Traverse and Elevation Mechanism T&E for the U.S. Browning M1919A4 .30 cal M2 TripodB166489-4, conjoined AD, CSW, A139987, B.195549 2.A, and has graduated markings on two knurled training and elevation nuts.military

All Things Safety Wear sell products including Safety products, Workwear, Screenprinting, Embroidery and Bolts & nutsBusiness card printed both sides in black and yellow; with adhesive sticker printed in black and yellow, one sidesafety products, sherbourne road briar hill

Many farming families in the district kept bees as a source of honey for home consumption. This item was made for use on the family farm. Most of the equipment used in the local industry was homemade.During the early to mid 20th century bee keeping was a significant rural industry in Dunkeld and surrounding districts. It is believed that there were nearly twenty apiarists operating in the area. Honey in large quantities was railed to Melbourne for sale.Homemade bee smoker consisting of a copper cylindrical firebox and rectangular bellows constructed of wood and leather. Components are assembled with rivets, scrap wire, sheet metal, nuts and bolts and nails.

Bow saw wooden frame and handles. One handle longer than the other. Tension rod has wing nuts each end. 55cm(l) x 28cm (h)flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Telescope stand, 4 legged adjustable stand with joining wooden bar. Adjustment made by loosening wing nuts. Has "W D McDonald" written faintly on cross bar.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Spanners are used to tighten nuts of different sizes. These spanners are large and were used on larger items eg. H.V. McKay machinery. Used by residents of the Kiewa Valley.Both spanners are straight and made of steel. The 'H.V. McKay' spanner has '824' on the back (at the 'knob' end) and has a 'knob' at one end. The other spanner has the same type of opening at each end (no knob) and has embossed '55A' on one side at one end.H. V. McKay embossed (at the knob end) on one spanner and 824 on the back of it. 55A embossed on one side of the other spannerspanners, h.v.mckay

It was made late 19th Century.A medium sized steel curved handled double headed plough spanner made by a blacksmith. It was used to tighten or loosen large nuts on a plough or other machinery. It was used in the late 19th century.spanners, wrenches, tools, farm equipment, steel

It was made late 19th Century at the Golden city co. in Bendigo Victoria. It was supplied with Golden City's One Way Disc Cultivator.A steel curved handled double headed plough spanner made by Golden City Co. in Bendigo. It was used to tighten or loosen large nuts on a plough or other machinery in the late 19th Century. spanners, wrenches, tools, farm equipment, steel

Instructions for the use of Non-Fire Decal with five Wildflower Bouquet decals. The decals have Sturt's Dessert Pea, Banksia, Kangaroo Paw, Flannel Flower, Wattle, Bottlebrush, Heath? And Gum Nuts.ephemera, mementoes, flower decals, peter ellis collection, wildflower bouquet, decal

In 1937 the Moffitt family lived at 8 Rosemont Street, Surrey Hills, having lived in Station Street, Box Hill prior to Surrey Hills. Mr Frank Moffitt was a green keeper. Sculptor John Kendrick Blogg of Albany Crescent, a member of the Surrey Hills Bowling Club, carved many such trophies which included eucalypt leaves and presented them to the Surrey Hills Bowling Club as trophies. Mary Ethel Rae was Frank Moffitt's wife. Frank's daughter Beryl and son-in-law Wes Lobb, were Cub Leaders in Camberwell North.A carved trophy for the S.H.B.C. Billiard Tournament by John Kendrick Blogg. Was won by F. B. Moffitt. It features some gum leaves and nuts and a banner across the top with 'ribbons' hanging from the banner. surrey hills bowling club, games, sport, billiards, lawn bowls, awards, rosemont street, surrey hills, albany crescent, john kendrick blogg, frank blackall moffitt

Certificate issued by " EDUCATION DEPARTMENT/ VICTORIA" Title "YOUNG WORKERS" "PATRIOTIC GUILD" Issued to "ELAINE GUNNELL/ EAGLEHAWK/ 210" on "19th July 1944". Certificate - light weight cardboard, with dark brown print on stylised scroll and illustrated in colour with gum leaves and gum nuts in background, lower foreground, two school pupils. Education Dept, Victoria crest at top.Certificate inscription - black (typed) ink "ELAINE GUNNELL/ EAGLEHAWK/ 210/ 19th JULY, 1944" Handwritten signature by Headmaster in black ink "H A ? LIEGNOR" certificate, ww2, education department of victoria

Black painted tin box. Hexagaonal in shape. Opening at one end for sliding lenses. Wing nuts either side of box. Vent holes in top and bottom sides. Latched back entry, hexagonal in shaperailways, signal, lamp, kerosene

Owned by Helen Gibson, pre-school teacher.Cardboard box printed with 'Six Brown Choicest Muscatels "Cleadon" Brand'. Box formerly contained nuts. Now holds a bundle of silk. Interior lined by lace. Item used by Helen Gibson for teaching purposes.Note inside says 'A product of silk worms'.helen gibson

A wooden tennis racquet press with separaters. It has a brass handle and three brass wing nuts on tightening screws. It is heavy and solid and could hold 4 racquets. It is shaped like a tennis racquet frame. Could be mahogany.tennis racquet-press sport recreation

This wood plane would have been used in the past both in industry and in the home. It is an early example of a plane and has antiquarian interest. This item has no known local provenance but is retained as a good example of a vintage tool used in the past by carpenters and handymen. This is a metal tool for planing wood. It has a rectangular wooden base and two side bars for adjusting the length and angle of the blade. The tool has several metal wing nuts and screws and a wooden handle. The metal is much rusted. ‘Trade Mark 45’carpentry tools, history of warrnambool

It was made early 20th Century.A steel straight handled plough spanner with one curved head and at the opposite end three decorative different sized and spaced heads. It was used to tighten or loosen large nuts on a plough or other machinery in the early 20th Century. spanners, wrenches, tools, farm equipment, steel

Very old. The design of wrenches has varied over the years. This one has a screw/nut that moves the moving jaw towards the fixed jaw.Used by residents of the Kiewa ValleySolid steel. This wrench is a tool used to provide grip and mechanical advantage in applying torque to turn objects eg. nuts and bolts. This wrench is adjustable - by turning the 'nut' in the middle of the tool it allows the 'jaws' of the wrench to open to the required size.adjustable wrench, tool

Demonstrates a conductors communication bell used in Ballarat trams - may have been made either for the SEC or the MMTB. Brass Conductor Communication Bell, consisting of frame, bell, striker, bell pull section, one nuts and two pins. Bell mechanism, note the bell itself covered in SEC Tramway Green paint on one side and the underside.tram, trams, conductors, bell, sec

Standard pattern bayonet for Short, Magazine Lee Enfield Rifle Mk III from 1907 until 1915 . Pattern 1907 Sword bayonet Mk1 with hooked quillon, wooden grips and steel grip screws/nuts. LITHGOW and 7 '19 markings are spurious - hooked quillons were removed from bayonet production in 1915 (Lithgow) and 1913 (England). Crown stamp (King Edward VII Cypher) E R (Edwardus Rex) 1907 7 '19 LITHGOW

The board was probably from the School of Mines Library, located on the 1st floor of the Administration Building in Lydiard Street. Changes have been made to some times for Tuesday and Friday. The E J Tippett Library was opened in 1978 at the SMB Campus.Wooden board with bevelled and painted edge in blue-grey. Front surface painted black with gold coloured letters and numbers. Two bolts, washers and nuts for fixing, held in position by central wooden strip pinned on back by four screws.ballarat school of mines and industries, library, e. j. t. tippett

This spanner, part of a raker/jointer/guage set which is a sharpening tool for cross cut logging saws. The logging saws used in the early 1900's for the clearing of forests required constant sharpening of their "cutting teeth". The logging of forested areas during these times was very much a "hands on" method of either one or two men by the use of saw or hand axe. Chain saws, chain and ball(clearing) and bulldozing methods came in the mid 1900's.This particular spanner was part of a crosscut saw sharpening tool and method was used by surveyors laying down boundaries for the S.E.C. Victoria Hydro Electricity Scheme (1920's). This item was given to a local Kiewa Valley lad who accompanied the initial surveyors. The lad was responsible for the tendering and feeding of the surveyors "pack horses". Surveys during this period and in the dense mountainous terrain of the Victorian Alps was both exhausting and hazardous. Overnight accommodation at various log cabins was not always possible and swag/tent alternative was the "fall back"This small spanner is part of the Raker/Jointer Gauge saw set and is made from forged steel. The nut grip is of the two tightening nuts on the main construction frame. See KVHS 0090 (A &B) for the other items making up the sharpening tools.hand tool, saw, sharpening method, tree felling.

Given to Acting Captain Austin Appleby by and internee. Used by the Appleby family for over 50 years. Originally sent out by the German Red Cross to POW's and internees in the Tatura area in 1943.Artificial Christmas tree on wooden stand decorated with bells, stars and candles, supplied to Camp 3 by the Red Cross. Inscription on original box: Weihnachtszweige Die "Goldenen Nuisse" sind gefult also knacken 15 stuch. Translation reads: Christmas branches. The "Golden Nuts" are filled, therefore crack (them). 15 pieces.christmas, appleby, red cross, camp 3, german pows, camp 3 tatura

Used in the 19th and early 20th century.A metal scythe with a long curved wooden handle to manoeuvre the blades. There are also two shorter wooden handles or 'nibs' fitted at an angle to suit the user attached to the main handle by a metal ring. It has two curved pointed cutting blades which are attached by nuts and bolts to the handle.agricultural tools, scythes, cutting tools, agricultural equipment

A coolamon is an Indigenous Australian carrying vessel. It is a multi-purpose shallow vessel, or dish with curved sides, ranging in length from 30–70 cm, and similar in shape to a canoe. Coolamons or pitchis were traditionally used by Aboriginal women to carry water, fruits, nuts, as well as to cradle babies. The necessary tools and equipment for hunting, fishing and warfare were one of the very few items that Aboriginals carried with them from place to place. Most were used for a multiplicity of purposes. Because many were made from raw natural materials, such as wood, generally only partial remains are found today. This container is an example of an implement used by the early Indigenous people of Eastern Australia.A large shallow elongated hand-made wooden receptacle used by Australian aborigines as a container for food and drink or for carrying babies.pitchi coolamon aboriginal container