Showing 4749 items matching "modelling"
-
Waverley RSL Sub Branch
Ashtray - Lightning Aircraft, Cpl.Jack Neilson
Made by Cpl. Jack Neilson 7th Division Papua New Guinea 1943Shows how many of our defence personnel "unwound" from the stress of war by creating a useful and or decorative item from the waste products of war. The creative aspect was important in a time where their lives were governed mainly by destruction. By creating such things they were partially able to restore their own humanity. This restored item shows the skill that some had, and the Aussie way of using whatever came to hand..Brass ashtray showing Lightning aircraft model made from cartridges and shell casetrench art, lightning aircraft, ash tray -
Flagstaff Hill Maritime Museum and Village
Carpet sweeper
Carpet sweeper 'Minometer' brand, Hathaway Prince model. Made by Hathaway Bros Englandflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Phillip Island and District Historical Society Inc.
Transparencies, 1990's
8 slides in good condition but of a size not currently in use.8 Transparencies of a Model of a Chicory Kiln made by Robert Titcher and currently housed in the Museum.local history, photography, photographs, slides, film, buildings, historic, early slides, chicory kilns, phillip island -
Glenelg Shire Council Cultural Collection
Document - Document - Chart specifications Osgood model 1000, n.d
Port of Portland Authority Archivesport of portland archives -
Federation University Historical Collection
Scientific Instrument, Boxed Balance
Boxed 250 gram balance - Microidchandial Model, registered number 830303. 250 gram.balance, scientific instrument, microidchandial, griffin and tatlock ltd -
Glenelg Shire Council Cultural Collection
Photograph, n.d
Port of Portland Authority Archivesport of portland -
Running Rabbits Military Museum operated by the Upwey Belgrave RSL Sub Branch
Bayonet & Scabbard
Italian Model 1871/87 bayonet for Vetterli service rifle. Serial number KO9981weapon, 1930's, army -
National Vietnam Veterans Museum (NVVM)
Model - Model, tank
An olive green model tank with the number 5124 on the side turret. This is possibily an Russian tank.'5124' on gun turrettank, model -
National Vietnam Veterans Museum (NVVM)
Model, UH-2 Huey
Model of UH-2 Huey helicopter mounted on plinth in protected sand bagged area34model, helicopter, uh-2 huey -
National Vietnam Veterans Museum (NVVM)
Model, F-111 bomber
Model of F-111 bomber with a pilot - wings in straight out configuration. Camouflage paintA8-127model, aircraft, f-111 -
National Vietnam Veterans Museum (NVVM)
Model, C-130 Hercules
Model of Lockheed C-130 Hercules transport aircraft, camoflage painted with black nose06 Royal Australian Air Forcemodel, aircraft, c-130, hercules -
The Ed Muirhead Physics Museum
Vertex V170 Hard Drive, 20th Century
Computer hard drive with exposed power board, circuits and interfaces. Model V.170.Label on back: 'VERTEX PERIPHERALS / MILPITAS, CA. USA / WARNING / HANDLING PROCEDURE'vertex, hard drive, v 170, computer peripherals, computer equipment, hardware, california -
The Ed Muirhead Physics Museum
Canonet QL17 Camera, c 1965
Business card belonging to Betty Laby inside.Cannot QL17 model camera. Silver and black compact rangefinder with associated storage case. -
National Vietnam Veterans Museum (NVVM)
Model, HMAS Perth D38
A model of HMAS Perth and Guided Missile Destroyer D38 built to scale in a glass cover.hmas perth, model, cerberus collection -
National Wool Museum
Machine - French Comb, Schlumberger & Cie, 1964
Combing removes the short or broken fibres and draws out the long fibres into even strands suitable for spinning. The process is necessary to produce long and soft strands needed for worsted yarn. These machines remove the short fibres and blend the remaining long fibres together to form the top. The short fibres that are removed, known as the noil, are used in the woollen system. The long fibres are drawn together, ready for spinning. To retain as many of the valuable long fibres as possible, a skilled operator always needed to be on duty in the factory to precisely set the machine. Machine has been completely rebuilt and set up by Nick Sokolov of Comb Research and Development with the help of Bruce Hill and others. NSC Schlumberger Comb PB25L machine No 3953, year of manufacture 1964. A rectilinear version of the Noble Comb, this machine separated long and short fibres. Donated to the National Wool Museum by Port Phillip Wool Processing Pty Ltd in 1993.French comb machine. 1962 Shlumberger and Co, France Model PB 251 NO. 3953.french comb, wool processing, textile industry, factory, machine, comb, restoration, fibres -
Whitehorse Historical Society Inc.
Article, Aristocratic scion carves bullock wagons, 30/10/1967 12:00:00 AM
Article on Derek Pitman, Blackburn resident, who carves models of early Australian transport.Article on Derek Pitman, Blackburn resident, who carves models of early Australian transport.Article on Derek Pitman, Blackburn resident, who carves models of early Australian transport.eustace street, blackburn, pitman, derek, models -
Whitehorse Historical Society Inc.
Photograph, Main Bedroom - Schwerkolt Cottage
Coloured photograph of main bedroom of Schwerkolt Cottage showing model in corner and part of cradle.schwerkolt cottage & museum complex, nunawading & district historical society -
Dandenong/Cranbourne RSL Sub Branch
Safety razor with metal container, Approximately 1914
Possibly WWI historical significance.American model safety razor. Made in Germany possibly from 1914 with metal container.Safety Razor, Warranted, Made in Germany. Safety razor printed on metal container -
Queenscliffe Maritime Museum
Machine - Inboard Motor
Four cylinder Kelvin, model E4 petrol / paraffin, 30 HP inboard motor -
Tennis Australia
Racquet, Circa 1963
A Fleetwood 'Professional' model with no net. Materials: Wood, String, Adhesive tape, Paint, Leathertennis -
Moorabbin Air Museum
Equipment (item) - Parachute Ejector Seat Sea Venom/Vampire
-
Lakes Entrance Historical Society
Photograph - Betka Beach Ritual, Steve Wadsworth, Mallacoota Victoria, 1997
Colour photograph of model zebras in lake during Betka Beach Ritual Mallacoota Victoriafestival, celebrations -
Ringwood RSL Sub-Branch
Edged Weapon Bayonet, C WW1
German Mauser Bayonet model 98/05 WW1 issue ribbed wooden handleSIMSON & CO SJHL W15 on spine -
Glenelg Shire Council Cultural Collection
Photograph - Photograph - Model Breakwater, Model Parapet Wall, n.d
Port of Portland Authority Archivesport of portland archives, model breakwater -
Glenelg Shire Council Cultural Collection
Photograph, n.d
Port of Portland Authority Archivesport of portland archives, model breakwater -
NMIT (Northern Melbourne Institute of TAFE)
Photograph: CTS 1941 Model Aircraft made by teachers for training armed forces
Black and white photograph of a table of model aircraft and Collingwood Technical School teachers who donated one week in December 1941 to make aircraft models to be used to train ared services personnel in aircraft identification. (Scott p.46)collingwood technical school, armed forces training, nmit -
Whitehorse Historical Society Inc.
Domestic object - Mannequin -Child, c1900
Used by Whitehorse Historical Society. Origin unknownSmall child size mannequin on wooden stand. The model is without arms and torso size. It is covered in black cotton and black linen like material above the waist. The model is on a fixed stand with carved wooden pieces at arm holes and at the neck.model making, mannequins/dummies -
Flagstaff Hill Maritime Museum and Village
Craft - Ship Model, S.S. Orotava
This is a ship model of the SS Orotava, a British Screw Steamship built at Barrow-in-Furness, county of Lancashire, by the Naval Construction and Armaments Company (NC & A Co.) in 1889. Her gross tonnage was 5552.10 tons, length 430 feet, breadth 49.3 feet and depth 34.2 feet. She was built for Pacific Steam Navigation Company (of 31, James Street, Liverpool) and used as a passenger liner. She was launched 1889 and made 2 voyages for the Pacific Steam Navigation Company in 1889. Then under her new management of the Orient Line, she made her first sailing 6th June 1890 from Liverpool to Australia via Suez. During the Boer War (1889 – 1903) she served as a troop ship but apart from this she remained in the Orient Line’s Australia service until 1906. On 14th December 1896 the Orotava sunk at Trilbury Docks after being serviced on her return from Australia, becoming unstable and taking in water. Five men lost their lives. The ship was then raised to dry dock and repaired for service again and an investigation launched into the cause of the sinking. Between 1901 – 1906 the name ‘Orient-Pacific Steam Line’ was used due to the close ties between the Pacific and the Orient lines. In 1906 the Pacific Steam Line Australian service was taken over by the Royal Mail Steam Packet Co. and the alliance between them and the Orient Line was dissolved in 1909. Orotava was then used in the West Indies service of the Royal Mail Line In World War 1 (Dec 1914 – June 1916) she served as HMS OROTAVA, an armed merchant cruiser. She was broken up in 1919. Ship model of SS Orotava, 4 masts, 2 funnels, British passenger liner, launched in 1889.No case. Mounted on timber base. (some rigging broken, lifeboat now a separate piece)."OROTAVA" painted in white on each side of the bow. 'OROTAVA / LONDON" painted in white on the stern.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, ship model, ss orotava, naval construction and armaments co., n c & a co., pacific steam navigaiton company, passenger liner, orient line, orient-pacific steam line, royal mail line, hms orotava -
Glenelg Shire Council Cultural Collection
Sculpture - Model Ship, Bryan Tink of Geelong, "Ariel", 1998
Model of a traditional couta boat "Ariel" Made of cedar, plywood and balsa. Sails of calico, riggings fine cord. Model is lug rigged. Deck is varnished, combing painted. Copper strip on edge of combing near stern. Hull painted black with fine white stripe. Lower section red. ""Ariel C23" painted on stern in white. Model sits on varnished wooden stand with brass plaque.Front: Plaque :- Couta Boat "ARIEL" Built by J.A. Jones Melbourne in 1927 approx scale -7/8"= 1 foot Lug Rigged -
Tennis Australia
Racquet, Circa 1918
A Wright and Ditson 'DC Model' (i.e. Davis Cup Model) tennis racquet, with: concave throat; bevelled crown; string whipping around shoulders; and, bald, thick octagonal handle. Decal inscription along throat on obverse: WRIGHT & DITSON/DC/MODEL. Wright & Ditson cursive logo features along throat on reverse. Materials: Wood, Lacquer, Glue, Metal, Paint, Ink, Leather, Gut, Stringtennis