Used for weighing bullocks. Can weigh up to 500lbs. Can be turned upside down for extra weighing facility. Information from Lyle Ruddell of Toora when visiting Common School Aug 1986Scales consisting of long metal bar with pear shaped weight attached, with hooks (3) for hanging item to be weighed. Weights and measures approval circular spot near numberweight measurement, cattle, lyle ruddel, bullocks

Last used in a Physics 2 experiment in the 1940-50s. Refer to the printed version Part 2 Laboratory Manual (ed. Natalie Allen) for further details. Likely acquisition in early 1900s by Lyle?? (Research on instrument makers catalogues has not been undefrtaken Photographed June 2003 (Nicola)

Certificate of Examination for #64 of one 6 inch glass scale, one 6 inch steel scale, and one 6 inch end gauge for Professor Lyle. 3 page document (copy) from National Physical Laboratory, Teddington. Paper held together with pin. (See also #63)

Arthur Davis on Tuppy at the old Stable, 1920. Note the hitching rail and post and wires on windows to deflect bees(?) - flying objects. Part of a set of 15 Black & White photographs from Lyle Caffin re her family at Winson Green Road, Canterbury. Copied by Jan Pigot, 1991.canterbury, winson green road, caffin family, davis> arthur, horses, stables

U.S. Bureau of Standards Certificates for #65 for 6 inch steel scale, 6 inch steel end measuring rod, 6 inch glass scale. Three Department of Commerce Bureau of Standards certificates submitted by Professor Lyle for scales made by H.J. Grayson. Held together by paper clip. (See also #62)

Made by Henry Grayson at home with the help of William Stone. Used to rule diffraction gratings, achieving excellent results of 2cm squared rulings on speculum metal. The instrument was transferred to Melbourne University, and used by Professor Lyle from 1917-30. Information attached to the front of object and statistical information on stand on top of object.Grayson Diffraction Grating Ruling engine consisting of multiple complex chrome and brass components. Enclosed in specially made glass and wooden display box.

The investigation of the x-ray appears early on to have been a priority research topic at the University of Melbourne’s School of Physics. This interest was sparked by the appointment in 1889 of Professor T.R. Lyle. Lyle, who was head of the school until 1915, is thought to have been the first person in Australia to have taken an x-ray photograph. A copy of this photograph can be found in the School of Physics Archive. For this particular experiment Lyle actually made his own x-ray tube. His successor, Professor Laby, continued to work with x-rays. During the 1920s Laby worked on the x-ray spectra of atoms and in 1930 he co-published with Dr. C.E. Eddy, Quantitative Analysis by X-Ray Spectroscopy. Also with Eddy, Laby produced the landmark paper Sensitivity of Atomic Analysis by X-rays. Laby went on to have an x-ray spectrograph of his own design manufactured by Adam Hilger Ltd. (see cat. No. 38). School of Physics, the University of Melbourne Cat. No. 22. Jacqueline Eager Student Projects Placement, Cultural Collections 2005 A modern X-ray tube differs little from the original Coolidge tube. A minor modification is the rotating anode type that extends the life and increases the available power of the tube by presenting a new portion of the anode when required. “P125/20/40/NrF038803 (?) SIEMENS-REINIGER-WERRE AG ERLANGEN Eigen filleung (?) mind. 0,7 mm AL” On rotating shaft: “FO/33803” On cathode: “23C”

The investigation of the x-ray appears early on to have been a priority research topic at the University of Melbourne’s School of Physics. This interest was sparked by the appointment in 1889 of Professor T.R. Lyle. Lyle, who was head of the school until 1915, is thought to have been the first person in Australia to have taken an x-ray photograph. A copy of this photograph can be found in the School of Physics Archive. For this particular experiment Lyle actually made his own x-ray tube. His successor, Professor Laby, continued to work with x-rays. During the 1920s Laby worked on the x-ray spectra of atoms and in 1930 he co-published with Dr. C.E. Eddy, Quantitative Analysis by X-Ray Spectroscopy. Also with Eddy, Laby produced the landmark paper Sensitivity of Atomic Analysis by X-rays. Laby went on to have an x-ray spectrograph of his own design manufactured by Adam Hilger Ltd. (see cat. No. 38). School of Physics, the University of Melbourne Cat. No. 22. Jacqueline Eager Student Projects Placement, Cultural Collections 2005 The original X-ray tubes relied on low pressure operation. The electrons and positive ions are produced in the residual gas. Positive ions are accelerated towards the cathode and release electrons which on hitting the anode produce X-rays. These early gas X-ray tubes operated satisfactory only over a narrow pressure range. Stamped Label: “NATURAL PHILOSOPHY LABORATORY/ No/ UNIVERSITY OF MELBOURNE” Stamped: “90268 M. No. 5171[??]/No. 2156[??]/ M. No. 346585.” x-ray tubes, gas x-ray tube, laby, spectroscopy

The investigation of the x-ray appears early on to have been a priority research topic at the University of Melbourne’s School of Physics. This interest was sparked by the appointment in 1889 of Professor T.R. Lyle. Lyle, who was head of the school until 1915, is thought to have been the first person in Australia to have taken an x-ray photograph. A copy of this photograph can be found in the School of Physics Archive. For this particular experiment Lyle actually made his own x-ray tube. His successor, Professor Laby, continued to work with x-rays. During the 1920s Laby worked on the x-ray spectra of atoms and in 1930 he co-published with Dr. C.E. Eddy, Quantitative Analysis by X-Ray Spectroscopy. Also with Eddy, Laby produced the landmark paper Sensitivity of Atomic Analysis by X-rays. Laby went on to have an x-ray spectrograph of his own design manufactured by Adam Hilger Ltd. (see cat. No. 38). School of Physics, the University of Melbourne Cat. No. 22. Jacqueline Eager Student Projects Placement, Cultural Collections 2005 The original X-ray tubes relied on low pressure operation. The electrons and positive ions are produced in the residual gas. Positive ions are accelerated towards the cathode and release electrons which on hitting the anode produce X-rays. These early gas X-ray tubes operated satisfactory only over a narrow pressure range. Manufacturer’s mark stamped: “PATENTED/ VICTOR/ TRADEMARK/ MADE IN BOSTON U.S.A./ TUNGSTEN” A white circular stamp, stamped near the manufacturer’s mark: “[illegible]TER WIGGH[illegible]” Stamped label: “NAT. PHIL. LAB./ No./ UNIV. OF MELB.” Inscription on the end face of the copper piece: “PAT. SEP 5’ 11 DEC. 30’13/ JUNE 23, 14 NOV. 30.15/ 43835”