HMAS Perth (D29), a modified Leander-class light cruiser. Commissioned into the Royal Navy as HMS Amphion in 1936, she was sold to the RAN three years later. The ship served until 1 March 1942, when she was sunk during the Battle of Sunda Strait. HMAS Perth (D 38), the lead ship of the Perth-class guided missile destroyers. Built as a Charles F. Adams-class destroyer derivative for the RAN and commissioned in 1965, the ship served until decommissioning in 1999. She was sunk as a dive wreck off the coast of Albany, Western Australia, in 2001. HMAS Perth (FFH 157), an Anzac-class frigate commissioned in 2006 and active as of 2012Wooden Plaque 15cm x 13cm with insignia of H.M.A.S. Perth H.M.A.S. Perth

HMAS Stuart (D00), an Admiralty type destroyer leader, launched in 1918 for the Royal Navy. She was transferred to the RAN in 1933, and served during World War II. The ship was paid off in 1946, and sold for scrap. HMAS Stuart (DE 48), one of six River class destroyer escorts (based on the British Type 12 frigate) built for the RAN. She was commissioned in 1963, paid off in 1991, and sold for scrap. HMAS Stuart (FFH 153), an Anzac class frigate commissioned in 2002 and active as of 2012Wooden Plaque 15cm x 13cm with insignia of H.M.A.S. Stuart H.M.A.S. Stuart

HMAS Otama (SS 72/SSG 72) was an Oberon class submarine of the Royal Australian Navy (RAN). Built in Scotland, the submarine was commissioned into the RAN in 1978; the last of the class to enter service. Otama remained in service until late 2000, when she was decommissioned and sold to a Victorian community group, who planned to preserve the submarine as a museum ship.Wooden Plaque 15cm x 13cm with insignia of H.M.A.S. Otama H.M.A.S. Otama

HMAS Arunta (I30), a Tribal-class destroyer commissioned in 1942, which served during World War II. The ship remained in service until 1968, and sank while being towed to China for scrapping. HMAS Arunta (FFH 151), an Anzac-class frigate commissioned in 1998 and in active service as of 2012Wooden Plaque 15cm x 13cm with insignia of H.M.A.S. Arunta H.M.A.S. Arunta

HMAS Warramunga (I44), a Tribal class destroyer commissioned in 1942. The ship fought during the latter half of World War II, and in the Korean War. She was decommissioned in 1959, and sold for scrap. HMAS Warramunga (FFH 152), an Anzac class frigate commissioned in 2001 and in active service as of 2012Wooden Plaque 15cm x 13cm with insignia of H.M.A.S Warramunga H.M.A.S Warramunga

HMAS Orion (S 71) was an Oberon class submarine of the Royal Australian Navy (RAN). One of six submarines ordered by the RAN during the 1960s, Orion, named after the constellation in a break from ship-naming tradition, was built in Scotland and commissioned in 1977. Orion was decommissioned in 1996, marked for disposal in 2003, and broken up for scrap in 2006. Several sections of the submarine remain intact as memorials and museum piecesWooden Plaque 15cm x 13cm with insignia of H.M.A.S. Orian H.M.A.S. Orian

HMAS Warramunga (I44), a Tribal class destroyer commissioned in 1942. The ship fought during the latter half of World War II, and in the Korean War. She was decommissioned in 1959, and sold for scrap. HMAS Warramunga (FFH 152), an Anzac class frigate commissioned in 2001 and in active service as of 2012Wooden Plaque 15cm x 13cm with insignia of H.M.A.S Warramunga H.M.A.S Warramunga

HMAS Derwent (F22/DE 22/DE 49), named for the Derwent River, was a River class destroyer escort of the Royal Australian Navy (RAN). Commissioned in 1964, the ship operated during the Indonesia-Malaysia Confrontation, and was used for filming of the British drama series Warship. The ship was decommissioned in 1994, and was scutted as an artificial reef after use for ship survivability testsInsignia od H.M.A.S. Derwent on wooden shieldH.M.A.S. Derwenth.m.a.s. derwent

HMAS Adelaide (1918) was a Town-class light cruiser commissioned in 1922 and decommissioned in 1946 HMAS Adelaide (FFG 01) was an Adelaide class frigate commissioned in 1980 and decommissioned in 2008 HMAS Adelaide (LHD 01) is a Canberra class landing helicopter dock ship due to enter service in 2015Wooden plaque with insignia of H.M.A.S. AdelaideH.M.A.S. Adelaideh.m.a.s. adelaide

HMAS Hobart (D63), a Leander class light cruiser acquired from the Royal Navy in 1938, and operating until 1962. HMAS Hobart (D 39), a Perth class guided missile destroyer commissioned in 1965 and decommissioned in 2000. HMAS Hobart (DDGH 39), lead ship of the Hobart class air warfare destroyers, scheduled to enter service in March 2016Wooden plaque with insignia of H.M.A.S. Hobarth.m.a.s. hobart

Ark Royal (1587), the flagship of the English fleet during the Spanish Armada campaign of 1588. HMS Ark Royal (1914), merchant ship, converted to an aircraft carrier during World War I HMS Ark Royal (91), British aircraft carrier launched in 1937 that participated in World War II and was sunk by a U-boat in 1941. HMS Ark Royal (R09), an Audacious-class fleet aircraft carrier launched in 1950, decommissioned in 1979 HMS Ark Royal (R07), an Invincible-class aircraft carrier, launched in 1981, decommissioned in 2011Wooden plaque with insignia of H.M.S. Ark Royalh.m.s. ark royal

Type Improved Tribal Class Destroyer Laid down 10 February 1940 Launched 7 February 1942 by Mrs Forde, wife of the Minister for the Arm Builder Cockatoo Docks and Engineering Co Ltd, Sydney Commissioned 23 November 1942 Displacement 1,970 tons Length 377 feet114.91 m 11,490.96 cm 0.115 km 0.0714 mi 4,524 in Beam 36 feet 6 inches Draught 9 feet (mean) Armament Original 6 x 4.7-inch guns 2 x 4-inch guns Anti-aircraft guns As Modernised 1955 4 x 4.7-inch guns 2 x 4-inch guns 8 x 40mm anti-aircraft guns Torpedo Tubes: 4 x 21-inch torpedo tubes A/S Weapon: Squid triple barrelled depth charge mortarWooden Name Plate from H.M.A.S. Warramunga with the name of the ship in Brass Lettering Was mounted on the Superstructure just aft of the second funnel warramunga

HMAS Quickmatch (G92/D21/D292/F04), named for the quick-match, a fast burning match used for lighting cannon, was a Q class destroyer operated by the Royal Australian Navy (RAN). Although commissioned into the RAN in 1942, the ship was initially the property of the Royal Navy. Quickmatch served with both the British Eastern Fleet and British Pacific Fleet during World War II. In the 1950s, the destroyer was converted into an anti-submarine frigate. In 1957, Quickmatch operated in support of Malaya during the Malayan Emergency. The ship remained in service until 1963, and after use as an accommodation ship, was sold for scrap in 1972Plaster insignia crest of H.M.A.S. Quickmatch on wooden plaqueH.M.A.S. Quickmatchhmas quickmatch

Wooden Plaque with the names of the ship and crew written in gold leaf. The ships crest is shown on the top of the boardThe names of the ship and crew written in gold leaf. The ships crest is made from plaster is shown on the top of the board

Registered plaques representing R.A.N. , W.R.A.N.S. , H.M.A.S. Vampire, and H.M.A.S. Perth.Rare collection of Royal Australian Navy plaquesPine-board backing with 4 plaques mounted 1. Royal Australian Navy, 2. W.R.A.N.S.,3.HMAS Vampire, 4.HMAS Perth, The plaques are mounted on a wooden shields. 1. Royal Australian Navy plaque consists of an oval shape topped by a regal crown and bottom an anchor and chain, The center of the plaque is Black in color embossed in a ring of "Royal Australian Navy" the center of the plaque is a symbol of an anchor and chain. 2. W.R.A.N.S. Triangle shape with a Crown made-up from a sailing ship and the bottom a bow of blue ribbon. The lower half of the triangle is a wreath of leaves. the center of the triangle is painted light blue and has small stars one in each corner. In the center there is a ships anchor and chain. The bottom of the plaque is the initials "W.R.N.S." 3.HMAS Vampire A circular plaque a crown on the top a sailing ship in a crown format. Over a name of Vampire in gold on a black back ground the middle is a circle painted blue with a black Bat in the center. The bottom of the plaque is emblazoned with a boomerang, stone axe and aboriginal waddy followed by a banner "Audamus" meaning "we dare, we venture, we risk" 4.HMAS Perth, A circular plaque a crown on the top a sailing ship in a crown format. Over a name of Perth in gold on a black back ground. The middle is a circle painted gold with a black Griffen in the center. The bottom of the plaque is emblazoned with a boomerang, stone axe and aboriginal waddy followed by a banner "Fight and Flourish". motto.plaques, r.a.n., w.r.a.n., h.m.a.s. vampire

Souvenirs of service in RAN Naval Vessels.Souvenirs of service in RAN Naval Vessels.HMAS Napier and HMAS Doomba1. Wooden Life Saving Ring with Temperature Gauge H.M.A.S. Napier 1940 -194. Signed by ship mates on reverse. 2. Wooden Life Saving Ring with Temperature Gauge H.M.A.S. Doomba 1940 -1941 Round Wooden life Saving Rings 1. H.M.A.S. Napier 1940 - 1941 white with Blue color ribbon painted Top, Bottom, Left and right Temperature Gauge in Fahrenheit 20 to 120 Degrees. 2. H.M.A.S.Doomba white with Blue color ribbon painted Top, Bottom, Left and right, Temperature Gauge in Fahrenheit 20 to 120 Degrees.hmas napier souvenir, hmas dooma souvenir

Wooden wall hanging plaque, HMAS BENDIGO emblem, stylized crown, ships emblem with southern cross flag, boomerang, black scroll with inscription."BENDIGO" "ADVANCE WITH PURPOSE" hmas bendigo, navy, memorabilia

Brown wooden frame with glass front. Coloured map of Dardanelles featuring the Sea of Marmara & The Bosporus. Mounted on green background with fawn cardboard backing. Map in scale of miles & kilometers. Map shows landings, ships sunk & events during 1915.Back of frame: “Bethany Gallery 116 Bridge Street Bendigo”map, framed, dardenelles, gallipoli, 1915

Samuel Davies No 64187. Sam signed Attestation papers on 27.4.1918 age 19 years. The page is stamped at the top “passed Light Horse riding test, volunteered to serve in Eygpt”. Listed as joined on 10.6.1918 in 5th General Service Reinforcements, embarked for Eygpt 14.9.1918, disembarked 14.10.1918, allotted to A.A.S.C 30.10.1918, appointed Driver 1.12.1918, embark for Aust 29.8.1919, discharged from the AIF. A.A.S.C. “Australian Army Service Corp” Sam had 3 older brothers already serving overseas, all came home. On 15.10.1940 Sam signed Mobilization Attestation papers in the CMF No V6868 in 6th Auxillary Horse Transport Coy AASC. His service in the CMF finished on 19.8.1942 then transferred to the 2nd AIF 20.8.1942 No VX101248 until discharge on 12.11.1945Coloured certificate with Australian & Union Jack flags at the top with 2 servicemen in front. Golden wattle around border & a docked ship at the bottom. Tan wooden frame with glass front & white cardboard backing with wire hanging strap. Certificate mounted with a green border.Printed on certificate: BOROUGH OF CLUNES FOR LIBERTY ANZACS FOR JUSTICE Presented to Pte S Davies Dated 25.3.19 Signed by Mayor & Town Clerk Bottom R: Red seal aasc, aif, 2nd aif

20. Oct. 2001. Presented to Bendigo & District Ex Navalmen's Club by WO Marty GROGAN RANR - Vice President. HMAS Sydney & Vietnam Logistical Support Veterans Association. Note: Disc for this photo held by T S Bendigo (all printed on backing).Coloured photo of 10 ships with palm trees in foreground. Tan, wooden, frame with glass front & fawn cardboard backing.Printed in black type on white label at top centre: “HMA SHIPS, TOWNSVILLE, WOOLONGONG, LAUNCESTON, WHYALLA CESSNOCK, BENDIGO, GAWLER, GERALDTON, GEELONG & BUNBURY ALONGSIDE DARWIN NAVAL BASE ON COMPLETION OF THE 1999 MINOR WAR VESSELS FLEET CONCENTRATION PERIOD”photographs, hmas, ran

Print of painting attached to black wooden backing. Print is of an ocean battle scene showing 6 ships with an aeroplane & battle flack overhead. Black, grey & orange colours.Printed in ink on back top L:” PAINTING BY FRANK NORTON AUST. W/MEMORIAL, CANBERRA”illustrations-prints, military history - navy/airforce, ran

.1) Made by William TIBBETT No 978 1st AIF while convalescing in hospital in England, also on hospital ship on way to Australia and at out the Army depot in Caulfield 1918. .2) Same inscription as above). Refer 488P for his service history also 573..1) Embroidered Rising Sun badge, mounted & framed. White plain cloth background, King's Crown (multi coloured) & Rising Sun (red/pink) stitched over stitched scroll (glass frame & gold coloured 4 sided frame). .2) Australian Coat of Arms with kangaroo, emu stitched in brown thread, 6 State emblems represented, wattle flowering branches in background on being background cloth, glass in wooden frame.1) “Australian Commonwealth Military Forces”handcrafts- embroidery, military history, rising sun-coat of arms

Painting is mounted with light blue border in a brown wooden frame with glass front, cream paper backing & a wire hanging strap. Water colour painting of a warship at sea. The ship is grey with 4 twin main gun turrets. It also holds an Albatross Aircraft, 2 funnels & 2 wireless masts. The painted sky shows patchy clouds, the sea is a blue green colour with small white waves. HMAS Perth Artist Ray Parkin 1948hmas perth, ww2, ran, paintings

HMAS Doomba & crew. Tan wooden frame, glass front & paper backing. Sepia photo of mine sweeper with signatures of the crew around the edge, mounted on a green background.Ship's crew signatures around photo edge. Bathany stamp on backing.photography, hmas doomba

Rectangular framed black & white photograph of HMAS Westralia. Wooden frame, glass front, white mount.Armed Merchant Cruiser 1940/42 - Landing Ship Infantry 1943/45 Battle Honours Indian Ocean 1940/42 - Pacific 1941/45 - New Guinea 1943/44 - Leyte Gulf 1944 Lindayen Gulf 1945 - Borneo 1945photography framed, hmas westralia, ran ww2

The pins in this collection vary in the timber used and the design. They were found in a warehouse beside Crown Casino in Melbourne, located along the Yarra River, close to the sailing ship "Polly Woodside" and not far from the docks of Port Melbourne. Some of the pins have the mark of a 'Broad Arrow' with 'D ↑ D, which signifies that they were the property of the Australian Government's Department of Defence. Belaying pins are essential equipment on a traditional sailing ship of the 19th and early 20th centuries. They are usually made of wood but some are metal. A belaying pin is used to secure the running ropes of the rigging to the ship's rails using holes drilled onto the rails for that purpose. The belaying pins are inserted into holes in the ship’s rail, drilled for that purpose. When the sail has been raised, the ropes are wrapped around the upper and lower sections of the pins in a figure-eight pattern. The shapes of these belaying pins taper from the rounded end of the handle inwards towards the bottom, which allows them to have a firm fit into the holes in the rails. The rigging rope is wound around the pins in such a way that a tug on the pin's handle pulls it out of the hole and quickly frees the rope and the sail.These belaying pins are significant for their association with sailing vessels, particularly vessels of the late 19th and early 20th centuries. They are also significant for their association with the Port of Melbourne where sailing ships docked to and from the Port of Melbourne. Some of the pins have additional significance for being connected with the Australian Government's Department of Defence.Belaying pin, wooden, simple design, wooden shaft with a wider rounded end on top third, tapering to the centre third, which is wider than a lower third. The bottom has a blunt base. Some of the pins have the three sections divided by a line around their circumferences. This collection of fifty-seven pins of varying shapes, colours and timber. Some of the pins are stained with colour, and some have been left natural Stored in a wooden crate. Some have inscriptions.Marks: (Government Defence Department Broad Arrow) "D ↑ D"sailiing equipment, nautical equipment, rigging, yards, flagstaff hill, maritime museum, maritime village, belaying pin, broad arrow, australian government, australian department of defence, sailing ship, sail

Stoves of this design are used for heating domestic places and were available in many designs and shapes. They commonly used wood as fuel and were not only used for heating but cooking as well. This stove was part of the original furnishings of the 1922 vessel 'Reginald M a South Australian costal trader it was made from material and fittings obtained from salvage yards. The vessel “Reginald M” was a two-masted coastal ketch, owned and built by Mr. Jack (John) Murch of Birkenhead, Port of Adelaide, South Australia. Its construction took approximately 6 months and it was launched at Largs Bay in 1922. Reginald M had a very shallow draft and a flat bottom that enabled it to come close to shore and to sit high and dry at low tide or to be beached on sand. The flat bottom was also to make the ship able to skim over reefs. Wagons could load and unload direct from her side. Her cargo included Guano, Barley, Wool, Horses, Cattle, Timber, Explosives, Potatoes, Shell Grit and Gypsum. On April 9th 1931Reginald M weathered a large storm in St Vincent Gulf, SA. The vessel suffered much damage; mast snapped and the crew labored for four hours to free her by chopping off the past and rigging. The crew patched her up and slowly returned to Port Adelaide with only a portion of the insured cargo being damaged. Her crew members at the time were owner Mr John H Murch of Wells Street Largs Bay, Skipper Mr R Murch John’s brother, Murray – son of Captain Murch and Seaman John Smith. Reg Webb purchased Carribie Station, at Marion in the Warooka District, south of Adelaide, in 1921. He cleared the land and farmed sheep and grain. In 1923 he shipped his own wool and grain from Marion Bay, having first carted 300 bags of the barley grain, 12 bags at a time, along the unmade track to the jetty. A photograph donated to Flagstaff Hill, dating about 1929 - 1942, shows two men on the Reginald M, holding between them their fishing catch of a large hammer shark. The photograph is stamped “GRENFELL STUDIO PORT LINCOLN PRINT” and titled “hammer shark caught on Reginald M”. The donor’s family lived on the Your Peninsular and dispatched their grain from a chute at Gleeson’s Landing to the awaiting transport vessel. Reg knew the Murch Brothers from Port Adelaide. The brothers had been using their ketch REGINALD M to ship Guano from the Islands, led by Captain Richard Murch. Reg approached them in 1934 about shipping grain from Marion Bay. The brothers visited the bay and thought it was an ideal place. They showed Reg where to stack his grain and they measured up the cliffs. When Reg was ready, they brought down and installed a ninety foot wooden chute. The bags of grain were then individually sent down the chute, landing in a waiting small boat then rowed to REGINALD M, 14 bags at a time. After 10 hours REGINALD M would be fully loaded with 1300 bags of grain and shipped to waiting ports. At one time a wild storm destroyed the chute but it was rebuilt and strengthened. REGINALD M was involved in shipping the grain from there until 1938. In 1940 Able Seaman Allan H Lucas served on Reginald M between September and December, being engaged and discharged from Port of Adelaide. His Certificate of Discharge was signed by ship’s Master W S Murch. It seems that at some stage Reginald M was used as a Customs vessel, as one photograph in Flagstaff Hill’s collection shows “H.M.C. No. 3, Pt Adelaide” on the bow. In 1969 the last freight left Marion Bay on the ketch REGINALD M carrying grain, wool and explosives. In late 1970 she was sold to the Mt. Lyell Mining and Railway Company and was used by them as a barge to carry explosives. In 1972 the Navy League of Strahan, Tasmania, purchased her for use by the Strahan Sea Cadet Unit to use at Macquarie Harbour and renamed her T.S. Macquarie. However this plan for use of Reginald M did not come to pass. In 1974 Mr. Andrew Rennie, of East Brighton, Melbourne, bought her for a similar purpose. , paying $5,000 and donating a ‘Cadet of the Year” trophy to the Sea Cadets. He sailed her from Strahan to Melbourne, planning to use her for pleasure sailing. In 1975 Reginald M was sold to Melbourne Ferry Company at auction. Later in 1975 the Reginald M was bought by Flagstaff Maritime Museum for $20,000 . She has been restored and is now one of the exhibits in the Village lagoon or lake. It was restored in 2006 using funds from a $4,000 government grant. Flagstaff Hill Maritime Village’s Collection holds several other artefacts associated with Reginald M. They include photographs of the Reginald M, including one photograph of her in Outer Harbour, S.A. dated 1947, with Skipper- R.F. Dale and Owner- John Murch. Another shows her docked at Port Adelaide, with the lettering H.M.C. No. 3 Pt ADEL (standing for His or Her Majesty’s Customs). The stove is significant as it represents the heating and cooking appliances used in late 19th and early 20th century, both on board vessels as well as for domestic purposes. The stove has additional significant for its association with the vessel "REGINALD M" a coastal trading ketch from South Australia built in 1922 at Largs Bay. It is one of very few sailing coastal trading vessels built in Australia with its flat bottom, single chine shape designed for navigating shallow water. See additional comments in the Production section this documents under Comments for further information regards the stove. Stove a cast-iron, rectangular, four-legged stove with a hinged front door. This stove was part of the original furnishings of the vessel 'Reginald M', built in Adelaide 1922. Image of a log cabin with an illegible inscription below it.flagstaff hil, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, coastal trader, trading vessel, vessel reginald m, ketch, john murch ship builder, reg webb, carribie station, mt lyell copper company, queenstown navy league, andrew rennie, melbourne ferry company, r.f. dale, port adelaide vessel reginald m, macquarie training vessel, grenfell studio port lincoln, stove, domestic heating, domestic cooking, heater, cooking unit, wood fired stove, wood stove, wood-burning stove

The ship's steering gear was used for steering and navigation of a vessel - it was a very important part of the ship's equipment. This steering gear was part of the original vessel 'Reginald M', which became part of the exhibitions at Flagstaff Hill Maritime Village. The steering gear was manufactured by the Carron Company. ABOUT THE CARRON COMPANY The Carron Company established its ironworks on the banks of the River Carron in Stirlingshire, Scotland, in 1759, and became an incorporated company in 1773. One of the notable items produced by the company was the Carronade, a short-barrelled naval cannon, being produced until the 1850s. The company was the largest ironworks in Europe during the 19th century. It supplied ammunition and armaments, steamboat engines, pig iron, cast iron goods such as balustrades fire grates and bath tugs, pillar boxes and telephone boxes, and even cast iron rings for underground tunnels. In 1982 it became insolvent and was taken over by the Franke Corporation, using the brand Carron Phoenix. ABOUT THE 'REGINALD M' The Reginald M’s purpose was to serve the coastal trade of South Australia, to carry cargo cheaply and efficiently. It is believed that the keel was in fact hewn from two telegraph poles! Its builder frequented all the salvage yards for materials and fittings. The vessel “Reginald M” was a two-masted coastal ketch, owned and built by Mr. Jack (John) Murch of Birkenhead, Port of Adelaide, South Australia. Its construction took approximately 6 months and it was launched at Largs Bay in 1922. Reginald M had a very shallow draft and a flat bottom that enabled it to come close to shore and to sit high and dry at low tide or to be beached on sand. The flat bottom was also to make the ship able to skim over reefs. Wagons could load and unload direct from her side. Her cargo included Guano, Barley, Wool, Horses, Cattle, Timber, Explosives, Potatoes, Shell Grit and Gypsum. On April 9th 1931Reginald M weathered a large storm in St Vincent Gulf, SA. The vessel suffered much damage; mast snapped and the crew laboured for four hours to free her by chopping off the past and rigging. The crew patched her up and slowly returned to Port Adelaide with only a portion of the insured cargo being damaged. Her crew members at the time were owner Mr John H Murch of Wells Street Largs Bay, Skipper Mr R Murch – John’s brother, Murray – son of Captain Murch and Seaman John Smith. Reg Webb purchased Carribie Station, at Marion in the Warooka District, south of Adelaide, in 1921. He cleared the land and farmed sheep and grain. In 1923 he shipped his own wool and grain from Marion Bay, having first carted 300 bags of the barley grain, 12 bags at a time, along the unmade track to the jetty. A photograph donated to Flagstaff Hill, dating about 1929 - 1942, shows two men on the Reginald M, holding between them their fishing catch of a large hammer shark. The photograph is stamped “GRENFELL STUDIO PORT LINCOLN PRINT” and titled “hammer shark caught on Reginald Emm”. The donor’s family lived on the Your Peninsular and despatched their grain from a chute at Gleeson’s Landing to the awaiting transport vessel. Reg knew the Murch Brothers from Port Adelaide. The brothers had been using their ketch REGINALD M to ship Guano from the Islands, led by Captain Richard Murch. Reg approached them in 1934 about shipping grain from Marion Bay. The brothers visited the bay and thought it was an ideal place. They showed Reg where to stack his grain and they measured up the cliffs. When Reg was ready, they brought down and installed a ninety foot wooden chute. The bags of grain were then individually sent down the chute, landing in a waiting small boat then rowed to REGINALD M, 14 bags at a time. After 10 hours REGINALD M would be fully loaded with 1300 bags of grain and shipped to waiting ports. At one time a wild storm destroyed the chute but it was rebuilt and strengthened. REGINALD M was involved in shipping the grain from there until 1938. In 1940 Able Seaman Allan H Lucas served on Reginald M between September and December, being engaged and discharged from Port of Adelaide. His Certificate of Discharge was signed by ship’s Master W S Murch. It seems that at some stage Reginald M was used as a Customs vessel, as one photograph in Flagstaff Hill’s collection shows “H.M.C. No. 3, Pt Adelaide” on the bow. In 1969 the last freight left Marion Bay on the ketch REGINALD M carrying grain, wool and explosives. In late 1970 she was sold to the Mt. Lyell Mining and Railway Company and was used by them as a barge to carry explosives. In 1972 the Navy League of Strahan, Tasmania, purchased her for use by the Strahan Sea Cadet Unit to use at Macquarie Harbour and renamed her T.S. Macquarie. However this plan for use of Reginald M did not come to pass. In 1974 Mr. Andrew Rennie, of East Brighton, Melbourne, bought her for a similar purpose. , paying $5,000 and donating a ‘Cadet of the Year” trophy to the Sea Cadets. He sailed her from Strahan to Melbourne, planning to use her for pleasure sailing. Also in 1975 Reginald M was sold to Melbourne Ferry Company at auction. Later in 1975 the Reginald M was bought by Flagstaff Maritime Museum for $20,000 . She has been restored and is now one of the exhibits in the Village lagoon or lake. It was restored in 2006 using funds from a $4,000 government grant. Flagstaff Hill Maritime Village’s Collection holds several other artefacts associated with Reginald M. They include photographs of the Reginald M, including one photograph of her in Outer Harbour, S.A. dated 1947, with Skipper- R.F. Dale and Owner- John Murch. Another shows her docked at Port Adelaide, with the lettering H.M.C. No. 3 Pt ADEL (standing for His/Her Majesty’s Customs). There is a black and white photo of her at a wharf and another showing a person on board.The steering gear is significant through its association with the Carron Company, the largest ironworks in Europe in the 19th century, and the manufacture of the short barrel, lightweight naval gun - the Carronade. The steering gear is significant for its association with the vessel REGINALD M is a coastal trading ketch from South Australia built in 1922. It is one of very few sailing coastal trading vessels still extant, and its flat bottom, single chine shape illustrates a very simple but robust method of construction, compared to other round bilged examples of trading vessels. She is now listed on the Australian Register of Historic Vessels (ARHV Number: HV000562.) Ship's steering gear that was part of the original vessel 'Reginald M', which was constructed in 1922. Inscription on both sides. Made by the Carron Company, UK."CARRON COMPANY"flagstaff hil, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, coastal trader, trading vessel, vessel reginald m, ketch, john murch ship builder, reg webb, carribie station, mt lyell copper company, queenstown navy league, andrew rennie, melbourne ferry company, r.f. dale, port adelaide vessel reginald m, macquarie training vessel, grenfell studio port lincoln, ship steering gear, metal steering gear, ship's gear, ship's navigation, carron company

This 10” (ten inch) spirit level was made from boxwood by Barringtons of London. It was used in the making of ship model Sovereign of the Seas. It is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Jim’s family has donated the ship model “Sovereign of the Seas” and many tools, accessories and documents used in the making of this and other ship models have been donated to Flagstaff Hill Maritime Village. Ship model of HMS Sovereign of the Seas, scale model of 17th Century English war ship, was handmade and carved from plans, enclosed in airtight glass case. All components of that model, including even the smallest pulleys, were hand crafted using tools designed and made by Jim. Outstanding details include functional rigging and moving cannons. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the maker. This spirit level is connected with the hobby and skill of ship model making that has been crafted as a leisure activity for many generations. The hobby is often chosen by serving and retired mariners who appreciate the connection with maritime history. This spirit level was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage. Wooden spirit level. Barringtons Spirit level No 650, Warranted boxwood. Made in London. Length 10" (10 inches). Bottom corners are reinforced with metal protection. It has two levels. The vertical level is within a round cut-out in one end. The horizontal level is on the top edge, surrounded by a metal plate with two cut-outs. One side of the spirit level has a ruler marked at 1/16 inch intervals, the other side is marked at 1/8 inch intervals. There is a large circle cut-out in the end that holds the vertical level. Both sides have the manufacturer’s name, the level’s model number and the material it is made of. One side also has the city of manufacture – England. This spirit level is part of a collection of tools and accessories once used by Jim Williams, maker of a series of ship models 1930-1955 including “HMS Sovereign of the Seas”. 2x “WARRANTED BOXWOOD”, 2x “BARRINGTON’S No 650”, “LONDON”flagstaff hill, warrnambool, flagstaff hill maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, jim williams, james bernard williams, ship model hobby, ship model tools, ship model making equipment, ship model making accessories, barringtons spirit level, barringtons london, 10” spirit level, sovereign of the sea, ship model, hobby, ship model tool, english war ship, measuring instrument

This double headed hammer seems to be modified for a particular use, with the addition of a one-pronged claw on one end. It was used in the making of ship model Sovereign of the Seas. It is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Jim’s family has donated the ship model “Sovereign of the Seas” and many tools, accessories and documents used in the making of this and other ship models have been donated to Flagstaff Hill Maritime Village. Ship model of HMS Sovereign of the Seas, scale model of 17th Century English war ship, was handmade and carved from plans, enclosed in airtight glass case. All components of that model, including even the smallest pulleys, were hand crafted using tools designed and made by Jim. Outstanding details include functional rigging and moving cannons. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the maker. This hammer is connected with the hobby and skill of ship model making that has been crafted as a leisure activity for many generations. The hobby is often chosen by serving and retired mariners who appreciate the connection with maritime history. This hammer was modified and was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage. Hammer, small, double ended; metal hammer one end, wooden bulbous handle, metal claw hook at the end. This hook is part of a claw hammer with one prong broken off, perhaps to serve a particular purpose. The claw end has remnants of red paint. This hammer is part of a collection of tools and accessories once used by Jim Williams, maker of a series of ship models 1930-1955 including “HMS Sovereign of the Seas”. flagstaff hill, warrnambool, flagstaff hill maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, ship model sovereign of the seas, jim williams, james bernard williams, ship model hobby, ship model tools, ship model making equipment, ship model making accessories, double ended hammer, modified hammer, sovereign of the sea, ship model, hobby, ship model tool, english war ship