Leyland Metz turntable ladder Manufactured 1938 for Metropolitan Fire Brigade Board, Melbourne (MFB) Steel 5 stage extension ladder on turntable with maximum extension ? m [ ? feet] Mounted on Leyland ? chassis with 8 cylinder petrol engine.

Paper Dispenser, screwed down paper dispenser, metal legs, wooden top (with metal feeder and cutting edge-all this is missing). Thick cardboard roller. Manufactured by Andrew Jack, Dyson & Co Pty Ltd. Lonsdale Street, Melbourneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Photo of the same carton box described at 11518.398 this time taken from the front the words ''Manufactured by Craig&seeley Products a division of aci Australia Ltd 21-35 Hope St. Brunswick Victoria Phone 3871122'' are also visible.Kodakbusiness, retail, gas and fuel

Persian type rug, allegedly from Fortuna Villa. Rug has Aztec type design in blue, navy, orange, cream and beige colours. Woven from silk and hemp type material. Fringed on top and bottom. 1908 manufacture ?bendigo, house, fortuna villa

Cross cut saws have been used for millennia, but they came into wider usage in Europe from the 15th century onwards. The term 'cross cut' refers to the blades on the saw’s cutting edge which come in a variety of different patterns. These saws are specifically designed for cutting across the grain of the wood by timber workers, sawyers, and other land workers for tree felling and cutting up larger pieces of lumber into smaller more manageable pieces. The saws come in variable sizes and lengths and are designed for use by one or two people. With the two-man saws, a method of alternating 'pull and push' to drag the blade back and forth through the timber, maximising efficiency and labour division. Donated by Wilfred Dungan on behalf of the Dungan family Collection originally used on the property of the late Dr Rae Dungan in Falls Creek Rd Olinda, purchased in the late 1930s from Olinda pioneers Harry and Minnie Holden. Also on the property of late May Farndon of Farndon’s and Falls Rd Mt Dandenong – aunt of Dr Rae William Dungan and also an early pioneer. Family holidays and weekends involved use of these sorts of farm implements plus working with horses. Post-war, the Olinda hand tools and machinery moved to the Shady Creek, Nilma North area where bush, pasture and cows had replaced the Olinda property. Wilfred well remembers being on one end of the crosscut saws cutting fence posts, logs and timber under “the tireless and vocal instruction” of a red headed local Darnum Rd legend called Harry Collyer. “He drove an old Rugby car and nearly pulled me through the logs with every cut!” Two handled cross cut saw. One manufactured handle and one bush replacement wedged with three inch nail. 6 broken teeth. Rivets for handle broken off at home-made end. M shaped tooth profile.churchill island, crosscut, saw, tool

Ergot aseptic was used to stimulate uterine contractions after labour to expel the placenta. Pitocin was also used for this but could also be used during labour to quicken and stimulate the labour process. Dr Mitchell Henry O'Sullivan worked in the Victorian country town of Casterton as a general practitioner from 1919 until his death in 1977. He also practiced obstetrics. His son, Dr David More O'Sullivan donated the obstetric bag and its contents to the College in 1999. The bag and contents are a unique time capsule of the type of instruments and pharmaceuticals used in the inter-war period. Box, with lid, labelled "CLASEPTIC AMPOULES/ERGOT ASEPTIC", Parke, Davis & Co, Sydney, manufactured February 1952. Within the box are three smaller boxes containing glass ampoules of "Ergot Aseptic" and two boxes containing ampoules of Pitocin.obstetric delivery

Object. Small square cardboard box with ribbon closure and press-stud catch. Label on top of the box reads "Poudre (Powder) June Roses".Morny Pour Le Teint Manufactured in England by Morny, 201 Regent Street, London.This label is the Registered trade mark of Morny Pty Ltd.personal effects, containers, powder

The first commercial digital hearing aid was created in 1987 by the Nicolet Corporation. The hearing aid contained a body-worn processor that had a hardwire connection with an ear mounted transducer. While the Nicolet Corporation’s hearing aid was not publicly successful and the company shortly folded, it was able to start a competition between companies to create more effective hearing aids. Two years later, in 1989, the behind-the-ear (BTE) digital hearing aid was launched. In addition to the Nicolet Corporation, Bell Laboratories expanded upon the hearing aid business by developing a hybrid digital-analog hearing aid. When the hearing aid was put on in the market, it was instantaneously successful. This development helped bring major changes to the world of the hearing aid. The next major milestone was creating an all-digital hearing aid. The Oticon Company developed the first digital hearing aid in 1995, but it was only distributed to audiological research centers for research on digital technology in the realm of acoustic amplification. The Senso was the first commercially successful, all-digital hearing aid, and was created by Widex in 1996. After the success of the Senso, Oticon began marketing their own hearing aid, the DigiFocus. Presently, the digital hearing aid is now become programmable. By making the hearing aid programmable, it has allowed hearing aids to be capable of regulating sound on their own, without using a separate control. The hearing aid can now adjust itself depending on what environment it is in and often does not even need a physical volume control button. Square, silver metal hearing aid with electronics and AA battery compartments. Has an ear piece and ear mould attached by wire, with a volume adjustment. A body level type, probably a CALAID T manufacture from 1955 to the 70's. On front "C OF A/CALAID/108499" deaf children australia, hearing aid, calaid, commonwealth of australia

This object was donated to the collection by a Trooper Russell Wells 8/13th Victorian Mounted Rifles. It was brought home by his father who was serving in the BEF. He later migrated to Australia.Leather Luger pistol holster with strap securing flap was manufactured by Leder-ZweeisungsAmt-Abteilung (LZA), or leather supply office to the German war department at a factory in Cologne. It was brought to Australia as a souvenir by a British soldier who migrated after the war."LZA J Coln" inscribed on back of holster; "1917" stamped om inside of flap.lza, holster

The Ironmonger Diary 1894 is titled on top of the inner pages "The Ironmonger Diary and Text Book". The inner pages contain blank diary pages, two weeks to an opening, with a light weight, blank pink page between the weeks. There are also Cash Book pages. The front and back sections of the diary contain product advertisements for ironmonger's wares, hardware, household goods, farm machinery, bicycles and even some clothing. There are Tables of measurements, a green-aged section called Classified List of Trade Marks and Brands, The Buyer's Guide and a list of Hallmarks on Plate (such as gold) and the years of manufacture.The Ironmonger Diary 1894 is a hard covered book bound book with gold lettering on the front cover and spine. The front cover includes an index to the information inside. It is titled on top of the inner pages "The Ironmonger Diary and Text Book". The inner pages contain blank diary pages, two weeks to an opening, with a light weight, blank pink page between the weeks. There are also Cash Book pages. The front and back sections of the diary contain product advertisements for ironmonger's wares, hardware, household goods, farm machinery, bicycles and even some clothing. There are Tables of measurements, a green-aged section called Classified List of Trade Marks and Brands, The Buyer's Guide and a list of Hallmarks on Plate (such as gold) identifying the years of manufacture.Pencilled letters on the Hallmarks on Plate page beside some of the letters, identifying the letter on the Hallmark. On the cover is also stamped in gold lettering "OFFICES: 42 CANNON ST, LONDON. E.C./MELBOURNE AND SYDNEY, AUSTRALIA"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, ironmonger diary, 1894, hardware catalogue, hardware diary

A mass produced utilitarian item made for domestic use no history or manufacturing provenance currently available. This design is European and was made by many manufactures from 1900 up to today, the same design and manufacture of new items can be currently sourced from Romania. Item at this time cannot be associated with an historical event, person or place, provenance is unknown, item assessed as a collection asset.Pitcher or jug; enamel French pitcher design, white with blue handle, curved lines, bulbous body.Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, domestic item, jug, enamel jug, enamel ware, drink ware, pitcher

Hand-made manometer is mounted on a flat, rectangular chrome platform. It comprises three valves labelled A, B and C. Valve C is connected to a glass measuring cylinder via a curved metal pipe. Item also includes a small spanner and brown plastic mock leather case with metal clasp, hinges and studs.Engraved into the floor of the device are the instructions on what valves to open and shut for 'infusion, fill and read'. Engraved on spanner: Geoffrey Kaye Engraved on clasp of case: Kaye BJ.2749anaesthesia, dr geoffrey kaye, manometer, venous pressure manometer, measurement, spanner, chrome, invention, manufacture

[a] Cohns Manilla envelope captioned 'July 21st 1942' 'Copy of Return forwarded to Vic Chamber of Manufacturers Statistical Dept 312 Flinders St Melbourne. [b] Documents enclosed relate to Distillers and Spirit Merchants War time regulation manufacture.bendigo, industry, cohn bros brewery

Sharp transistor radio (2 band) manufactured in Japan with reverse painted plastic (ie painted on the inside of the plastic preventing wear or damage to the artwork). (Classic to Japanese radios of this vintage). Includes brown leather case and ear phones in separate container.2 BAND TRANSISTOR 8. Front: ON/OFF Band Numbers. VOL / 8 / SHARP Side switch: SW/BC Back: JAPAN radio, transistor, sharp

A wooden racquet with a convex throat. Throat of obverse features the Horsman 'centaur' trademark in black and gold. Trademark also features on reverse, but with no gold fill. Manufacturing details feature across side of stem. Materials: Wood, Gut, Metal, Lacquer, Leathertennis

A 'Sport' children's tennis racquet with concave throat, and fine-grooved handle, manufactured for New York toy retailer, FAO Schwarz. Bell trademark features on throat on obverse. Materials: Wood, Gut, Leather, Cloth, Ink, Glue, Lacquer, Metaltennis

Strathfieldsaye was first incorporated as a road district on 20 August 1861, and became a shire on 17 September 1866.Strathfieldsaye Council was suspended on 20 July 1993, with a commissioner appointed, after allegations of the council being divided and unworkable.On 7 April 1994, the Shire of Strathfieldsaye was abolished, and, along with the City of Bendigo, the Borough of Eaglehawk, the Rural City of Marong and the Shire of Huntly, was merged into the newly created City of Greater Bendigo. (source Wikipedia). Strathfieldsaye was divided into three wards, each of which elected three councillors; Axedale Ward, Mandurang Ward, Strathfieldsaye Ward. The Shire of Sthrathfieldsaye President's chain was manufactured by P. Blashki and Sons in Stirling silver with a 22ct gold plated finish. Consisting of 20 links, the centre piece depicts the Australian Coat of Arms and drop features an enameled Shire of Strathfieldsaye coat of arms. President / Shire of Strathfieldsaye / Victoria / 1866 / Dieu et mon droit / PROGRESS / 1866city of greater bendigo ceremonial item, shire of strathfieldsaye, president of strathfieldsaye shire

Contract No 25 - Supply of Permanent Way Material - Specification and Conditions of Contract. Specification of works and materials required in the manufacture, supply and delivery of the permanent way materials required by the Melbourne Tramways Trust for the construction of tramways in and about the city of Melbourne. 2 copies.trams, tramways, trackwork, permanent way, specification, contracts

Most surgical wounds are closed primarily, but some are allowed to heal by secondary intention. This usually involves repeated packing and dressing of the raw wound surfaces. Although the long-term care of such wounds has devolved to the care of nurses in the community or out-patient setting, the initial wound dressing or cavity packing is done by the surgeon in the operating theatre. Many surgeons are unaware of the growth of the discipline of wound care, and still use traditional soaked gauze for dressing and packing open surgical wounds and cavities. https://www.ncbi.nlm.nih.gov/pmc/articles/PMC1963638/ The control of bleeding and wound management is vitally important for the survival of the patient.Clear glass round jar and lid, with heavy metal screw turning. Contains 12 yards of 1/2 unmedicated absorbent ribbon gauze.Manufactured in England for F H Faulding & Co Ltd. Absorbent Ribbon Gauze. Green Cross. Unmedicated. 12 yards. ½ inch.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, medical, ribbon gauze, faulding

Sewing machines were used by some ladies to mend and make clothes for the family as shops were some distance away and bought clothes were much more expensive. The sewing machines were also used to sew items for fund raising e.g.. Church and School fetes.Used in the Kiewa Valley.The machine has a brown wood veneer base and a lid with a metal handle in the centre of the top. There is a long screw that fits in a hole at the top of the lid. The screw can be lifted out and used to open and take off the lid. Inside there is a black metal machine which is fitted onto the wooden base. There is a compartment in the base, right of the wheel of the machine, which holds an instruction manual and a tube of ""Singer" lubricant for electric machines". The light, above the needle is covered by bakelite. A leather belt runs around the wheel on the right to enable the machine to run. There is a foot pedal and an electric cord attached."Singer Manufacturing Company" - gold embossed "No. EL 249 355" - oval disc "99K" - disc "Singer Manfg. Co. - discsewing machine; singer manufacturing company; kiewa valley

The water tower on the corner of Pakenham St and High Street Echuca, was designed by Sir John Monash, who was an innovator in the use of reinforced concrete. The tower cost £2,973 and was completed in 1915. It is 108 feet high and holds 150,000 gallons. it was originally connected to the steam powered pumping plant at Echuca East. John Monash was a war hero at Gallipoli in 1915 and also went on to be the Manager of the Victorian State Electricity Commission. Monash University was named after him.The water tower was a revolutionary design in 1915., being constructed of reinforced concrete. It also brought tapped water to people's homes. Sir John Monash made a huge contribution to engineering and social concepts, which was why he was knighted. As well as these contributions to social development, he was also a war hero. Colour photograph of water tower on the south east corner of High and Pakenham street, Echuca. The St Andrews church tower can be seen in the background.On the front of the photograph on the bottom facade of the water tower is painted "E.W.T." (Echuca Water Trust). Printed on the reverse:" this paper manufactured by Kodak"echuca, water tower, echuca-historical buildings, monash, sir john, reinforced concrete building construction

Gramophone needles (stylus) used in gramophones which played 78 rpm shellac records. Tin has the His Masters Voice dog on lid.Metal box containing brass gramophone needles"His Master's Voice" Loud tone English gramophone needles, manufactured for the Gramophone Company Limited, Sydney N. S. W.his masters voice, styluses (audio), gramophone needles

The letters contained within this ledger provide an overview of correspondence which occurred around matters such as roadmaking and maintenanceProvides a detailed record of correspondence relating to engineering matters in the shire and surrounds and also a comprehensive list of organisations associated with this work.Dark blue watermarked cover with fawn suede binding and corners. Spine has three coloured rectangles with the following in each: Correspondence and reports, Country Roads Board and Shire of Warrnambool. There is an index at the front and the ledger contains copies of correspondence relating to roads, maintenance and infrastructure.Inserted in ledger is1) typed invoice from The Government of Victoria to Shire of Warrnambool for 1915/16, 2) Original of two pages showing list of contracts on Garvoc Laang Road. Arnall and Jackson, Engravers and Lithographers. Printers and Manufacturing stationers 478 Collins Street, Melbourne. No B 22065 23/09/14. warrnambool, warrnambool shire engineer, shire correspondence, crawley, road works, bridges, bitumen roads, 1914-1925, country roads board

A detailed continuum of correspondence showing the progress of development in the district and the co-operation and cost sharing between the different shires to have work completed. This collection of letters provides a very good overview of issues and work covered in the early settlement days of the district. Cover is brown watermarked patterned cloth with tan suede binding and corners. Inside front and back covers is green and red patterned paper. Alphabetical index at the front. The ledger contains copies of letters which were written to local shires and lands Departments and relate mainly to matters of infrastructure and local government charges There are a number of invoices at the back of the book.: Letter Book No. on spine. Gold lettering on red. Serial numbers, signatures, engravings, dedications in books, manufacturing details or personal markingswarrnambool, warrnambool shire, hampden shire, mount rouse shire, geelong to belfast road, alfred davies, 1873-1875, shire correspondence

Kelvin Company History: The origins of the company lie in the highly successful, if strictly informal, the relationship between William Thomson (1824-1907), Professor of Natural Philosophy at Glasgow University from 1846-1899 and James White, a Glasgow optical maker. James White (1824-1884) founded the firm of James White, who was an optical instrument maker in Glasgow in 1850. He was involved in supplying and mending apparatus for Thomson's university laboratory and working with him on experimental constructions. White was actually declared bankrupt in August 1861 and released several months later. In 1870, White was largely responsible for equipping William Thomson's laboratory in the new University premises at Gilmore hill. From 1876, he was producing accurate compasses for metal ships to Thomson's design during this period and this became an important part of his business in the last years of his life. He was also involved in the production of sophisticated sounding machinery that Thomson had designed to address problems encountered laying cables at sea, helping to make possible the first transatlantic cable connection. At the same time, he continued to make a whole range of more conventional instruments such as telescopes, microscopes and surveying equipment. White's association with Thomson continued until he died. After his death, his business continued under the same name, being administered by Matthew Edwards (until 1891 when he left to set up his own company). Thomson, who became Sir William Thomson and then Baron Kelvin of Largs in 1892, continued to maintain his interest in the business after James White's death in 1884, raising most of the capital needed to construct and equip new workshops in Cambridge Street, Glasgow. At these premises, the company continued to make the compass Thomson had designed during the 1870s and to supply it in some quantity, especially to the Admiralty. At the same time, the firm became increasingly involved in the design, production and sale of electrical apparatus. In 1899, Lord Kelvin resigned from his University chair and became, in 1900, a director in the newly formed limited liability company Kelvin & James White Ltd which had acquired the business of James White. At the same time Kelvin's nephew, James Thomson Bottomley (1845-1926), joined the firm. In 1904, a London branch office was opened which by 1915 had become known as Kelvin, White & Hutton Ltd . Kelvin & James White Ltd underwent a further change of name in 1913, becoming Kelvin Bottomley & Baird Ltd . Hughes Company History: Henry Hughes & Sons was founded in 1838 in London as a maker of chronographic and scientific instruments. The firm was incorporated as Henry Hughes & Sons Ltd in 1903. In 1923, the company produced its first recording echo sounder and in 1935, a controlling interest in the company was acquired by S Smith & Son Ltd resulting in the development and production of marine and aircraft instruments. Following the London office's destruction in the Blitz of 1941, a collaboration was entered into with Kelvin, Bottomley & Baird Ltd resulting in the establishing Marine Instruments Ltd. Following the formal amalgamation of Kelvin, Bottomley & Baird Ltd and Henry Hughes & Sons Ltd in 1947 to form Kelvin & Hughes Ltd., Marine Instruments Ltd then acted as regional agents in the UK for Kelvin & Hughes Ltd who were essentially now a part of Smith's Industries Ltd founded in 1944 and the successors of S Smith & Son Ltd. Kelvin & Hughes Ltd went on to develop various marine radar and echo sounders supplying the Ministry of Transport, and later the Ministry of Defence. The firm was liquidated in 1966 but the name was continued as Kelvin Hughes, a division of the Smiths Group. In 2002, Kelvin Hughes continues to produce and develop marine instruments for commercial and military use. This model compass is a good example of the commercial type of instruments made by Kelvin & Hughes after the world war 2, it was made in numbers for use on various types of shipping after the second world war and is not particularly rare or significant for it's type. Also it was made no earlier than 1947 as the firms of Kelvin, Bottomley & Baird Ltd and Henry Hughes & Sons Ltd who took over from Smith & Sons were not amalgamated until 1947. Given that Smith and Sons is engraved on the compass with Kelvin & Hughes it can be assumed that this compass was made during the company's transitional period to Kelvin & Hughes.Compass, marine or ship's card compass, gimble mounted, with inscriptions. Type is Lord Kelvin 10 inch compass card. Made in Great Britain by Kelvin Hughes Division of S. Smith & Sons (England) Ltd. "LORD KELVIN 10.", "COMPASS GRID", "MANUFACTURED IN GREAT BRITAIN BY", "KELVIN HUGHES DIVISION", "S. Smith & Sons (England) Ltd".flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, marine compass, gimble compass, ship's compass, lord kelvin compass, smith and sons england ltd, henry hughes & son ltd london england, kelvin bottomley & baird ltd glasgow scotland, kelvin & hughes ltd, navigation instrument, scientific instrument, william thomson, james white, baron kelvin of largs

Churchill Island Heritage Farm has a large photograph collection dating from the mid-nineteenth century to the last decade. This series of photographs show events and people from the Churchill Island precinct and the enormous amount of collaboration and work that went into the development of the heritage area and making it accessible and interactive for visitors of all ages.Muted aerial photograph of Churchill Island. Small portion of plane's wing visible in bottom left corner.Catalogue number in pencil on reverse. Print on reverse bottom: “COWES 03601 NNNBA” Printed over reverse: “THIS PAPER MANUFACTURED BY KODAK” churchill island, aerial photograph