An ink bottle was made of glass or ceramic and typically sat on a desk. The writer would dip the pen (or quill) into the bottle to put more ink on the pen. Because they sat on a desk, ink bottles were often decorative. We have mostly dispensed with ink bottles and quills. This item is an example of early stationery equipment commonly used in schools, households and commercial enterprises.A squat clear glass ink bottle which is square-shaped. It has threaded top and is seamed on both sides.on base - AGM F823 M P50container bottle ink-bottle

This glass jar is an example of a food container used in the first half of the 20th century.A small clear glass jar with a screw thread top. It would have been a food container.F 1098 AGM M 816glass-jar bottle-food-container

Agee Victory glass preserving jar with glass lid, wire clips, paper instructions & rubber sealing ring.M813 M AGM Agee Victory

Document. AGM President's Report and Financial Report for 2007 for the Friends of the Bendigo Cemeteries. Two Pages.document, memo, agm report.

A clear glass bottle. It has one flat side and a screw thread. The lip has been chipped.On base - S 193 AGM 926 2glass-container bottle australian-glass-manufacturers

Half pint glass milk bottle - Australian Glass manufacturer - No Deposit No return - AGM M18 PBM -227milk bottles, 1/2 pint bottle, agm

Soft drink came in bottles bought at the local grocery store or at a large city store on a shopping expedition. The shape of the bottles changed as did the stopper used to seal it. Bottles were re-cycled remaining the property of the manufacturer. History of Cohn Bros., Bendigo & Swan Hill.Historical: Change of bottles - shape, glass, stopper, embossing, use. Aesthetic: Display showing embossing & shape especially if in good condition.Clear glass bottle. Bottom half has straight sides. The top half tapers to the top where a metal crimp fits over the lip. Manufacturer's name is embossed in print in block letters with its logo just above halfway from the bottom. At the base on the sides is embossing in capital letters around the circumference. The base is embossed with the crown seal of AGM.On 1 side half way up is embossed - Cohn / circle with CB inside around top of circle is Bendigo and around bottom of the circle is Swan Hill / Bros.is on the other side of the circle. - On the other side is embossed - The property of the Cohn Bros. Vic. Bry. Co. Ltd. Bendigo & Swan Hill. At the base - F1449 AGM (crown seal) M 2glass, bottle, domestic, household, drinks, lemonade, cohn bros., swan hill, bendigo

Record of AGMs, committee meetings and general meetings of Ringwood Artists from AGM 12-May-1975 to AGM 4-Mar-19851. minute book of Ringwood Artists from 12 May 1975 to March 1985. Book 1of 3 +Additional Keywords: Barnes, John (Life member) / Grayling, Pauline

Has a strong association with the BTM membership, being photographed at an AGM.Laminated A4 colour print of the 2006 AGM with No. 40 in the background. Features many BTM members. Photo Carolyn Dean?trams, tramways, btm, agm, depot, tram 40

Friends of the Bendigo Cemeteries inc. President's reports delivered at the AGM's of 199-1998-2001-2003- 2004. Five Copies.clubs and associations, history, friends of the bendigo cemeteries

This bottle comes from the chemist’s business in Timor Street Warrnambool of R.F.Kennedy & Co. Richard Frank Kennedy came to Warrnambool in 1880 and established a retail, wholesale and manufacturing business in Timor Street. The business was described in the 1904 ‘Cyclopedia of Victoria’ as the largest and best-appointed pharmacy in Victoria. Kennedy was prominent in community affairs in Warrnambool, being a Town Councillor, a Justice of the Peace, and on the committees of the Warrnambool Hospital and the Mechanics Institute and Art Gallery. He was the first Vice-President and fourth President of the Warrnambool Bowls Club. After Kennedy’s death in 1903 the pharmacy business continued as a company and this bottle comes from that time. The Kennedy chemist bottles were well-known for their lighthouse logo (Warrnambool having two operating lighthouses during the company’s time, with these still operating today).This bottle is significant as an example of a chemist’s bottle from R.F. Kennedy & Co. This pharmacy was a dominant business in Timor Street, Warrnambool for over 40 years. This is a small clear glass bottle with a rectangular-shaped body with rounded sides, a small neck and a moulded open top. The stopper is missing. The chemist’s name and a lighthouse logo are etched into the side of the bottle. ‘R.F. Kennedy & Co Chemists Warrnambool’ ‘M297 AGM’ r.f. kennedy, warrnambool chemist, history of warrnambool

Ref: Yarra Ranges Regional Museum. M. Balfe Prim Prod Person Bottle 3.5cm (height) x 6cm (width) Bottle of Balfe Black and Colors for Straw Hats. BALFE BLACK AND COLORS FOR STRAW HATS NOTE - CAREFULLY READ DIRECTIONS ON THE SIDES OF THE BOTTLE. FOR ALL STRAW HATS USE ALL CHIP HATS DILUTE THE PREPARATION WITH US/OWN BULK OF METHYLATED SPIRITS OF WINE M. BALFE'S BLACK OR COLORS. Trademark Rectangular aqua tinted clear glass bottle with wide neck. Panels impressed on three sides, one with text embossed, monogram embossed on base.On side panel 'M. Balfe'. AGM monogram on base.dye, straw hats, balfe

Digital Image of parts of the BTM AGM at the VRI Institute building on 3/10/2004. .1 - AGM General view. .2 - Richard Gilbert and Peter Winspur at the table. .3 - Richard Gilbert and Andrew Mitchell - 25 year member .4 - Richard Gilbert and John Phillips - 25 year membertrams, tramways, btm

Colour postcard, of BTM trams 26, 27 and 28 in front of the depot fan on the day of the 2016 BTM AGM by Peter Waugh.trams, tramways, btm, depot, tram 38

Demonstrates the production method of the BTPS documents, yields information about the BTPS forms and methods and has a strong association with the author of the time.Original copies of the BTPS forms and documents used in printing copies for members. Prepared by Warren Doubleday at the time . Printed by a laser printer or a dot matrix printer and or photocopied. At the time, these were then photocopied to produce the final copies. .1 - Membership Renewal 1990-91 .2 - Proxy form for the 1992 AGM .3 - Membership application form 6/1991 .4 - Minutes of the BTPS 1991 AGM - 2 sheets .5 - Form for the purchase of the 21st anniversary video - Ballarat Tramway's with corrections - would have been reprinted. .6 - Minutes of the BTPS 1990 AGM - 2 sheets .7 - Minutes of the BTPS Co-Operative 1990 AGM .8 - BTPS Collection Policy May 1992 - 4 sheetstramways, trams, btps, forms, collection management, minutes

This is an example of a container commonly used in homes in the early to mid 20th century. A large brown glass vinegar bottle. It has a long neck and is textured glass with a smooth rectangle on the front for labelling. It possibly had a cork top seal.on front - in rectangle "VINEGAR" on base - AGM and logo F317 M/container bottle-vinegar agm

Small clear glass bottle with a small piece missing from rim. It has a mould seam from the rim to the base.On the base - AGM G inside an A M G 322 Mbottle container australian-glass-manufacturers glass

This baby’s feeding bottle was made by Agee (Australian Glass Manufacturers) and marketed by the Crown Crystal Glass Company. It is made of pyrex which is a brand of glass first produced by Corning Inc. of America in 1908. Pyrex is a clear low-thermal-expansion borosilicate glass used for laboratory glassware and kitchenware. The use of pyrex bottles became more prevalent in Australia in the second half of the 20th century and baby’s bottles made of pyrex were popular as they were easily sterilised in the home environment. This baby’s bottle has no known local provenance but it is retained because it is a good example of the advancement in infant health and welfare over the past 80 years. This is a baby’s feeding bottle made of glass (pyrex). The body of the bottle is hexagonal-shaped (circular with rounded edges). It has a circular-shaped neck and an open top with a moulded glass around it. The bottle has no feeding nipple or stopper. There are measurement marks on the side of the bottle up to 8 ounces. ‘The Ideal Agee Pyrex Feeder’ ‘AGM 1S 1561 6’ infant welfare, history of warrnambool

This baby’s feeding bottle was made by Agee (Australian Glass Manufacturers) and marketed by the Crown Crystal Glass Company. It is made of pyrex which is a brand of glass first produced by Corning Inc. of America in 1908. Pyrex is a clear low-thermal-expansion borosilicate glass used for laboratory glassware and kitchenware. The use of pyrex bottles became more prevalent in Australia in the second half of the 20th century and baby’s bottles made of pyrex were popular as they were easily sterilised in the home environment. This baby’s bottle has no known local provenance but it is retained because it is a good example of the advancement in infant health and welfare over the past 80 years. This is a baby’s feeding bottle made of glass (pyrex). The body of the bottle is hexagonal-shaped (circular with rounded edges). It has a circular-shaped neck and an open top with a moulded glass around it. The bottle has no feeding nipple or stopper. There are measurement marks on the side of the bottle up to 8 ounces.‘The Ideal Agee Pyrex Feeder’ ‘AGM 1S 1561 6’ infant welfare, history of warrnambool