The photograph of the Commission Van is taken at the RDNS Service Centre at Chessell Street, South Melbourne. The three men are employed by the Royal District Nursing Service.In 1971 the Commission shop donated a Van to the Royal District Nursing Service (RDNS), to be used by the Maintenance crew for delivery of equipment and transporting goods and documents between RDNS Centres and Headquarters. It was also used for transporting Maintenance staff and the equipment they required to do maintenance work at RDNS Centres as needed. The Commission Van was kept at the RDNS Service Centre at Chessell Street, South Melbourne.Black and white photograph showing the side view of the Royal District Nursing Service (RDNS), Commission Van. The white snub nose Van, which has a closed passenger door and another further along, is standing with its front close to a brick building and sits on brick paving which extends onto earth. Three short windows can be seen along the top quarter of the Van. Both back doors are open. Mr. J. Grigg, with receding dark hair, is standing to the left of the photograph near the rear door, and has his hands on the hand grips of a wheelchair. Mr. J. Greet, is standing in the back of the van with his hands on the metal handles of a square metal commode as he hands it to Mr. Pincher, who has wavy short hair and is standing on the ground to his right. He has his hands on the main body of the commode. The three men are wearing their grey work coats over their clothes. In the background part of a two story dark brick building can be seen. On the ground floor, on the left, part of a dark door can be seen with a small window immediately above it, and further.above this is some light fan shaped brick work, three vertical bricks in height. To its right part of a window with the same brickwork can be seen and to the right along the building is part of a window with arched light brickwork followed by more brickwork and part of a door. Black pipework runs down some of the brickwork. Above the brickwork runs a row of light colour material, and above this part of the upper section in grey concrete can be seen.Photographers stamp. Quote No. KH 80mr j grigg, mr. j. greet, mr pincher, rdns equipment, royal district nursing service, rdns, rdns maintenance

The equipment items in this photograph are loaned out to Royal District Nursing Service (RDNS) patient's to use in their homes. They are returned to RDNS and sterilized, or cleaned with disinfectant, whichever is appropriate, once they are no longer required. The material items are given to patient's as required. Many of these items are made and donated by RDNS Auxiliary members. From its inception in 1885, the two Trained nurses (Nurses) of the Melbourne District Nursing Society (MDNS) worked in the now CBD, ie from Spencer Street to Spring Street and from Victoria Parade to Flinders Street. At that time they walked the streets and lane ways amid the slums of inner Melbourne carrying their nursing bags containing lotion, ointments, powders, liniment, bandages, dressings, a case of spirits, and the Nurse's own clean apron, soap and small towel. They supplied equipment on loan, such as earthenware hot water bottles, splints, urinals, bed pans, bed cradles, feeding mugs, and air-cushions as well as providing blankets and clean bed linen, and nightdresses and clothes as necessary. The Society was at the forefront of health care and continued to liaise with Doctors as the Society expanded. The Nurses provided high quality nursing care to a range of people, often in destitute situations, some lying on rags on the floor as they had no bed, others with just a bed and maybe a thin blanket, a chair and nothing else. Their ages ranged from babes, children, adults to the elderly. The Nurses gave medications as ordered, dressed wounds e.g. to the injured, and surgical cases, and to those with leg ulcers; attended to patients with ‘surgical ailments’ such as ‘hip disease’; gave care to those with acute illnesses such as bronchitis, pleurisy, pneumonia, measles, and scarlet fever, as well as those with chronic illnesses such as consumption (tuberculosis), heart disease, arthritis, cancer, debility, neuritis and paralysis. They educated their patients, and their Carers, in the curing and prevention of disease; Over the years items were given and equipment was loaned and demonstrated to patients, and if appropriate, to their family members to enable them to care for their loved ones in their homes. The Trained nurses had the rehabilitation of their patients in the forefront of their minds to ensure they were able to live as independently as possible in their own homes. As the years passed the Trained nurses changed from being called 'Nurse' to 'Sister' and the Society changed its name. In the 1970s, now with Royal patronage, and known as Royal District Nursing Service ( RDNS), they contracted a Private and then employed, a Physiotherapist who taught RDNS Sisters the correct transferring techniques, including the use of a hoist when this became available. RDNS Sisters taught and used these techniques in patient’s homes to undertake safe transfer of the patient and to reduce physical strain on RDNS nursing staff and family members. Each RDNS Centre had a room or shed where equipment for loan was kept, and Headquarters also kept additional equipment which could be transported to Centres as required. This black and white photograph shows some of the equipment loaned, along with some to be given, to Royal District Nursing Service (RDNS) patients as required. Rear L-R - a white long nightdress with dark embroidery and buttons on the front and embroidery on the edge of the short sleeves. Next are two wooden bath seats; a square metal commode with lid and with its round legs extended to form handles on the left and right sides. A folded dark and white striped crocheted rug hangs over one of the handles. In the centre L-R, is a metal bed cradle, a metal 4 prong walking stick, bed pans, male urinal, stack of nappies with a white child's knitted jumper hanging over them, and a doona. In the front, L-R is a grey blanket, dark coloured bed socks, a sheepskin with a white smocked baby dress sitting on it, and a white babies nightgown on a clear plastic covered white bundle. A black mat sits under these items and a cream brick wall is in the background. Barry Sutton LS 47royal district nursing service, rdns, rdns equipment, rdns auxiliaries

Pulleys were used to lift goods to and from boats and at other sites at the lightstation where hauling was undertaken. Historical images and text panels in the Wilsons Promontory Museum attest to the detailed logistics that needed to be exercised in lifting and transporting goods once they had arrived by boat at the Eastern Landing. Cranes and a flying fox were employed in the nineteenth century and updated versions of this equipment served well into the twentieth century. The first cranes to be employed at the site were built just after December 1857, when tenders were called to construct two cranes prior to the commencement of building the lightstation.The first boat landing at the promontory was built on the west side of the lighthouse, which the architect, Charles Maplestone sketched in June 1859, the same month that he announced the completion of the lighthouse. His drawing shows one of the cranes as a large structure built for heavy duty lifting. Soon the east landing became the preferred place for delivering stores, but as late as 1993 a crane, timber structures and disused heavy iron machinery remained at the old site.Large rusted iron pulley, large loop at one end and smaller loop at the other. No hook.(Sheave Block)

Pulleys were used to lift goods to and from boats and at other sites at the lightstation where hauling was undertaken. Historical images and text panels in the Wilsons Promontory Museum attest to the detailed logistics that needed to be exercised in lifting and transporting goods once they had arrived by boat at the Eastern Landing. Cranes and a flying fox were employed in the nineteenth century and updated versions of this equipment served well into the twentieth century. The first cranes to be employed at the site were built just after December 1857, when tenders were called to construct two cranes prior to the commencement of building the lightstation.180 The first boat landing at the promontory was built on the west side of the lighthouse, which the architect, Charles Maplestone sketched in June 1859, the same month that he announced the completion of the lighthouse.His drawing shows one of the cranes as a large structure built for heavy duty lifting. Soon the east landing became the preferred place for delivering stores, but as late as 1993 a crane, timber structures and disused heavy iron machinery remained at the old site.Large iron pulley with loop at one end and hook at the other, rusted.

Bob (Herman) Hymans (a former member of the Royal Netherlands Navy) was born in Bloemendaal, Holland on 30th September 1922. During World War II he fought against the Japanese in the Dutch East Indies (now Indonesia) and was imprisoned in Changi and on the Burma Railway. After gaining qualifications as a Ski Instructor, Bob arrived in Falls Creek in July 1950. Working as an Instructor and Supervisor at Bogong Lodge, Bob decided his future was in accommodation. He was successful in negotiating an indenture for land from the State Electricity Commission (SEC). It took Bob two years to build his Grand Coeur Chalet but, tragically, it was burned down in August 1961. Bob also built the first Chairlift in Australia. This was a single chairlift and the structure was built from wooden electricity poles. He was constantly full of new ideas and proposals for the village. Bob Hymans die on 7th July 2007. This Collection of documents and letters tells the story of Bob's endeavours to develop Falls Creek into the ski village it is today.This chair is significant because it is the last chair from the first chairlift ever constructed in Australia.This is the last known chair of the Alpine Chairlift built in 1957 and deconstructed in 1961. It was built by Bob Hymans from recycled SEC Poles. The chairlift had 40 chairs on the 390 metre trip to the top. It carried its first passengers on 21 July 1957. Available to all visitors, the lower end of the lift was about 90 metres above the Upper Kiewa Road and it ascended 120 vertical metres to the top terminal above the race-line. The forty chairs transported skiers continuously at a speed of 1.5 metres per second, the upward trip taking just over four minutes. Each chair has a safety bar above the rider's knees.bob hymans, australia's first chairlift, alpine chairlift

The ‘Resumatic’ brand, British made, lightweight device comprises a red pulley with attached length of white rope and harness. Information on the item indicates that it was the property of the Department of Transport, Australia. The Commonwealth Lighthouse Service was associated with the Department of Shipping and Transport in 1951 and the Navigational Aids Branch of the Department of Transport in 1972 so the harness may date to this period. The easily operated descent device was used for automatic, controlled descents from overhead structures, such as towers and other buildings and did not require a power source or tools. The user needed to make sure the unit is secured to an anchor point so that the cable could be dropped to the ground. As soon as it was secured the user could put on the support harness, step off the edge and travel down to safety. The device complements a number of other items of rescue equipment held in the wider Parks Victoria lightstation collection which attest to the dangers inherent in lightstation work and necessity for first aid kits, resuscitators, life buoys, life jackets and other devices such as harnesses and pulleys used for moving people. These include a bosun’s chair and harness with pulley, Royal Flying Doctor first aid cabinet, resuscitator kit and case, first aid kit, lifebuoy and cork fragments x 4 all in the Gabo Island collection; a rescue basket, resuscitation kit and case, and pulleys and ropes at Cape Otway; rescue stretcher made of bamboo at Wilsons Promontory; and a rescue anchor at Cape Schanck. The Cape Nelson rescue harness, although unique in the broader lightstation collection, is a relatively common device that is still manufactured more or less the same in England. It has second level contributory significance for offering insights into the various methods used in rescue operations by Victoria’s lightstations.Length of white rope attached to a harness and a red pully device.yes

The black and white manual typewriter is made of plastic and metal by the Swiss company,Hermes. The model name ‘Ambassador’ and the series number M82, indicate that the typewriter was made sometime between 1953 and 1965. It demonstrates the working operations of the lightstation under the Commonwealth Lighthouse Service when it was managed by the Department of Transport, which introduced a number of modernising initiatives during this period.It has second level contributory significance for its historic value as an original item of office equipment. It demonstrates the working operations of the lightstation under the Commonwealth Lighthouse Service when it was managed by the Department of Transport, which introduced a number of modernising initiatives during this period.1. Black and white plastic and metal typewriter. 2. Grey vinyl typewriter cover.2. On cover,"HERMES / Ambassador / FABRICATION SUISSE / MADE IN SWITZERLAND / D" : 1. On typewriter," M82". On label, " C.of A / D.O.T. 143851".

A booklet with a red cover and black print. There are extensive instructions on the cover which include distribution details and dates on which these instructions came into effect,fictionThe Public Transport Corporation (PTC) was a Victoria State Government owned statutory authority formed under the Transport Act 1983 which operated passenger and freight trains, trams and bus services. It was established on 1 July 1989. This memo was effective as from Sunday 16th May, 1993 and pertained to rules instructions and operating procedures regarding air brake equipment and train examination requirements. As noted on the cover: "Part One - Supersedes Automatic air brake rules, pages 479-495 of Book of rules and regulations. -- Part Two - Supersedes Air brake orders, pages 189-198 of General appendix." The cover bears the signatures of M. Digging, Safeworking Superintendent and G. De Bont, Group Manager, Freight Fleet Maintenance.locomotive manuals, victorian railways, public transport corporation victoria, victorian railways -- rules and practice.

The first bicycles arrived in Australia in the 1860s. They gradually gained in popularity and by the 1890s they offered a cheap and relatively comfortable mode of transport. Far being just a means of leisure, long distance cycle travelling became a fact of life in rural areas for people such as sheep shearers and other agricultural labourers with migratory work. The bicycle and swag travelled much of Australia on dusty dirt tracks, long before the automobile was introduced. Today the bicycle continues to be an important item for general, cheap transport, sport and leisure. Tool kits such as those shown in the item, were and important piece of equipment for bicycle enthusiasts, particularly on a longer ride where assistance may not be close by if the rider experienced a punctured tyre. John Bull Rubber Co. Ltd. was a British tyre manufacturer based in Leicester. It was established in 1906 and was originally named Leicester Rubber Company. In 1915, a new factory was built in Evington Valley Road as indicated on the repair outfit tin in this kit. It was renamed John Bull Rubber in 1934 after its popular product of the same name. In 1958, the company was acquired by Dunlop Rubber. A leather bag containing tools and 2 tins containing rubber patches to repair bicycle tyres. The bag has 2 straps and metal buckles to attach it to the back of the bicycle seat.On tin 1: "The John Bull / Repair Outfit/ John Bull Rubber Co. Ltd./ Evington Valley Mills, Leicester" On tin 2: "ZENITH Repair Outfit / For Cycle and Rubber Repairs/ Self Vulcanizing" On tin 3: Around the DUNLOP logo "Six Self Lighting/ Patch Heat Units / For Cycle Tube/ Vulcaniser"bicycle history, bicycle repairs, john bull rubber, cycling leisure

North east Victoria was a major dairy producing region in the late nineteenth century. The first iteration of the Wodonga Butter Factory Ltd was established in 1892. Dairy was sent from farmers across the district for processing at the factory in Wodonga in the 1890s. Victorian creameries regularly exported frozen butter to London, stock was transported by rail for sale in Melbourne, and of course sold and consumed locally. E.W. Mann, of the prominent local Wodonga family, was a shareholder and was closely involved in the establishment of the Wodonga Butter Company. Many families living on farms also owned their own cow, and had equipment to process their own dairy products at home. This item has strong links to the history of Wodonga and north east Victoria. It has interpretative potential in the areas of local agricultural history, and the social history of food and farming.A wooden butter churn with metal turning handle, and two butter paddles and removal lid.butter, butter churn, dairy, cream, milk, cow, agriculture, farms, farmers, farm, food, social history, food history

The Fred Rochow Railways Collection incorporates photos related to the operation of the Wodonga Railway Station including different types of trains and railways staff C. 1930 – 1990. It was donated to the Wodonga Historical Society by Fred Rochow, a railwayman who spent many years based in Wodonga. He joined the Victorian Railways on 17th June l947 and retired in 1988. For some time, he was a member of the Australian Federated Union of Locomotive Enginemen and served a term as a member of the Trades Hall Council. He had an extensive knowledge of the struggles that took place to achieve better conditions for railway workers. Fred worked for many years as a fireman and then worked his way up the ranks to driver, experiencing many changes from the days of steam locomotives through to diesel trains, locomotives and even the modern XPT train. He worked throughout Victoria at different stages of his career, with his final working years focused on the northeast of Victoria and the Albury to Melbourne line. After his retirement, Fred continued to share his love of steam miniature trains with the community.This collection has local and statewide significance as it captures images of trains, locomotives and personnel who operated the railway services in Wodonga and throughout Northeast Victoria. The railways played a critical role in opening up Victoria and connecting Australia for trade, business, social communication and transport.The space on the left was storage space for machinery for the Snowy Mountains Hydro Electric Scheme. A special train was used to cart wide loads such as turbines, and trucks were made for widening when required. Equipment was loaded onto trains t the docks in Melbourne. Cudgewa Line -The Cudgewa railway line opened in stages between 1889 and 1921. The first section from Wodonga to Huon opened on 10 September 1889. It was extended to Bolga on 18 July 1890, Tallangatta on 24 July 1891, Shelley on 13 June 1916 (the highest station in Victoria), Beetomba on 10 April 1919 and Cudgewa on 5 May 1921. In 1919, the line was used to carry materials for the construction of Hume Weir, and three years later a spur line connecting Ebden to the weir was opened. In the 1960s, Cudgewa became the railhead of materials for the Snowy Mountains Scheme. The last passenger service from Wodonga to Tallangatta ran on 30 September 1961 The turntable and passenger platform at Cudgewa were abolished in 1976.railways wodonga, fred rochow, cudgewa station, snowy mountains hydro electric scheme

The Wodonga Historical Society Haeusler Collection provides invaluable insight into life in late nineteenth and early twentieth century north east Victoria. The collection comprises manuscripts, personal artefacts used by the Haeusler family on their farm in Wodonga, and a set of glass negatives which offer a unique visual snapshot of the domestic and social lives of the Haeusler family and local Wodonga community. The Haeusler family migrated from Prussia (Germany) to South Australia in the 1840s and 1850s, before purchasing 100 acres of Crown Land made available under the Victorian Lands Act 1862 (also known as ‘Duffy’s Land Act’) in 1866 in what is now Wodonga West. The Haeusler family were one of several German families to migrate from South Australia to Wodonga in the 1860s. This digital image was produced from one of the glass negatives that form part of the collection, probably taken by Louis Haeusler (b.1887) with the photographic equipment in the Wodonga Historical Society Haeusler Collection. This item is unique and has well documented provenance and a known owner. It forms part of a significant and representative historical collection which reflects the local history of Wodonga. It contributes to our understanding of domestic and family life in early twentieth century Wodonga, as well as providing interpretative capacity for themes including local history and social history.Digital image created from the Haeusler Glass negative collectionwodonga pioneers, haeusler family, glass negatives, dry plate photography, horse and buggy, transport

The Wodonga Historical Society Haeusler Collection provides invaluable insight into life in late nineteenth and early twentieth century north east Victoria. The collection comprises manuscripts, personal artefacts used by the Haeusler family on their farm in Wodonga, and a set of glass negatives which offer a unique visual snapshot of the domestic and social lives of the Haeusler family and local Wodonga community. This digital image was produced from one of the glass negatives that form part of the collection, probably taken by Louis Haeusler (b.1887) with the photographic equipment in the Wodonga Historical Society Haeusler Collection. This item is unique and has well documented provenance and a known owner. It forms part of a significant and representative historical collection which reflects the local history of Wodonga. It contributes to our understanding of domestic and family life in early twentieth century Wodonga, as well as providing interpretative capacity for themes including local history and social history.Digital image created from the Haeusler Glass negative collection. Ernestina Haeusler and her daughter in a horse and buggy. The family home in Wodonga West is in the background.wodonga pioneers, haeusler family, glass negatives, dry plate photography, ernestina haeusler, pioneer transport

The Wodonga Historical Society Haeusler Collection provides invaluable insight into life in late nineteenth and early twentieth century north east Victoria. The collection comprises manuscripts, personal artefacts used by the Haeusler family on their farm in Wodonga, and a set of glass negatives which offer a unique visual snapshot of the domestic and social lives of the Haeusler family and local Wodonga community. This digital image was produced from one of the glass negatives that form part of the collection, probably taken by Louis Haeusler (b.1887) with the photographic equipment in the Wodonga Historical Society Haeusler Collection.This item is unique and has well documented provenance and a known owner. It forms part of a significant and representative historical collection which reflects the local history of Wodonga. It contributes to our understanding of domestic and family life in early twentieth century Wodonga, as well as providing interpretative capacity for themes including local history and social history.Digital image created from the Haeusler Glass negative collection. A hooded buggy carrying an unidentified couple and their baby.haeusler family, glass negatives, dry plate photography, transport, horse and buggy

North east Victoria was a major dairy producing region in the late nineteenth century. The first iteration of the Wodonga Butter Factory Ltd was established in 1892. Dairy was sent from farmers across the district for processing at the factory in Wodonga in the 1890s. Victorian creameries regularly exported frozen butter to London, stock was transported by rail for sale in Melbourne, and of course sold and consumed locally. E.W. Manns, of the prominent local Wodonga family, was a shareholder and was closely involved in the establishment of the Wodonga Butter Company. Many families living on farms also owned their own cow, and had equipment to process their own dairy products at home. Milk cans such as this one were used to store and transport milk from farms to dairies and butter factories for processing.This item represents the history of local industry in Wodonga and north east Victoria. A large metal milk can with handlesmilk, butter, cream, dairy, milk can, farming, farm, cow, rural, agriculture, wodonga

Established in 1950, the Department of Supply headquarters transferred to Canberra in January 1968 and was dissolved in 1974. It was superseded by the Department of Manufacturing Industry and Department of the Special Minister of State. The Department was a Commonwealth Public Service department, staffed by officials who were responsible to the Minister for Supply. The department's main function was to support Australia's Navy, Army and Air Force in defence production, research and development, purchas­ing, transport and storage. The Department was also the Commonwealth Disposals Authority. Finally, the Department was responsible for the Australian Antarctic program. Bendigo was the site of an Ordnance Factory and manufactured and reconditioned naval guns and mountings, turbine gears for large ships, general heavy engineering work, large fabricated structure and missile handling equipment. The factory was managed in 1970 by R.I.M Moss. The department may have had an office in the former Bendigo Post Office now the Bendigo Visitor Information Centre.Blue, felt or wool peaked service cap with woven band and plastic strap. Small brass buttons. The cap has a synthetic lining around the crown and on the roof of the cap. Marked on the inside with the maker's details.bendigo post office, city of greater bendigo uniform

A bogger is a heavy-duty piece of equipment used in underground mining to transport rocks, ore, and other materials from the digging face to processing facilities or loading areas. A bogger operator is an individual who controls the machinery used to transport materials.Colour photocopy of original photo. Image shows red load haul dump loader, pictured parked on a mine road at the Kangaroo Flat Gold Mine site. Date stamp on bottom RH corner: 21/5/1999.western mining corporation, goldmining, capping, shaft, mining regulations, kangaroo flat gold mine, 1999

Reproduction print of HMAS Sydney in Korean waters launching Hawker Sea Fury fighters. Sydney was a Majestic-class light aircraft carrier operated by the Royal Australian Navy (RAN). She was built for the Royal Navy but was not completed before the end of World War II. The carrier was sold to Australia in 1947, completed and commissioned into the RAN in 1948. From late 1951 to early 1952, she operated off the coast of Korea during the Korean War, making her the first carrier in the RAN, to see wartime service. The Donor, Errol DREHER served with the RAN on board HMAS Sydney during the Korean War.HMAS Sydney was the first of three conventional aircraft carriers to serve in the RAN, and operated as the navy's flagship during the early part of her career. Retasked as a training vessel following the 1955 arrival of her modernised sister ship, HMAS Melbourne, Sydney remained in service until 1958, when she was placed in reserve as surplus to requirements. The need for a sealift capability saw the ship modified for service as a fast troop transport, and recommissioned in 1962. In 1965, she sailed on the first voyage to Vũng Tàu, transporting soldiers and equipment to serve in the Vietnam War. 25 voyages to Vietnam were made between 1965 and 1972, earning the ship the nickname "Vung Tau Ferry". Sydney was decommissioned in 1973, and was not replaced. Brown timber frame containing blue poster with image of ship and plane at seaHMAS Sydney in Korean waters 1951-1952 Painting by Roy Honisett, courtesy Australian War Memorial Royal Australian Navy 75th Anniversaryhmas sydney, korea, royal australian navy

When the ship Schomberg was launched in 1855, she was considered the most perfect clipper ship ever to be built. James Blaine’s Black Ball Line had commissioned her to be built for their fleet of passenger liners. At a cost of £43,103, the Aberdeen builders designed her to sail faster than the quick clippers designed by North American Donald McKay. She was a three masted wooden clipper ship, built with diagonal planking of British oat with layers of Scottish larch. This luxury vessel was designed to transport emigrants to Melbourne in superior comfort. She had ventilation ducts to provide air to the lower decks and a dining saloon, smoking room, library and bathrooms for the first class passengers. At the launch of Schomberg’s maiden voyage, her master Captain ‘Bully’ Forbes, drunkenly predicted that he would make the journey between Liverpool and Melbourne in 60 days. Schomberg departed Liverpool on 6 October 1855 with 430 passengers and 3000 tons cargo including iron rails and equipment intended the build the Geelong Railway and a bridge over the Yarra from Melbourne to Hawthorn. The winds were poor as Schomberg sailed across the equator, slowing her journey considerably. She was 78 days out of Liverpool when she ran aground on a sand-spit near Peterborough, Victoria, on 27 December; the sand spit and the currents were not marked on Forbes’s map. Overnight, the crew launched a lifeboat to find a safe place to land the ship’s passengers. The scouting party returned to Schomberg and advised Forbes that it was best to wait until morning because the rough seas could easily overturn the small lifeboats. The ship’s Chief Officer spotted SS Queen at dawn and signalled the steamer. The master of the SS Queen approached the stranded vessel and all of Schomberg’s passengers were able to disembark safely. The Black Ball Line’s Melbourne agent sent a steamer to retrieve the passengers’ baggage from the Schomberg. Other steamers helped unload her cargo until the weather changed and prevented the salvage teams from accessing the ship. Local merchants Manifold & Bostock bought the wreck and cargo, but did not attempt to salvage the cargo still on board the ship. They eventually sold it on to a Melbourne businessman and two seafarers. After two of the men drowned when they tried to reach Schomberg, salvage efforts were abandoned.32 In 1975, divers from Flagstaff Hill, including Peter Ronald, found an ornate communion set at the wreck. The set comprised a jug, two chalices, a plate and a lid. The lid did not fit any of the other objects and in 1978 a piece of the lid broke off, revealing a glint of gold. As museum staff carefully examined the lid and removed marine growth, they found a diamond ring, which is currently on display in the Great Circle Gallery.33 Flagstaff Hill also holds ship fittings and equipment, personal effects, a lithograph, tickets and photograph from the Schomberg. Most of the artefacts were salvaged from the wreck by Peter Ronald, former director of Flagstaff Hill. The Schomberg, which is on the Victorian Heritage Register (VHR S612), has great historical significance as a rare example of a large, fast clipper ship on the England to Australia run, carrying emigrants at the time of the Victorian gold rush. She represents the technical advances made to break sailing records between Europe and Australia. Flagstaff Hill’s collection of artefacts from the Schomberg is significant for its association with the shipwreck. The collection is primarily significant because of the relationship between the objects, as together they have a high potential to interpret the story of the Schomberg. It is archaeologically significant as the remains of an international passenger Ship. It is historically significant for representing aspects of Victoria’s shipping history and for its association with the shipwreck and the ship, which was designed to be fastest and most luxurious of its day Small brass horse harness disc 1½" in diameter. Slight verdigris and encrustation. Recovered from the wreck of the Schombergwarrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, schomberg, shipwrecked-artefact, clipper ship, black ball line, 1855 shipwreck, aberdeen clipper ship, captain forbes, peterborough shipwreck, ss queen, horse harness, horse brass

Report - 10 A4 photocopied pages titled "Friends of the W class Trams Policy Statement" undated, signed by Don Gibson. Looks at the fleet after the delivery of all the B class trams, numbers of cars required for service, issues, a requested approach, equipment and their request - continue to run W class trams, store Z1 and Z2 trams. Provides a statement of the trust's policy - classification, present threat, Met Proposal, comparison with Z class trams, tables of costs for each type of tram, options, power consumption, ride, life span, crew costing, public support, views on upgrading, conclusions. Notes that Mr. Peter. Spyker was Minister for Transport at the time and that B class still being delivered - completed 1994. Mr Spyker was Minister from 1990 to 1992 - document c1991.trams, tramways, w class, b class, z class, national trust, the met

Set of two documents issued by M>Tram, about the launch of the D class trams in 2004, with M>Tram and M>Moving Melbourne and Siemens logos. .1. - Two sheet printed in colour on white paper, technical pamphlet titled "Siemens - New trams - Technical Specifications", giving technical details of the D class three section and five section trams, numbers delivery, dimensions, capacity, speed, motors, wheels, floor height, used life and delivery timing. Details the construction of the tram, traction / wheel power supplies, control equipment and features of the tram. .2 - Two sheet Press or media release titled "Minister launches the longest tram in the southern hemisphere", dated 3/3/2004, about the Minister for Transport, Peter Batchelor, launching the new D2 tram. Gives details of the trams, their deployment, and order details. Quotes Bernie Carolan as the M>Tram Managing Director. The bottom of the sheet notes that Receivers and Managers had been appointed to the former National Express Companies.trams, tramways, d class, siemens, m>tram, specification, national express

Book - 24 pages - centre stapled, plasticized cover and pages, full colour with rounded corners on the right hand side for use in pocket, titled "Myki Operator Pocket Information Guide" issued at the time when Myki was first introduced to Melbourne late 2009 as it discusses the use of Short Term tickets. Notes the various types of cards, the various types, purchasing and topping up, equipment, questions and where to learn more. Has the various Myki and Victorian Government logos. Appears to have been produced for the public rather than just staff.trams, tramways, tickets, myki, metcard, short trip tickets

Report or introduction to the Public Transport Corporation "AVM Centre", single page A4 photocopied sheet, giving details of the Centre, history, staffing, facilities, wages, computer equipment and power supply back ups. Notes the history of the building. Automatic Vehicle Monitoring, Cable trams, Nicholson St.trams, tramways, ptc, avm, automatic vehicle monitoring, nicholson st

Manila folder with reports on the development of Met Ticket between 1990 and 1995. .1 - "Met Ticketing Taskforce – final Report" - May 1991 - A4 - 20 pages + card cover with letter dated 23 August 1991, providing the report along with 3 page press statement from the Transport Minister Peter Spyker. .2 - Pamphlet – The Met – Fact Sheet – “Automated Ticketing” - four page A4 printed document providing facts about the forthcoming Metcard system - c1994, .3 - Letter from John Prideaux AMWU Rep 16/3/1991 - To John Andrews Met Ticket steering committee - A4 photocopy - regarding the submission to the Met Ticketing Task Force. .4 - 60 page double side document printed on grey paper - Submission to Met Ticketing Task Force 26/10/1990 - Report on the Met Ticketing Union Working Party. Could be missing some sheets. .5 - Memo – John Andrews Trades Hall Liaison Office – to Secretaries – Public Transport Unions with a draft submission (20 pages) dated 12/2/1991. .6 - Met Ticketing Taskforce - Options for a new ticketing system for public transport in Melbourne Dec. 1990 – full detail - 45 pages. .7 - ditto - A summary - 11 pages - Dec. 1990. .8 - Met Ticketing Taskforce - Principles and Introduction to Ticketing Systems – Sept. 1990 - September 1990 - 10 pages. .9 - Letter from Trades Hall – 1/8/1990 - photocopy from John Andrews - Met Ticketing Review = Union Co-ordinating Committee - cc John Prideaux - has John's notes on rear, about the process and who was involved. .10 - Submission to Met Ticketing Task Force 26/10/1990 - Report of the Met Ticketing Union Working Party - combined public transport unions - 26/10/1990 - 60 pages - has notes on rear sheet. .11 - Report of the Met Ticketing Union Working Party - 8 pages. .12 - Working Paper No. 15 prepared for Met Ticketing Taskforce - Met ticketing costings - 24/10/1990 - 4 pages. .13 - Notes on Ticket system discussions - hand written notes, including a diagram of a ticket. .14 - Fax from Martin Gray to Union working party members - meeting times - lists members of the committee. .15 - Pamphlet – The Met – Fact Sheet – “Automated Ticketing” - single page A4 printed document providing facts about the equipment to be fitted to trams - has a drawing showing the equipment location on a tram.Folder with title in black felt pen.trams, tramways, the met, ptc, metcard, tickets, unions

Magazine - 24 pages - A4 full gloss paper - central stapled titled "ASEA Journal 1977 - Vol. 50 - No. 4", published by ASEA Pty Ltd. Has an article "New Trams for Melbourne" - written by Lars Friden, ASEA Transport division and Ross Coltman of ASEA Lilydale. Includes information on the tram itself, background, contractors, design, equipment, control equipment, internal and external photographs, under floor layout, bogies, electrical diagrams, panels, and layouts. See also Reg item 1603 for September 1976 issue about the 50th Z class delivery. 2nd copy added 10-1-2019trams, tramways, asea, sweden, mmtb, z class, electrical equipment, controllers

Report - 149 A4 pages, brown comb bound, orange card covers with two pasted on labels on the front cover. Titled "Chopper Control for Trams". Funded by the Australian Government Transport (Planning and Research) Act 1974, prepared by the MMTB Engineering Department Technical Services Department. Gives an introduction to chopper control technology, summary of the findings of the study, 25% saving in energy. Has a table of contents on page 8, many graphs, including impact of regeneration on W class tram, electromagnetic impact and many photographs of the test equipment. Includes the test program.Front and back covers stamped "Tramway Workshop Library Preston", and in top right hand corner in ink "(Z Tram #5) (1977) " and in pencil "Spare Copy"trams, tramways, mmtb, reports, testing, preston workshops, chopper control, controllers, z class, tram 5

Report - 3 A4 sheets - photocopy - of "Scope of Work - Major Overhaul - W class Tram Mandatory Work" - lists work to be done on a W class tram during a major overhaul - c August 1993, and re tram 909. VicSig.net - accessed 22-7-2016 notes: 1993 - Friday, 27th August Released from Preston Workshops after a major overhaul.has in ink on top "Re Tram #909" and "Received 29/8/93 from" and on rear sheet "fibreglass roof work was additional"trams, tramways, w class, overhauls, preston workshops, equipment

Report - 4 A4 sheets - showing the monthly and annual usage of various W class tramcar components: Governor Linebreaker R/C Coil R/C Unit Relay Valve Governor tipshas in ink on top "found Feb. 1992"trams, tramways, w class, overhauls, preston workshops, equipment