Possibly used to hold molasses, as it has traces of the scent of molassesJug shaped canister with loop handle, conical shaped top with cylindrical lid and body traces of black paint on surface. Large dent in side of canister, surface rust, paint peeling.

Rectangular chart made from glossy paper with colour printing. The chart is mounted at either end on black metal strips. The strip on the upper edge has a loop used for hanging the chart.The word 'BRAIN' is hand written on the reverse of the chart in black texter pen.merck, merck sharpe and dohme, human brain, medical chart

Yields information about the storage of trams at the City Loop on the last day of operation of the SEC tram system. Has a strong association with the SEC Sales department of the mid 1970's.Copy slide - white / black plastic mount of four bogie trams in the City Loop, c1971. Leading tram No. 37 - last day of operations. Prepared by BTPS Sales - photographer not given.Has written on the slide - "BTPS Sales" and "19/9/1971"tramways, trams, closure, city loop, grenville st, sturt st, tram 37

Yields information about the use of the appearance of Gardens loop and tram 21 during the 1950's.Black and white photograph of Ballarat tram 21 at Gardens Loop with the terminus signage in the background. The tram has the destination of Mt Pleasant. Photo by Charles Craig possibly late 1950's. trams, tramways, gardens loop, wendouree parade, tram 21

Yields information about the condition of Wendouree Parade in the Gardens during the last 12 months of operations.Colour slide - 35mm - of Ballarat No. 13 south bound to Mt Pleasant in Wendouree Parade, just past the old Gardens crossing loop. Photo by Chas Bevan 19-12-1970"Ballarat trams (bogies) at depot 19-12-70" in ink.tramways, trams, wendouree parade, gardens loop, tram 13

Yields information about the appearance of the Gardens Loop area in the early 1960's.Black and white photograph of the Ballarat No. 37 about to enter the Gardens Loop. Tram has the destination of Mt Pleasant. Printed on Agfa Gevaert paper in a postcard format. Photo by Lloyd Rogers.In pencil "ex HTT car Ballarat (Gardens) June 1961" and in ink "12/4/61"trams, tramways, gardens loop, tram 37

Yields information about Ballarat No. 14 parked in the city loop during the early 1960's.Negative and Digital images of the Wal Jack Ballarat Negative file of No. 14 in the City Loop. In the background is the Hartley Sports Centre and the Ballaarat Gas Co. buildings. Photo early 1960's.trams, tramways, sturt st, city loop, tram 14

Photo shows the tram prior to fitting of hazard lights and striping.Yields information about Ballarat tram No. 13 and the locationBlack and White photograph of SEC Ballarat tram No. 13 at Gardens Loop, Wendouree Parade 12/4/1958. Photo shows the timetable boards located at this location. Photo by Keith KingsOn rear has the photographers file number A(h)(12)ballarat, wendouree parade, gardens loop, tram 13, trams, tramways

View of east end of Sturt St. looking from intersection of Grenville St. looking up the hill on the buildings on the south side. Two trams in the City Loop, 04-03-1963.'Ballarat 4-3-63, Sturt Sttramways, trams, sturt st., grenville st, city loop

Copy photographs . Photograph, Black and White of MMTB tram F46 about to pass under the railway bridge at Caulfield. Photo is very poor copy. Has the Caulfield loop junction in the foreground.In ink on the rear: " Melbourne Probably F46, under railway bridge at Caulfield, About 1920." Has KSK number LWR5 and ADV322trams, tramways, f class, pmtt, bridges, caulfield, tram 46

Black and white photograph of Ballarat trams 35 and 34 standing alongside each other at the Grey St loop on the Sebastopol line with John Fitzsimmons holding some of the last tram mail from Sebastopol to Ballarat on 18/9/1971. Photo by Keith Kings. See item 2942 for a sample of the mail.Yields information about the Last Tram Mail to be carried in Ballarat.Black and white photograph with photographers notes on rear.See image 2trams, closure, last tram mail, tmsv, post office, last tram

Timetable board giving first and last trams, weekdays, Sat and Sun. To 'City' with mounting holes, lettered on one side only, reverse side painted black, located at Gardens Loop, via Sturt St. sign. Some over painting on sign of former service times. See SECV Timetables. Demonstrates a SECV timetable signs that were located at various points on the tram system,Sheet metal sign, black background, white letters, painted.ballarat trams, timetable boards, secv street furniture

Hardcover w/ Dust JacketDedication written inside front cover - "To Robin, 1971". Also, clipping dated 27/1/71 about Melbourne's Underground Rail Loop Authority citing the value of having Robin Boyd on the Authority.walsh st library

This legging is part of a pair of leggings which presumably would have been worn by a cavalry soldier in the Royal Australian Army to protect the lower legs when riding in armed conflict. This item most likely dates to the World War One era.As an article of WWI protective clothing for use in armed conflict by a cavalry soldier, this item is of historic value. Brown leather cylindrical shaped legging with two leather straps for fastening. One strap is attached to the lower edge of the interior. This crosses over the lower exterior and passes through a leather loop at the front, which is attached by four metallic nails. The strap then wraps around the gaiter and passes through a second leather loop at the front, which is also attached by four corroded metallic nails. This strap (along with a shorter strap that is sewn and nailed into the top of the legging) pass through two buckles at the top. Both buckles are made of brass. The straps then tuck under four final leather loops, two of which are bolted to the legging with three corroded nails. Top of legging also carries a small brass hook.legging, gaiter, first world war, world war one, world war 1, wwi, ww1, war, army, uniform, royal australian army, the great war

Photocopy of a drawing prepared by Dave Macartney in the mid 1980's of the track layout of the Electric Supply Co. of Victoria's Ballarat Tramway system, excluding the single track to Sebastopol. Plan shows the location of the loops, loop type, street names, position of replacement loops installed by the SEC during the reconstruction, depot layout, powerhouse siding and railway in Lydiard St. North. Prepared from inspecting the Plans of Ballarat services drawings in the Ballarat Water Board's Offices. Drawn on the back of old import forms of a light weight paper and has shown through the printing underneath. Titled "Ballarat Tramways Company Days 1905 - 1930" Number of small differences to the map drawn for Keith Kings, "The Ballarat Tramways" book, page 22.trams, tramways, ballarat, esco, track layout, map

Station Sign - Emerald Emerald Station is situated on the Puffing Billy Railway in Victoria, Australia. It was opened with the Railway on 18 December 1900 and comprised a platform track and a loop siding. A passing loop was added between the two a few years later. There was also a spur siding off the Down end of No. 3 Road. Two standard 12 ft by 20 ft timber portable station buildings with a Van Goods Shed between (all adjoining) were provided on the platform and a Goods Shed on the No. 3 Road loop siding. Other buildings included Tea Rooms, lamp room and toilets along with a cattle race and loading bank. The station building was later reduced in length by one of the portables which housed the General and Ladies' waiting rooms. Emerald today remains very similar to the early days, but has had other Roads added into a Carriage Workshops, a turntable and storage sidings. Also, a Signal and Telegraph Branch depot in the form of a large Goods Shed and a multi-purpose yard building in the form of a Locomotive Depot administration building have been added. During 2009, the station building underwent stage one of an internal restoration to its former glory. ref: https://en.wikipedia.org/wiki/Emerald_railway_station,_Victoria photos at http://www.vicrailstations.com/Gembrook/Emerald/Emerald.html Historic - Victorian Railways Station sign used at Emerald Station Station Sign - Emerald Metal rectangle Station Name Sign with white enamel back ground and black lettersEmeraldstation sign, puffing billy, emerald station

1. Blue drill cotton polyester skirt. It has belt loops at the waist. It has a side zip held shut with one button -colour deep blue. 2. & 3. Blue cotton/polyester skirts. They have belt loops with an installed belt. The belt has a silver chromed buckle. It has a side zip held shut with one black plastic button. It has a sewn in lining/petticoat. It has two pleats either side of the zip.3. Written on label, “W.326143. B. Williams”raaf cadet uniform, skirts, female uniform

Order of Australia Medal.This is full scale replica of an OAM It has a circular blue enamel ring in the centre. The word "Australia" is in the blue ring. The large gold section has a large quantity of replica gems. The top of the gold medal is a crown set with red and white enamel. A ring is above the crown. Attached to the ring is a brass loop 30mm long. Through the loop is a small piece of blue ribbon with gold wattle flowers printed on it. The medal is pinned to a piece of green cardboard.order of australia reproduction, aust awards

This medical instrument was used in the Tawonga District General Hospital which was built in the 1950s specifically for the increase in population due to the Kiewa Hydro Scheme. Used for sucking fluids during an operation. The sterilised pack is an old way of sterilising instruments.Historical: Shows the development of scientific hospital equipment. Provenance: Used in the Tawonga District General Hospital which was remote and therefore required good equipment. Good condition and good interpretation capacity.In sterilised bag. 3 metal instruments. 1. long and curved with holes at one end and hollow at the other. Near the hollow end the instrument breaks into 3 and rejoins further along. 2. An elongated "S" like metal instrument with an elongated hollow at one end and hollow at the other end where there is a small loop 3. A straight instrument except for close to one end where there is a hollow. At the other end it is hollow with a small loop near the end.medical instrument. hospital instrument. doctor. nurse. mt beauty. tawonga. yanckeur. operation. sterilise pack

This Gunter’s Chain, an old land surveying instrument, is named after its inventor, Edmund Gunter (1581-1626), an English mathematician and astronomer. It was first produced in 1620. The tool has 100 links and is 66 feet or one chain long. The links are marked off in groups of ten by metal rings or tags. A quarter chain (25 links) is called a rod or pole and ten chains make a furlong and 80 chains make a mile. The traditional cricket pitch is 22 yards or one chain long. This Gunter’s Chain is of considerable significance because: 1. It is an early land measuring tool that was used for over 250 years and has great historical and mathematical significance. A Gunter’s Chain would have been used when forming and building local roads from the earliest days of settlement. 2. It has a possible local connection as it was given to the Historical Society by a local person in 1965 and possibly came from the property of ‘Rosehill’ This is a metal tool which consists of 100 metal pieces or links joined together by loops at each end with two metal loops in between each link. The links joined together form a chain. The two ends of the chain have small metal handles attached At intervals along the chain there are additional rings or metal pieces attached. Some white and green rope material has been used to bundle up the chain. The metal is somewhat rusted. gunter’s chain, land measurement tools, history of warrnambool

These machete's were issued to military personnel posted in jungle like conditions.The machete would have been used by military personnel during WW2 and during the 1950s.Steel blade machete with wooden double sided handle. The handle is attached to the wood with four steel rods. There is an olive green scabbard made of cotton material oil impregnated. The scabbard has a pocket on the front to hold a sharpening stone and has steel on the top opening to keep the opening firm, there is a steel catch for attachment to webbing and a cloth loop with press stud to hold the handle of the machete in place when in the scabbard. There is a cotton fabric loop through the handle.On the handle of the machete MA67. The item number on the scabbard is not readable.army, military, machete.

Clothing. A textured weave, cotton bow, with two rectangular shapes - 9.5 cm x 6.0 cms, with a one cm loop at the centre, attached to a folded double cotton band, 2 cm x 34 cm long, which would fit under the collar of the Lodge shirt. A 1.5 cm diameter silver coloured metal loop at one end of the band, and a silver coloured hook at the opposite end of the band, would fasten the tie in position.costume, male, white cotton bow tie-lodge regalia

These trousers, along with the rest of the dress uniform, belonged to an individual named H.E. Schulze. It is believed to have been dropped off to the RSL, so no additional information is known.This uniform serves as an example of the military dress worn by the Royal Australian Army (Royal Australian Artillery Regiment) during the late sixties.Khaki trousers with pleats and a series of belt loops at the waist; two front pockets; and three buttons positioned at the left, right, and centre of the back of the trousers (for attaching a jacket to the trousers). There is a large tear in the seat.lara, rsl, royal australian army, royal australian artillery, war

The badge was worn by YMCA representatives while on service supporting the Australian Army.Badge rectangular shape, metal for with stretched white material over sewn at back, rear has a pin and loop for clothing attachment, the lettering in red “YMCA” is sewn onto the white material background.badges, accessory’s, ymca

DCPU is a five colour camouflage pattern developed by the Australian Defence Force and tested during Auscamthe late 1970s. DCPU has been replaced in the Australian Army by Australian Multicam Camouflage Uniform (AMCU) Soft round 'giggle' hat with 6 cm stitched brim. Fabric loops for inserting Camouflage materials. Fabric is Disruptive Pattern Camouflage Uniform (DCPU) nicknamed Auscam or Jelly Bean Camo. JOHN STAR P/L NSW 02 9669 1066 SIZE: 60CM 100% COTTONauscam cammo, uniform, australian armed forces

The Samuel Browne belt is named after Sir Samuel James Browne VC. In 1858, Browne lost his left arm in battle (as a result of a sword cut) and as the dress regulations of his regiment required officers to wear their waist belts under their tunics, Browne found this ungainly and devised an external belt supported on the left-hand (sword) side by a shoulder strap. The belt had two shoulder straps when a holster was worn. In the Australian Army, a brown leather version is worn on ceremonial occasions by officers and Warrant Officers Class One of all corps, except those who wear silver dress embellishments (Armoured, Aviation and Nursing Corps). These members wear a black Sam Browne belt. Wide brown pattern stitched brown leather belt with adustable shoulder strap, brass buckle and brass loop fittings (4 at the top and 2 at the bottom) attached to the belt by stitched leather straps.Nonesam browne, belt, clothing

this pocket knife is imoportant because it was used by AB Bloggs (Navy Medal) to splice lines on the HMAS Vampire. Donated by daughter Louise. AB Bloggs died from wounds received during sea battle in April 1942 in the South Pacific. He was awarded the Navy Medal for bravery.This item is significant because it is a remaining item of an award winning navy man who gave his life for his country.metal pocket knife: ( multitool - knife, bottle opener,screwdriver, and skewer), in black leather embossed case with belt loop and press close stud and plaited carry cord on pocket knife handle."U S"embossed, knife, leather, metal, south, pocket knife, pacific, multi tool, bottle opener, screwdriver, skewer, belt loop, louise

The load of heavy beach apparatus life saving equipment was held in place on the beach cart by the hand worked rope net cover. It would be stored in the Rocket House packed and ready to use for practice or rescue. Beach apparatus equipment - In the mid-1800s the equipment could include a line throwing set, coiled line in wooden carrying case, rockets, cartridges, breeches buoy, hawser and traveller block, line-throwing pistol, beach cart, hand barrow, sand anchor, crotch pole, and tools such as spade, pick, mallet and hawser cutter. Around the 1860s Warrnambool had a Rocket House installed beside the Harbour. Saving lives in Warrnambool – The coastline of South West Victoria is the site of over 600 shipwrecks and many lost lives; even in Warrnambool’s Lady Bay there were around 16 known shipwrecks between 1850 and 1905, with eight lives lost. Victoria’s Government responded to the need for lifesaving equipment and, in 1858, the provision of rocket and mortar apparatus was approved for the lifeboat stations. In 1859 the first Government-built lifeboat arrived at Warrnambool Harbour and a shed was soon built for it on the Tramway Jetty, followed by a rocket house in 1864 to safely store the rocket rescue equipment. In 1878 the buildings were moved to the Breakwater (constructed from 1874-1890), and in 1910 the new Lifeboat Warrnambool arrived with its ‘self-righting’ design. For almost a hundred years the lifesaving and rescue crews, mostly local volunteers, trained regularly to rehearse and maintain their rescue skills. They were summoned when needed by alarms, gunshots, ringing bells and foghorns. In July 1873 a brass bell was erected at Flagstaff Hill specifically to call the rescue crew upon news of a shipwreck. Some crew members became local heroes but all served an important role. Rocket apparatus was used as recently as the 1950s. This cover was used with the beach cart. The cart is significant for its connection with local history, maritime history and marine technology. Lifesaving has been an important part of the services performed from Warrnambool's very early days, supported by State and Local Government, and based on the methods and experience of Great Britain. Hundreds of shipwrecks along the coast are evidence of the rough weather and rugged coastline. Ordinary citizens, the Harbour employees, and the volunteer boat and rescue crew, saved lives in adverse circumstances. Some were recognised as heroes, others went unrecognised. In Lady Bay, Warrnambool, there were around 16 known shipwrecks between 1850 and 1905. Many lives were saved but tragically, eight lives were lost.Rectangular rope cover, hand worked for the purpose of covering the beach cart. The cover is made from heavy rope in a pattern that looks similar to crochet. A loop has been worked into each corner.flagstaff hill, warrnambool, maritime village, maritime museum, shipwreck coast, great ocean road, flagstaff hill maritime museum and village, lady bay, warrnambool harbour, port of warrnambool, shipwreck, life-saving, lifesaving, rescue crew, rescue, rocket rescue, rocket crew, beach rescue, rescue equipment, rocket rescue equipment, marine technology, lifeboat, volunteer lifesavers, volunteer crew, lifesaving rescue crew, rocket apparatus, stranded vessel, rocket rescue apparatus, beach apparatus, life jacket, rocket shed, rocket line, beach rescue set, rocket set, beach cart, hand barrow, welsh hand barrow, harbour board, government of victoria, harbour master, l.s.r.c., lsrc, rocket house