A wooden, slotted handle racquet with a 12 1/2 inch head. Inscription along neck of obverse: FLASH. Inscription across neck of reverse: HARRY C. LEE & CO/NEW YORK. Inscriptions featuring manufacturing and patent details situated along the sides of the stem. Materials: Wood, Glue, Lacquer, Ink, String, Gut, Leather, Metaltennis

A Dayton Pilot tennis racquet, with a steel head and throat, and, wooden shaft and deep-grooved handle. Racquet strings made from piano wire. Racquet head stringing continues through into the fully opened throat. Decals of maker and model, with patents, feature on right side of shaft. Materials: Wood, Metal, Glue, Lacquer, Paint, Leather, Ink, Cordtennis

A Davis Olympyad tennis racquet, with whipping around the shoulders, and a leather handle grip with patterned perforations. Model name features across base of head, on obverse. TAD trademark, within diamond device, features on throat on reverse. Patent details feature on left side of shaft. Materials: Wood, Nylon, Ink, Leather, Glue, Lacquer, Metal, Stringtennis

Sepia coloured heavy paper, plans drawn in black pen. Written on top of plan: Youngman Harrison's Patent, 22 March 1875' Plans contain drawings labelled as copper pages, roller, grating, drag. Plan has been tightly rolled. On outer edge, written in black pen Harrison Quartz Tailings Pulveriser (last word unclear)equipment, quartz tailing pulverisor, gold mining, lansell

Continuous cutting chain was patented in 1905 by Samuel Bens of San Francisco, while the first portable chainsaw was developed and patented in 1918 by Canadian millwright James Shand. But the main advancements of modern petrol chainsaws occurred in Europe in the 1920s and 30s where Andreas Stihl is often hailed as the "father of the chainsaw" After the second world war lighter materials, metal alloys and improved engine designs revolutionised the logging and timber industry. Of interest on this model is the spacing of the teeth compared to modern machines. With a 4HP motor it has few safety features and is very heavyEarly model chainsawBurns ChainsawModel 106forest harvesting

The Edison Fireside Phonograph Combination Type A model phonograph was an open horn model. This machine was produced around 1909, just after the introduction of 4-minute record cylinders in 1908.; the selection lever on the front was either 4 or 2-minute choice. This Fireside model has a fluted octagonal horn that attaches to the reproducer on the machine and is suspended by on ring by a horn crane attachment. The phonograph machine is powered purely by mechanical means, winding the crank handle on the side of the machine to start the belt-driven, spring-loaded motor inside. The sound comes from a pre-recorded, vertical cut record cylinder, which slides over the Mandle, a smooth rotating drum. The reproducer, an all-in-one needle, amplifier and speaker, is lowered onto the cylinder, the needle picks up the sound and plays it on the speaker and the attached horn amplifies the sound. The phonograph machine was invented by Thomas Alva Edison in the late 19th century. Edison adopted the idea from the technology of the telegraph machine. He patented the phonograph in early 1878. It was able to record sound and play it back. This amazing invention opened up a whole new world of entertainment, where wax cylinders of pre-recorded sound could be purchased with a wide variety of music and played over and over. The first wax cylinders were white and used a combination of bees' wax and animal fax or tallow. By 1892 Edison was using 'brown wax' cylinders that ranged from cream through to dark brown. The Edison Phonograph Company was formed in 1887 to produce these machines. He sold the company in 1855 to the North American Phonograph Company but bought that company in 1890. He then started the Edison Spring Motor factory in 1895, and the National Phonograph Company in 1896. In 1910 the company became Thomas A. Edison Inc. In 1898 Edison produced the Edison Standard Phonograph, the first phonograph to carry his own trade mark. He began mass producing duplicate copies of his wax cylinders in 1901 using moulds instead of engraving the cylinders. The wax was black and harder than the brown wax. The ends of the cylinders were bevelled so that the title's label could be added. The last phonograph machine to use an external open horn was produced in 1912 due to the much more robust round records being invented. In 1913 Edison started producing the Edison Disc Phonograph. The company stopped trading in 1929.This Edison Fireside Phonograph model is significant for being one of the last models to have an external horn. It is also significant for its connection with the invention of the phonograph, which made music and sound available for domestic enjoyment. It was used for entertainment and education, even teaching languages. It signalled a new era of music that could be reproduced and played anywhere. It is also significant for its short time span of popularity, just a few decades, due to the growing use of records, which gave a much higher quality sound and were more robust.Phonograph; Edison Fireside Phonograph, Combination Type, Model A. It is in a wooden case with a domed lid, metal catches on each side and a folding wooden handle. It has a metal drum and a reproducer mechanism. The metal and wood crank handle starts the machine’s motor. A sliding lever at the front selects the speed for four- or two-minute cylinders. The inscribed plate has the maker, serial number, patents and other information. The reproducer also has an inscription. It has a curved metal open horn attachment. Made in Orange, New Jersey in c.1909. NOTE: the fluted octagonal horn is catalogued separately.Case front, in script, Edison’s early ‘banner’ decal “Edison” On the front of the machine “Thomas A Edison TRADE MARK” On the maker’s plate; "Edison Fireside Phonograph Combination Type" Serial number “14718” Around sound outlet; “C 4076” “REPRODUCER LICENCED FOR USE ONLY ON EDISON PHOTOGRAPHS SOLD BYT.A. EDISON INC.” At the front edge “4 MINUTES 2flagstaff hill, maritime museum, maritime village, warrnambool, great ocean road, shipwreck coast, gramophone, phonograph, music player, entertainment, audio equipment, edison, thomas a edison, horn, phonograph horn, amplifier, audio, sound recording, sound playback, phonograph machine, phonograph cylinder, external horn, edison phonograph company, wax cylinders, sound reproduction, edison spring motor factory, national phonograph company, thomas a. edison inc, crank-operated motor, open horn phonograph, 4 speed, 2 speed

Early Hamilton Patent lemonade bottle, green tinted glass. The 'torpedo' shape was designed so the bottle could not be stored upright. As long as the cork was kept wet, the contents would maintain its carbonation.Green tinted glass bottle, "torpedo" shape, applied topglass bottle, torpedo bottle

Used on Ballarat-Skipton railway line to carry money and tokens. Rescued from bonfire when Linton Station was demolished, by Fred Freestone. Donated to Society 1981.Two brown leather pouches. Bag 1 has brass plate which reads "Linton" (plate attached to square of leather stitched to bag). Bag 2 has the word "Linton" written in ink on front, where leather patch and brass plate used to be. Each bag has two brass loops at top, holding a leather strap which keeps the pouch closed. A brass padlock with a key is attached to the strap.Makers' marks: On padlock 1 and its key: "M 63" "J. Hubball Melbourne". On padlock 1: "VR". On padlock 2: " + " "S166" "59" "Chubb's Patent" "120 Queen Victoria St London" "Makers to Her Majesty" "120294" (=date?). On key for padlock 2: "Chubbs Patent" "London" "VR".railways, transport, conductor's bags

Beecham’s Pills became one of the most popular ‘over the counter’ patent medicines after their introduction in the 1840s. Developed by Thomas Beecham, Beecham’s Pills were a standard family medicine for many generations. (Ref sciencemuseum.org)This item reflects changes in public health medical practice and research over the last century. Beecham pills were a commonly purchased home remedy.Small, round wooden container for Beecham's Pills. Still has original label and two pills inside.medicine beecham pharmacy

Bendigo Central Bottle Club Newsletter - James Lerk Collection, Vol 7. No. 6 (ca. June/July1982) Sketches of bottles - Jones Miller & Co. Cordial manufacturer , Bendigo, W Bruce & Sons - Patent Aerated Waters, Sandhurst; reprint article from ''Bendigo and Vicinity'' (1895) re W Bruce & Sons, Brewers, Bendigo with biographical details and description of brewery.

A Goldsmith 'Hermis' tennis racquet with elongated oval head and concave wedge throat. Decal of manufacturer on throat on obverse states: THE SPORTING GOODS WITH A GUARANTEE/TRADE/MARK/REG U.S. PATENT/GOLDSMITHS/HERMIS. Handle hand carved/customised. Has butt cloth and string whipping around shoulders Materials: Wood, Lacquer, Metal, Glue, String, Ink, Guttennis

A wooden, slotted handle racquet, with a 13 1/2 inch head. Inscription along throat of obverse: CADILLAC. Inscription across base of head of reverse: HARRY C. LEE & CO/NEW YORK. Inscriptions featuring manufacturing and patent details situated along the sides of the stem. Materials: Wood, Glue, Lacquer, Ink, String, Gut, Leather, Metal, Clothtennis

A Dayton Pilot tennis racquet, with a steel head and throat, and, wooden shaft and deep-grooved handle. Racquet strings made from piano wire. Racquet head stringing continues through into the fully opened throat. Decals of maker and model, with patents, feature on front, and right side of shaft. Materials: Wood, Metal, Glue, Lacquer, Paint, Leather, Ink, Cordtennis

Associated with Leading Aircraftman Gordon William Garbutt, Service no: A112675, who served as a Motor Transport Fitter (Grade 1) at Base Squadron Ubon 1967-68, and No.1 Operational Support Unit in Vietnam 1969-70.Royal Australian Air Force blue peaked cap ( size 58) with black woven hat band and black patent leather chin strap secured by RAAF buttons. The sweatband is brown vinyl and the inside of the cap is lined with dark blue polyester and plastic. Warrant Officer badge on front has gold eagle above gold feathers, topped by a black and red crown.garbutt, g w garbutt, raaf, uniform, warrant officer, cap, hat

This type of mobile spring weighing scales were in high use before legislative Weights and Measure standards where in force throughout Australia. This was in a time when a "mans word and handshake" was his legal document. It was a time, especially in rural areas that the term "she'll be right" was extensively used and these types of scales (the accuracy over time) would produce a near "enough is good enough" measure. These scales are very significant for the rural produce within the Kiewa Valley. Rural produce such as hay milk and butter tubs,tobacco bundles could be easily weighed (in relatively smaller packages) for both markets and for use within the valley.This spring scale (!/2 Once to 4lb) was used as general weight scale. Because it is spring loaded the accuracy would fade over time and by over weighted loads. The spring enclosure is made from cast iron painter black. There is an iron ring at the top (attaching/holding) and an iron hook at the bottom (holding). There is a brass front plate with engraved markings(on the left side) running from top to bottom and a movable pin weight indicator running in the middle indicating the weight of the item being weighed.At the front top"SALTER'S SPRING BALANCE 4LB BY 21/2 OZ" underneath "No 1A" At the bottom in smaller print "MADE IN ENGLAND PATENT"weighing instruments, spring balances

1946 One of the first Contex calculators, the Half-Keyboard Adder used Leibniz step cylinders to perform simple addition. The predominant use of this Contex would have been adding sterling currency. Starting from the right, the levers were used for half and quarter pence, the next row would be pence, followed by shilling up to 19, and pounds. On the far left there is a zeroing lever for the entire mechanism; Ref: Online: 'physicsmuseum.uq.edu.au'Used by the office staff at the SECV construction of the Kiewa Hydro Electric Scheme.Bakelite small typing machine consisting of numbers with a screen above.'Context' embossed centre front 'Lubrication' with instructions and with Patents on bottom 'Chartres Business Service' at back 'Numbers 1 - 5' at front on knobscontex, adding machine, office equipment

The Victoria Tower made landfall after a voyage of 85 days from Liverpool, and headed towards the Port Phillip Heads pilot boarding ground. It had been an uneventful voyage despite some contrary headwinds (causing the long voyage) and problems with the compasses, that could not be relied upon. The weather was hazy, with gale force winds and heavy rain squalls. Reaching the pilot ground Captain Kerr fired rockets and burned blue lights to attract attention, but met with no response. Sighting the Cape Shank lighthouse he sailed towards it, then wore the Victoria Tower onto a port tack in a westerly direction. No soundings nor observations were taken, as Captain Kerr was confident he was on a safe course and knew his position tolerably well. Slatted wooden cabin door with 2 locksPatent disk on top lock, W2 SR on either side of coat of arms. Number 60 in the middle and 1A carpenter patentee underneathdoor, cabin, victoria tower, shipwrecks

Oil burning Tail-lamp for a (1917/23) model Ford T Model Motor Car in unused condition. Mounted on a varnished wooden block mount.Faintly engraved on top "Ford" Faintly engraved on bottom "PAT MAY 26 -14 PAT JUN 23 - 14 PAT NOV 23 - 15 PAT DEC 21 - 15 PAT NOV 7 - 16 PAT AUG 28 - 17" On front of Timber Mounting "Donated by Jim Dowton Sale FORD - Model T 1917 - 1923 Tailamp - part 6568x" On back of timber mounting "ON LOAN J.DOWTON SALE TAIL-LIGHT 1912 - 1919 T MODEL FORD"1920, 1918, 1919, 1917, 1923, ford, tail light, tail lamp, henry ford, t model, ford car, kerosene lamp, 1921, 1922, 6568x, part number 6568x, dowton

Cardboard periscope - folded with two mirrors. Directions for use are included on top and bottom.Top: "Directions for use . . ." Bottom: "Directions for use . . ." "VIMOS PERISCOPE" PAT APP FOR NO 25973 / 1936periscope - collapsible

Back panel has been stuck to case. Original case would have had feet due to length of pendulum. Dial now fitted does not relate to this clock. Original dial is on back of new dial.Mantel clock in ash veneer on a spruce case. Eight metal decorative clasps around case. Roman numerals on clock face. Four round wooden legs. Clock has a suspension pendulum.horology, clocks

An eggbeater is a hand-held device with a crank on the side geared to one or more beaters. The user grips the handle with one hand and operates the crank with the other, creating the rotary action. A hand-turned rotary egg beater was patented by J.F. and E.P. Monroe in 1859 in the US. This egg beater patent was one of the earliest bought up by the Dover Stamping Company, whose Dover egg beaters became a classic American brand. The Monroe design was also manufactured in England. In 1870, Turner Williams of Providence, R.I., invented another Dover egg beater model. The Hobart Manufacturing Company was an early manufacturer of large commercial mixers. A mechanical egg beater with a wooden handle and steel gears and crank c1940cooking, kitchen equipment, dairy, cakes, housework, early settlers, pioneers, baking, nutrition, blacksmiths, market gardeners, cake mixers, moorabbin, cheltenham, bentleigh, brighton, monroe e.p., monroe j.f., egg beaters, williams turner, dover stamping compant ltd., hobart manufacturing company ltd.

The development of stereoscopic photography views or stereographs was immensely popular in the United States and Europe from about the mid-1850s through the early years of the 20th century. First described in 1832 by English physicist Sir Charles Wheatstone, stereoscopy was improved by Sir David Brewster in 1849. The production of the stereograph entailed making two images of the same subject, usually with a camera with two lenses placed 6 cm apart to simulate the position of the human eyes, and then mounting the positive prints side by side laterally on a stiff backing. Brewster devised a stereoscope through which the finished stereograph could be viewed; the stereoscope had two eyepieces through which the laterally mounted images, placed in a holder in front of the lenses, were viewed. The two images were brought together by the effort of the human brain to create an illusion of three-dimensionality. Stereographs were made of a wide range of subjects, the most popular being views of landscapes and monuments and composing narrative scenes of a humorous or slightly suggestive nature. Stereoscopes were manufactured for various price ranges and tastes, from the simple hand-held device introduced by Oliver Wendell Holmes who promoted stereography through articles to elaborate floor models containing large numbers of images that could be flipped into place. The stereograph became especially popular after Queen Victoria expressed interest in it when it was exhibited at the 1851 Crystal Palace Exposition. Like television today, stereography during the second half of the 19th century was both an educational and a recreational device with a considerable impact on public knowledge and taste. The Fine-art Photographers' Publishing Co. published many stereoscopic pictures from many different photographers from around the world under license. They also not only sold these images of various scenes and of famous people of the time but also were retail sellers of the viewers with the subject item having been made in the USA probably by H C White who held the patent for the subject items design from 1895 to 1902.An item that was very popular from the mid 19th century through to the beginning of the Edwardian period. Used for entertainment and also educational purposes and significant as it gives us a snapshot into the Victorian era and its social and domestic societal norms. Stereoscope viewer with adjustable view-finder that has a padded nose rest. The slide holder can move along the channel to suit the viewer. Made in London by the Fine-art Photographers' Publishing Co. Printed on metal plate "THE FINE-ART PHOTOGRAPHERS' PUBLISHING CO. 48 Rydevale Rd, LONDON, S.W." Embossed on viewing cup "U.S.A. PATENT OCT.15.1895" "CANADA / FRANCE / GERMANY / D'R''G'M' NO. 53803" "JUNE 3.1902 / FEBY 1.1896 / B.S.G.D.B. / GREAT BRITAIN / AUSTRIA / BELGIUM"warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, flagstaff-hill-maritime-village, stereoscope, stereographs, stereoscope viewers, home entertainment

This tape measure was probably produced for, and used by, tradesmen such as carpenters and builders. In 1821 James Chesterman patented a tape measure that used a spring for rewinding the tape and the makers of large tape measures have used this method for nearly 200 years now. This item has no known local provenance but is retained as an interesting example of a common household and industrial item from the past but one which in an updated version is still in use today.This is a metal tape measure (in inches) enclosed in a circular-shaped leather covering. In the centre of the leather cover is a metal mechanism for rewinding the tape. The tape has a metal ring at its end. The leather is very rubbed and the tape is rusty. There is printing embossed on both sides of the leather cover. ‘Chesterman Ltd Sheffield England’ ‘66 ft’household items warrnambool

Albert Martin and Company were manufacturers in London and they held the patent for these clippers. They were advertised for sale in Bendigo in 1898 for 4 shillings a pair and in 1914 they were priced at 4/6 (4 shillings and sixpence). They were sold by various ironmongers. Metal clippers, used for clipping horses. Wooden handle. Quite dirty.A. MARTIN & CO MANUFACTURESmetal, wood

Whittingslowe Engineers Ltd of Adelaide was an Australian manufacturer. A patent for the 'Hot-Glow' water bottles was issued to the company in 1945. An advertisement in 1946 (Morning Bulletin, 19/06) describes the bottles as all metal and advertised their price as 11/6 each.These two hot water bottles are fine and rare examples of products produced by a major Australian engineering and manufacturing company.Two brass cylindrical hot water bottles, manufactured by Whittingslowe. The label of the manufacturer and distributor is on the from of each bottle on a red and gold label."HOT-GLOW' WATER BOTTLES / WHITTINGSLOWE MANUFACTURER / ? WOOD PTY LTD MELBOURNE AND SYDNEY / AUSTRALIAN DISTRIBUTORShot water bottles, domestic objects, whittingslowe - manufacturers

Notes from C & H Ltd., dated Sept 16, 1937 titled 'Scale Buoys'. Typed on paper with printed letterhead of W. H. Cunningham and Hill, Limited. Notes are a review of results since W. H. Cunningham and Hill, Limited, Wholesale Plumbing and Heating Specialists were handed a patented article, told what it would do, how to apply it, and started out to prove it.sciences, instruments - general, scalebuoy, bill ashman collection - correspondence, w h cunningham and hill limited, dr blackhurst, the scalebuoy company

A wooden, slotted handle racquet. Inscription across neck of obverse: DREADNOUGHT/DRIVER/... Inscription across neck of reverse: HARRY C. LEE & CO/NEW YORK. Company logo 'LEE' is stamped on leather butt cap. Manufacturing and patent information along the sides of the handle, with size and production numbers punched in. Materials: Wood, Gut, Leather, Metal, Ink, Glue, Lacquer, Stringtennis