Showing 234 items
matching yarra flats
-
Robin Boyd Foundation
Slide, Robin Boyd, 1965
Robin Boyd has written 'Australiana' on the slide mount (item S1081) at the same location. Robin Boyd was always on the lookout for signage and blots on the landscape, especially when writing and illustrating his 1960 book, “The Australian Ugliness”.Colour slide in a mount. Flats, AustraliaMade in Australia / 14 / AUG 65M / Encircled 31 (Handwritten)australia, slide, robin boyd -
Robin Boyd Foundation
Document - Manuscript, Robin Boyd, Back Doors to Toorak, 1964
Boyd reflects on the increasing growth of apartments built in the urban fabric. The growing demand for flats also contributes to the increasing number of developers who, to Boyd's dismay follow the bare minimum in the Code of Buildings that ultimately contributes and affects the romantic visions of the Australian landscape.Original manuscript of an article titled 'The Flat Revolution' published in The Australian, 13.11.1964.Typewritten (c copy), quarto, 5 pagesflat building, developer, building code, urban living, robin boyd, manuscript -
Robin Boyd Foundation
Document - Manuscript, Robin Boyd, Living and Partly Living. The Neighbourhood, 1971
A discussion of Australia's bland suburbs, and the rise in brick home-building, and the alternative of urban high-rise living. Alternative leisure lifestyles associated with each are outlined. Multi-storey flats, European migration, the unplanned ghettoisation of different groups are discussed. What are the needs for a new era of Australian housing? New initiatives are outlined.Original manuscript of the chapter titled 'The Neighbourhood' (pp32-43) by Robin Boyd in the book "Living and Partly Living", by Ian McKay, Robin Boyd, Hugh Stretton and John Mant, published by Nelson, Sydney 1971.Typewritten (c copy), pencil, quarto, 29 pagesChapter in a book.neighbourhood, neighborhood, suburbia, planning, conformity, brick home, timber home, flathouses, housing commission, european immigration, swinger hill, ian mackay, merchant builders, landscaping, robin boyd, manuscript -
Robin Boyd Foundation
Document - Manuscript, Robin Boyd, (captions for photographs), c1970
Captions for photographs in "Living in Australia"Original manuscript for the captions for "Living in Australia", Pergamon Press, 1970Typewritten (c copy), quarto, 16 pagesmccaughey court, lyons house, mcclune house, menzies college, shelmerdine house, john batman motor inn, black dolphin, marks house, lawrence house, boyd house, walsh st, baker house, troedal house, purves house, fletcher house, handfield house, kaye house, domain park flats, robin boyd, manuscript -
Robin Boyd Foundation
Document - Manuscript, Robin Boyd, Skyline and Houses, c. 1963
Boyd's view of the development of Australian architecture's progression over the years and the slowly forming identity of Australian architecture.Typewritten (c copy), quarto, 5 pagesmodern australia, o-y-o (on your own) flats, robin boyd, manuscript -
Robin Boyd Foundation
Functional object - Cookware, Revere Ware
Robin Boyd developed a close friendship with the founder of the Bauhaus in Weimar Germany, Walter Gropius, who had moved to the USA in the 1930s. Through this connection, Boyd was invited to be the Massachusetts Institute of Technology (MIT) Bemis Professor at the School in the North American academic year 1956-7. During this time, the Boyds purchased this set of Revere kitchenware, which carries the prized "Process Patent" maker's mark on the thick copper bases. Mandie Boyd recalls: "I don’t remember a lot of cooking going on in them, if any, as they were a pain to clean but looked fabulous hanging on the wall absolutely gleaming. We would all check our hair and make up in them."A set of Revere Ware Saucepans and Frying Pans. A set of four Revere Ware copper clad, stainless steel saucepans with lids and black handles and hanging rings. A set of three Revere Ware copper clad, stainless steel pans with black handles and hanging rings. The largest flat one has no lid. Saucepans: largest 175mmx140mm, smallest 120mmx180mm. Frying Pans: largest 350mmx10mm, smallest 80mmx50mm.Revere Ware company engraving. Made under process patent #2363973. 'Revere Ware 1801' 'Patent # 22726091'revere, revereware, revere ware, cookware, walsh st kitchenware, robin boyd, ohm2022, ohm2022_10 -
Robin Boyd Foundation
Furniture - Sofa, Grant Featherston, RS161 Featherston Contour Settee, 1951
This pair of RS161 Grant Featherston Contour Settees (1951) were previously in the Boyd home in Camberwell. Robin Boyd designed the Ivanhoe home and Grant and Mary Featherston (1967).Two two-seater settees, with four timber cigar shaped legs with round flat metal brass feet. Olive green/copper loose weave fabric. Wool/silk blend fabric. Twenty five self-covered buttons. Curvaceous contour shape.walsh st furnishings, settee, featherston, robin boyd -
Robin Boyd Foundation
Furniture - Sofa, Robin Boyd
Robin Boyd designed this three-seater sofa. The sofa was featured in the promotional brochure for Domain Park Flats in 1962. The original sofa is in similar tones to the Featherston chairs (item F002) - it is currently stored offsite.Rectangular three-seater sofa. 6 timber cigar shaped legs with round flat brass metal feet. Olive green/copper loose weave fabric. Wool/silk blend fabric. Armless.walsh st furnishings, sofa, domain park, robin boyd -
Robin Boyd Foundation
Furniture - Sofa
This three-seater sofa is a reproduction of the Robin Boyd designed sofa featured in the promotional brochure for Domain Park Flats in 1962 (item F003) from the 2017 Boyd Collection by furniture makers K5.Rectangular three-seater sofa. 6 timber cigar shaped legs with round flat brass metal feet. Orange wool fabric. Armless.walsh st furnishings, sofa, domain park, robin boyd -
Robin Boyd Foundation
Furniture - Bed
Robin Boyd designed this wooden platform bed specifically for the Walsh St house. It is in keeping with the space's dual purpose as a sitting room and master bedroom.Wooden platform bed with solid base and 4 cigar shaped legs with round flat brass metal feet.walsh st furnishings, robin boyd -
Robin Boyd Foundation
Functional object - Cushion
These are reproductions of the cushions that were originally designed for the platform bed (item F007). In later years these were replaced by more colourful cushions (items F009 and F010).Three flat square cushions upholstered in the same fabric as the sofa in this room (item F004).walsh st furnishings, robin boyd -
Robin Boyd Foundation
Furniture - Sofa, Robin Boyd
Robin Boyd designed this three-seater sofa. The sofa was featured in the promotional brochure for Domain Park Flats in 1962. The original sofa was recovered from yellow upholstery to red in 1967 when the painting 'Man on Sofa' by Tony Woods (item A05) was purchased and hung. The original sofa is currently stored offsite. The sofa was reproduced in the 2017 Boyd Collection by K5 (item F004 and F035).Deep red woolen fabric, three loose seat cushions, no arms, 6 timber legs each with a brass foot cover.sofa, domain park, robin boyd -
Robin Boyd Foundation
Furniture - Sofa, Robin Boyd
This three-seater sofa is a reproduction of the Robin Boyd designed sofa featured in the promotional brochure for Domain Park Flats in 1962 (item F034) from the 2017 Boyd Collection by furniture makers K5.Base in dark red, seat in red and bach in purple, woolen fabric, three loose seat cushions, no arms, 6 timber legs.sofa, domain park, robin boyd -
Robin Boyd Foundation
Decorative object - Model of Carnich Towers, 2017
This scale model is an unbuilt Boyd design for a project names Carnich Towers on 60 Clarendon St, East Melbourne. Boyd's perspective drawings from the late 1960's show the influence of Japanese Metabolist thinking in his late work. This model was created for the House of Ideas exhibition, made by a University of Melbourne, Melbourne School of Design, Masters student.Model of Boyd designed Clarendon St Flats, East Melbourne 1969-1971 (unbuilt)robin boyd -
Robin Boyd Foundation
Functional object - Cushion
Four flat white seat cushions with clips. Possibly cushions for Bertoia outdoor wire chairs (F046). -
University of Melbourne, Burnley Campus Archives
Plan, New School of Primary Agriculture & Horticulture Burnley Gardens, 1945
Photocopy of Plan of the Administration Building by the Chief Architect dated 26.9.45. Scale 1/8 inch - 1 foot. Photocopy reduced in size from original. (1) Ground Floor and First Floor Plans. (2) West Elevation, Longitudinal Section 'B-B' and East Front Elevation. (3) Flat Roof, Library and Herbarium. (4) Common Room and Assembly Hall. Originally in the Burnley Archives. Property and Service now have the original and gave the reduced size photocopy to the Archives. Hard to read now.burnley gardens, school of primary agriculture and horticulture -
University of Melbourne, Burnley Campus Archives
Plan, Flat Concrete Roof & New Staff Room, 1981
(1) Photocopy of plan showing Flat Concrete Roof and New Staff Room. (2) Title of a plan which is probably of (1). Internal Modifications dated 4.6.81 by J.T. Crean, Ass't Director of Public Works. Donated by Sandi Pullman 2012.staff, sandra pullman -
University of Melbourne, Burnley Campus Archives
Photograph - Black and white and colour prints, Flower Portraits
145 photographs of flowering plants displayed for identification in vases or laid flat, some multiple copies. 2 colour photographs.flowes, plants, vases -
Australian Racing Museum
Dress
Roselia Isabell Welch was an actress born 16 November 1838, probably in England. Father John Murrell Welch, mother Angela Towsey. Dress has been worn by her descendants.|This decorative day dress was worn by Roselia Welch to the 1872 Melbourne Cup. Roselia made her Cup Day dress by hand - she may have used a published dress pattern but her skill as a needlewoman is evident as the entire surface is decorated with narrow hand beaded black braid applied in a fern-like motif over the blue cotton fabric of the dress creating a lace-like effect.Dress worn by Roselia Isabel Welch to the 1872 Melbourne Cup. White lining inside dress, blue lining inside train. V neck, front hook and eye opening. Handmade hook holes down centre front. Set in sleeves with black piped armhole seams. Fitted bodice with black piped seams Flat front skirt, full bustle area at back with centre back opening. Floor length train. Blue printed label on lining of centre back panel, right side. Upper case letters 'SUP' visible. Brown tape at waist with hook. Two pairs of tapes either side of back opening for bustle. Black lace around neck, sleeve, train and back opening edges. Black cotton loop in centre of train. Inset pockets right side at hip level and very small one left side at waist level. Entire surface of dress decorated with black braid hand stitched in a fern-like pattern. -
Australian Racing Museum
Corinthian Cup, Caulfield 1878
Corinthian Cup, Caulfield 1878. Two handled silver cup with attached flat lid.The Cup was won by Mr J McFarland’s Gratis. Ridden by Mr E French, at Caulfield Racecourse on 1 July 1878. Presented to the Victoria Amateur Turf Club by Mr W Leonard. -
Friends of Kurth Kiln
Spanner, ~mid 1940
Heavy duty hex wheel wrench, losely tied to a piece of flat steel with several turns of steel wire (perhaps for strengthening). Handle Offset 22cm deep by 14cm wide. Flat steel base is warped and has three holes -
Friends of Kurth Kiln
Rake
Heavy Duty Rake, with attachment to 2.5cm waterpipe fitting. 8 steel prongs are fitted with a flat steel scraper (50 x 8cm x 3mm) at the end, held in place with two steel clamps and two hex bolts and nut each -
Friends of Kurth Kiln
Assembly
A 10cm round cylinder of wood on a 1.2cm round steel shaft, shaped into a 15 x 15cm crank handle. Both ends of the wood are banded with 2.5cm flat steel, fastened with bullet head nails -
Friends of Kurth Kiln
Ratchet Assembly
Ratchet Assembly on a flat surface cast bearing; one side broken off. 10cm dia ratchet wheel held in position by a locating pin. Captive handle 1.2cm round steel 35cm long. A 15cm piece of chain is attached to the shaft. -
Friends of Kurth Kiln
Belt Pulley
Flat Belt Pulley, with 5cm bore, key slot and locating screw. 4 spokes to wheel, 1cm hole in rim of pulley and balancing weight inside of rim -
Puffing Billy Railway
92 NQR - Open Medium Truck, 2/ 3/1907
The NQRs were the standard Medium open goods wagon. Generally the sides and ends were removable thus providing a totally flat truck. Three long drop-down doors formed the sides thus allowing easy loading and unloading. 218 of these goods vehicles were built between 1898 and 1914 ? numbered 1 - 218. Originally, these wagons carried the code letter R as they were built with sides and ends. They later had the R removed. Unlike the Broad Gauge, VR's 2 ft 6 in (762 mm) narrow gauge network never had four-wheeled wagons (aside from a handful of trolleys). Because of this, a single design of open wagon emerged and this was the only type of wagon ever used on these lines. This was the NQR class, a wagon with the same length and loading capacity as a Broad Gauge four-wheeled open wagon to make transferring freight between the gauges easier. The wagons, numbered 1 through 218, were built between 1898 and 1914. The wagons used the same underframe as most other non-locomotives on the VR Narrow Gauge. Letters and numbers were originally painted only on the end bulkheads and doors, both of which could be removed as traffic dictated, and this made wagon identification difficult until the decals were transferred to the underframes of each wagon In the 1910s some NQRs were provided with removable wood and steel frameworks with canvas roof canopies and side curtains, and internal seating to supplement the rest of the passenger stock during busy holiday periods. Puffing Billy has re-created these for emergency capacity. Five more NQRs, numbered 219-223, were built between 1990 and 1992 initially for passenger use so were fitted with the removable frames In the 1960s the Puffing Billy Railway added grids in the floor of some to enable them to be used to drop ballast on the track where needed. Vehicle Length 25 feet 2 inches ( 7671 mm) Coupled Length 27 feet 4 inches (8330 mm) Width 6 feet 3 inches (1905 mm) Weight 5 tons Capacity 11 tons Built 1898 - 1915 (1992) Number Built 218 (223) In use 14 To be restored 6 92NQR - Goods Vehicle - Open Medium Truck NQ/NQR OPEN MEDIUM TRUCKS. 218 of these goods vehicles were built between 1898 and 1914 numbered 1-218. Originally, these wagons carried the code letter R as they were built with sides and ends. Some later had the R removed if they regularly ran as flat wagons without theh sides and ends. Over the years, a number of NQRs were provided with removable wood and steel frameworks with canvas roof canopies and side curtains, and internal seating to supplement the rest of the passenger stock during busy holiday periods. Puffing Billy has re-created these for emergency capacity. Five more NQRs, numbered 219-223, were built between 1990 and 1992 initially for passenger use so were fitted with the removable frames. 92 NQR VR Service History : *NQR 92.VA - 2/ 3/1907 NWS Built new - / /1926 - To NQ 92.VA -Historic - Victorian Railways - Narrow Gauge Rolling Stock - NQR Open Medium Truck with drop ends Victorian Heritage Register (VHR) Number H2187 The Puffing Billy Rolling Stock Collection 92NQR - Open Medium Truck with drop ends made of Steel and metal92NQR puffing billy railway, pbr, rolling stock , 29 nqr, narrow gauge rolling stock, victorian railways, nqr wagon -
Puffing Billy Railway
21 NQR - Open Medium Truck converted to Excursion Car with seats, 26/11/1898
The NQRs were the standard Medium open goods wagon. Generally the sides and ends were removable thus providing a totally flat truck. Three long drop-down doors formed the sides thus allowing easy loading and unloading. 218 of these goods vehicles were built between 1898 and 1914 ? numbered 1 - 218. Originally, these wagons carried the code letter R as they were built with sides and ends. Unlike the Broad Gauge, VR's 2 ft 6 in (762 mm) narrow gauge network never had four-wheeled wagons (aside from a handful of trolleys). Because of this, a single design of open wagon emerged and this was the only type of wagon ever used on these lines. This was the NQR class, a wagon with the same length and loading capacity as a Broad Gauge four-wheeled open wagon to make transferring freight between the gauges easier. The wagons, numbered 1 through 218, were built between 1898 and 1914. The wagons used the same underframe as most other non-locomotives on the VR Narrow Gauge. Letters and numbers were originally painted only on the end bulkheads and doors, both of which could be removed as traffic dictated, and this made wagon identification difficult until the decals were transferred to the underframes of each wagon In the 1910s some NQRs were provided with removable wood and steel frameworks with canvas roof canopies and side curtains, and internal seating to supplement the rest of the passenger stock during busy holiday periods. Puffing Billy has re-created these for emergency capacity. Five more NQRs, numbered 219-223, were built between 1990 and 1992 initially for passenger use so were fitted with the removable frames Vehicle Length 25 feet 2 inches ( 7671 mm) Coupled Length 27 feet 4 inches (8330 mm) Width 6 feet 3 inches (1905 mm) Weight 5 tons Capacity 11 tons Built 1898 - 1915 (1992) Number Built 218 (223) In use 14 To be restored 6 21 NQR - Open Medium Truck with drop ends VR Service History 26/11/1898 NWS Built new Vehicle Length 25 feet 2 inches ( 7671 mm) Coupled Length 27 feet 4 inches (8330 mm) Width 6 feet 3 inches (1905 mm) Weight 5 tons Capacity 11 tons Built 1898 - 1915 (1992) Number Built 218 (223) In use 14 To be restored 6 *NQR 21.VA - 26/11/1898 NWS Built new - / /1926 - To NQ 21.VA - NQ 21.VA - 17/ 9/1936 NWS Into Workshops - 29/ 4/1937 NWS Out of Workshops (50 days) Puffing Billy Service History or Notes Historic - Victorian Railways - Narrow Gauge Rolling Stock - Open medium truck with seats (No. 21)21 NQR - Open Medium Truck converted to Excursion Car with seats made of Steel and metal21 NQRpuffing billy railway, pbr, rolling stock , 21 nqr, victorian railways, nqr open medium truck with seats -
Puffing Billy Railway
29 NQR - Open Medium Truck with drop ends, 15/12/1898
The NQRs were the standard Medium open goods wagon. Generally the sides and ends were removable thus providing a totally flat truck. Three long drop-down doors formed the sides thus allowing easy loading and unloading. 218 of these goods vehicles were built between 1898 and 1914 ? numbered 1 - 218. Originally, these wagons carried the code letter R as they were built with sides and ends. They later had the R removed. Unlike the Broad Gauge, VR's 2 ft 6 in (762 mm) narrow gauge network never had four-wheeled wagons (aside from a handful of trolleys). Because of this, a single design of open wagon emerged and this was the only type of wagon ever used on these lines. This was the NQR class, a wagon with the same length and loading capacity as a Broad Gauge four-wheeled open wagon to make transferring freight between the gauges easier. The wagons, numbered 1 through 218, were built between 1898 and 1914. The wagons used the same underframe as most other non-locomotives on the VR Narrow Gauge. Letters and numbers were originally painted only on the end bulkheads and doors, both of which could be removed as traffic dictated, and this made wagon identification difficult until the decals were transferred to the underframes of each wagon In the 1910s some NQRs were provided with removable wood and steel frameworks with canvas roof canopies and side curtains, and internal seating to supplement the rest of the passenger stock during busy holiday periods. Puffing Billy has re-created these for emergency capacity. Five more NQRs, numbered 219-223, were built between 1990 and 1992 initially for passenger use so were fitted with the removable frames Vehicle Length 25 feet 2 inches ( 7671 mm) Coupled Length 27 feet 4 inches (8330 mm) Width 6 feet 3 inches (1905 mm) Weight 5 tons Capacity 11 tons Built 1898 - 1915 (1992) Number Built 218 (223) In use 14 To be restored 6 29 NQR - Open Medium Truck with drop ends VR Service History 15/12/1898 NWS Built new *NQR 29.VA - 15/12/1898 NWS Built new - / /1926 - To NQ 29.VA - NQ 29.VA - /10/1954 - Sold (to) - Puffing Billy Service History or Notes July 2016 - LiftedHistoric - Victorian Railways - Narrow Gauge Rolling Stock - NQR Open Medium Truck with drop ends29 NQR narrow gauge Open Medium Truck with drop ends made of Steel and metal 29NQRpuffing billy railway, pbr, rolling stock , 29 nqr, narrow gauge rolling stock, victorian railways, nqr wagon -
Puffing Billy Railway
91 NQR - Open Medium Truck with drop ends, 15/ 2/1907
The NQRs were the standard Medium open goods wagon. Generally the sides and ends were removable thus providing a totally flat truck. Three long drop-down doors formed the sides thus allowing easy loading and unloading. 218 of these goods vehicles were built between 1898 and 1914 ? numbered 1 - 218. Originally, these wagons carried the code letter R as they were built with sides and ends. They later had the R removed. Unlike the Broad Gauge, VR's 2 ft 6 in (762 mm) narrow gauge network never had four-wheeled wagons (aside from a handful of trolleys). Because of this, a single design of open wagon emerged and this was the only type of wagon ever used on these lines. This was the NQR class, a wagon with the same length and loading capacity as a Broad Gauge four-wheeled open wagon to make transferring freight between the gauges easier. The wagons, numbered 1 through 218, were built between 1898 and 1914. The wagons used the same underframe as most other non-locomotives on the VR Narrow Gauge. Letters and numbers were originally painted only on the end bulkheads and doors, both of which could be removed as traffic dictated, and this made wagon identification difficult until the decals were transferred to the underframes of each wagon In the 1910s some NQRs were provided with removable wood and steel frameworks with canvas roof canopies and side curtains, and internal seating to supplement the rest of the passenger stock during busy holiday periods. Puffing Billy has re-created these for emergency capacity. Five more NQRs, numbered 219-223, were built between 1990 and 1992 initially for passenger use so were fitted with the removable frames In the 1960s the Puffing Billy Railway added grids in the floor of some to enable them to be used to drop ballast on the track where needed. Vehicle Length 25 feet 2 inches ( 7671 mm) Coupled Length 27 feet 4 inches (8330 mm) Width 6 feet 3 inches (1905 mm) Weight 5 tons Capacity 11 tons Built 1898 - 1915 (1992) Number Built 218 (223) In use 14 To be restored 6 91 NQR - Open Medium Truck VR Service History 15/ 2/1907 NWS Built new Vehicle Length 25 feet 2 inches ( 7671 mm) Coupled Length 27 feet 4 inches (8330 mm) Width 6 feet 3 inches (1905 mm) Weight 5 tons Capacity 11 tons Built 1898 - 1915 (1992) Number Built 218 (223) In use 14 To be restored 6 *NQR 91.VA - 15/ 2/1907 NWS Built new - / /1926 - To NQ 91.VA - Puffing Billy Service History or Notes April 2016 - New Bogie has been assembled and awaits testing under 91NQR May 2016 - New Bogie has been assembled and awaits testing under 91NQR July 2016 - New Bogie has been assembled and awaits testing under 91NQR Aug 2016 - New Bogie has been assembled and awaits testing under 91NQR Sept 2016 - New Bogie has been assembled and awaits testing under 91NQR Oct 2016 - New Bogie has been assembled and awaits testing under 91NQR Nov 2016 - New Fox bogie Under 91NQR - Flats Link to Heritage / Period Photos PBR Workshop Blog Report Friday, May 20, 2016 Bogie in Brief - on NQR 91 http://puffingbillyworkshops.blogspot.com.au/2016/05/bogie-in-brief.htmlHistoric - Victorian Railways - Narrow Gauge Rolling Stock - NQR Open Medium Truck with drop ends91 NQR narrow gauge Open Medium Truck with drop ends made of Steel and metal91 NQRpuffing billy, pbr, rolling stock , 91 nqr, narrow gauge rolling stock, nqr wagon, victorian railways, 91 nqr -
Puffing Billy Railway
26 NQR - Open Medium Truck, 10/12/1898
The NQRs were the standard Medium open goods wagon. Generally the sides and ends were removable thus providing a totally flat truck. Three long drop-down doors formed the sides thus allowing easy loading and unloading. 218 of these goods vehicles were built between 1898 and 1914 ? numbered 1 - 218. Originally, these wagons carried the code letter R as they were built with sides and ends. They later had the R removed. Unlike the Broad Gauge, VR's 2 ft 6 in (762 mm) narrow gauge network never had four-wheeled wagons (aside from a handful of trolleys). Because of this, a single design of open wagon emerged and this was the only type of wagon ever used on these lines. This was the NQR class, a wagon with the same length and loading capacity as a Broad Gauge four-wheeled open wagon to make transferring freight between the gauges easier. The wagons, numbered 1 through 218, were built between 1898 and 1914. The wagons used the same underframe as most other non-locomotives on the VR Narrow Gauge. Letters and numbers were originally painted only on the end bulkheads and doors, both of which could be removed as traffic dictated, and this made wagon identification difficult until the decals were transferred to the underframes of each wagon In the 1910s some NQRs were provided with removable wood and steel frameworks with canvas roof canopies and side curtains, and internal seating to supplement the rest of the passenger stock during busy holiday periods. Puffing Billy has re-created these for emergency capacity. Five more NQRs, numbered 219-223, were built between 1990 and 1992 initially for passenger use so were fitted with the removable frames In the 1960s the Puffing Billy Railway added grids in the floor of some to enable them to be used to drop ballast on the track where needed. Vehicle Length 25 feet 2 inches ( 7671 mm) Coupled Length 27 feet 4 inches (8330 mm) Width 6 feet 3 inches (1905 mm) Weight 5 tons Capacity 11 tons Built 1898 - 1915 (1992) Number Built 218 (223) In use 14 To be restored 6 26 NQR - Open Medium Truck (11) 10/12/1898 NWS Built new Vehicle Length 25 feet 2 inches ( 7671 mm) Coupled Length 27 feet 4 inches (8330 mm) Width 6 feet 3 inches (1905 mm) Weight 5 tons Capacity 11 tons Built 1898 - 1915 (1992) Number Built 218 (223) In use 14 To be restored 6 VR Service History *NQR 26.VA - 10/12/1898 NWS Built new - / /1926 - To NQ 26.VA - NQ 26.VA - 24/10/1936 NWS Into Workshops - 7/12/1936 NWS Out of Workshops (45 days) /10/1954 - Sold (to) - Puffing Billy Service History or Notes Historic - Victorian Railways - Narrow Gauge Rolling Stock - NQR Open Medium Truck26 NQR - narrow gauge Open Medium Truck made of Steel and metal26 NQRpuffing billy railway, pbr, rolling stock , 26 nqr - open medium truck, victorian railways, narrow gauge rolling stock, nqr wagon, 26 nqr, nqr open medium truck