This photo was most likely taken at the site of the proposed McKay Creek Power Station. Excavation of this site was commenced in 1951 but an access road (a rough, narrow track) was put it in 1948 and widened in 1954. The State Electricity Commission would have milled logs from this area at their mill at Howman's Gap. The timber was used for building of housing and camps and provided a much needed resource as there was a general shortage of this commodity. The power station was relocated underground owing to repeated problems with landslides in the area. Restricted financial resources and the repositioning of the power station retarded construction activities and it was not completed until early 1961. An historical pictorial record of the type of machinery used in the 1950's - logging truck with bogie attached, the bull dozer and winch for hauling logs to the truck and note the lack of protective clothing!Black and white photograph showing a logging truck, bogie and bull dozer with winch for hauling the logs to the truck. Two men are on the truck, a driver on the bull dozer and a large log on the bogie. Hand written on the back of photo "Logging at McKay Creek".logging, mckay creek, timber, machinery

Winch Tool to pull tree stumps. Steel frame, two steel wheels, a cable drum and a large steel handle. Handle fits on square shaft of drum and ratchet arrangement

Digital Photo taken from glass slide by Geoff McMillan, Cooper Street Stawell and reproduced as a photo - printed at Stawell Historical Society 2019Black & White Photo 3 Men on a horse drawn cart loaded with barrels of grapes and a man in the left winching the barrels up - at Henry Best's Concongella vineyard, Great Western winery, wine making

Colour photograph showing rusted remains of the grab winch. Part of the overhead gantry system designed to lift huge precast concrete blocks in construction of piers. Lakes Entrance Victoriaislands, waterways, public works, boats and boating

A snatch block is a heavy-duty pulley inside a metal casing. It is primarily designed for handling heavy goods, working as a pulley point that can redirect the course of a winch line. Snatch blocks are also used to increase the lifting or pulling capacity of wire hoists and winches. There is no history or manufacturing provenance currently available.The subject item at this time cannot be associated with an historical event, person or place, provenance is unknown, item is believed to have been produced in the first quarter of the 20th century.Snatch block, metal, one sheave, with a large hook that has a hole drilled through its tip.flagstaff hill, warrnambool, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, snatch block, metal snatch block, lifting gear, rope pully, marine technology, ship rigging

Crusher plant with walls and winch track right of centre to pull truck to hopper at top.An interesting collection of photographs, the connection to Greensborough remains a mystery. Digital copy of 2 black and white photographs, two of 30 photos of mining operations.Photos have no markings or dates. Donor unknown.tasmania, mines and mining, mining machinery

The Drawings were to be used for manufacture of all the components of the Pikrose engine.Some of the Pikrose Engine was manufactured by Austin Hopkinson and Co. Ltd. The drawings belonged to the SECV and were created in the 1950s. The engine was used in tunnel construction.These drawings were used in the workshop of the SECV during the construction of the Kiewa Hydro Electric Scheme. The engine was used in the tunnel and powered by compressed air.KVHS has the drawings only. Workshop drawings consisting of about 20 paper sheets. Size 2 Pikrose engines powered by compressed air and a winch used to operate a scraper. Used in tunnels of shaft.pikrose engine drawings, compressed air engine, austin hopkinson co. ltd., workshop drawings

Car was built by GM Thailand designed by HoldenDesigned in AustraliaBronze orange body. Roof rack. Snorkel mounted on front panel. Driving lights mounted on roof rack. Winch on front bumper. Off road wheels and tyres. Crew cabin utility vehicleHolden emblem front grille. Z71 4X4 on panel in roll bar. Colorado XTreme on back and both sidesvehicle, holden, off road

This vehicle was issued to 8/13 VMR during 1970s and 1980s for transport and logistic tasks. Part of a collection of 8th/13th VMR officers’ mess property passed to the Regimental Collection during the relocation of the regiment from Buna Barracks Albury to Building 105 North Bandiana in 2000. Part of a collection of workshop manuals and user handbooks relating to equipment on issue to 8th/13th Victorian Mounted Rifles during the latter half of the twentieth century.Buff coloured card soft cover with fabric spine binding being user Handbook Truck Cargo 2.5 Ton GS with winch Aust Nok3. 200 pages. Published by Australian Military Forces 1965.Ink stamp on title page " 8/13 VMR Regimental Collection "

EMB circular No. 45 giving details of their "steel case controllers for tramways, ships winches etc. This type was not used by the MMTB.Yields information about the EMB "Steel case controllers"Document or catalogue circular - 4 pages with two punch holes on the left hand side.tramways, technical information, emb, tramcars, electrical equipment, tram controllers

Bendigo Advertiser "The way we were" from Monday, February 28, 2005. Heyday: the surface view of the test shaft, plant and poppet legs of the government shaft at Fosterville (October 1900-April 1903). A pumping plant and winch were purchased from the Tyson's Reef Mine for 900 pounds and removal and assembly cost 723 pounds. Arrangements were also made with the North Stewart Company for the loan of poppet legs, the steam winch engine and buildings. The closing of the shaft led to the exodus from Fosterville.newspaper, bendigo advertiser, the way we were

This vehicle was issued to 8/13 VMR for transport services in 1970s and 1980s. Technical manuals and User Handbooks were essential equipment for Royal Australian Electrical and Mechanical Engineers (RAEME) tradesmen permanently attached to Armoured Corps regiments as Light Aid Detachments (LAD) or AFV Workshops and were responsible for repairs and maintenance of a nature beyond the expertise of AFV crewmen and just short of major rebuilds undertaken by Base Workshop detachments.Part of a collection of workshop manuals and user handbooks relating to equipment on issue to 8th/13th Victorian Mounted Rifles during the latter half of the twentieth century.Maroon stiff vinyl covered Technical Manual being User Handbook Truck Cargo 2.5 Ton GS 4 x 4 with winch. Published by Australian army 1967. Covers and pages secured with metal fastner.Ink stamp on title page " 8/13 VMR Regimental Collection "

This vehicle was issued to 8/13 VMR in 1980s and 1990s for recovery purposes. Part of a collection of workshop manuals and user handbooks relating to equipment on issue to 8th/13th Victorian Mounted Rifles during the latter half of the twentieth century.Maroon coloured stiff vinyl covered Technical manual being User Handbook Truck Wrecker 5 Ton GS with winch. Bound with metal screws. 102 pages. Published by Australian Army 19 February 1974.Ink stamp on title page " 8/13 VMR Regimental Collection ."

Set of 11 No. 35mm Agfa colour blue and white plastic mount slide - of the move of Ballarat trams 27, 28 and 14 from the old SEC depot onto the temporary access track to the BTPS depot on Saturday 15 July 1972 and Sunday 16 July 1972 (slides .10 and .11) .1 - John Withers and his land rover, towing No. 14 from the old depot - depot junction. .2 - No. 27 moves from Wendouree Parade onto the depot access track. .3 - ditto .4 - and onto the access track being pushed by hand. .5 - No. 28 being lifted onto the steel channels in order to slew it across Wendouree Parade .6 - being slewed across the road .7 - being readied to lift up onto the access track .8 - all three trams on the access track that evening. .9 - ditto Taken on 16 July 1972 .10 - No. 27 being winched up to the level crossing - Campbell Duncan ? on the winch. Note the mud! .11 - No. 14 being winched up the temporary access track - Rolf Jinks on the Winch. See Fares Please!, September 1972. tramways, trams, depot, btps, moving trams, wendouree parade, tram 27, tram 14, tram 28

6 certificates awarded to S.Winch for vases of cut flowers (23-Oct-1954); equal best exhibit - Fuchsia Section - 12-Mar-1966 (2 certs), Best exhibit Fuchsia Section (13-May-1967), Double Fuchsias 3 varieties (8-May-1971) & exhibit in Fuchsia Section (6-Mar-1971)Set of 6 certificates of Merit for outstanding exhibits at the Ringwood Horticultural & Agricultural Society: 3 buff coloured with blue lettering, 3 white with blue lettering - each with a picture of flowers. +Additional Keywords: S Winch(5) and D HollowayRingwood Horticultural & Agricultural Society Certificates of Merit for outstanding exhibits

A history of the goldfields and mineral districts of VictoriaHardcover. Front cover has an illustration of a miner standing next to a hole in the ground which is surrounded by logs. He is standing on top of a platform made out of planks of wood and he is turning a handle on a hand winch to bring up a bucket.Stamp of the Marysville & District Historical Society Inc / P.O. Box 22 / Marysville 3779gold mining, gold mine, mineral resources, victoria, australia, history, robert brough smyth

Holterman 1874 Photo. Mine commenced 1858. First Mine in Stawell to have a steam driven poppet head. Holtermanns wagon for developing wet plate photographs is partly visible on lower right.Holtermann Black and White photograph of Stawell Mine April 1874. Tramway on left Winch house on right with square chimney. Poppet Head at centre of photo. Two Mullock heaps visible with some men on it as well as men on mine beamsmining

The photograph printed on this postcard comes from the collection of the Mitchell Library in Sydney. It is sepia in tone and depicts seven men standing and sitting around a mine shaft in the Beechworth region. The photograph has been dated to approximately 1872. This period in history post-dates the Victorian gold rushes which occurred 1852-1853 in Ballarat, Bendigo and Beechworth. During this period, in the 1870s, the surface alluvial gold had been discovered and removed from location. Therefore, in order to reach the deeper and less accessible alluvial gold, diggers began to dig shafts into the earth. These shafts sunk below the ground level by 20 to 30 feet and required timber structures around the entrance and winches to bring the paydirt to the top. The top of this wooden structure is visible behind the man standing in the upper right of the image. This type of mining was highly dangerous as mines often caved in which injured the minors and often resulted in death. Thus, following this period, in the early 1900s, miners opted instead for hydrolic slucing which cut away the earth without the devastating consequences of a mine cave in. This particular group of miners appear to have been unable to afford a horse (then worth around 50 pounds) which were generally used at mines like this to help pull buckets attached to ropes up and down the mine. Instead, this group brought the buckets up and down by windlass. The windlass was a wooden structure mounted over the mining shaft and fitted with a hand-cranked winch which enabled the bucket attached to the rope to be brought up and down.Gold was first discovered in Beechworth in Spring and Reid's Creek in the summer of 1852-1853. At its popularity, this region had approximately 8000 people on the gold fields searching for gold on the banks of these creeks. These periods did not require the use of heavy machinery or the digging of deep mining shafts like the one depicted in this image. Therefore, this image has important connotations for the technologies associated with mining during the approximated 1870s when gold was harder to access. This is a later period in gold history which does not fit into the "gold rush" period. Instead, it occurred after the surface gold had disappeared and therefore, is essential for researchers who are investigating the mining techniques and structures used to reach the alluvial gold which was located deeper under ground in the 1870s. This period predates the use of big heavy machinery used to mine in the 1900s which include dredges. Images such as this one can also impart essential information as to the wardrobe and fashion of men during this period. It also imparts knowledge about the landscape of Beechworth which is useful for people researching the environment and impact of gold mining in the north-east region of Victoria. In addition, since this image is a postcard reproduction of an early Australian image which may date to approximately 1990 it can impart knowledge as to the interests of people during this time period when there may have been an increase into Australian history.A sepia tone facsimile of an early Australian photograph (circa 1872) printed as a postcard.Obverse: BEECHWORTH / Victoria, Australia / Reverse: GM 2 3275 / CORRESPONDENCE / AUSTRALIAN / YESTERYEAR / CARDS / ADDRESS / Published by George Symons (057) 65 3240 / THE MINEHEAD C. 1872 / The easily gleaned gold of the early fields did / not last very long. In order to reach less / accessible alluvial gold diggers began sinking shafts as much as twenty to thirty feet down / and the mines required timbering and winches / to bring the paydirt to the top. / This syndicate has been unable to afford the / luxury of a horse (about 50 pounds) and so everything / must go up and down by windlass and rawhide / bucket. / Photo: Mitchell Library, Sydney / A sepia tone facsimile of / an early Australian photographmining album, gold mine, beechworth, burke museum, mine shaft, postcard, australian yesteryear cards, george symons, the minehead, gold fields, alluvial gold, early australia, c.1872, 1872, gold diggers, north east victoria

Poppet Head and Winch House of Federal Mine. Group of 14 men and boys standing in front of mine. George Charles Cox (Sen) fifth from right.Base of Poppet Head and Engine shed with row of 14 men and boys posing in foreground. Chimney stack is behind Poppet Head in photo.stawell gold mining

Owner of tools Jim Gillespie Clayton VictoriaCaulking iron cranked narrow blade set iron used for setting down in seams adjacent to vertical structures such as coamings or winch beds on deck. Although heavily cranked it will be noted the blade edge will be on the centre line of the iron. Maker Ward Sheffieldflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

A black and white photograph of Diggers from 1 Platoon A Coy 8 RAR on Operation Atherton eleven miles west of Nui Dat prepare for winching a wounded mate out of thick jungle. Casualties were one dead and fourteen woundedphotograph, a coy, operation atherton, gibbons collection catalogue, 8 rar, nui dat, diggers, wounded serviceman

This bearing cap is thought to be from a donkey winch engine, (or steam donkey, or donkey winch), which is a small secondary steam engine with a cylindrical shaped boiler. In 19th century merchant sailing a steam donkey was often used in marine applications such as to help raise and lower larger sails, load and unload cargo or to power pumps. The bearing cap could have been used on the donkey engine to hold the rod of the winch gear wheel in place, or bolted to another bearing cap around the neck on the top of the boiler’s cylinder, connecting it to the flue. The Newfield was a three-masted iron and steel barque, built in Dundee, Scotland, in 1889 by Alexander Stephen and Sons. It was owned by the Newfield Ship Company in 1890 and later that year It was registered in Liverpool to owners Brownells and Co. The Newfield left Sharpness, Scotland, on 28th May 1892 with a crew of 25 under the command of Captain George Scott and on 1st June left Liverpool. She was bound for Brisbane, Australia, with a cargo of 1850 tons of fine rock salt, the main export product of Sharpness. At about 9pm on 28th August 1892, in heavy weather, Captain Scott sighted, between heavy squalls, the Cape Otway light on the mainland of Victoria but, due to a navigational error (the ship’s chronometers were wrong), he assumed it to be the Cape Wickham light on King Island, some 40 miles south. He altered his course to the north, expecting to enter Bass Strait. The ship was now heading straight for the south west Victorian coast. At about 1:30am the Newfield ran aground on a reef about 100 yards from shore and one mile east of Curdie’s Inlet, Peterborough. The ship struck heavily three times before grounding on an inner shoal with 6 feet of water in the holds. Rough sea made the job of launching lifeboats very difficult. The first two lifeboats launched by the crew were smashed against the side of the ship and some men were crushed or swept away. The third lifeboat brought eight men to shore. It capsized when the crew tried to return it to the ship for further rescue The rescue was a difficult operation. The Port Campbell Rocket Crew arrived and fired four rocket lines, none of which connected with the ship. Peter Carmody, a local man, volunteered to swim about one mile off shore to the ship with a line to guide the fourth and final lifeboat safely to shore. He was assisted by James McKenzie and Gerard Irvine. Seventeen men survived the shipwreck but the captain and eight of his crew perished. The Newfield remained upright on the reef with sails set for a considerable time as the wind slowly ripped the canvas to shreds and the sea battered the hull to pieces. The Marine Board inquiry found the wreck was caused by a "one man style of navigation" and that the Captain had not heeded the advice of his crew. According to Jack Loney ‘… when the drama was over . . the Newfield was deserted except for the Captain’s dog and two pigs.’ Peter Carmody was awarded the Bramley-Moore medal by the Liverpool Shipwreck and Humane Society for Saving Life at Ssea, which he received by mail on January 21st 1893. The medal and a letter of congratulations were donated to Flagstaff Hill Maritime Museum by Peter Carmody’s grand-daughter Norma Bracken and her son Stuart Bracken on 25th May 2006. The Bearing Cap joins other items in the Newfield collection.Flagstaff Hill’s collection of artefacts from the Newfield is significant for its association with the shipwreck Newfield, which is listed on the Victorian Heritage Registry. The collection is significant because of the relationship between the objects. The Newfield collection is archaeologically significant as the remains of an international cargo ship. The Newfield collection is historically significant for representing aspects of Victoria’s shipping history and its association with the shipwreck.Brass bearing cap from the wreck of the sailing ship “Newfield” is possibly from a donkey winch engine. The half-circle shaped cuff with a rectangular brass block attached to the outside of each end of the half-circle. Both blocks have a round hole in their centre and are approximately the same depth and width as the cuff. Midway around the half-circle cuff is another brass block that is about twice the depth of the cuff. It appears to have been a circular shape that has been modified to match the width of the collar, having had the sides of the circle cut off to leave straights edge parallel to the edges of the cuff. In the centre of this block is another hole, and there appears to be the head of a bolt inside this hole. The bearing cap is lightly encrusted.1893, flagstaff hill, flagstaff hill maritime museum, maritime museum, warrnambool, newfield, 1892, 28 august 1892, port campbell, shipwreck, nineteenth century, ship, curdie s river, victorian shipwrecks, barque, ship wreck, 29 august 1892, 19th century, bearing cap, donkey engine, donkey winch, steam donkey

One of a collection of over 400 photographs in an album commenced in 1960 and presented to the Phillip Island & Westernport Historical Society by the Shire of Phillip IslandPhotograph of W. J. Kennon's Salvage Team and their winch equipment at the wreck of the "Speke". Kennon's staff known as the "Suicide Crew". S. Kennon, W.J. Kennon, J.B. Cleeland, W. McFee, J. Thompson, J. Walton, D.Justice. May 29th 1907.local history, photography, photographs, maritime technology, wrecks, ss "speke" salvage team, black & white photograph, ss speke. salvage. winches. s kennon, w kennon, j b cleeland, w mcfee, j thompson, j walton, d justice, s kennon, john jenner, bryant west

The Series 2A Ambulances entered service in 1965 and the winch version in 1967. The bodies were locally built and the type was used in South Vietnam by 2 Field Ambulance at Vung Tau. A khaki green vehicle with a solid canopy fitted to the back. A spare tyre sits on the bonnet. Red cross symbol on 3 sides. ambulance, landrover, vung tau, series 2a

Owner of tools Jim Gillespie Clayton VictoriaCaulking iron blacksmith made boot iron, this iron is used for setting down deck seams where they are crossed by a steam or water pipe over the deck. They were also useful in other awkward places e.g. around winches. Driving force either mallet or hammer.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

A black and white photograph of a Huey "Slick" aircraft, of the RAAF's No.9 Squadron, winches a wounded Digger from 8 RAR during Operation North West of the Australian Task Force. The Huey helicopter in its many forms was the close support aircraft for the troops on operations in Vietnam.photograph, huey helicopter, raaf, 9 squadron, digger, 8 rar, operation north west, australian task force, gibbons collection catalogue

A uniform code of signals for working winches in mines was established in 1887. Signs displaying the signals had to be placed in clear view of the engine driver and at each level of the mine. The signals were various numbers of bells.A metal sign with a black background and red and white printing. There three sections, the top one is white text, Signals for Winding, numbered 1 to 10 and 15 down the sign, with instructions next to each number. The next section is red text, Firing Signals, with two lines numbers and writing. The third section is white text, Interplat Signals with signals to raise or lower cage to various levels.code of signals, underground minning

The rectangular weight is rectangular in shape and made of concrete and metal. A closed metal hook is attached to the concrete block, which is encased in metal, and a section of rope is attached. It was used as a counter weight on a canopy that operated as part of a winch located at the [east] landing deck … Originally there were four weights that formed part of a fibreglass canopy which consisted of a staunch, pulley and a rope so when you lifted the canopy up, the weights on either side countered the weight so objects could be moved. The weights were installed in the 1970s and were dismantled along with the winch in the following decade.The weight has first level contributory significance for its provenance and historical value as a component of an earlier apparatus that was used for hoisting goods at the lightstation sea landing.2 x Rectangular shaped weight with with closed hook embedded in concrete surrounded by metal. A section of rope is attached to the hook.