Keys: 10 x 10 x 20 Plaque: TR10FA 628,938 MODEL V TR10FA Made in USA by Marchant Calculators Inc. Oakland, California, USA

.1) Medal box .2) Medal box insert .3) Medal, USA Bronze Star. .4) Medal, miniature, USA Bronze Star. .5) Ribbonmedals military, usa bronze star, ron mills collection

United States of AmericaUSA Prisoner of War Medal, minature with ribbon on a pin.numismatics-medals-military, metalcraft, pow, passchendaele barracks trust

William Corbould, the original owner of this newsheet, was a student of the Ballarat School of Mines. Further information on Corbould can be found on the University of Ballarat Honour Roll (http://guerin.ballarat.edu.au/curator/honour-roll/honourroll_Corbould,William.shtml)Four page newspaper published in New York, USAIn pencil on the front page below the mast 'W. Corbould'new york, the sun, william corbould, shipping, new york bank note table

USA Khaki hession with shoulder strap. Labelled A.K.Leitchequipment

USA Green Beret (part of uniform complete U708)headgear, vietnam, army

USA Legion of Merit. (Exceptionally Meritorious Conduct. )(Rosette ???)medals, 1941-now., general

Dustoff - USA Wounded being removed from Combatphoto, vietnam, army

USA Navy Master Chief Dress Blue Uniformuniform

USA Army Staff Sargeant Green Dress Uniformuniform

USA Marine Master Sergeant Full Dress Uniform.uniform

Canvas. Long Black (pair) USA (use on UC009)uniform, ww2, us army

Colour slide in a mount. Unknown location, possibly USAslide, robin boyd

Colour slide in a mount. Unknown location, probably USAslide, robin boyd

Colour slide in a mount. Unknown location, probably USA04819 / Encircled 15 (Handwritten)slide, robin boyd

Colour slide in a mount. Interior of church, possibly USA2slide, robin boyd

Robin Boyd was invited to be a judge on the AIA-Sunset Western Home Awards Program (see correspondence item D416). Robin and Patricia Boyd travelled to California in July 1965. They also visited Japan.Colour slide in a mount. Parked cars, California, USAMade in Australia / 27 / JUL 65M / Encircled 18 (Handwritten)california, slide, robin boyd

Climax geared locomotive No. 1694 in active service on special occasions - stored at Emerald Station A Miraculous Survivor Climax locomotive No.1694 is a miraculous survivor of a rare breed of steam locomotive. For about 100 years from the mid-1850s sawn timber was carted from Victorian sawmills to the nearest railway station by timber tramway. These tramways were generally very rough, steeply graded, sharply curved, and of narrow gauge. Many had wooden rails, and horses provided haulage. The better ones used steam locomotives. In all about fifty steam locomotives are known to have worked on Victorian timber tramways. These locomotives were usually somewhat peculiar - made to cope with arduous, rough conditions, rather than speed. Climax locomotive No.1694 is the only one of these locomotives to survive intact. It was built in 1928 by the Climax Manufacturing Company, Corry, Pennsylvania, USA, for the Forests Commission of Victoria. The distinctive feature of the Climax locomotive is that the cylinders do not directly connect to the driving wheels. Instead they drive a cross shaft near the centre of the locomotive. From there the drive is transmitted to the small driving wheels through rotating shafts, universal joints, and bevel gears. The driving wheels are mounted in two four-wheel bogies so that they can easily follow sharp curves in the track. None of these features are found in normal steam locomotives. The result is a locomotive that is extremely powerful for its size, and that will cope with sharp curves and steep grades with ease. But this is at the cost of speed, Climax locomotive No.1694 is just about flat-out at 13 km/h (8 mph). Climax Locomotive Built in 1928 for the Forests Commission of Victoria and painted all-over black with the name CLIMAX painted on the sides of the cab in white block letters, this locomotive was issued to the Tyers Valley tramway which branched off the Moe to Walhalla line at Collins Siding. This locomotive was withdrawn from service in 1949 following the closure of the tramway and in 1950 it travelled from Tyers Junction to Collins Siding to Erica where it remained stored until 1965. Loaned to the Puffing Billy Preservation Society for its Steam Museum, it was taken to Menzies Creek in 1965 where it remained until 1982 when the Emerald Tourist Railway Board bought it and transferred it to Belgrave for restoration. It was returned to service for special use on the Belgrave to Gembrook line in 1988 painted in its original all-over black livery, except that the word “Climax” on the sides of the cab was now painted in the style of the Climax Manufacturing Co., a style that this locomotive had never carried.Historical - Industrial railway - Forests Commission of Victoria, Timber Logging Climax Locomotive Climax geared Steam locomotive made of steel and wrought iron Climax 1694climax locomotive works, climax, geared steam locomotive, puffing billy, climax locomotive no. 1694, steam locomotive

Twelve page booklet or pamphlet, black and white with dark blue overprinting, titled "PCC New Streamliner", giving details of the new Presidents Conference Committee (PCC) type of tramcar. Produced by the Transit Research Corporation of New York. Outlines the story of the tramcar type, its ride, safety aspects, illumination, heating and ventilation, windows, seat, wide aisles. On the rear covers lists the USA and Canadian cities that the vehicle has been sold too. Probably mid 1940's.Has AETA stamp on front cover with the letters "4J1" in ink as well.trams, tramways, pcc, transport equipment, tramcars, usa

Vietnam conflict.Vietnam conflict00128.1 USA Camouflage jacket 2 chest pockets, black buttons with black buttons down the front. Has Vietnam cloth badge on left shoulder. 00128.2 Medal. Inscribed United States of America (reverse), and Republic of Vietnam service (front) Colours are green, red & yellow. 00128.3 Medal Only inscription, National Defence. Colours, red, white & blue and yellow.

Kite Team Invisible Wind from Portland Oregon USA which competed in the International Kite Festival Dustan Tackett Al Washington Rick Tackett and Stephen Bates Lakes Entrance Victoria. Drum band performing at the International Kite Festival venue near the Footbridge Lakes Entrance number 04049.1 size 9x 11.5 cmBlack and white photograph of Kite Team Invisible Wind from Portland Oregon USA which competed in the International Kite Festival Dustan Tackett Al Washington Rick Tackett and Stephen Bates Lakes Entrance Victoria. Also 2 other photos , Drum band and people under large inflatable ball festival, sports, kites, events, beaches

Cyrus Chambers was a self-described mechanic who started out winding bobbins in his father's woollen mill and went on to invent machines that changed their industries. Cyrus Chambers came from Quaker parents the ninth of thirteen siblings, he once said a year before his death. “I believe I have succeeded because, first, I was industrious; second, because I made a study of the subject that was before me.” At age 7, Chambers went to work in his father’s mill. His job was to monitor bobbins—wooden spindles around which thread was wound and to remove and replace them as they became full. "There was no child labour law at that time," he later recalled. Chambers loved machinery and always regarded himself as a mechanic rather than an inventor. At age 16, Chambers was sent to learn dentistry with an older brother, (Edwin) who was already in the field and willing to take him on as an apprentice. Chambers was talented at working with small parts. He used his brother's dental instruments to build a miniature high-pressure steam engine of silver. It ran at 3,000 revolutions per minute and weighed less than a half-ounce. At that time it was the smallest engine that had ever been constructed. The engine was displayed at the 1876 Centennial and is now in a permanent collection at the Franklin Institute USA. Chambers major invention was the paper folding machine and came from reading that school teachers made less than the young girls who were employed to fold book pages as they came off the press. He told friends that his first efforts were to make the machine that would fold newspapers after demonstrating his device he met with Horace Greeley of the New York Tribune who advised Chambers would never invent the machine that would be able to fold his newspaper or books. In less than a year Chambers had built a full-size machine capable of folding large newspapers and books and was installed at J B Lippincott & Co folding pages for the "Comly Speller" this machine ran successfully for twenty-five years until the printing works burnt down. Chambers then went into partnership with a brother and they established the firm "Chambers, Brother & Co" at a plant in Philadelphia. It was also observed in 1910 and a fact that there was not a periodical or newspaper printed or recently published book that had not gone through one of Chambers inventions. Chambers went on to produce many mechanical inventions and improvements to existing tools and machinery most notable was his invention for the machine that would make clay bricks. This machine made forty bricks per hour and by the end of Chambers life after many improvements, it could make more than four hundred. Although there were a large number of bold cutters made of this patent at Cyrus Chamber’s foundry in Philadelphia, the item is associated with a notable American inventor of the nineteenth century. This particular patent for a bolt and rivet cutter won Chambers the prestigious Elliott Cresson Medal. This cutter is just one of the many inventions and mechanical improvements that Cyrus Chambers made during his lifetime, contributing to the ongoing development of mechanical improvements that were occurring in American industry of the time and therefore a notable addition to the Flagstaff collection.Cast iron bolt cutter with removable tempered steel cutter. Chambers New No. 2.Raised embossed lettering on cast body of cutter "New No 2" on one side, "Chambers Bros & Co" on the other sideflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, cyrus chambers, bolt cutter, paper folding machine, brick making machine, elliot cresson, elliot cresson medal, franklin institute, gold medal, rivet cutter

Disston Saw Works of Philadelphia was one of the better known and highly regarded manufacturers of handsaws in the United States. During the Machine Age, the company was known as Henry Disston & Sons, Inc. a supplier of industrial saw blades. History: The story of handsaws in the United States mirrors the technical and development of steel in Sheffield, England, which was the center of handsaw production during the 18th century and through most of the 19th century. England's political and economic lock-on steel making in the colonies held American saw makers at bay until well after the Revolutionary War. American steel producers were unable to compete until the US government introduced import tariffs to level the playing field in 1861. Henry Disston: Henry Disston (1819–1878) began his career as an American saw maker in Philadelphia. He had emigrated from England in 1833 and started making saws and squares in 1840. In 1850, he founded the company that would become the largest saw maker in the world, the Keystone Saw Works. Some five years later, Disston built a furnace—perhaps the first melting plant for steel in America and began producing the first crucible saw steel ever made in the United States. While his competitors were buying good steel from Britain, he was making his own, to his specification, for his own needs. Disston subsequently constructed a special rolling mill exclusively for saw blades. Over the following decade, the Disston company continued to grow, even while dedicating itself to the Union Army's war effort. In 1865, when his son Hamilton Disston rejoined the business after serving in the Civil War, Disston changed the company's name to Henry Disston & Son. Henry Disston and his sons began to set the standards for American saw makers, both in terms of producing high-quality saws and files in 1865 through his development of innovative manufacturing techniques. In September 1872, Henry Disston and two other men dug a part of the foundation for what was to become the largest saw manufacturing facility in the world: Disston Saw Works. This was in the Tacony section of Philadelphia. Having previously moved his expanding business from near Second and Market Streets to Front and Laurel Streets. It took over 25 years to move the entire facility to Tacony. Henry Disston was renowned for having one of the first industries that exhibited environmental responsibility, as well as a paternalistic view towards his employees. For example, he had thousands of homes built in Tacony for his workmen. Funds to purchase these homes were made available through a building and loan association set up by the Disston firm. His caring influence on the community was evident in everyday life. To meet employees' cultural needs, a hall and a library were built with Henry Disston agreeing to pay a fixed sum towards its maintenance. The Tacony Music Hall was erected in 1885, also with the assistance of Disston money. Henry Disston had fallen ill by 1877 and never truly recovered; he suffered a stroke and died the next year. This came only one and a half years after seeing his products receive the highest honors at the great Philadelphia Centennial Exposition of 1876. His vision of a working-class community and the completion of the transfer of his enormous saw plant was carried out by his wife and his sons. The company, by the early 20th century, cast the first crucible steel in the nation from an electric furnace in 1906. The firm's armor-plate building near Princeton Avenue and Milnor Street contributed tremendously to the World War II effort. But the company's innovation and industriousness would not last forever. In 1955, with mounting cash-flow problems and waning interest on the family's part to run the firm, Henry Disston and Sons were sold to the H.K. Porter Company of Pittsburgh. Porter's Disston Division was sold in 1978 and became the Henry Disston Division of Sandvik Saw of Sweden. This division was then sold in 1984 to R.A.F. Industries of Philadelphia and became known as Disston Precision Incorporated, a maker of specialized flat steel products. In 2013, R.A.F. Industries sold Disston Precision Inc. in a private sale. Although the company has ceased making Disston handsaws, the Disston brand name still exists in this firm. A tool used to set and sharpen cross cut saws used to fell trees for building construction made by a well known American maker whos firm pioneered the making of saws and their related items including files.combination cross cut saw raker and gauge/jointerDisston USA in the castingflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Colour slide in a mount. Unknown locationMade in USA / Patentedslide, robin boyd

Colour slide in a mount. Unknown house and locationMade in USA / Patentedslide, robin boyd

Colour slide in a mount. Unknown locationMade in USA / 10australia, slide, robin boyd

Colour slide in a mount. Image from a magazine of Quamby Flats, Glover Court, Toorak, Victoria, Australia (1941-1942). (Architect: Roy Grounds.)Made in USA / 5melbourne, slide