Showing 612 items
matching silver badge
-
Buninyong Visitor Information Centre
Ceremonial object - Medallion, Stokes Badges, Celebrating 150 Years 1873-2023 Buninyong Primary School, 2023
Medallion produced for the 150th Anniversary of the Buninyong Primary School in 2023.A large silver coloured medallion with a hook at the top. Early image of the school depicted in relief on the reverse. Two examples in the collection.Buninyong Primary School 150 Year 1873-2023buninyong primary school, buninyong state school, education -
Buninyong Visitor Information Centre
Ceremonial object - Medallion, Stokes Badges, Buninyong School Centenary 1873 - 1973, 1973
Commissioned to mark the centenary of the Buninyong State (Primary) School, no. 1270.Silver coloured medallion with Buninyong School Centenary 1873 - 1973 and laurel wreath on the front and a relief image of the original school building on the reverse.Buninyong School Centenary 1873 - 1973; Stokes, Melb. on obverse.buninyong state school, buninyong primary school, education -
Melbourne Tram Museum
Badge - MTOCo lapel, 1900's
Lapel Badge for the Melbourne Tramway and Omnibus Co. staff. Has an abbreviation of "MTOCo" to indicate the tramway operator and worn as part of their uniform. No manufacturer's name on the rear of the badge, though possibly made by Stokes & Sons Melboune. Three copies held, two fitted with a clip - as shown in the photograph. See Reg Item 1923 for a photo showing how it was used for a Conductor's uniform.Demonstrates a item worn on a MTOCo Uniform. Made from a cast brass item, nickel plated, cast in the form of handwritten or script letters. On the rear, silver soldered on are two brass loops at either end of the badge to enable the badge to be sewn or fitted with clips onto the cap or the uniform.trams, tramways, uniforms, cable trams, mtoco -
Melbourne Tram Museum
Uniform - Badge, 1900's
Cap Badge for the Melbourne and Tramway Omnibus Co staff. Has abbreviation of "MTOCo". Made from a cast brass item, nickel plated, part of their uniform. Cast in the form of the handwritten or script word/s and underlined. On the rear, silver soldered on are two brass loops at either of the badge to enable badge to be sewn or fitted with clips onto the cap. No manufacturer's name on the rear of the badge. Two copies held, one fitted with a clip - as shown in photograph. See Reg Item 1923 for a photo showing how it was used for a Conductor's cap.trams, tramways, cap badge, hat badge, uniforms, mto co -
Melbourne Tram Museum
Uniform - Badge, c1917
Lapel Badge for the Tramway Board (predecessor to MMTB and the successor to the Melbourne Tramway and Omnibus Co. staff. Has abbreviation of "TB". Made from a cast brass item, nickel plated to indicate the position held by the wearer as part of their uniform. Cast in the form of the handwritten or script word/s and underlined. On the rear, silver soldered on are two brass loops at either of the badge to enable badge to be sewn or fitted with clips onto the cap or the uniform No manufacturer's name on the rear of the badge.trams, tramways, cap badge, hat badge, uniforms, tramway board -
Ballarat Tramway Museum
Badge - MTOCo lapel, 1900s
Lapel Badge for the Melbourne Tramway and Omnibus Co. staff. Has an abbreviation of "MTOCo" to indicate the tramway operator and worn as part of their uniform. Made by Stokes & Sons Melboune.Demonstrates a item worn on a MTOCo Uniform.Made from a cast brass item, nickel plated, cast in the form of handwritten or script letters. On the rear, silver soldered on are two brass loops at either end of the badge to enable the badge to be sewn or fitted with clips onto the cap or the uniform. Has the name of Stokes & Sons stamped into the rear.trams, tramways, uniforms, cable trams, mtoco -
Ballarat Tramway Museum
Functional Object - Cap Badge, Stokes & Sons Melbourne, "Tramways Superintendent", 1930's?
1939 Cap Badge for the "Tramways Superintendent". Made from cast brass to indicate the position held by the wearer on their cap as part of their uniform. Cast in the form of the handwritten or script word/s and underlined. On the rear, silver soldered on are two brass loops at either of the badge to enable the badge to be sewn or fitted with clips onto the cap. Fitted through the loops are brass clips for securing onto a cap. Possibly indicates never been used. On the back of the back of the badge in very small letters is the name of the manufacturer - Stokes & Sons / Melbourne. Note the same manufacturer logo as for the "Tramways Superintendent", Reg. Item 1938. Used by the SEC only? Assumed collected by Les Denmead from spares held by the SEC. 1939.1 - as for 1939, but appears to have been n n ickle plated on the front and then painted with a brownish covering which has partially come away from the plating to give a burnished appearance. Only has one brass securing clip. Worksheet amended 3/8/03. Included with the worksheet, is the text panel used in the Immigration Museum display for such items and photographs used by the Museum in the production of the Trammies Exhibition brochure.tramways, trams, cap badge, hat badge, uniforms -
Ballarat Tramway Museum
Badge - ESCo driver, Stokes & Sons Melbourne, 1905
Yields information about the identification methods used by the ESCo to identify their crews to public and has a strong association with the individuals who wore them over time.Pressed metal uniform badge for ESCo Drivers. Round pressed steel badge with the words "ESCo OF V. LTD." pressed into the badge around the top portion of the badge, the word "DRIVER" and number "15" pressed into the lower half of the badge -with small horizontal lines within the individual letters. Appears to have had a nickel silver finish originally. On rear badge two metal lugs have been soldered onto the badge and a leather strap with a button hole cut into to enable it to be worn on a uniform. Has words "STOKES & SONS" stamped in reverse on the lower rear of the badge. Badges of this type shown on ESCo uniforms of 1905 and through to the 20's. See Reg. item 2900 for Conductors Badge and 5280 for Driver's badge No. 49. tramways, trams, esco, drivers, badges, uniforms -
Ballarat Tramway Museum
Functional Object - Cap Badge, Stokes & Sons Melbourne, "Motorman", 1905?
Demonstrates the detail of the uniform of tramway/motorman workers.1940 - Cap Badge for a "Motorman". Made from a cast brass item, nickel plated to indicate the position held by the wearer on their cap as part of their uniform. Cast in the form of the handwritten or script word/s and underlined. On the rear, silver soldered on are two brass loops at either of the badge to enable it to be sewn or fitted with clips onto the cap. On the back of the back of the badge in very small letters is the name of the manufacturer - Stokes & Sons / Melbourne. Same manufacturers logo as in Reg Item 1937. Part of the ESCo company and possibly early SEC uniform. ESCo employee number on a special lapel bade - see Reg. item 1952. Not used by the SEC from 1940 - employee number on the cap but early SEC uniforms show them on the collar of the jacked - not known if this uniform adopted. See Reg. Item 1368 for photos of early SEC uniform showing badge on the neck. Assumed collected by Les Denmead from materials left over from the ESCo era in the SEC offices. 1940.1 - Item - as above, with "Stokes & Sons" stamped into metal on rear of badge. Item ex SEC. Item 1940.1 added 2/1/05. BACK - Stokes & Sonstramways, trams, cap badge, hat badge, uniforms, esco, btm, ballarat tramways -
Ballarat Tramway Museum
Functional Object - Cap Badge, Stokes & Sons Melbourne, "Conductor", 1905?
1937 - Cap Badge for a "Conductor". Manufactured by Stokes and Sons, Melbourne. Made from a cast brass item, to indicate the position held by the wearer on their cap as part of their uniform. Cast in the form of the handwritten or script word/s and underlined. On the rear, silver soldered on are two brass loops at either of the badge to enable to be sewn or fitted with clips onto the cap. On the back of the back of the badge in very small letters is the name of the manufacturer - Stokes & Sons / Melbourne. Same manufacturers logo as in Reg Item 1940. Part of the ESCo company and possibly early SEC uniform. ESCo employee number on a special lapel bade - see Reg. item 1952. Not used by the SEC from 1940 - employee number on the cap but early SEC uniforms show them on the collar of the jacket - not known if this uniform adopted. See Reg. Item 1368 for photos of early SEC uniform showing badge on the neck. Assumed collected by Les from materials left over from the ESCo era in the SEC offices. 1937.1 - Item - as above, but nickel plated, with "Stokes" stamped into metal on rear of badge. Item ex SEC. Item 1937.1 added 2/1/05. tramways, trams, cap badge, hat badge, uniforms, esco -
Ballarat Tramway Museum
Badge - Union badge, Wittenbach & Co, 1930's?
The badge belonged to the Donor's father - Bill Irvin, who was a SEC tram driver. Bill and his elder brother Dan, both drove trams in Ballarat. The Union badge confirmed membeship of the Union and was permitted to be worn on a uniform.Has a strong association with Bill Irvin, SEC tram driver of the 1930's and demonstrates the importance of being a union member at the time and the badge provided by the unionAustralian Tramway Employees Association (Tramways Union) badge. Badge made on a steel/ silver backing with words "Australian Tramway Employees Association" on outer edge of badge with a royal blue enamel background. In centre of badge has the Australian coat of arms with a railway type spoke wheel above the logo and underneath the coat of arms the words "Federated Australia" in a banner. Has a hole in the top of the badge for a steel ring or a method of attachment to a uniform. On back of badge has stamped into the badge "BL 42", possibly indicating Ballarat and badge number. On the base of the badge has words "Wittenbach " cast into the badge. tramways, trams, unions, badges, atea, employees, bill irvin -
Ballarat Tramway Museum
Badge - SEC pass - set of 27, AMOR, c1950?
Set of 27 Stamped enamelled round brass pieces with a hole stamped at the top and ring placed through. Used as a SEC tramways employees pass for either all Provincial tramways, Ballarat or Bendigo only. All badges have the SEC logo in the centre, organisational name (State Electricity Commission of Victoria) in white enamel and outer ring the words "Electricity Supply Department, Provincial Tramways", or "Electric Tramways Ballarat" or "Electric Tramways Bendigo". This is in blue enamel. On the rear are stamped numbers and manufacturers name - "AMOR" or "AMOR MELB" or "STOKES & SONS MELBOURNE" in the bottom portion of the pass. Items .1 -> .10, .12, .13 individually tagged. Item .11 not tagged Item .13 -> .27, single tagged, tied together with a length of string. 1941.1 - Bendigo - No. 9 - Stokes - silver background instead of gold, appears to have been used. .2 - Bendigo - No. 43 - Stokes - has been used - partially worn, has additional clip joined to main ring. .3 - Ballarat - No. 51 - Stokes - has been used, worn and chipped under main ring. .4 - Ballarat - No. 61 - Stokes - has been used, worn, and chipped on blue enamel in at least two places. .5 - Ballarat - No. 72 - Stokes - has been used, worn and chipped on blue enamel in many places - btm1941i1 for reverse side. .6 - Ballarat - No. 86 - Stokes - has been used, worn, dirt on rear - see image btm1941i2 for front side. .7 - Bendigo - No. 107 - Stokes - appears not to have been used - see image btm1941i3 for front side .8 - Bendigo - No. 108 - Stokes - ditto, but gold by SEC shield is discoloured - see image btm1941i4. .9 - Bendigo - No. 121 - Stokes - appears to have been used, more silver than 1941.8 .10 - Provincial - No. 124 - AMOR - may have been used - see image 1941i5 for front side .11 - Provincial - No. 156 - AMOR - small clip broken off at top, has been used, worn (Not tagged) .12 - Provincial - No. 306 - AMOR - no larger ring, has been used, worn and discoloured .13 - Provincial - No. 656 - AMOR MELB - has not been used, no larger ring, see image 1941i6 for back side. .14 - Provincial - No. 642 - AMOR MELB - has not been used. .15 - Provincial - No. 644 - ditto .16 - Provincial - No. 645 - ditto .17 - Provincial - No. 646 - ditto .18 - Provincial - No. 647 - ditto .19 - Provincial - No. 648 - ditto .20 - Provincial - No. 649 - ditto .21 - Provincial - No. 650 - ditto .22 - Provincial - No. 651 - ditto .23 - Provincial - No. 652 - ditto .24 - Provincial - No. 653 - ditto .25 - Provincial - No. 654 - ditto - to A. Reither for 21st from BTM 2/8/03 - see attached image btm1941i7 .26 - Provincial - No. 655 - ditto - to P.Mong for 21st from BTM 2/8/03 - see ditto .27 - Provincial - No. 564 - ditto - added 21/1/2007 from somewhere - at WAD's house 12/2006. .28 - Provincial - No. 589 - ditto - dittotramways, trams, employees pass, tickets, provincial tramways, badges