967, briar hill, para road, polaroid, sherbourne road, simms road

Sepia photographNoted in pencil on reverse: "3/11/67". Polaroid Manufacturer's Batch No. A730301K.1967, briar hill, para road, polaroid, sherbourne road, simms road

Part of the Reverend Chaplain Major Thomas Bruce Williams, No 556101, Collection.Khaki battle dress trousers in wool fabric with pleated front. Waistband and pockets lined with light khaki cotton drill fabric. Wide waistband secured with three brown bakelite buttons Inside the waistband are six brown bakelite buttons used to secure braces. On each outer side of the waistband are two tabs with metal fasteners used to adjust the waistband. Extra buttons are sewn onto the outside of the waistband. A zipper fly is on the front of the trousers. Pockets consist of two hip with button down flaps, two lined side and one left leg cargo with button down flap. A light khaki heel protector is sewn into the hem of each trouser leg.On white calico manufacturer's label - handwritten in black ink: '556101, PADRE Tom'.uniform, army chaplain, battle dress, major thomas b. williams

Khaki short sleeve shirt. Warrant officer Class 1 patch sewn onto each sleeve.Cloth patch sewn to inside back of shirt with name of manufacturer, size of garment.

This item can be seen as a hand piece belonging to a logger or farmer spanning over one hundred or more years. The equipment was made to perfection as a hand tool and has not been improved upon since its introduction into the logging industry or farming fraternity. It can be used by one person or two (husband and wife or father and child). Its versatility is ageless. It can be used for domestic clearing of the paddocks, or for domestic fire places and stoves or commercial logging up until the 2000s (introduction of specific logging trucks that cut and treat the trees in one process).This item is very significant to the rural and logging regions within the Kiewa Valley. It has been used for domestic wood cutting and for industrial logging in the mid to late 1900s. It was used when clearing land for the SEC Hydro scheme and to allow for the introduction of the Mount Beauty construction workers' village (later developed into the town) The great advantage of this saw was that it uses only muscle power and can be located where ever a lumber "Jack" or property owner can venture. either by foot or by horse.This saw is a Warranted Superior One/Two Man Logging Saw. It has 68 teeth and is 42 inches long. At a position of one inch (2.5cm) from the end is a hole one inch down from the leading edge. There is another hole 45 cm in front of the handle. Both these holes are for a "helper handle" which when in use renders this logging saw fit for a two man operation. This is a cross cut saw for cutting down vertical trees (horizontal cut) The handle is made from wood and fastened to the blade by three heavy duty screws. The one helper handle stands 150mm high and has a 150mm wooden hand grip.The central screw has 25mm manufacturers' identification logo stamped "WARRANTED SUPERIOR".one or two man cross cut saws, forestry, timber industry

Emerald Football Club won the district Premiership in 1931, and had this photograph taken by Ferdinand ("Freddy") Woermer, whose stamp is on the reverse of the mounting. Woermer lived in a humpy on the Monbulk-Seville Road, Silvan (then Burleigh), and worked around the district as a professional photographer. He used a hollowed tree stump as a dark room for developing photographs.This photograph has double significance. On the one hand, it depicts the premiership team members in 1931. On the other, it is the work of F Woermer, a figure of some interest in the area.B/W photograph of the 1931 Emerald Football Club Premiers team, 22 people in all. Woodlands in background. Photo is glued to heavy cardboard.Rear: Stamp of manufacturers "F Woermer, Silvan Vic" and handwritten date "1931"emerald football club, woermer

This strong, heavy bank safe was made by W. Marr in London. It was formerly owned by the ANZ Bank in Portland, Victoria. Portland’s ANZ Bank was originally a branch of the Bank of Australasia, which first came to Australia in 1835, opening in Sydney. Portland’s Bank of Australasia began in a bluestone building built on the north corner of Julia and Bentinck Streets by stonemason William Robb in 1855, around the time of Australia’s Gold Rush. Eventually, in 1951, the Bank of Australasia merged with the Union Bank to become the Australia & New Zealand Bank, known as the ANZ. Portland’s branch of the Bank of Australasia then moved into the old Union Bank building at 44 Percy Streets; both bank buildings were built around the same. The maker of this safe, W. (William) Marr, obtained a patent in 1834 for what is believed to be the first fire-retarding patent, building this into the lining of strong boxes. Others made further design improvements such as hardening the metal plates used to make the boxes. In about 1840 Thomas Milner, a Sheffield tinsmith, made the earliest safes that could safely protect their contents from a surrounding fire. This was achieved by including tubes of a substance between the inner and outer walls of the safe that would react to the heat and the contents would put the fire out. In 1851 an Exhibition at London’s Crystal Palace included fire-proof safes from different vendors. William Marr was listed under Fireproof Box Makers in the 1842 London Trades Directory, at 33 Broad Street, and 52 Cheapside. William Marr & Son were appointed to supply Her Majesty’s National Debt Office and other departments in 1860, with the address 9 Walbrook, Vulcan Safe Works, Skin Yard, Bankside, Southwark, London. 1n 1870 the address for William Marr listed under Safe Makers and Agents in the London Trades Directory was 67 Cannon Street. The manufacturer, W Marr, is significant as an inventor of a way to make a strong box fireproof, then patented his secure safe. This invention indicates that security of money was of great importance in the mid-1800s as it continues to be today. The secure safe would have given much comfort to those with investments and savings, as well as to the bank itself, the custodian of other people's money. This safe was made in London and exported to colonial Australia, giving significance to the safe as an item that was high in the list of the needs of the early Australians and their businesses. The safe has local historical significance as it was used by the original Bank of Australasia in Portland, which was built in 1855 and went on to become the ANZ Bank, still in operation today. The bank was an integral part of the establishment and growth of commerce in Colonial Victoria.Safe; heavy metal bank safe, painted green. Double doors each have top and bottom external hinges, and two front panels; the top panels are arched. The thick doors have five sliding locks. Inside is a fixed metal compartment with a locked sliding metal drawer, and several fitted shelves plus some temporary removable shelving. Both doors have a decorative brass knob near the centre opening. Left door has an oval artificial keyhole and a space where another fitting has been attached. The right door has a second brass knob and an oval keyhole. The top panels of the left door has an oval plaque with an inscription; the right door has evidence that there was an oval attachment. Made by W. Marr, London.Text embossed on plaque: "W. MARR / PATENTEE & MANUFACTURER / 52 / /CHEAPSIDE / LONDON" flagstaff hill, warrnambool, shipwreck coast, flagstaff hill maritime museum, flagstaff hill maritime village, maritime museum, great ocean road, shipwreck artefact, safe, bank safe, vault, security, finances, anz bank, portland bank, w marr, william w marr, financial institution, savings, gold exchange, loans, investments, safety, safe maker, lock maker, iron box, strong-room

The item is a kerosene marine ships lamp used onboard ships and smaller vessels for general lighting and navigation the subject lamp was made in Melbourne by a known maker James Paterson. The writer at this time cannot ascertain any significant historical information regarding the company or its founder, however lamps made by James Paterson of Melbourne are rare and regarded as collector's items and would command significant sale prices. All that is currently known is that the James Paterson Lamp manufacturing company were located at 30 Little Collins St Melbourne, and were active in Dec 1885 and in 1886 from newspaper articles of the time. Therefore the assumption is that the subject lamp was made in the late 19th to the first quarter of the 20th century.A significant item used in the marine industry on many ships, the company made kerosene lamps for other industries as well and was a well-known Melbourne based company in the late 19th and early part of the 20th centuries.Marine masthead copper ship's lamp with a handle at the top and holders at the side. It has a lamp glass and reflector mounted on a removable fuel tank. It was made in Melbourne by James Paterson.Stamped James Paterson Lamp Manufacturer 30 Little Collins St Melbourneflagstaff hill, warrnambool, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, lamp, masthead brass ship's lamp, masthead lamp, james paterson, marine kerosene lamp

The invention of the Coolgardie Safe is credited to Arthur Patrick McCormick, a contractor in Coolgardie, and later the Mayor of Narrogin. Coolgardie is in the Eastern Goldfields region of Western Australia. Gold was first discovered there in 1892; the townsite became a municipality in 1894, and by 1898 its population of 15,000 made it the third largest town in Western Australia after Perth and Fremantle. In the last decade of the 19th century, Coolgardie was the capital of the West Australian goldfields. Being 180 kilometres from the nearest civilisation, food supplies were initially scarce and expensive. As fresh food was a valuable commodity there was incentive to preserve it, and keep it out of reach of scavengers such as birds, dingos, dogs, ants, and flies. It was in an effort to do this, in the extreme heat of the Australian Interior, that McCormick came up with his design for the Coolgardie Safe. McCormick noticed that a wet bag placed over a bottle cooled its contents. He further noted that if this bottle was placed in a breeze, the bag would dry out more quickly, but the bottle would get colder. What McCormick had discovered was the principle of evaporation: ‘to change any liquid into a gaseous state requires energy. This energy is taken in the form of heat from its surroundings.’ Employing this principle, McCormick made a box for his provisions which he covered with a wet hessian bag. He then placed a tray on top, into which he poured water twice daily. He hung strips of flannel from the tray so that water would drip down onto the hessian bag, keeping it damp. As the water evaporated, the heat dissipated, keeping the food stored inside cool and fresh. The success of McCormick’s invention would not have worked without a steady supply of water. Fresh water was scarce in the eastern goldfields at this time but the demand for water from a steadily growing population encouraged innovation. The solution was to condense salt water. Heating salt water in tanks produced steam that was condensed in tall cylinders, cooled and then collected in catchment trays. By 1898 there were six companies supplying condensed water to the goldfields, the largest company producing 100,000 gallons of water a day. In the early 20th century, Coolgardie Safes were also manufactured commercially. These safes incorporated shelving and a door, had metal or wooden frames and hessian bodies. The feet of the safe were usually placed in a tray of water to keep ants away. (MAV website) The early settlers of Moorabbin Shire depended on this type of Food Safe to protect their food from flies and vermin as they established market gardens in the fertile area around the notorious Elster Creek A metal framed, 4 sided structure standing on 4 legs with 2 hinged doors on one side, a metal tray at base of food safe and a metal cover over top. Ridges on which to rest trays carrying food are inside safe. The Safe is enclosed by fly-wire mesh.'...IN.....GEELONG' A manufacturer's oval metal plate is embossed on one side of Safe but it is illegible.elster creek, moorabbin, brighton, dendy's special survey 1841, market gardens, infant mortality, disease, cemeteries, fruit, vegetables, pioneers, coolgardie safe, mccormick arthur patrick, dendy henry, vaccination, jones martha, jones ethel may

The Protestant Alliance Friendly Society of Australasia registered under the friendly societies statue. Grand council Victoria. Presented to past mistress sister. Mabel. M. Goodridge of Loyal Red Rose Lodge. No 18. On the 23rd day of november 1912. Signed by. Ella Price - WM. G.Biggs - WGM. Bella Rolls - DM. Ernest.W.Edmonds - DGM. Jane Miller - Sec. John Callaghan - Gen Sec. Top centre. Holy Bible. Large eye. 2 angels each side. Black & white photos of Luther. Galvin. Knox. Cranmer. Bottom left and right. Crown on book. 1. This we will maintain. 2. Let brotherly love continue.Picture frame manufacturers. The Fine Art Gallery. Mitchell street Bendigo. ( 1871 )person, individual, female

Leather strop enclosed in red and white box.Valet strop made by the manufacturers of the Valet Autostrop Safety Razor British Made.personal effects-toilet requisites, shaving

In an era when drinking beer was considered safer than drinking water, pubs were prolific and the centre of social and commercial life in Bendigo. (Bridgfoot,J. Taverns to Temperance: Pubs in Bendigo). While the Cohn Brothers and their 'tied hotels' and were one of the most successful brewers in the district, many smaller brewers also existed and the industry was a major source of employment. C.J. Glover or Charles Runting appear to have been in one of those.Oval beer bottle label. Multi coloured print featuring images of hops, a glass of ail, the Bendigo Coat of Arms and various font styles.Glover & Runting / Tonic Ale / Manufacturers / Chapel St / Bendigo / Vic Australiamaking a nation, city of bendigo commerce

Part of Kyneton Fire Brigade trophy collectionPart of Kyneton Fire Brigade trophy collectionCut crystal bowl, star pattern on base, leaves and flowers on sides, scalloped edge at top. Manufacturer's sticker on side of bowl: Bohemian / Hand / Cut / Crystal / Made in Czeckoslovakia. trophy, kyneton fire brigade, country fire authority, fire brigade demonstrations

Heidelberg Golf Club members' tie with logo.One of a collection of various HGC members' ties.Navy blue necktie with diagonal stripes and single HGC logo repeated over tie..Manufacturer's tag on back of tie: "Holly Green, Made in Australia", "100% polyester"heidelberg golf club, memorabilia, vic mcgavin, neckties, club ties

Heidelberg Golf Club members' tie with logo.One of a collection of various HGC members' ties.Solid navy necktie with letters "HGC" embroidered in gold.Manufacturer's tag on back of tie: "Tee Dee Made in Australia", "100% polyester"heidelberg golf club, memorabilia, vic mcgavin, neckties, club ties

Heidelberg Golf Club members' tie with logo.One of a collection of various HGC members' ties.Navy necktie with 2 yellow and red diagonal stripes and single HGC logo.Manufacturer's tag on back of tie: "Holly Green. Made in Australia. 100% polyester"heidelberg golf club, memorabilia, neckties, club ties

Heidelberg Golf Club members' tie with logo.One of a collection of various HGC members' ties.Black necktie with 2 yellow and red diagonal stripes and single HGC logo.Manufacturer's tag on back of tie: "Holly Green. Made in Australia. 100% polyester"heidelberg golf club, memorabilia, neckties, club ties

Heidelberg Golf Club members' tie with logo.One of a collection of various HGC members' ties.Black necktie with multiple yellow and red diagonal stripes and multiple HGC logos.Manufacturer's tag on back of tie: "Holly Green. Made in Australia. 100% polyester"heidelberg golf club, memorabilia, neckties, club ties

Uniform issued to "LOCKYER" 114493.Jacket - khaki colour wool/polyester fabric. Service dress style, gold colour plastic buttons with metal shank and split ring. Buttons have raised emblem of Queens crown, crossed swords and Kangaroo. Royal Australian Army. Collar, shoulder epaulettes, four front pockets, top two with button and two metal studs on flap, lower button down flap. Green colour polyester fabric lining with white cotton manufacturers labels inside right.Manufacturers information on labels - black ink print faded to light grey/blue. "RUSS JOHNSTON/ -TAILOR- /VIC^ 1989/90/ DEN 8405-66-019-8188/ DRYCLEAN ONLY/ REPRESS USING IRON AND DAMP CLOTH/ OR MEDIUM TO HOT STEAM IRON/ CREASE UPPER HALF OF LAPELS ONLY" "REGIMENTAL NO./NAME" Handwritten, blue ink pen "LOCKYER". uniform, army, service dress, lockyer

Two-part object. (1) A Dunlop 'Lady Maxply Fort' model tennis racquet, with whipping on shoulders & shaft, handle wrapped in Dunlop-branded leather, and a plastic butt cap impressed with manufacturer logo. Model name on base of head/throat on obverse; manufacturer name on base of head on reverse. Wilson branded strings. Handle has original plastic packaging wrap. (2) White vinyl racquet head cover with silver zipper, and printed with manufacturer logo and name in blue & red. Materials: Wood, Vinyl, Adhesive tape, Leather, Ink, Plastic, Painttennis

A Wright & Ditson 'Surprise' model tennis racquet. Throat wedge has marble laminate. String whipping and red plastic around base of throat featuring retailer's decal with trademark on obverse. Model name printed across throat on obverse and manufacturer's trademark/logo features on shaft on reverse. Manufacturer name and country of origin printed on right side of shaft. Fine-grooved octasgonal handle with leather end wrap. Butt cloth features manufacturer's trademark and name. Initials: J.Q. written on shaft. Materials: Wood, Metal, Lacquer, Glue, Ink, Leather, Gut, Clothtennis

Cordial came in bottles bought at the local grocery store or at a large city store on a shopping expedition. The shape of the bottles changed as did the stopper used to seal it. Bottles were re cycled remaining the property of the manufacturer. History of Brookes Lemos ltd.Historical: Change of Bottles - shape, glass, stopper, embossing. Bottle collectors. Aesthetic: Display showing embossing and shape Clear glass bottle curved on 1 side with criss cross pattern two thirds of the way up surrounding a clear oval shape with narrower ends top and bottom. The other side is made up of 3 flat 'pieces' each with print in capital letters, heavily embossed. On 1 of these flat sides below the writing is the 'outline picture' of a 'boy' holding a similar bottle. Above these sides the bottle becomes round and tapers with vertical embossing to a double lip, a neck and then another double lip with a screw for the top.Printed from top to bottom: 1 flat side: 'Regd Design No 9072 Australia No 8449 India / No 689933 Great Britain No / 1926 Union of South Africa / No 57737 U S America No 1921 New Zealand Regd 1925 Canada / Only Contents Sold'. Middle flat side: 'Brookes Lemos Limited / Manufacturers of / Lemos / Registered Trade Mark' Third flat side: 'This Bottle is the Property / Brookes Lemos Limited and / Cannot be Legally Used / By Others For Any Purpose.' Also outline picture of boy Base: 'F380'cordial, drink, bottle, brookes lemos ltd.

Pittock collection: two steel hand operated punches for leather work * steel hand punch, 190 mm L x 85 mm W, manufacturer's mark not clear Moorrville Pty Ltd * steel tool with guide, 190 mm L x 85 mm W, no manufacturer's marks Items stored in Pitchfork coach builder's box, reference 13000.1.

Brown cardboard box with sliding insert containing hypodermic needles. On the front of the box is a buff coloured manufacturer's label with rust coloured print. On the rear of the box is a white coloured manufacturer's label with rust coloured print. The box has a thin strip of rust coloured plastic all the way around it. The insert has allocation for six needles but there are only four present.Stamped in black ink on front of box: EXPLORING / 19 B.W.G. 3 INCH •Stamped into metal at flat of connector: ARNOLD / SShypodermic, needle, syringe, john bell & croydon, arnold & sons