Two copies of Yarra Trams internal newsletter "Update", All A4, printed in full colour. .1 - Magazine - four pages - issue 2 of 19/11/2010 - Federation Square (Swanston St) crowd control, performance, depot visits by the CEO, Port Melbourne, Safety, Docklands works, Movember, Special events, new uniforms, the retirement of Des Davies, celebrating 125 years of Melbourne trams. .2 - six pages, one sheet, issue 4 of 21/12/2010 - performance, response units, fleet operations, Oprah Winfrey tram, Carlton Control, Preston Workshops, appeals, safety, a Golding cartoon of a tram on a curve, Keolis, telco agreement with VicTrack.trams, tramways, yarra trams, traffic control, trackwork, spencer st, fund raising, carlton control, victrack, fleet operations, preston workshops, cartoons

This book reproduces the SRD Technical Handbook, which was a top secret equipment supply catalogue published for internal use within SRD in February, 1945. While many of the items in the handbook are British SOE “special stores” shipped over from London, a great deal of developmental and experimental work was done by SRD’s Technical Directorate at its technical research station at Mount Martha on Victoria’s Mornington Peninsula. A flick through these pages will show unusual items such as folding midget motorbikes, silenced pistols and machine guns, knuckle-knives, mini-submarines, booby trap devices and more. In fact, it contains just about everything a WWII-era commando or a spy required to successfully complete a secret mission. Lavishly illustrated with original wartime photographs, plans and diagrams, many never before seen publicly, the S.R.D. Technical Handbook is timely evidence that mankind is never as ingenious as he is during time of war.australian special operations, special forces, commandos, world war ii

The Bow Saw is considered by many to be the most satisfactory saw for cutting shapes since the narrow blade negotiates curves easily, and is held in tension. Both the handle and knob (at the other end of the blade) can be turned so that a cut can be made more or less parallel to the required cut. Obviously the blade must be free of twist when in use. It is available with blade lengths of 25 to 40 cm (10 to 16 in). Generally both hands grips the one handle, hence the bulbous shape with narrow neck, but when thick wood has to be sawn it is helpful to have a person at each side, both sides of the wood having been marked. In this way it is much easier to keep the cut square to the sides of the timber. The rivets holding the blade to the handle can be withdrawn so that the saw can be used for an internal cut, the blade being threaded through a hole drilled through the timber.A vintage bow saw used in cabinet work by a cabinet maker in the mid to later part of the 19th century probably made in England.Bow saw wooden frame and handles. Twine attached to upper section of frame.Noneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, bow saw, carpenders tools, cabinet makers tools, wood working, wood saw

This overcoat was designed and tailored by Dominex, a company that sold clothing in high end department stores such as Myer and David Jones in the 1940s through to the 2000s. As pictured in the accompanying advertising, Dominex looked to produce clothes for women to “casually, confidently wear … the exquisite styling and superb tailoring of… Dominex Coats”. This sentiment was carried by the company for more than 60 years. Amanda Morgan, a director of the Dominex fashion label in an interview from 2003 said “Not everybody wants sass, or sex, or high fashion for that matter. Au contraire. Our customers will be stylish, sophisticated and womanly, but we don’t do shoestring straps or asymmetrical lines." Dominex was a label specialising in exceptional quality "traditional" dressing for corporate wear. Their clothes looked to provide women with a return to the tried and true values of elegant, unpretentious, classic dressing. "Our look is European-influenced," Morgan explained further. "Inspired by Armani, Valentino, Chanel and Escada. Suits have been specially dyed in France to ensure the perfect shade of ice blue, lemon, grey, or slate. Fabrics are natural, silk and linen. Shapes are stylish, with an almost 1930s feel; classic pants, silk shirts, structured overcoats with elegant-length” Returning to this overcoat, it has a label on the inside which reads “Pure Wool Material by Godfrey Hirst of Geelong”. Nowadays Godfrey Hirst produce flooring products and are the largest manufacturer and exporter of residential and commercial carpets in Australasia. They have expanded into hard flooring and left their fashion days behind. This overcoat serves as a useful example of a different time for the company; before they made the change to concentrating exclusively on flooring, when they produced fabrics to be tailored for the height of Australian fashion. This overcoat was purchased and worn by Joan Waller, aunty of the donor, Kim Rosenow. Kim said her aunty was from Ballarat but frequently shopped in Melbourne to keep up with the latest trends. Her aunty Joan fitted the target demographic of Dominex well, as she needed to look sophisticated and elegant at social events and work. Kim donated the overcoat to the National Wool Museum in 2021. Green singled breasted overcoat with a narrow overlap and one column of buttons for fastening. The overcoat features notched lapels of a medium width and two large buttons of a green & dark green marble. The overcoat has two semi-visible jetted pockets at the hips. Internally, the overcoat features a black silk lining for comfort. It also features a stitched patch on the left side of the opening which reads “Pure Wool Material by Godfrey Hirst of Geelong”. At the collar, another patch reads “Dominex REGD”. At the cuffs, the overcoat finishes in a type of gauntlet cuff which stretches back over 200mm. The decorative finish utilises no buttons and has thick piping to accentuate this design feature. The overcoat finishes with a simple invisible hem at the bottom.Wording, gold. Patch stitched at collar: “DomineX / REGD.” Wording, black. Patch stitched at left off opening: “PURE WOOL MATERIAL BY / Godfrey Hirst / OF GEELONG”dominex, fashion, women's corporate wear, godfrey hirst, overcoat, wool clothing

Demonstrates uniform cap manufacture, badge and has a strong association with a former Ballarat Driver - Norm HuntSEC Motorman/Drivers/Conductors cap - green cloth exterior, grey cotton interior lining, brown leather internal hat band, black cotton hat band on exterior with a plastic band at the front half of the cap terminating in two small SEC metal buttons on either side, black plastic peak fitted with cap or badge No. 20, nickel plated silver, in the centre of the cap above the hat band. Sewn on the inside is a label "Commonwealth Government Clothing Factories Melbourne (very faded)" and stamped "6 3/4". See also Reg. Item 3044 for an ex Geelong cap. Stored with the cap are a copy of the SEC By-Law 1, August 1965 and the Federal Rules of the ATMOEA - 1969 and three SEC tickets.tramways, trams, uniforms, cap badge, cap

Light tan coloured auction catalogue for a sale at the Yackandandah Gold Mine, Yackandandah on 29th November, 1939 of Complete Mining Machinery, Battery, Buildings and Equipment, By Order of Geo. Brown, Esq, Secretary for Mines, Melbourne. The Plant Includes:- Double 8in Winch, Internally Fired Return Tube Boiler, 10 Head Thompson Battery, 5 Head Thompson Battery, 'Broome & Wade' air Compressor, two Air Receivers, 12in Jaw Crusher, Vertical and Horizontal Steam Engines, Poppet Legs, Trucks, 30 H.P. 'Tylor' Truck Engine, Friction Winch, Tools, Tanks, Piping, Corrugated Housing and Valuable Equipment.J.; H. Curnow & Son were the auctioneers. Catalogue printed by The Cambridge Press.business, auctioneers, j h curnow & son pty ltd, ian dyett collection - auction catalogue - yackandandah gold mine, geo brown esq, j h curnow & son, the cambridge press

Trunk belonged to Godfrey Hirst and was used in his travels between Australian and England. Godfrey Hirst's first trip to Australia was in 1885 and his last trip was in 1916. In this time Hirst was known to travel between Australia and England regularly on the lookout for the latest updates from England that he could bring to his factory in Geelong. The trunk was donated by Susan Wiffen (née Betts), the great granddaughter of Godfrey Hirst. Godfrey Hirst set up a successful woollen textile factory in Geelong in 1888. The factory stayed in operation until 1966. The company still bearing his name has since been purchased by various investment companies but continues to be the largest carpet manufacturer in Australia. Predominately black trunk with two wooden bands around the sides of the trunk and five across the top (lid). The lid is slightly curved and contains white printed lettering GODFREY HIRST. The trunk also contains small wheel underneath locked for pushing the trunk sideways only. The trunk contains two leather handles on either side. Internally, the trunk contains three levels of storage with baskets stackable on top of one another. The baskets are finished in a white and brown striped fabric which has red taped edging for additional strength. The top layer of baskets also has brown leather latches in order to keep the basket lids shut. The layered levels of storage are synonymous of Saratoga style trunk.Printed. Letters: Godfrey Hirstgodfrey hirst

Series of two items contained with Reg item 2400, a Folder with papers, titled "Yarra Trams 2006 - 100 Years of electric trams - Press Pack", issued 10 August 2006 by Yarra Trams and Siemens for the centenary celebrations of electric trams .1 - Pamphlet - A4 sheet, full colour - titled - "The Siemens tram from past to present" - outlines the history of Siemens trams from 1881 with images of trams through to 2002 and development of the Combino trams. .2 - Pamphlet - A4 sheet, full colour - titled - "World-class trams for a world class city" - provides a case study of the low floor Combino trams, drawings of the five section trams, internal views and details of the trams and its features.trams, tramways, combino, siemens, germany

Kingston Roadliners (F. Kingston, Proprietor) STAWELL - GRAMPIANS DAILY Coach for the Grampians meets mid day train at Stawell Return Daily Make the Grampians your next vacation Daily Conducted Tours, from Hotels and Guesthouses in Stawell and Hall's Gap to WONDERLAND - MCKENZIE FALLS - LAKE WARTOOK - MT. VICTORY - MT ROSEA - WANNON VALLEY conducted Hiking Trips Arranged Stawell booking office: 75 Main Street - Phone: Stawell 214, Hall's Gap booking office: Main Road - Phone: Hall's Gap 35, Bookings also from Vitorian Government Tourist Bureau, Cars for hire GRAMPIANS HOUSE The Most Conveniently Situated Tourist House in the Grampians. Ballroom, electric light, large garage, hot water service, hot water in all rooms, internal sewerage. Tennis, fishing, shooting, Alongside is the Bowling Green, where visitors are welcome to play. Phone: Hall's Gap 28. Tariff on application. Manageress: Mrs, E. MatthewsAdvertisement for Kingston Roadliners, Grampians House and Map of the GrampiansAdvertisement in Broadbents, Guide of western Victoria, and South-East of S.A.media, advertisements, grampian house

The Kettle Drum Drenching Gun was invented and predominately used in the 1940s and 1950s. This Drench Gun was constructed by Moffat-Virtue Ltd, an Australian company formed by John Moffat and William Wright Virtue. Moffat-Virtue Ltd were a Sydney company whose products, including windmills and shearing machinery, were well known in rural NSW throughout the mid twentieth century. The company was taken over by Fire Fighting Enterprises Ltd in June 1966 (Rudder, G 2020). The Drench Gun was likely used to drench sheep with carbon tetrachloride for internal parasite control. These guns were widely used in Australia. There were problems with the product, however, which contributed to its demise. On hot days and if the sheep struggled while being drenched, some fluid would go into the wind-pipe and into the lungs of the sheep, sometimes with fatal results. At times nearly one-third of a flock could be found dead. Inexperienced operators, overdose and weather were often blamed for the deaths (Davidson, K 2012). A brass drenching kettle consisting of a brass bowl and a detachable plunger mechanism. The plunger is alloy and the handle has a hinge to create suction to spray liquid out the brass nozzle.Moffatt-Virtue Limited 3841 C V ROBERTS/ PATENTEE Pest Arrestorsheep - diseases sheep - parasites

Probably used in the past to house the Signal Flag set at the lightstation. Appears to have been stored in the old stables for a number of years.The rectangular wooden cabinet has the distinctive features of a flag locker, comprising numerous open compartments of the same size each for storing a signal flag of a unique design. It has three internal shelves and a bench top, and is painted grey, a colour that is used for many of the wooden utilitarian furnishings in the six lightstations Parks Victoria manages. The cabinet, without its flag contents, was found in storage in the old stone stable building and is highly likely to be original to the lightstation. A wooden flag locker is held at Wilsons Promontory Lightstation. A wooden locker comprising two sections of 16 pigeon holes and four cupboard doors is held at Cape Otway The two flag lockers at Cape Nelson Lightstation are included in Victorian Heritage Register for contributing to the significance of the lightstation. The Nelson, Otway and Promontory lockers have associated sets of flags which are original to the lightstations. The Gabo Island cabinet has second level contributory significance for its provenance to the lightstation.Timber cabinet painted grey, partitioned with numerous open compartments of the same size .

Standard issue battle jacket for the Royal Australian Artillery, issued by defense department. Pattern 1949 Khaki Battle Dress Blouse. Two deep button breast pockets, Four buttons on right side concealed by right side jacket. Belt hem located at the bottom with buckle. Hemmed arm cuffs with one button on left and right sleeves. Two internal pockets on right and left side. Cord lanyard hanging from left sleeve. Patch with words 'Royal Australian Artillery' embroidered in red on navy on both left and right shoulders. Separate embroidered crown placed above both embroidered text patches. Material with embroidered crown attached with button at the top on right and left shoulder. Crown is made up of red, purple, cream and brown string. Material loop attached inside top of jacket at the neck.Sewn patch with inscription R. J. Hatch & Co. 1950 Size......... MADE IN AUSTRALIA Regimental No. ...................... Name Stamp on inner lower jacket - '170' with arrow point up to the number.military uniforms, army, battle jacket

When this AVOMETER was being utilised in the early 1950's it was at the "leading" edge of electrical measuring instrumentation.The first meter was produced by Automatic Coil Winder and Electrical Equipment Co. in 1923. This model was produced in the time from 1933 to 1951 when it was superseded by the most popular model, Model 8 (1951 to 2008).This AVO meter brought the measuring of three electrical power indicators i.e., amps, volts and ohms into one measuring unit. By using a "one fits all" unit, the carrying of separate measuring devices was reduced considerably. The need for a mountainous and a large area of operational requirements, such as the SEC Vic Kiewa Hydro Electricity Scheme, to minimise the weight of equipment carried by electricians and technicians was of the utmost relevance. The significance of this meter to the Kiewa Valley region relates to the impact of modern technology (at that time) upon a mainly rural environment. This equipment shows how the boost of "modern" equipment into the area because of the "Hydro Scheme" was facilitated a lot faster than would have taken under "normal" evolutionary time. The speed of information on all "new technology" had a relatively slow assimilation rate to those living in rural communities. This AVOMETER is a Model 7 MKII, production pre 1951. This meter measures electrical Amps, Volts and Ohms and has two internal batteries for its power. The main casing is made from aluminium with a bake-lite front. The front has a "window" detailing, with a needle pointer, the amount of electrical power being tested. There are two big dial switches, detailing Direct Current(DC) and Alternating Current(AC) when reading measurements of Ampere, Voltage and Ohms for power. This meter took the place of three or four meters used earlier. Modern meters (2000 onwards) have become digilised and are considerably lighter in weight and smaller. There are two electrical connection leads (one black and one red) each has a removable clasp and is 125cm long.Molded on the front centre panel " UNIVERSAL AVOMETER". Below this and above the left hand dial "D.C. SWITCH" .Above the right hand switch the right "A.C. SWITCH". On the left of each switch is an arrow pointing to it.The left switch is marked with a "+" and the right one with a "-". There is a "divisional 2" mark. Between and below the dials is "CUT OUT" plunger.electrical meters, electrical equipment, sec vic., state electricity commission of victoria, mt beauty, bogong village

The cartoon was drawn by John Nathan, one of the final year students in the first class to graduate with the diploma of Licentiate of Optometric Science from the Australian College of Optometry. His father was Bertram Nathan who played important roles in obtaining registration of optometrists in 1934 and on the Council of the College. John was to become Director of Studies from 1950 to 1964 and President of the College from 1969 to 1978. He also paints in oils.This cartoon is significant to the Australian College of Optometry as a piece of memorabilia from the class of 1944. It is one of only two drawings of optometrists in the Kett collection.Framed ink on paper cartoon drawing of final year Optometrical Science students of 1944 in Melbourne. The characters are depicted playing in an optometric consulting room. It is headed 'Final Year Optometrical Science 1944' and at the lower edge are the names of the students 'John Nathan, Tony "Craniclaw" Douglas, Vans Ovenden and Doug Allen'. Signed by the artist 'John Nathan'.This cartoon drawing depicts final year Optometry students in a contemporary consulting room of 1944. They are shown in typical optometrists' attire of dark trousers, side-buttoning short white coats and PD ruler in the breast pocket. The room has an electric instrument stand, hydraulic patient chair and internally illuminated test chart. The drawing shows the artist's name 'John Nathan' and is mounted in a black frame.Signed by the artist 'John Nathan'students, optometry, optometrical science, cartoon, drawing

Contract of sale of land dated 28th November, 1958 between Mrs. V. Hunt (seller) and Mrs. L.M. Salis (buyer). Solicitor for vendor: Messrs. Hyett, Willis & Hyett, Bull Street, Bendigo. Solicitor for purchaser: Messrs. Watson, James & Rogers, Bull Street, Bendigo. For so much and such parts as lie above the depth of fifty feet below the surface of land being lot 1 on the vendor plan of subdivision situate at the corner of Victoria and Prout Streets, Bendigo part of allotment 420A section K land being delineated and colored red, blue and brown on the map in the margin hereof, together with all buildings thereon and with all floor coverings, internal and external blinds, curtains and electric light fittings and shades. Price 2,000 pounds.organization, business, h.a. & s.r wilkinson real estate

Blazer World Swimming Championships California 1975. Dark green single breasted wool blazer. Fastened with one 2cm metal button. Three external front pockets. LHS breast pocket (13 cm X 13 cm) embroidered with Australian Coat of Arms ''Amateur Swimming Championships Manager 2nd World Championships CALI-1975''.Two pockets below waist level (18 cm X 21 cm) have decorative turned down hem across top of pocket. Two internal pockets in lining - LHS with zipper opening, RHS with slit opening. Back centre vent (30cm) with stitched down half belt across back above vent (5cm X 37 cm). Padded shoulders. Fully lined with leaf green satin.''By A.W.S.Huntington Sydney.costume, male, dark green blazer.

Magill's laryngoscope with open straight blade and flat round speculum and a detachable light bulb connector, the bulb is missing. This laryngoscope is a previous version of the battery use ones conceived around 1920 therefore circa 1900. The design of the handle is similar to the Shipway laryngoscopes with a curved and pointed end and anatomical handle grip. The blade attachment place seems to be an adaptation to this kind of blade which differs from original models. The piece has several scratches and deep hit marks, as well as oxidation spots mostly around the internal canal of the blade. There is presence of resin residues on some surfaces. A visible different kind of metal was used at the blade base attachment place and for the light bulb connector. Engraved on handle its model type and in the arm of the handle a possible manufacturer name (illegible) and the place where it was made.Engraved at the handle, MAGILL'S LARYNGOSCOPE. Stamped at the arm of the handle back side, STAINLESS STEEL Stamped at the arm of the handle front side, A[not understandable text might be Allen & Hanburys Ltd.] / LONDON / JZmagill, ivan, laryngoscope, 1900, resin, shipway, light bulb, magill laryngoscope

The story of 90 years of wool classing between father & son begins in 1936, when a young boy by the name of Stanley James Hucker walked through the doors of the Gordon Technical School in Geelong. Born in 1921, Stanley was 15 years of age when he began his 3-year course in Wool Classing. 30 years later, Stanley’s second son Denis completed the same 3-year wool classing course. Beginning in 1966, Denis attended the same Gordon Technical School and walked the same halls as his father before him. Stanley finished his course in 1938. He went back to the family farm in Lake Bolac for a brief period before enrolling in the Second World War. At the completion of the war, Stanley returned home and married before gaining a soldier settler allotment, north of Willaura. This enabled Stan to use his wool classing knowledge. He ran between 1,500 and 2,000 sheep for many years, while his wool classer stencil also allowed him to go out and class at various sheds around the area. He held his stencil from 1938 until he retired at the age of 60 in 1981. On retirement, his second son Denis was working in the district, managing a local property while also leasing land himself. Upon his father’s retirement, Denis had the opportunity to lease his father’s farm, an opportunity he could not refuse. Denis had finished his wool classing course at the Gordon Technical School in 1968, graduating dux of his class. He began working with a local contractor and started classing wool in his team. Denis gained a great deal of experience working as part of this team in big sheds of up to 8 stands servicing between 10 & 20,000 sheep. It was not all smooth sailing for Denis however, and he soon learnt an important lesson. Class wool the way you’re taught, don’t listen to the owner standing over your shoulder. At a clip of Corriedales near Casterton, Denis was pushing too many fleeces into the line of fine wool. This resulted in a notice from the Australian Wool Exchange (AWEX) “mixing counts too much, submit three clips for inspection”. Denis was able to submit 3 clips with no further complaints, however, this proved a valuable lesson he would never forget over his long career classing wool. In the early 1980s, when Denis was leasing two properties including his father’s, things were going well until drought struck. February 1983 was the date of the Ash Wednesday bushfires, and saw Melbourne have three days over 40 °C for only the second time on record. This period saw Denis give away farming, turning towards contracting work instead. After the difficult times of the early 1980s, the next two decades were a good time for the sheep industry. 15 micron wool was selling for prices between 4 to 5,000 cents per kilo, double what you’d expect for the same wool in 2022. In 1995 a single bale of wool sold for a million dollars. This was a good time for Denis too. His contracting work saw him employing local shearers and shed staff. His team was involved with the shearing and classing of more than 130,000 sheep. After 20 years of contracting, it was time for Denis to transition into the next phase of his life. He gave up independent contracting, preferring instead to return to being a member of someone else’s team. In 2018, having completed 50 years of wool classing, it was time to call it a day and retire completely. At the annual Gordon Wool School Old Students Association dinner held in 2018, Denis was presented with his 50 years as a registered wool classer stencil awarded by the Australian Wool Exchange (AWEX). This is a rare honour achieved by few. As of February 2020, a total of 430 wool classers had achieved this 50-year milestone. For Denis however, his proudest achievement is achieving 90 years of wool classing with his father. The National Wool Museum is proud to share the collection of objects gained from 90 years in the wool classing industry by Stanley and Denis. This ranges from Stanley’s first stencil and Wool Sample book, started when he first attended the Gordon in 1936. The collection concludes 90 years later with Denis’ 50 years of wool classing Stencil. The collection contains many more objects, all telling the story of these 90 years, and the hard work invested by this dedicated father and son duo. This is the fifth in a series of 5 wool classing exercise books. They were written by Stanley Hucker in his time at the Gordon Technical College from 1936-1938. This book begins in a white cover with blue ink swirls covering its entirety. It has a central sticker label. Internally, the book is handwritten on yellowed pages with blue lines for the assistance in clarity of handwriting. The pages are also surrounded by a margin of red pen. The exercise book’s content is about recording and tracking the financial transactions of Sheep Stations and Wool Classers. It is handwritten. A selection of pages have been photographed to give an impression of the information taught in classes, 90 years ago. This includes information about: - General bookkeeping terms and definitions - Practise invoices - Larger multiple page definition of bookkeeping - Assets liabilities - Practise bale bookFront Cover. Wording, printed and handwritten. “The “Gordon Geelong / CASH BOOK / Stanley Hucker / Station + Farm / Bookkeeping / Bookkeeping / Terms 1.2.3 for 1936. 1937. 1938”gordon institute geelong, wool classing, 1930s sheep farming, 90 years wool classing between father & son

Norma Dessent (the donor) was cleaning out her Mother-in-law Amy Dessent’s home, after she passed away in 1995. She came across a collection of gunny sacks for chicken feed, potatoes, and flour. Norma gave the bags to her good friend Beryl Andersen, thinking she might be able to make use of the material in her quilting. Many years later in 2001, Beryl gave Norma this quilt made in a wagga style out of the bags. This was both a great surprise and a great delight for Norma. Amy Dessent was a housewife. Her chickens were her friends, keeping her company as she worked in her renowned garden and while she cooked and maintained a beautiful home. Typically, Amy would have a dozen chickens clucking around at a time. In the style of the time, everything was kept for a possible repurposing later in life, such as these gunny sacks. The Chicken Feed Wagga was created in Ballarat by Mrs Beryl Andersen. Beryl was the inaugural president of the Hamilton Quilters Guild and is a well-known quilter. Perhaps her best-known work was the “Quilt for Hope”, a living memorial for victims of institutional church-related sexual abuse. More information about this quilt can be found on the following link. https://www.nationalquiltregister.org.au/quilts/quilt-of-hope/). The wool blanket used as a backing belonged to Beryl’s mother. Beryl’s mother married in 1930 and the blanket is thought to have been a present from this wedding, making the blanket close to a century old. Norma donated the quilt to the National Wool Museum in 2021 as a result of downsizing. She no longer had room for the quilt to hang on her wall. Before downsizing, the quilt had hung in the entryway to her home for the last two decades.Wagga style quilt made with a appliqué top layer of gunny sacks that once held chicken feed, flour, and potatoes. The insulating internal material is not known. The backing fabric is made from a cream woollen blanket. The edges are bound with a material of a red and white plaid. The gunny sacks are quilted together with a machine stitch of red thread. The sacks contain imagery pertaining to their previous use. Some sacks have an image of a chicken applied with blue, red, or green ink. Other sacks contain imagery of potatoes. While other sacks contain information “Minimum Crude Protein 14%, Minimum Crude Fat 3%, Maximum Crude Fibre 7%”. One of the sacks shows a handwritten price for a bag of chicken feed in a red ink.Numerous. See multimediaquilts, wagga, gunny sacks, upcycle

Yields information about the operation of the horse tram in Wendouree Parade and some of the people involved and the way it was operated and the repainting of tram 671.Set of eight colour photographs taken by Carolyn Dean on 1 October 1995 during operations of the Horse Tram No. 1 in Wendouree Parade and of tram No. 671 during repainting. Printed on Fujicolor paper. .1 - BTM trams 27 and 14 at Gardens Loop .2 - 14 in loop (with trolley pole facing for northbound running) and No. 1 passing. .3 - ditto .4 - ditto .5 - ditto .6 - view from the top deck, with the two horses in photo - taken south bound from St. Aidans Drive .7 - No. 671 being repainted, on depot fan - prior to lining and internal blue paint panels .8 - ditto with 14 in background. .9 - as for .2 See also Reg Item 4070.1 > 4070.5 for other photos of the same event. On rear of each photo in blue ink "1.10.95" and "C. Dean"horse trams, wendouree parade, gardens loop, 671, tram 14, tram 27, tram 1, tram 671

3044.1 SEC (Geelong) Motorman/Drivers/Conductors cap - green cloth exterior, grey cotton interior lining, brown leather internal hat band, black cotton hat band on exterior. Black plastic peak fitted with cap or with four holes for the employee badge number in the centre of the cap above the hat band. Sewn on the inside is a label "Commonwealth Government Clothing Factory Melbourne" and stamped "7 3/8". The plastic band at the front half of the cap terminating in two small SEC metal buttons on either side is not present. The holes for this are not visible - may not have been present on Geelong caps? 3044.2 - two small SEC Button badge - nickel plated silver with "Stokes" "Vic" stamped on rear. See also Reg. Item 2894 for a Ballarat Cap. On inside of leather hat band in ink "Mr. R. Evans" and "90 Albert St. West Geelong".tramways, trams, uniforms, cap badge, cap

Book featuring photographs of Australian and Museum tramcars, includes Ballarat, Bendigo and Geelong.Full colour book, 32 pages plus card cover, titled "Trams of Australia Vol 2 - A pictorial Presentation", published by Topmill Pty Ltd, Silverwater NSW c2008/9. Features colour photos of trams from Melbourne (VR and MMTB), Sydney, Rockhampton, Brisbane on the front cover and Ballarat and Bendigo on rear. Text written by Michael McGowan, internal photos, both Museum and pre-museum operational systems of Ballarat, Sydney, Brisbane, Melbourne (VR & MMTB), Geelong, Freemantle, reproduced postcards, Scrubber 8W in Swanston St, Ballarat Tramway Museum, Perth, Tasmanian Transport Museum, Perth Electric Tramway Society (PETS), Archer Park Rockhampton, Sydney Tramway Museum, Adelaide, Ballarat Santa Tram (1970)trams, tramways, ballarat, bendigo, geelong, melbourne, sydney, brisbane, fremantle, hobart, adelaide, perth, santa tram, myers

Clothing. Women's black embossed silk skirt. Part of two piece set(bodice 11410.1). A shaped skirt with 2.5 cm cotton fabric waistband with three hanging loops attached. Centre back opening (20cm) fastened at waist with two metal hooks and eyes. Two metal eyes on waistband for attaching to the bodice. The front of the skirt has two vertical sections of appliquéd decorative beading (38 cm X 5 cm). The hem of the skirt is edged with black satin binding. The skirt is fully lined with brown cotton fabric. At centre back below the opening is an internal pocket (40 cm X 8 cm) of lining fabric. Historical Notes: This bodice and skirt belonged to Elizabeth Graydon (nee Richardson). Photograph of Elizabeth wearing this outfit (11410.3).

This pressed brass artefact is a highly decorative side bracket for distancing a gas lamp flame from the internal wall of a building. It is hollow and made of light gauge metal, with an innovative aesthetic design, but no internal piping to transport gas. It was recovered from the wreck of the LOCH ARD. There are similar artefacts in the Flagstaff Hill collection. The LOCH ARD left Gravesend (London) on 2 March 1878, bound for Melbourne, with a crew of 37, 17 passengers, and a diverse and valuable cargo of manufactured goods, luxury items, and refined metal. Some of the cargo was destined for display at Melbourne’s first International Exhibition in 1880. At 3 am, 1 June 1878, the ship was wrecked against the high limestone cliffs of Mutton Bird Island on Victoria’s south west coast near Port Campbell. Only two people survived the disaster — Tom Pearce, a male crew member, and Eva Carmichael, a female passenger. The cargo proved too difficult to salvage in the vessel’s exposed condition and was largely written off. The manifest of goods in the LOCH ARD’s holds included “Fittings gas (4 cases)”. The gas lighting of streets, public buildings, and the dwellings of wealthier private citizens was already well-advanced in the cities and major towns of the Australian colonies. In 1841 Sydney was the first to be gas-lit with 23 street lamps, 106 hotel lamps, and 200 private residences connected to the Darlinghurst “gasometer” by an underground network of metal pipes. “The dim days of oil and tallow are gone by!” pronounced one newspaper, flushed with civic pride. The 1850s Gold Rush promoted a similar attitude of confidence and affluence in the Colony of Victoria. In 1855 Melbourne was connected to its own system of subterranean gas pipes despite the same high rates of 25 shillings per 1000 cubic feet being charged, (reduced to 15 shillings in 1865 with cheaper sources of coal). By1858 Kyneton had its own gasworks to light the town (fuelled by eucalyptus leaves) and Geelong followed suit in 1860. Had the LOCH ARD reached its intended destination in 1878, it is probable that the 4 cases of brass gas light fittings on board would have found a ready market.The LOCH ARD shipwreck is of State significance — Victorian Heritage Register S417. The gas light bracket is an example of lamp fittings and plumbing from the late 19th century.A pressed brass lighting bracket recovered from the wreck of the LOCH ARD. It would be used for attaching, but simultaneously offsetting, a gas nozzle to a wall. Highly decorative in an unusually ‘modern’ or ‘art-deco’ style, with sweeping curves dissected by angular geometric pattern, and supporting a short, vertical bar with a gas nozzle on top. It is constructed of light gauge metal, with splitting along seams, and some delicate tracery is missing. Outer surface has been polished, removing sediment, but greenish oxidation remains in dents and joins. warrnambool, shipwreck coast, flagstaff hill, shipwrecked coast, flagstaff hill maritime village, flagstaff hill maritime museum, shipwreck artefact, maritime museum, gas lamps, gas lighting, gas works, brass fittings, gas pipes, loch ard, 1878 shipwreck, victorian affluence, colonial gas lighting

Victorian Institute of Occupational Safety and Health (VIOSH) Australia is the Asia-Pacific centre for teaching and research in occupational health and safety (OHS) and is known as one of Australia's leaders on the field. VIOSH has a global reputation for its innovative approach within the field of OHS management. VIOSH had its first intake of students in 1979. At that time the Institution was known as the Ballarat College of Advanced Education. In 1990 it became known as Ballarat University College, then in 1994 as University of Ballarat. It was 2014 that it became Federation University. VIOSH Australia students are safety managers, senior advisors and experienced OHS professionals. They come from all over Australia and industry. Students are taught active research and enquiry; rather than textbook learning and a one-size fits all approach. VIOSH accepts people into the Graduate Diploma of Occupational Hazard Management who have no undergraduate degree - on the basis of extensive work experience and knowledge. Letter was sent to students of the 5th Intake and 6th Intake. It enclosed a list of approved dissertation topics for the 5th Intake showing internal and external supervisors known.Two A4 sheets - typed. Ballarat College of Advanced Education letterheadDate D J Wooley - Dean of Engineeringviosh, victorian institute of occupational safety and health, derek woolley, ballarat college of advanced education, dissertation topics, external supervisors, internal supervisors

This transformer lamp system, which has a dial to transform 240 volts to a minimum of 32 volts was used by electrical technicians to inspect internal parts of the large generators (even in small confined spaces). The reason for the reduction of the 240 volts to the 32 volts was for the safety of the inspector. The SEC Victoria Hydro Scheme's electrical generators are powered by the hydro force of "stored" water at a higher altitude. The establishment of both the NSW and Victorian Hydro schemes was achieved from the mid 1900's to the 1960's. At this the point in time the need for additional power sources to quench both an industrial and domestic demand for electricity was purely an economic and not and environmental (carbon reduction) factor. This hydro scheme was instigated by "the Government of the day" as a bold move and was the major force of the World War II refugee and "technical" workforce inclusion of skilled and unskilled migration into the Australian environment. Although this mass "invasion" of workers with families was thought of in some circles as intrusive, the expansion of population post war years and its integration into the Australian rural sector, produced the multi- lingual multi-cultural diversity of later years.This transformer lamp is very significant to the Kiewa Valley as it was introduced as a very small part of the explosion of human resources into the valley. This influx of population transformed the region from that of a basically quiet rural region to one which evolved into both industrial and larger residential community. This evolution in the valley created a change, not only in the "physical" landscape but also the socio-economic expansion which permitted other "tourist" based industries into the valley. This is also a specific electronic item which was manufactured in Melbourne and not sourced from Europe or Asia. This demonstrates the fast evolution of Australian technology to a high standard compatible to that of the rest of the world.This heavy hand held electrical transformer (transforms 240 volts to 32 Volts) an has one leather handle on the top with three small (gauze filtered) air holes. It also has two 2 pin directional cable distribution (clipsal) in/out points 10amps / 240 volts. There is one glassed in volts/ac meter and one variable switch (180 to 150 voltage in settings of 10 volt increments.There are two vents (one on each of the smaller sides). There is also one three pin electrical lead coming out from the top.On one side is a manufacturer's plaque with "ELECTRONIC A & R EQUIPMENT MELBOURNE" and underneath "TYPE 1719, PRI V. 180 250" underneath "V.A. 1250" underneath "CYC 50" underneath "SEC V. 115" underneath "SEC A. 10 . 8". The label on topside "CAUTION SET SWITCH TO 250 v BEFORE CONNECTING TO MAINS THEN, WITH EQUIPMENT OPERATING, SET METER TO RED LINE.kiewa hydro electricity scheme, victorian state electricity commission, transformers

Portable Compound Engine - Marshall & Son's. Builders Number 48317 Built by Marshall Sons & Co., Ltd., Gainsborough, England (Builder’s Number 48317 of approximately 1908/1909), to the order of Robison Brothers, Engineers, South Melbourne. It was used for operating a pump to supply irrigation water at Robinvale in Northern Victoria. Robison Bros & Co. P/L was founded by James McFarlane Robison and his brothers in 1854, initially as plumbers and coppersmiths, the firm expanded into general engineering, boiler-making and brass, iron and steel founders and became one of Melbourne's most important engineering firms. They constructed railway bridges, gold mining equipment, railway locomotives, pumping stations, brewing vessels, abattoir machinery, amongst much else and including the first turnstiles at the Melbourne Cricket Ground. A portable engine is either a steam engine or an internal combustion engine, that remains in one place while operating (providing power to machinery), and can be easily moved from one work site to another. Mounted on wheels or sometimes skids, it is required to be towed between work sites.Historic - Industrial Portable Compound Engine - steam engine - Marshall & Son's. Marshall & Son's Portable Compound Engine - Builders Number 48317 made of steel Marshall & Son's. Builders Number 48317puffing billy, state rivers and water supply commission of victoria, portable compound engine - marshall & son's., portable compound engine, marshall sons & co., ltd., robison bros & co. p/l

Letter dated 10 March 1943 to the Melbourne and Metropolitan Board of Works about the retention of an internal water closet at 1267 Burke Road, Kew (Holmbush). Legacy accepted responsibility for any trouble which may arise through this fitting which was not directly supplied from a Storage Tank. Holmbush was the first hostel for children that Legacy started and operated from April 1943. It was later renamed Blamey House after another hostel called Blamey House was closed. Melbourne Legacy ran three residences: Blamey House (purchased 1947) , Stanhope (purchased 1945) and Harelands (purchased 1950), to take care of children whose fathers were servicemen, and who may have been left orphans, or whose mother may have been unable to care for them herself. Harelands accommodated boys and girls under the age of 14, Blamey House looked after boys over 14, and Stanhope looked after girls over 14. The children were cared for until they were old enough to become independent.A record of written correspondence in 1943 especially concerning consulting the MMBW about sewer connections.File copy of a letter to MMBW about a WC at Holmbush on white quarto copy paper, with black type, two hole punched.Initialled in ink, possibly EB.residences, holmbush, holmbush administration