Set of three coat buttons: 1 - Small Prahran and Malvern Tramways Trust - PMTT - made by Stokes and Sons Melbourne - approx. 20mm dia. The badge backing piece is brass. 2 - Large PMTT - heavily worn - made by Stokes and Sons Melbourne - approx. 26mm dia - missing lug. 3 - MMTB button or Badge - damaged - made by Buttons of Birmingham UK - approx. 25mm dia. Each button has a backing piece on rear with a lug (except for 2) for sewing onto a jacket and have name of manufacturer stamped on rear part. "Buttons Ltd" of Birmingham, England has their trade mark, a pair of fully opened scissors.trams, tramways, mmtb, melbourne tramways, uniforms, buttons, pmtt

Provided by the MMTB to its Officers, eg Inspector as a pass for free travel on its trams. See items 397 and 7082 for other examples and 7447 for the circular issuing these in Nov. 1963.Demonstrates a travel pass issued to MMTB Officers for free travel and identification to crews.Stamped metal badge, "M&MTB Traffic Officer" pass, brass 6 sided, with hole in top with green enamel around the letters and the number "195" stamped into the base. On rear has remains of "Stokes Melb".trams, tramways, badges, officers, mmtb, passes

Pressed metal uniform badge for the Melbourne Tramways Board, Employees, available all lines. Round pressed steel badge with the words "All Lines" pressed into the badge around the top portion of the badge, the word "TRAMWAY EMPLOYEE" and number "10" pressed into the lower half of the badge -with small horizontal lines within the individual letters. Has a brass finish with the Melbourne Tramways Board logo in the lower part of the badge. On rear badge two metal lugs have been soldered onto the badge and a leather strap with a button hole cut into to enable it to be worn on a uniform. Leather strap secured with a brass rivet. Used possibly from mid 1910's when the Board was formed until it was replaced by the MMTB in 1921. Similar badges made for ESCo Ballarat by Stokes and Sons, see all Reg Items 394 and 579.trams, tramways, badges, employees, tb, mmtb, passes

Small Hawthorn Tramways Trust - HTT - made by Stokes and Sons Melbourne - approx. 20mm dia. The badge backing piece is brass. It is fitted with a lug for sewing onto a jacket and have name of manufacturer stamped on rear part.trams, tramways, melbourne tramways, uniforms, buttons, htt

Set of five nickel silver MMTB Coat buttons. Three of the buttons (approx. 22mm dia) are made by Stokes and Sons Melbourne and the two (approx. 25mm dia) are made by K. G. Luke Australasia. The badge backing piece is brass. It is fitted with a lug for sewing onto a jacket and have name of manufacturer stamped on rear part. The Stokes and Sons badges are two small holes in the rear, while the Luke's badges do not.trams, tramways, melbourne tramways, uniforms, buttons, mmtb

Set of two badges or medallions issued to first world war veterans or widows. Round cast brass with a small lug or attachment point on the top, finished with a high gloss lacquered finish. Rear finished with a slight stippled finish, with the words "Not Transferable" and the name of the manufacturer, "Swan & Hudson" cast in. .1 - black background, with the words "World War 1 Veterans Travel Pass 1980" in gold and the number "4720", stamped in a gold background. .2 - yellow background with the words "Widow of World War 1 Veteran" and the number "12001" stamped into a gold background. See Reg Item 852 for that issued to wife's.trams, tramways, badges, world war 1, tickets

Badge or medallion issued to wives of first world war veterans. Round cast brass with a small lug or attachment point on the top, finished with a high gloss lacquered finish. Rear finished with a slight stippled finish, with the words "Not Transferable" and the name of the manufacturer, "Swan & Hudson" cast in. Yellow background with the words "World War 1 Veterans Wife" and the number "507" stamped into a gold background. See Reg Item 811 for the one issued to veterans and widows of veterans.trams, tramways, badges, world war 1, tickets

ATMOEA Vic. Branch (Tramways Union) badge No. 1440. Badge was made on a brass/gold backing with painted enamel on the front. On the central portion of the badge, had the ATMOEA logo, with the words "Vic" with red enamel backing, and on the outer edge of the badge "Aust Tramway & Motor Omnibus Employees Association" with a royal blue background. On back of badge has clip for fitting through an opening on a jacket or coat lapel. On top of back of badge has number stamped in "1440" and bottom words "K. G. Luke / Melb." indicating manufacture. See image files for front and back of badge. .1 - similar badge with a deep varnish finish - a pin on the rear has been ground off. No manufacturer name or number..trams, tramways, unions, badges, atmoea, employees

1939 Cap Badge for the "Tramways Superintendent". Made from cast brass to indicate the position held by the wearer on their cap as part of their uniform. Cast in the form of the handwritten or script word/s and underlined. On the rear, silver soldered on are two brass loops at either of the badge to enable the badge to be sewn or fitted with clips onto the cap. Fitted through the loops are brass clips for securing onto a cap. Possibly indicates never been used. On the back of the back of the badge in very small letters is the name of the manufacturer - Stokes & Sons / Melbourne. Note the same manufacturer logo as for the "Tramways Superintendent", Reg. Item 1938. Used by the SEC only? Assumed collected by Les Denmead from spares held by the SEC. 1939.1 - as for 1939, but appears to have been n n ickle plated on the front and then painted with a brownish covering which has partially come away from the plating to give a burnished appearance. Only has one brass securing clip. Worksheet amended 3/8/03. Included with the worksheet, is the text panel used in the Immigration Museum display for such items and photographs used by the Museum in the production of the Trammies Exhibition brochure.tramways, trams, cap badge, hat badge, uniforms

Demonstrates the detail of the uniform of tramway/motorman workers.1940 - Cap Badge for a "Motorman". Made from a cast brass item, nickel plated to indicate the position held by the wearer on their cap as part of their uniform. Cast in the form of the handwritten or script word/s and underlined. On the rear, silver soldered on are two brass loops at either of the badge to enable it to be sewn or fitted with clips onto the cap. On the back of the back of the badge in very small letters is the name of the manufacturer - Stokes & Sons / Melbourne. Same manufacturers logo as in Reg Item 1937. Part of the ESCo company and possibly early SEC uniform. ESCo employee number on a special lapel bade - see Reg. item 1952. Not used by the SEC from 1940 - employee number on the cap but early SEC uniforms show them on the collar of the jacked - not known if this uniform adopted. See Reg. Item 1368 for photos of early SEC uniform showing badge on the neck. Assumed collected by Les Denmead from materials left over from the ESCo era in the SEC offices. 1940.1 - Item - as above, with "Stokes & Sons" stamped into metal on rear of badge. Item ex SEC. Item 1940.1 added 2/1/05. BACK - Stokes & Sonstramways, trams, cap badge, hat badge, uniforms, esco, btm, ballarat tramways

1937 - Cap Badge for a "Conductor". Manufactured by Stokes and Sons, Melbourne. Made from a cast brass item, to indicate the position held by the wearer on their cap as part of their uniform. Cast in the form of the handwritten or script word/s and underlined. On the rear, silver soldered on are two brass loops at either of the badge to enable to be sewn or fitted with clips onto the cap. On the back of the back of the badge in very small letters is the name of the manufacturer - Stokes & Sons / Melbourne. Same manufacturers logo as in Reg Item 1940. Part of the ESCo company and possibly early SEC uniform. ESCo employee number on a special lapel bade - see Reg. item 1952. Not used by the SEC from 1940 - employee number on the cap but early SEC uniforms show them on the collar of the jacket - not known if this uniform adopted. See Reg. Item 1368 for photos of early SEC uniform showing badge on the neck. Assumed collected by Les from materials left over from the ESCo era in the SEC offices. 1937.1 - Item - as above, but nickel plated, with "Stokes" stamped into metal on rear of badge. Item ex SEC. Item 1937.1 added 2/1/05. tramways, trams, cap badge, hat badge, uniforms, esco

Set of 27 Stamped enamelled round brass pieces with a hole stamped at the top and ring placed through. Used as a SEC tramways employees pass for either all Provincial tramways, Ballarat or Bendigo only. All badges have the SEC logo in the centre, organisational name (State Electricity Commission of Victoria) in white enamel and outer ring the words "Electricity Supply Department, Provincial Tramways", or "Electric Tramways Ballarat" or "Electric Tramways Bendigo". This is in blue enamel. On the rear are stamped numbers and manufacturers name - "AMOR" or "AMOR MELB" or "STOKES & SONS MELBOURNE" in the bottom portion of the pass. Items .1 -> .10, .12, .13 individually tagged. Item .11 not tagged Item .13 -> .27, single tagged, tied together with a length of string. 1941.1 - Bendigo - No. 9 - Stokes - silver background instead of gold, appears to have been used. .2 - Bendigo - No. 43 - Stokes - has been used - partially worn, has additional clip joined to main ring. .3 - Ballarat - No. 51 - Stokes - has been used, worn and chipped under main ring. .4 - Ballarat - No. 61 - Stokes - has been used, worn, and chipped on blue enamel in at least two places. .5 - Ballarat - No. 72 - Stokes - has been used, worn and chipped on blue enamel in many places - btm1941i1 for reverse side. .6 - Ballarat - No. 86 - Stokes - has been used, worn, dirt on rear - see image btm1941i2 for front side. .7 - Bendigo - No. 107 - Stokes - appears not to have been used - see image btm1941i3 for front side .8 - Bendigo - No. 108 - Stokes - ditto, but gold by SEC shield is discoloured - see image btm1941i4. .9 - Bendigo - No. 121 - Stokes - appears to have been used, more silver than 1941.8 .10 - Provincial - No. 124 - AMOR - may have been used - see image 1941i5 for front side .11 - Provincial - No. 156 - AMOR - small clip broken off at top, has been used, worn (Not tagged) .12 - Provincial - No. 306 - AMOR - no larger ring, has been used, worn and discoloured .13 - Provincial - No. 656 - AMOR MELB - has not been used, no larger ring, see image 1941i6 for back side. .14 - Provincial - No. 642 - AMOR MELB - has not been used. .15 - Provincial - No. 644 - ditto .16 - Provincial - No. 645 - ditto .17 - Provincial - No. 646 - ditto .18 - Provincial - No. 647 - ditto .19 - Provincial - No. 648 - ditto .20 - Provincial - No. 649 - ditto .21 - Provincial - No. 650 - ditto .22 - Provincial - No. 651 - ditto .23 - Provincial - No. 652 - ditto .24 - Provincial - No. 653 - ditto .25 - Provincial - No. 654 - ditto - to A. Reither for 21st from BTM 2/8/03 - see attached image btm1941i7 .26 - Provincial - No. 655 - ditto - to P.Mong for 21st from BTM 2/8/03 - see ditto .27 - Provincial - No. 564 - ditto - added 21/1/2007 from somewhere - at WAD's house 12/2006. .28 - Provincial - No. 589 - ditto - dittotramways, trams, employees pass, tickets, provincial tramways, badges

W.W.IBrass Coat of Arms on W.W.I British Royal Regiment Hat BadgeHoni Soil Pui Maly Pensebritish, w.w.i, royal regiment, badges

W.W.2Brass shoulder flash from World War II with "Australia" sign.As abovew.w.2, badge

Brass eagle with wings out-stretched Known as 'Pathfinder Badge'As abovebadge, world war i

1941 40mm 2-pounder brass anti tank gun shell case made into a vase with 5 splayed points at top the casing with the collar insignia badge on front.Insignia - Australian Commonwealth Military Forces (collar badge). Outer edge under shell - 1941 LOT 110 RM/C 2PR No1. Inner area under shell - 1941 113 11-41anti-tank, gun shell, trench art, 1941, vase

1941 40mm 2-pounder brass anti tank gun shell case made into a vase with 5 splayed points at top the casing with the collar insignia badge on front.Insignia - Australian Commonwealth Military Forces (collar badge). Outer edge under shell - 1941 LOT 113 RM/C 2PR No2 Inner area under shell - 1941 110 11-41 No/2 MK1gun shell, anti-tank, trench art, 1941, vase

Used on MMTB caps until the early 1980s, with their operations or their assigned personal employee number or crew number below. Used from the late 1910s.Demonstrates a MMTB cap badge.Badge or cap badge, nickel-plated brass? for MMTB caps - letters TB combined together. Has two metal lugs soldered onto the rear to enable it to be fixed into a cap. In the middle on the rear the manufacturer's name "STOKES" is stamped into the badge. Set of 2. tramways, trams, mmtb, operations, badges, crews, drivers, conductors, personnel, employees

Used by the MMTB to indicate to Inspectors and the public, the driver or conductor traffic number or their personnel number. This number would appear on all reporting documents.Demonstrates a MMTB employee or traffic number badge.Badge number, MMTB style, "1469", plated brass to give a gold finish, with the numbers fixed to a bar top and bottom and two lugs on the rear to clip into a cap. Made by Stokes and Sons Melbourne - has been stamped onto the rear. Has one of the lugs missing. tramways, trams, mmtb, operations, badges, crews, drivers, conductors, personnel, employees

Used by the MMTB to indicate to Inspectors and the public, the driver or conductor traffic number or their personnel number. This number would appear on all reporting documents.Demonstrates a MMTB employee or traffic number badge.Set of two badges - numbered, "2116" and "2119", nickel plated brass to give a silver finish, with the numbers fixed to a bar top and bottom and two lugs on the rear to clip into a cap. Have been mounted onto a card with the clips used in practice. Made by Stokes and Sons Melbourne - has been stamped onto the rear. tramways, trams, mmtb, operations, badges, crews, drivers, conductors, personnel, employees

Used by the MMTB as part of a tram crew or inspectors uniform .Demonstrates a MMTB uniform button.Set of two uniform buttons - two pressed metal sections provided with a lug or eye to sew the button onto a uniform jacked. The nickel-plated badge is stamped "Stokes & Sons Victoria" while the brass button is stamped "Stokes Australia". The brass button is missing the sewing eye or lug. tramways, mmtb, crews, drivers, conductors, uniforms, buttons

Given to members of the Australian Tramway & Motor Omnibus Employees Association union wear on their uniforms. The union badge was permitted to be worn on a uniform.Demonstrates a MMTB uniform button.Badge was made on a brass/gold backing with painted enamel on the front. On the central portion of the badge, had the ATMOEA logo, with the words "Vic" with red enamel backing, and on the outer edge of the badge "Aust Tramway & Motor Omnibus Employees Association" with a royal blue background. The back of the badge is fitted with a spring retaining clip. The plastic bag is most likely what it was delivered in and was handed to Union members. There are no manufacturer details. tramways, mmtb, crews, drivers, conductors, uniforms, badges, unions, atmoea

Brass R.A.A.F. Officer's hat/cap badge with crown on top of spread-out eagle with 2 feathers under each side.r.a.a.f., badge

This item contributes to an understanding of those involved in the war in Vietnam.Red wood plaque shaped as a shield; red and gold crown atop of badge with sword, rifle and eagle. Brass coloured dedication with black printing.AIRFIELD DEFENCE ASSOC AUSTRALIAairfield defence assoc australia, vietnam