In 1913, Mark Cowley Lidwill designed a machine for the purpose of mechanical or insufflation anaesthesia. The Lidwill machine was a portable machine weighing 7kg that could easily be packed into two small bags. The machine involved compressed air being delivered to an ether vaporiser. An ether/air control device allowed varying concentrations of ether to be delivered. The ether vaporiser could be immersed in hot water to prevent cooling and the ether temperature was measured. From the vaporiser, the ether/air mixture went through a trap bottle, then to a crude mercury blow-off valve and subsequently to the patient.Large leather suitcase style bag divided into two levels containing and insufflation anaesthesia machine.insufflation, mark cowley lidwill, thoracic surgery, positive pressure

The Bird ventilator Mark 7 is driven by medical compressed air or oxygen. It is not suited for anaesthesia unless using a special anaesthesia assistor controller attachment, which is essentially a “bag in a bottle” device.Apparatus attached to four castor stand with attached white wall connecting tubing.anaesthesia attachment, bag in a bottle

Laryngoscope handle, with screw in connector for blade. It has a textured handle with a serrated grip for ease of use. The handle is also a battery deposit. Stamped on the base of the handle is the trade mark name details (PENLON) and the place where was made (ENGLAND). The piece has some slight scratches and surface subsidence because of its use. It has a residual marks from an used sticky tape on the base. Stamped on the base, REGD TRADE MARK / P E N L O N / MADE IN ENGLANDlaryngoscope, handle, screwed laryngoscope, screw, penlon, battery

Curved laryngoscope blade with light bulb only. It has visible scratches on top and back side of the blade. A rusty washer under the handle joint. Is also present in the blade base back side a curved shaped lamina attached by a screw. This blade correspond to a large size (adult) laryngoscope blade. It has stamped on the base inscriptions about: trade mark (PENLON), place where it was made (ENGLAND) and its material (Stainless).Stamped on the blade base, REGD. TRADE MARK / PENLON / MADE IN ENGLAND Stamped on the back edge of the blade, STAINLESSblade, penlon, light bulb, laryngoscope

Seward laryngoscope blade only. No light bulb is present in this item. Size1 for infants use. Minor scratches and dust around the piece. Some hit marks on top of the blade and base. Rusty washer under the joint base. Stamped on the base, lateral side: the trade mark details (PENLON), place where it was made (ENGLAND) and at the back side of the blade the type of blade (SEWARD) and the size (1). Stamped, REGD. TRADE MARK / PENLON / MADE IN ENGLANDblade, laryngoscope, seward, light bulb, size 1, penlon

Complete Macintosh laryngoscope piece with a curved large sized attached blade with light bulb and a textured handle with serrated grip for easy of use and a screw in the blade connector. The handle is also a battery deposit to supply the led light bulb. The blade has general scratches on its surface because its use. At the back of the blade is still attached the curved lamina as holder of the base with the blade in its regular use position. Several engraved and stamped inscriptions are present all over the handle and blade (see inscriptions for details). Stamped on the base of the blade, BOC Stamped on the edge of the back side blade, STAINLESS Stamped on the back side blade base, MADE IN ENGLAND Engraved at the base of the blade attachment place, MAINLAND Engraved at the edge of the serrated grip of the handle, Alfred Anaes Stamped at the base of the handle, REGD TRADE MARK / P E N L O N / MADE IN ENGLAND Stamped at the bottom of the handle base, REGD TRADE MARK / P E N L O N / MADE IN ENGLAND Engraved at the bottom of the handle base, AnaeA / ALFREDlaryngoscope, complete laryngoscope, boc, penlon, handle, alfred hospital, anaesthesia

Curved MAC (Macintosh) HEINE laryngoscope blade with light bulb, size 4. Made in Germany with stainless steel materials. Minor scratches and hit surface marks are around the piece, mostly near the base of the blade. Connector point located at the base of the blade is slightly worn out. Stamped on the base of the blade back edge side, HEINE / STAINLESS / W.-GERMANY Stamped at the lateral back side of the blade, MAC 4airway, laryngoscope, alfred hospital, melbourne, mac 4 heine, heine, blade, ball, christine

Semi straight infant Macintosh blade with light bulb only. The item has a general good conservation and completeness regarding its hinge piece and base bulb connector. It has stamped the manufacturer name (PENLON) and the place where it was made (New Zealand).Stamped, REGD TRADE MARK / PENLON / MADE IN NEW ZEALANDpenlon, macintosh, straight laryngoscope, infant, blade, laryngoscope, new zealand

A Soper straight laryngoscope blade adult size with bulb only. The blade has minor scratches over its surface and below the arm's blade because of its use. Presence of an old sticky tape mark under the blade. The contact stud at the base of the blade is worn. The end of the blade has a perforated line as part of its design. The metallic base of the light bulb has an oxide spot on it. No inscriptions. No inscriptionssoper, laryngoscope, blade, adult, light bulb

"First described by professor R. R. Macintosh in the Lancet of February 13th, 1943, this design is now the acknowledged leader throughout the world." (PENLON, 1969) Reference: PENLON. 1969. Anaesthetic Equipment - Longworth Scientific Instrument Company LTD. Abingdon, Berkshire, England. January 1969. Macintosh semi curved blade designed in a child size, with a light bulb attached. Minor scratches and some slight hit marks over the piece surface caused by its previous use. It has stamped the manufacturer name and the place where it was made at the back of the blade.Stamped on the back blade base, Longworth / MADE IN ENGLANDmacintosh, blade, longworth, paediatrics, light bulb

"First described by professor R. R. Macintosh in the Lancet of February 13th, 1943, this design is now the acknowledged leader throughout the world." (PENLON, 1969) Reference: PENLON. 1969. Anaesthetic Equipment - Longworth Scientific Instrument Company LTD. Abingdon, Berkshire, England. January 1969.Macintosh semi curved blade designed in a child size, with a light bulb attached to the blade and a hinge attached to the back side of the base. Several scratches and deep hit marks over its surface caused by its previous use. This piece also has visible old dust spots and stains. Its contact stud is in a well condition and does not has any inscriptions. macintosh, blade, paediatrics, light bulb

"First described by Professor R. R. Macintosh in the Lancet of February 13th, 1943, this design is now the acknowledged leader throughout the world." (PENLON, 1969) Reference: PENLON. 1969. Anaesthetic Equipment - Longworth Scientific Instrument Company LTD. Abingdon, Berkshire, England. January 1969.Right hand stainless steel size 3 Macintosh interchangeable laryngoscope blade with light bulb, attached to a standard sized handle with serrated grip and no batteries inside deposit. Minor scratches and hit marks are over its surface. A blue sticky tape is attached to the back side of the blade where the size and type is, also can be found the mark left by a previous sticky tape around the top neck of the handle. The blade was made by Penlon in England.Engraved in cursive writing above the light bulb, Royal Childrens Hospital Engraved in capital writing above the light bulb next to previous text, D.A. Stamped at the back side of the blade, MACINTOSH / 3 Stamped at the blade base lateral side, REGD. TRADE MARK / PENLON / MADE IN ENGLAND Stamped at the blade back side, STAINLESSlaryngoscope, macintosh laryngoscope, macintosh blade, light bulb

This object was displayed as part of the temporary Mask-Inhaler Exhibition during the Geoffrey Kaye Symposium, 29-30 January 2013.Laryngoscope penlite handle for infant Longworth fitting blades use, with a serrated grip on battery deposit, no batteries included. Top handle fitting screw is present. Minor scratches and hit marks are present over its surface. It has stamped the trade mark and place of manufacturing.Stamped on the top handle attachment place, REGD TRADE MARK / PENLON / [M] ADE IN ENGLANDhandle, penlon, longworth fitting handles, infant size handle

Magill type blade to fit Longworth handles adult size without light bulb. Attached hinge at the back of the blade. Visible hit marks mostly present at the back top of the blade and below. Worn contact stud on base and lateral side at the light bulb connection. Dust spots around the piece. It has stamped on the blade base the attachment type name.Stamped at the attachment base of the blade in cursive writing, Longworthlongworth, magill, blade, adult blades, penlon

Please refer to The Wood Library for further information about this piece. URL: https://www.woodlibrarymuseum.org/museum/item/664/jackson-laryngoscope Chevalier Jackson direct laryngoscope, with attached small light bulb inside the internal blade. Brass coated piece with a large size. This piece has a discoloured and beaten surface with visible hit marks, deformation at the back of the blade and green spots in handle area. The hand anatomic handle is faceted and designed with a thumb rest section at the angle. Welding sections are visible along the blade base external canal and handle attachment area. No inscriptions.Anychevalier jackson, laryngoscope, light bulb, brass

It is likely that this object belonged to Dr Giles.Chevalier Jackson medium size steel made laryngoscope. Hexagonal shape design on handle and arm blade with a thumb support at the handle angle, missing the bulb light and all the system to support it. Deep scratches over the top and under blade with presence of dust marks over the handle, arm and inside the blade canal. Also has a grey paint mark over the top blade area. No stamped inscriptions are present just a label attached with a possible owner's name and a reference code to the museum old catalog.Attached label hand written inscription, Giles / S 4. 13chavalier jackson, laryngoscope, stainless steel

Used by mothers during childbirth, the anaesthetic Trilene (trichloroethylene) was inhaled through a face mask [missing] attached to the rubber tubing [missing] and the vaporising chamber. The Trilene was poured into the chamber to be turned into a vapour. The machine was used in the obstetric wards at University College Hospital, London. Trilene was introduced in the 1940s. The machine was made by Cyprane Ltd.Khaki metal multi layered cylinder. Set on top of khaki metal plate with four (4) rubber feet.Stamped in red on top level of vaporiser: Cyprane Ltd •Stamped in red on serial plate: TECOTA MARK 6 / CHARGE WITH TRICHLOROETHYLENE B.P. / CYPRANE LTD. SERIAL No / KEIGHLEY / YORKS. / T1469 •Clear sticker with red printed text stuck on metal plate: PAT No 646680 / PATENTS PENDINGtrichlorethylene vaporiser, tecota mark 6

The bottle was probably used for holding ether as part of a doctors medical kit. The bottle has visible side mould seams on the shoulder which discontinues or fades at the lip, a tooled finish and the glass has bubbles. There is no pontil-scar or mark on the base of the bottle, but there is a circular mould seam on the base.Small square based glass bottle with round neck, possibly used to hold ether. Found inside carry box with other unrelated objects including brown stopper which does not fit in bottle. Appropriate stopper for glass bottle is not present.Small amount of brown residue inside bottle. Bubbles in side of glass. Brown marks on outer bottle. Scratches inside bottle neck. Glass stopper missing.dr [e.s.] holloway, bottle, glass

This is a portrait of Professor Michael Cousins in his role as Dean of the Faculty of Pain Medicine at ANZCA (1999 - 2002). The portrait was unveiled at a College ceremony/meeting on 30 July 2003. The portrait was commissioned by FPM to mark the Deanship of Prof Cousins. Gary Lee Gaston is an Australian visual artist who was born in 1938. He is a painter, teacher and sculptor. He has exhibited in Adelaide and is a fellow of the Royal South Australian Art Society.Professor Michael Cousins was instrumental in the establishment of the faculty of pain medicine and was its first Dean from 1999 - 2002.Oil on canvas painting of the Faculty of Pain Medicine Dean, Professor Michael Cousins set in a plain gold wooden frame.hand written on the reverse in black ink - 762 x 632 / VM24 OIL liNen •stamped on reverse in black ink: CENTRAL ARTISTS SUPPLIES / 45 Osmond Terrace / Norwood SA 5067 / Phone/Fax: 8364 2088 •hand written on reverse in black ink: GARY LEE-GASTON / O.A.M F.R.S.A.S.A. •hand written on reverse in balck ink: PROFESSOR COUSINS 2003 / A.M. MB BS MD (SYD.) FFPMANZCA. FANZCA. FRCA. •engraved onto brass plaque on front of frame: Professor Michael J. Cousins / Inaugural Dean / 1999 - 2002 •inscribed on lower right hand side of painting: artist's signatureprofessor michael cousins, faculty of pain medicine, gary lee gaston, royal south australian art society., commissioned portrait

The bowl was presented to ANZCA by Dr K Inbasegaran on behalf of the Malaysian Society of Anesthesiologists, Academy of Medicine of Malaysia, at the 2003 Hobart Annual Scientific Meeting (ASM). Dr. Richard Willis was President of the ANZCA at the time and formally accepted the gift during the ASM.Pewter bowl on raised round base with gold plated decorated inlay in an ornate flowery scroll pattern. The gift details are engraved on the one side of the bowl.[front] WITH COMPLIMENTS / TO ANZCA / FROM MAL. SOC. ANAES. / MAY 2003 [base, maker's mark] ROYAL / SELANGOR / PEWTERacademy of medicine of malaysia, inbasegaran, dr willis, richard, malaysia, anesthesiologists, royal selangor, malaysian society of anesthesiologists

This bowl was presented to ANZCA during the 35th Malaysia Singapore Congress of MedicinePewter bowl on raised round base with silver plated decorated inlay in an ornate flowery scroll pattern. The gift details are engraved on the one side of the bowl.[front] Presented to / Australian & New Zealand College of Anaesthestists / in Conjunction With / 35th Malaysia - Singapore Congress of Medicine / August 2001 [base, maker's mark] ROYAL / SELANGOR / PEWTERcorporate gift, selangor pewter, malaysia-singapore congress

The donor of this gift, Professor John Gibbs, has played an important role in the history of ANZCA as a board member of the first ANZCA Council. In the late 1980s Professor Gibbs was President of the New Zealand Society of Anaesthetists and in 2004 received the ANZCA medal for his major contributions to the status of anaesthesia. The muffineer set was presented in a custom made box bearing the manufacturer's mark 'Nanking Store', active in Shanghai, China from the late 19th century until early 20th century. Each item in the set is stamped with the makers mark and character of a rooster. It is unknown as to the symbolism of the rooster, however, it may have represented the Chinese year of the rooster. It is possible this is a Chinese export silver piece, as a result of increased export trade to the West in the early 20th century. Chinese export silver were made in foreign taste for export, in particular common items such as tea and coffee sets. A Muffineer is a small container with a pierced top for sprinkling sugar, salt, spice, or other powder. It gained its name from its early use for sprinkling sugar or salt on muffins and were part of the Victorian tableware. After the First World War and the change of life style, this was later referred to as sugar shakers.A sterling silver muffineer set of Queen Anne revival with tray. Muffiner set contains 3 silver shakers (muffineer), 6 silver condiment dishes on stand 3 with lid and handle, 10 small, rounded spoons, 10 blue, glass inserts for condiment dishes. The set comes with a custom made presentation box, lined with beige silk. The box proper is lined in dark blue velour with individual sections cut out to sit each set piece. Each piece is hallmarked except four spoons. Large heavy oval shaped silver tray with extended loop rope designed handle on either side decorated with a very ornate fern leaf pattern design etched into the entire base of the tray. [printed in gold lettering on beige fabric inside lid cover] Chinese name of manufacturer in Chinese characters / NANKING STORE / GOLD AND SILVER SMITHS / 444 SZECHUEN ROAD / SHANGHAI / markers mark and Chinese characters [hallmarks on condiments dishes] NKSTERLING / SILVER / character of rooster [hallmarks on muffineer] NANKING / SILVER / character of rooster [hallmarks on spoons - 6 only] NANKING / character of rooster [hallmarks on tray reverse] 19722 number scratched into surface.professor john gibbs, nanking store, chinese export silver, muffineer, sterling silver

This vase was gifted to the Faculty by Dr Walter Wyndham Biggs upon his retirement from the Faculty Board in 1981. Dr Biggs was the first flying anaesthetist of the Flying Surgeon Service based at Longreach in central Queensland. The vase is hand painted by Dr Biggs mother, Bessie Biggs. The manufacturer of the vase, Furstenberg, is one of oldest and most renowned porcelain makers in Europe since 1747. Made in West Germany, the makers mark is found at the base of the vase marked with a blue under glaze symbol of a crown, script F and a number 9. Porcelain vase of bulbous form and narrow neck with gold trim on lip. Black and white hand painted scene of flying geese above a body of water surrounded by reeds.[hand written on base in black ink] Handpainted / by / Bessie Biggs / 1981 [embossed on base] 7405/30 [Blue under-glaze on base] symbol of crown / cursive script F / 9 / FURSTENBERG / SEIT 1747 / WEST GERMANY [Artist signature on painted surface] B BIGGSdr walter biggs, furstenberg, porcelain

This pair of wine coasters were gifted by the Faculty of Anaesthetists, Royal College of Surgeons of England to commemorate the 25th anniversary of the first meeting of the FARACS in 1952. The hallmarks engraved on the silver verify the maker and date.A pair of sterling silver wine coasters with a turned wood base.Engraved on both objects; PRESENTED BY / THE FACULTY OF ANAESTHETISTS R.C.S. ENG. / 1952-1977 [hallmark] LGS / character of lion / mark of leopards head / cursive script C / mark of Queen Victoriafaracs, royal college of surgeons of england, rcs, l.g.s. london

Dr Leona Willson was the first female to be elected president of ANZCA (2008 - 2010) and the first New Zealander to hold the position. In 2011, Dr Wilson was awarded the New Zealand Order of Merit in which she is proudly wearing this medal in the portrait. The portrait was commissioned by ANZCA to mark the presidential term of Dr Leona Wilson which was unveiled at the ANZCA Council meeting June 2013. The artist, Jude Rae, is a Sydney based artist primarily known for her still life paintings, portraits and architectural interiors. Her artwork is held in major public and private collections in Australia, New Zealand, UK and USA. Dr Leona Wilson was the first female ANZCA President and first President from New Zealand to hold the position.Oil on canvas portrait of Dr Leona Wilson wearing the Presidential medal without the Presidential gown. She is wearing the New Zealand Order of Merit medal on her left lapel. She has her hands clasped in front of her and is seated on an angle in a chair in front of a plain grey background. The painting is mounted in a thin black frame and sits in a box frame coloured brown and gold.painting, wilson, leona, rae, jude, new zealand order of merit

Professor Kate Leslie was ANZCA President from 2010 - 2012. The portrait was commissioned by ANZCA to mark the presidential term of Professor Kate Leslie and was unveiled at the ANZCA staff Christmas event on the 15 November 2013. The artist, Robert Hannaford, is from South Australia and was a political catoonist. He has a long history of painting portraits of politicians and distinguished professionals in the field. Oil on canvas portrait of Professor Kate Leslie wearing the Presidential medal without the Presidential gown. She has her arms casually crossed in front with legs crossed, and is seated in front of a plain brown background. The painting is set in a wide timber frame.[lower RHS] HANNAFORD '13painting, leslie, kate, anzca president, hannaford, robert

The painting was commissioned by ANZCA to mark the presidential term of Dr Lindy Roberts from 2012 until 2014. The artist Robert Hannaford has a long history of painting portraits of politicians and distinguished professionals in the field. Oil on canvas portrait of Dr Lindy Roberts seated in front of a plain brown background. She is facing front on with legs crossed, one hand over the other resting on her knee. She is wearing the Presidential medal which is slightly covered by her multi-coloured jacket of pink, grey and white. The painting is set in a wide timber frame.[artist signature and date, lower RHS] HANNAFORD ' 13painting, anzca president, roberts, lindy, hannaford, robert

The Lidwill machine was designed by Mark Lidwill in 1913, for the purpose of mechanical or insufflation anaesthesia. It was manufactured by Elliott Bros. of Sydney.Colour photograph of a Lidwill anaesthetic machine sitting on carpet. A circular metal ether vaporiser sits on a brown wooden base, with brown tubes connecting to a trap bottle and metal valves, and a brown tube connected to the valve is coiled on the floor.anaesthetic equipment, lidwill anaesthetic machine, mark lidwill, ether vaporiser, elliott bros sydney

The Lidwill machine was designed by Mark Lidwill in 1913, for the purpose of mechanical or insufflation anaesthesia. It was manufactured by Elliott Bros. of Sydney. Shortly afterwards, the Anaesthetic and Portable Machine Company of Sydney devised a machine that was functionally the same but also contained an electric lamp heater.Colour photograph of a modified Lidwill anaesthetic machine sitting on carpet, taken from above. The vaporiser is metal and circular, and has metal valves and controls and two orange tubes. The machine has an electric cord and power plug which is coiled on the floor.anaesthetic equipment, lidwill anaesthetic machine, mark lidwill, ether vaporiser, anaesthetic and portable machine company of sydney, vaporiser

The Bird Mark 4 is an anaesthesia assistor or controller with pressure and volume controller to be driven by a respirator. Combination of Mark 4 with respirator makes an automatic anaesthesia respirator eliminating manual bagging. The machine can work through Boyle anaesthetic system. It is designed for both paediatric and adult application. (Drugs and Equipment in Anaesthesia Practice, Aruna Parameswari, 2019)Green metal box atop a clear plastic unit with a black bellows inside, which forms one part of the overall unit. The unit is attached to a pole, enabling height adjustment. The pole is, in turn, attached to a set of four castors [not original].White text on black stick on strip on top of metal box: DO NOT PULL APART / FOR USE IN THEATRE ONLY A series of instructions are printed in white text over the unit.anaesthesia assistor, anaesthesia controller, pressure controller, volume controller, paediatric, adult