Worn by the donor in the 1960s.Brown fur hat - round fez style - brown satin lined.on label - S.R.McClean Pty Ltd Manufacturing Furrier 48 Royal Arcade Melbcostume, female headwear

Red helmet, very worn. Holder on front of the Helmet for fitting light a detachable light. Ridges in top of Helmet. Vents at either side. Adjustable fittings inside. No manufacturing name Australian Standards Sticker inside. Sticker with Name Jim E. helmet, safety equipment

Black helmet with adjustable head fittings inside made of leather and Cotton tape. Thin cord threaded through the top of helmet to hold head the fittings. Very worn. Smooth surface. No manufacturing name. Australian Standards Sticker inside. Name on label Jim E. helmets, safety equipment

About the 1992 Barcelona Olympic Games donator Doug Pleasance wrote- During the 1980s the Australian wool industry was at its most prosperous times with record numbers of sheep producing wool receiving ever increasing values due to the success of the Reserve Price Scheme, and the overall guidance of the Australian Wool Corporation (AWC). As a humble technichian, my role was a low profile newly created position of “Controller, Technical Marketing” where wool was to be marketed on its technical properties, as distinct from the “Product Marketing Group” which exploited trhe traditional high profile approach of marketing wool;s superior fashion attributes. The Woolmark was the tool central to this approach. The 1992 Barcelona Olympic Games saw an evolutionary change in designer selection. A Declaration of Interest Form was communicated to over forty potential designers. The task and especially tight timelines that were involved deterred many aspirants, however, there remained eight designers with the potential we were seeking. These eight designers were paid $3,000 per submission and the winning designer, Wendy Powitt, was paid $15,000. For the first time the judging panel included two athletes, one male swimmer and one female basketballer, their influence was pivotal. The ensemble consisted of three elements- 1. The Official Uniform which was used for travel and all official functions. This included: a tailored blazer and trouser/skirt (all water repellent) by Fletcher Jones, pure wool olive-green faille fabric by Foster Valley, cotton PE formal shirt by Pelaco, pure wool knitwear by Spangaro, printed wool tie by TD Noone, wool nylon socks by Holeproof and footwear by Hush Puppy. 2. Opening Ceremony Uniform a lightweight wool fabric printed with floral designs that had been inspired by the work of Australian artist Margaret Preston. This included: Lightweight W/PE shorts by Fletcher Jones in Foster Valley Fabric, socks by Holeproof and footwear by Hush Puppy. 3. Village Clothing was designed to be highly visible garments to make it easy to ‘spot the Aussie’ and helped to contribute to good team spirit. This included: A pure wool shirt featuring blocks of contrasting colours, and a newly developed stretch 50:50 wool/cotton fabric by Bradmill was made into shorts and jeans by Fletcher Jones.Floral tie with cream, red, green native flower design.On label - Woven & manufactured in Australia by "Tee-Dee" exclusively for the Australian Wool Corporation1992 barcelona olympics, uniform, tie, australian wool corporation

Wooden chair with leather seat. Manufactured by F.J. Crabb Sturt St S. Melbourne European Labor Only ornate, decorative

Widows are conducting a sale of craft items in a shopping arcade. It is possible the items sold were those made for the annual Art and Craft Exhibitions. Widows would hold a stall in Badge Week, often outside Legacy House to sell items. The Legacy signs say "Legacy caring for Australia's biggest family". The trading tables are outside a Boyles Sweets shop and a Franklins No Frills supermarket. Boyles Sweets closed down by July 1993 so it was before then. Names unknown.A record of the type of activities Legacy provided as a social outlet for widows and fundraising for Legacy. Colour photo of a craft stall run by Legacy widows.This paper manufactured by Kodak. (the same as 00678 and 00679 so they could be the same year).widows, fundraising, badge week

This Gestetner Cyclostyle duplicating machine was invented and manufactured by David Gestetner. He claimed in 1922, once he had released several models, that if a Gestetner Durotype stencil was used together with his Cyclostyle machine, then 10,000 copies could be made from the one Durotype stencil, an amazing claim for office technology of that era. David Gestetner (1854-1939), was born in Csoma, Hungary. He has been called the “founder of the worldwide office copying and duplicator industry.). He moved to London and in 1879 filed his first copying patent. In 1881 he patented the Cyclostyle stylus (or pen), which was used in conjunction with his Cyclograph device for copying text and images, He established the Gestetner Cyclograph Company in England at this time (1881) to protect his inventions and to produce his products; stencils, stylos (stylus or pen) and ink rollers. HIs inventions included nail-clipper and the ball-point pen (although the latter is more commonly associated with Laszlo Biro). Gestetner’s patented Cyclograph duplicator was used with his Cyclostyle Stylus or pen to write or draw on special thin wax-coated stencil paper (originally used for kite making paper) in the following way; 1. The Cyclostyle stencil was placed on a lower, framed metal plate of the Cyclograph 2. An upper frame was clipped over the top 3. The Cyclostyle pen, with its tip being a small metal-spiked or toothed wheel, was used to write or draw on the stencil, punched small holes into the paper and removed the wax coating in those places 4. The upper frame and stencil was then removed and a piece of blank paper was placed onto the metal plate in the lower frame and the upper frame with stencil was replaced 5. A roller was given an even distribution of Cyclostyle ink and rolled by hand over the stencil in the frame. This forced the ink through the holes in the stencil to and made a copy of the stencil on the paper 6. The upper frame was raised, the printed paper removed and another blank sheet was put into place. The whole process was repeated until enough copies were made. Gestetner’s invention developed further in 1894, with a stencil that could be placed on a screen on a revolving drum. The drum was manually rotated, the stencil then wrapped around another drum and was fed between cloth-covered rollers on which ink was evenly spread. Each revolution of the drum forced ink through the holes in the stencil and transferred the ink onto paper that had been fed between rollers and pressed against the drum. The process was repeated for each page. The paper was still fed and removed manually in this earlier invention but became more automatic in later models. In 1902 Gestetner duplicator model 6 was put onto the market. This model included the improvement of an automatic paper feed that synchronised with the rotation of the stencil. The Gestetner machine was the first office printing machine. It was easily installed and it made exact copies of the sane document quickly, effectively and inexpensively. This changed the way offices operated, making information easily available to many more users. The machines were commonly used in small businesses, schools, churches, clubs and other organisations for the wide distribution of a wide variety of information in the form of worksheets, newsletters and more. In 1906 the Gestetner Works were opened in Tottenham Hale, North London, and thousands of people were employed there up until the 1970’s. Due to the fast growing success of the Gestetner Duplicator machines many international branches for sales and service centres were established. David Gestetner was succeeded by his son Sigmund, followed by his grandson’s David and Jonathan. Further advancement was made by using a manual typewriter with specifically designed stencils. The end product was a printed, typewritten copy similar to the print from newspapers and booklets. In the next few years there were further developments of this revolutionary invention. The Gestetner Cyclostyle duplicator in our Collection is dated c.1922 - 1929 and it uses Gestetner Durotype stencils The 1922 British Industries Fair’s catalogue contained advertising for the Gestetner Rotary Cyclostyle “The World’s Premier Duplicator”, demonstrated at Stand K 86.” A Notice at the foot of the advertisement’s page boasts "Important - D Gestetner's latest invention, the "Durotype" Stencil, enables you to obtain 10,000 copies from one original if desired. It contains no wax of any description, is indestructible, can be stored indefinitely and printed from as required” In 1929 the look of the Gestetner machines changed; American designer Raymond Loewy was invited by Gestetner to improve the look of his duplicators, resulting in a very streamlined appearance. Eventually, around 1960’s, offices replaced their Gestetner with small photocopying machines and printers. Gestetner took over ownership of other office machine companies over time, including Nashua, Rex Rotary, Hanimex and Savin and eventually all came under the holding company name of NRG (Nashuatech, Rex Rotary and Gestetner). In 1996 Ricoh acquired the Gestetner Company, and it was renamed the NRG Group. REFERENCES Cyclostyle, Stencil Duplicating Machines, antique Copying Machines, Early Office Museum, http://www.officemuseum.com/copy_machines.htm Duplicating machines, Wikipedia Duplicator, Collection online, Canada Science and Technology Museums Corporation http://techno-science.ca/en/collection-research/collection-item.php?id=1989.0229.001 Gestetner duplicators, Totterham-Summerhillroad.com http://tottenham-summerhillroad.com/gestetner_duplicators_tottenham.htm Gestetner Duplicator, V&A Museum http://collections.vam.ac.uk/item/O322014/gestetner-duplicator-duplicator-loewy-raymond-fernand/ Gestetner, Grace’s Guide to British Industrial History, http://www.gracesguide.co.uk/Gestetner Duplicating machines such as this one revolutionalised access to copies of printed material, changing the way that educational bodies, offices, small businesses and community clubs and charities operated.Duplicating machine, Gestetner Cyclostyle Durotype, a stencil-method duplicating machine with two rotating drums plus rollers. Hand operated, tabletop office machine. Front has folding Bakelite handle, oil filling hole, calibrating gauge with scale, and copy counting meter. Right side has printed manufacturer’s plate that slides out as a paper output tray. Left side has metal plate with protrusions and perforations, plus another similar plate that is detached. It also has a metal frame attached [that would have been used to hold a paper input board, adjusted for various sizes of paper]. Cover, metal, with folding wooden handle on top, attaches to base with metal clips. Inscriptions printed on machine, mostly in gold-coloured paint. Round metal manufacturing plate is stamped with Serial Number 95759. Made by D. Gestetner, London, c.1922-1929Maker’s plate “MANUFACTURED / BY / D. GESTETNER LTD, / No. 95759 / CYCLOSTYLE WORKS / TOTTENHAM HALE / LONDON, N” Copy counting meter shows “1 4 6 4 8 [space]“ copies. Calibrating gauge has divisions with numbers “0 1 2“, labelled “← [left arrow] “TO PRINT LOWER” and “→ [right arrow], TO PRINT HIGHER”. “The Gestetner”, “Cyclostyle”, “Gestetner” (Trade Mark), Right side print of manufacturing details includes “The / Gestetner / TRADE MARK” And “THE FOLLOWING TRAFE MARKS / - - - OF INK, STENCILS / - - - AND GUARANTEE OF PERFECT / - - - BOTH - - - AND MACHINE” and “CYCLOSTYLE / DUROTYPE / GESTETNER” and “D. Gestetner” flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, office machine, copying machine, gestetner machine, duplicating machine, duplicator, stencil machine, gestetner cyclograph company, cyclograph, cyclostyle, d. gestetner ltd, gestetner durotype stencils, gestetner cyclostyle, printing machine, office technology, durotype stencils, david gestetner, raymond loewy, roneo, rotary duplicatorten, mimeo, mimeograph machine, roneograph copier

Sarah Ann Shillinglaw was the first child of Phillip Shillinglaw and Sarah Ann (nee Kidd). She was born February 14, 1873 at Bundoora and died June 3, 1878 at Bundoora and was buried in McLeans Cemetery at Preston. In Memory of Sarah Ann Shillinglaw Who died 3rd June 1878 Aged 5 years and 4 months Interred at McLean's Cemetery Also written in brown ink above main inscription in document held by the bird "I'm going to Heaven to see little Janie" Janie was Sarah's younger sister, Phillp and Sarah's second child born January 14, 1875 at Bundoora who died May 4, 1876 Memorial card manufactured in delicate embossed paper lace, printed in black and completed in (faded) brown ink; loosely placed on a black painted wooden mount inside a wooden frame 19 x 15 x 2 cm fitted with glass pane. Inserted loosely behind this lace card is a second half size embossed paper lace which states Sarah was interred at Melbourne Cemetery on 5th June 1878. G.W. Apps, Undertaker, 165 Fitzroy Street, Fitzroymarg ball collection, memorial card, sarah ann shillinglaw (1873-1878), jane shillinglaw (1875-1876), mcleans cemetery preston

This report is an analysis of regional strengths and challenges. It is research to assess the need for and impact of infrastructure investment in different parts of regional and rural Victoria. This set of documents is a useful research tool.A cardboard box of documents related to Gippsland Regional Profile. It contains reports on social indicators, industries, poulation, areas, assets and resources, agriculture, coal,manufacturing and forestry.gippsland-region industry-gippsland agriculture-gippsland population-gippsland resources-gippsland

Electric Singer knee action Sewing Machine made by The Singer Manufacturing Co Great Britain. Circa 1950's No EF 508285 Book of instructions included.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Document, Emu Sewing Machine Manufacturing Co P/L , Bendigo, Australia.Combining Beauty and Utility, made by Expert Australian Workmen from the Finest Australian Materials.document, names of bendigo pioneers, emu sewing machine co

sepia photograph. Brick wall with large advertising sign,damaged picket fence at front. 'Rosella Preserving and Manufacturing Co. Ltd. ' written on sign on brick wall.A.W.M. Gibbony, Pall Mall, Bendigoorganization, business, rosella factory

Document. Tomato Sauce Advertising Label. ''Pure Tomato Sauce'', Manufactured by the Tasmanian Sauce and Pickle Co''. ''A Marcollo'' Regd. Envelope included addressed to Mr A Hamilton.performing arts, elocution, tomato sauce label.

Provenance unknown, found in a box with five other pelvimeters, marked "PELVIMETERS ( not accessioned)" in the hand of the previous curator, Melissa Campbell pre 2006.Martin's pelvimeter,external, graduated to 50cm and 20 inches. fer to Down Bros. catalogue 938/1, page 938.Manufactureer's statmp "W. & W. on arm.pelvimetry

Development of fourteen story apartment block. Given a permit in 2004. Permit not extended on 2007.Coloured photo of land for proposed development of a fourteen storey apartment block in Colombo Street, Mitcham (previously site of Brewer Sporting Goods Manufacturing Goods Factory)colombo street mitcham, high-rise buildings

A 24-racquet 'Tunmer' press, manufactured in the United States of America, copying the style - and even the inscription - produced by F.H. Ayres, London. Materials: Wood, Metal, Gluetennis

MacRobertson's confectionery was founded by Macpherson Robertson in the 1880s, and later sold to Cadbury's. The tin has local significance as Sir Macpherson Robertson was a resident of Sackville Street, KewOctagonal celadon and pink coloured tin, originally holding confectionary manufactured by MacRobertson. The lid of the tin features an image of roses, while the sides portray other flowers."MacRobertson"confectionery, sir macpherson robertson, containers, macrobertson's confectionery

Australian Defence Industries (ADI) - Thirty-eight assorted coloured brochures covering Defence Technology, Australian Government Munitions Factories and promotional material for manufactured items.adi history

This bottle contains the medicine mixture for diseases of the liver and kidney that was patented by Dr Law of Boston. In the late 19th century Dr Law was a prolific and popular producer of patent medicines. The Warrnambool manufacturing chemist, Richard Kennedy, had the sole rights in Warrnambool to prepare and distribute Dr Law’s medicines. Richard Frank Kennedy (1826-1903) was born in England. He came to Warrnambool in the early 1880s and set up a pharmacy business in Timor Street. He was a retail, wholesale and manufacturing chemist. In 1891 he erected a new building and at that time his shop was described and one of the most elegant and best-stocked chemist’s shops in Victoria. Kennedy was active in Warrnambool community affairs and he was a foundation member of the Warrnambool Bowls Club, being its first Vice-President and an early President. His business continued after his death, trading as R.F.Kennedy and Co. This item is of considerable significance as it is the only example we have of a Dr Law patent medicine produced and distributed by the Warrnambool manufacturing chemist, Richard Kennedy. Both Dr Law and Richard Kennedy used an image of a lighthouse as a business symbol though the images are not identical. This is a glass bottle with a cork containing a chemist’s mixture for diseases of the kidney and liver. The bottle is enclosed in a brown paper cover which is lined with what looks to be the instructions for the use of the medicine. (The bottle is unable to be removed from the covering without major damage to the cover). The covering is brown with images of Dr Law and his lighthouse logo and printed material in brown and white colouring with the name of the product and its benefits. The top of the covering is torn and mended with adhesive tape. ‘Great Blood Purifier’ ‘Dr Law’s Great Cure for Diseases of the Liver and Kidney and all Impurities of the Blood’ Dr Law’s Liver Stimulant and Invaluable Remedy for indigestion, dyspepsia, sick headaches, loss of appetite, spasms, jaundice, constipation, sour stomach, heartburn’ ‘Waterbrasch, Liver, Stomach and Kidneys’ ‘Manufactured at Kennedy’s Pharmaceutical Works, Warrnambool, W.D.’ r.f.kennedy,, warrnambool chemist, dr law of boston, patent medicine producer, chemists in warrnambool, history of warrnambool

The first transistor radio (the Regency TR-1) was produced by Regency Electronics in cooperation with Texas Instruments in 1954. Transistor 4 , the AWA transistor radio was manufactured by Amalgamated Wireless Australasia Limited (AWA), Australia's largest and most prominent twentieth century producer of radios, televisions, audio and telecommunications equipment. Transistor radios went on to become the most popular electronic communication device of the 1960s and 1970s. Billions of transistor radios are estimated to have been sold worldwide between the 1950s and 2012. They were exceptionally popular amongst young people in Australia due to their portability, allowing them to be taken wherever you wanted to gather with friends or, due to the headphone attachment, without disturbing those around you. These pocket radios are representative of technological developments which had a vast influence on social life and activities throughout Australia.4 pocket transistor radios of various brands. No. 1 orange Sanyo RP 1280 manufactured in 1979/1980. No2. is white bakelite No. 2 K--181 pocket transistor made by the Kmart Corporation c1975 and No. 3 is a Nation Brand AM Portable Receiver made in Hong Kong c1980. No. 4 Is an AWA Radiola B121 Solid State pocket transistor. All of them include a socket to plug in an ear piece.No. 1 on the front "SANYO RP 1280 and tuning dial. On the back: "SANYO MODEL RP 1280/ DC 3 V 2 x "AA" BATTERY/ SANYO ELECTRIC CO. LTD." No. 2 on the front "K-181" and tuning dial. On the back "Code 600-857/ AM POCKET RADIO/DC-3VC (UM-3x2)/ART 181. HONG KONG" No. 3 AM Portable Receiver Nation Brand on front No 4. on the front: below dial - AWA Radiola B121 ad at bottom "SOLID STATE" On the back: AWA Thorn Consumer Products Pty. Ltd./Model No. B121/Batteries 2 x UM-3 OR AA Cells/AM 520 -1620KHz/ Serial No. 75686/ Made in Hong Kong"radio communications, transistor radio

The spade is a memento of the planting of a tree by the responseible Commonealth Minister to recognise the contribution of ATCV and ATCV volunteers to repair of the Australian environment. At the time ATCV had been operating in Ballarat for six years. ATCV volunteers had planted 192,000 trees from April 1987- March 1988. Senator Richardson was then Minister for the Arts and the Environment in the Hawke ALP Government and on 17 November 1988 he planted a tree using this spade at Sovereign Hill Outdoor Museum (at which ATCV volunteers had planted trees which are (by 2010) fully grown and a significant feature of the site). Peter Hiscock was director of Sovereign Hill as well as President of ATCV and among the most significant leaders of ATCV (now CVA). The spade also symbolises the recovery of ATCV (then a small and struggling community group) from near closure owing to the effects of the 1987 recession. The Cyclone Sylvaspade concept was component project of the Australian Bicentennial celebrations aimed at recognising organisations which had contributed positively to conservation of Australia's environment. The concept was originated and driven by Dr Wilf Crane of the CSIRO Division of Forestry and a highly regarded forester and environmentalist and champion of the cause of rejuvenating Australia's degraded landscape with trees. At the naming of a road after him in Canberra he was described as a: "enthusiast, a man of conviction, action, humility and simplicity". Wilf conceived the project, developed the tree planting spade with Boral Cyclone and the Institute of Foresters of Australia and launched it with the then Governor-General Sir Ninian Stephens at the new Parliament House. Cyclone has been a brand name for a manufacturer of good quality hand tools for over a century. It is likely manufacturing was still done in Australia at the time of manufacture of the Sylvaspade. Much of it has now moved offshore, particuarly to China and Taiwan.This object is historically significant because it is a memento of a significant national event, the 200th anniversary of European settlement and the start of a process of environmental change which has had negative consequences and which demands a commitment to conserving the uniques Australian national environment. It recognised the achievement of ATCV in tree planting over six years. The Cyclone Sylvaspade is a practical memento and having the responsible Commonwealth Minister plant a tree with it was highly symbolic of ATCV's practical commitment to repair of our environment all over Australia. It was also used by the Victorian Premier, Hon John Brumby, to plant a tree at the reopening of the Boral Asphalt plant, Ballarat, in April 2010. The spade is No. 12 of a limited edition. This item is a functional tree planting spade called a "Cyclone Sylvaspade", mounted on a block of wood with a plaque. The handle of the spade is made of grey plastic, the haft is light, stained wood, and the blade is manufactured to resemble silver and has engravings. It was donated by the Boral company and presented to ATCV by the Minister of Arts and the Environment, Senator Graham Richardson after he had planted a tree to mark the occasion at Sovereign Hill Outdoor Museum, BallaratOn the stem of the spade here is a label showing the logo of the Boral company which reads "SYLVASPADE Tree Planting Spade - Made in Australia." On the blade is engraved "Cyclone - NUMBER 0012 - SYLVASPADE - 1788-1988" together with the logo of the Australian Bicentennial Authority. The spade is mounted on a sturdy polished wooden board on which there is a brass-coloured plate bearing the words: "PRESENTED BY SENATOR THE HON GRAHAM RICHARDSON TO AUSTRALIAN TRUST FOR CONSERVATION VOLUNTEERS IN RECOGNITION OF THEIR CONTRIBUTION TO THE ENVIRONMENT 17TH NOVEMBER 1988 DONATED BY BORAL LIMITED"of, trust, ballarat, memento, australian, australia, environment, conservation, atcv, for, volunteers, cyclone, sylvaspade, senator graham richardson, 1788 1988 australian, bicentennial, boral, spade, sovereign hill, 17th november 1988, 1988, minister for arts and environment, tree planting, institute, foresters, dr, wilf, crane

A rug designed to celebrate the exhibition of Egyptian art 'Life & Death Under the Pharaohs' from 'The National Museum of Antiquities' in Leiden, The Netherlands. It was made onsite at the National Wool Museum on the 1910 Axeminister loom. The rug was gifted to Brintons Carpets in 1999 as a gesture of thanks along with framed photographs and a certificate of authenticity.W7185 'The Egyptian' Rug Photograph of the wool bobbins on the loom Photograph of the wool bobbins on the loom Photograph of design being prepared for loom Photograph of design being prepared for loom Photograph of design being prepared for loom Photograph of rug being manufactured. Photograph of rug being manufactured. Photograph of rug being manufactured. National Wool Museum Catalogue Worksheet for W7185 page 1 National Wool Museum Catalogue Worksheet for W7185 page 2 Page 1 of a history of Brintons Carpets. Page 2 of a history of Brintons Carpets. A list of catalogues/items in the Brintons Collection donated after closure of Fellmongers Road factory in July 2008.furnishing textile industry, brintons australia pty ltd, carpet, geelong, victoria, furnishing, textile industry

During World War II, over 22,000 Australian became prisoners of war to the Japanese. Most of them were captured at the fall of Singapore in February 1942 and were forced to march to Changi (the major Prisoner of War camp). Later on, the soldiers would be dispersed throughout South East Asia. Upon their return to Australia, very few of them told talked about their experience as prisoners (they often felt ashamed). It took almost 30 years before testimonies, books and documentaries would be published. This ship model was built by Australian prisoners of wars.Model of a Spanish or Portugese 18th Century sailing ship, manufactured from timber, fabric and string. Natural timber colours as well as white, blue, red, green and gold.'To Auntie Helen, many thanks for everything from P.O.W.s Singaporesingapore, war, ships, second world war, model, 1945, models, p o w s, prisoners

These are original items of VX5104 L/Col VJ Schofield MBE who served with 23rd Battalion (The City of Geelong Regiment). In 1929 this Battalion was amalgamated with the 21st Battalion to become 23rd/21st Battalion and adopted the territorial designation of 'The City of Geelong Regiment/The Victorian Rangers'. The Battalion went to the Northern Territory during WW2 before being disbanded, however VX5104 VJ Schofield became redeployed and served in New Guinea during WW2. He was awarded an MBE for his service. (Reference The Argus (Melbourne, Vic.) Friday 20 July 1945. (Awards for Service in Papua-New Guinea). The original plaques were located at the Geelong Returned Soldiers, Sailors and Airman Woollen Mill (commonly referred to as the RS&S Mill). Schofields Father was responsible for the raising of the Mill, with Federal Funding, he was the CEO. It is not known if Victor John Schofield worked at this Mill but the plaques were found there and donated to the Geelong RSL Sub Branch by Roger Burt CEO of Godfrey Hirst Group during the Hirst takerover of the RS&S Mill.Two Plaques - one the Rising Sun, one the Maxwell Family Crest which is related to L/Col Schofield MBE. Timber materials used in the manufacture of both items.None on the Rising Sun. One The Maxwell Family Crest 'Rebiresco' Maxwell.ww2, vx5104 jc schofield mbe, papua-new guinea, city of geelong regiment, 23rd/21st battalion

Warrnambool Harbour Board Receipt Book 5th November 1929-25th September 1930 Manufactured by H.J. Paynter & Co. Printer & Book Binders, Koroit St., Warrnambool warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, shipwrecked-artefact, book, warrnambool harbour, warrnambool harbour board

Warrnambool Harbour Board Receipt Book 25th September 1930- 1st May 1931 Manufactured by H.J. Paynter & Co. Printer & Book Binders Koroit St., Warrnambool