Metal binding ground glass Metal tube with handle for a lidMade in England Never fill syphon above the red line C Size Shake Syphon well While Piercing Bulb Sparkletsir __kers London Sparklets

8482.1 - Tall metal cylinder with rusted metal handle and hook.

Variety of Metal Insignia.in a small plastic bag. Metal badges.badges

Amongst Kurth Kiln Cultral Heritage Artifacts assumed left after the Foresty Commission moved from Kurth Kiln to Kalista LowManufactured rusty metal cutting blades attached to metal handle No physical markingsshears

Large metal tankard with curved handle made of Brittania metaldomestic items, food & drink consumption

Round metal ring with metal studs and half ring attached.rural industry, agriculture

metal counter with eight metal tabs that fold down individuallysport, cricket, overs, counter

Metal ashtray with figurine of child holding a racquet. Materials: Metaltennis

Metal hanging frame with figurine of boy with racquet. Materials: Metaltennis

Small metal goblet with racquet motif stem. Materials: Metaltennis

Pair of silver metal bookends with tennis motif. Materials: Metaltennis

Part of a large donation of items once owned by members of the Christian and Washfold families in Kew. Henry Christian (c.1809-91) was one of the first settlers in Kew. He arrived in Victoria with his wife Agnes and son Orlando in 1855 on the Gypsy Queen. He established a rope-making business in Bulleen Road by 1858 but was declared insolvent two years later. In his final years, he was celebrated as one of the oldest living settlers of the district. His son, Orlando Henry Beater Christian (c.1853-1930) became a member of the Hawthorn Band and a foundation member of the Willsmere Swimming Club. Orlando and his wife Elizabeth had four children: Henry Beater (1886-1962), Ada Susannah May (1888-1962), Orlando Julius (1891-1917) and Lilian Adelaide ( -1956). Ada married George Herrick Washfold, and had four children.Metal rimmed optical glasses in a rigid metal and leather case.optical glasses, christian-washfold collection

Metal ticket printer, made from cast metal and Glass.Williamson Ticket Printer 3749ticket, print, tramways

Metal Listening or Hearing Aids, Metal holder and Celluloid earpieces stawell

Key that opened the gates to No. 20 shaft.Key on metal chain. Chain is attached to a large metal tag.on tag: 20 shaft gates. on key: R 62, Dalson (7V) Melb. Aust.

Tatrapoint Standard is a manual braille writer designed for use by individuals who are blind or have low vision. It is manufactured in the Slovakian republic. This mechanical, six-key brailler uses normal braille paper on a roll. It has a robust design, and is quiet, safe, and easy to operate. Features include adjustable left and right margins, a bell that rings five cells before the end of the line, carriage release and backspace keys, and built-in Dymo tape clips for embossing dymo tape. Precise paper transport allows exact readjustment for corrections in previously written text.Blue metal body with 7 keys and silver metal scrollbraille equipment, assistive devices

Used in agriculture to identify location of stock ca 1910Metal cow bell, we believe was imported by HOLDEN and FROST ca1910 Small rectangular bell , metal clanger, metal holder on topagriculture, stock bell, c1910

5 clips each containing 5 Inert 303 rounds - total of 25 Five metal clips each containing five metal rounds303 drill rounds, ammunition

Donated to collection. Used in 1950s as hot water bottle to warm bed in cold Western District homes.Household object in 1950sSilver plated metal cylinder with metal screw top stopperPAT APPN 6368/42 Sunrise stainless steel Melbournecan, water bottle, hot water bottle, stainless steel, bed warmer

Two rod type rifle grenades bought back from WWI by Sgt Major Albert James. Originally designed to be jammed into enemy tank tracks.The rod-type rifle grenade is a standard hand grenade with a metallic rod attached to the base. They were developed prior to World War One. Metal Rifle Launch Grenade at end of long metal rod.Hope /18 (written on the side of one)world war one, ww1, grenade, rifle grenade, rod type

8675.1 - Wooden cabinet with four draws that have metal handles. 8675.2 - Wooden draw with metal handle. 8675.3 - Wooden draw with metal handle. 8675.4 - Wooden draw with metal handle missing/broken. 8675.5 - Wooden draw with metal handle.

The early settlers of Victoria depended on horse drawn vehicles to farm, make roads and railways, deliver produce and transport people. Horse harnesses were an important requisite for all drivers and could be found wherever there were working horses. Horse Harnesses have played an essential role in different cultures throughout history. Simple, utilitarian horse harnesses made of leather straps and iron rings were being used in early China before AD 500 as well as ancient Greece and Rome allowing horses to pull chariots and ploughs. The Greeks and Romans were the first to use a "horse collar" which distributed the weight of the harness evenly across the horse's chest rather than relying on a "throat harness" that could damage a horse's throat or choke them. During the medieval period, European horse harnesses became more elaborate and decorative. Variations of different horse harnesses were also found in Native American and Middle Eastern cultures. Horse Harnesses usually have four basic components which include - 1. Communication - the bridle, bit and reins allows the driver to communicate instructions and commands to the horse, guiding its movement and direction. 2. Draft - the collar, hame straps, hames, traces and chains enables the horse to draw and pull the load efficiently by distributing the weight and transferring the pulling force to the vehicle. 3. Stopping - the breeching band, pole straps and breast strap helps to control or stabilise the horse and vehicle when moving downhill or stopping. 4. Support - the back pad, backband, belly band and back saddle keep the harness in the correct position and proper alignment. This dray harness is a plain, basic harness and reflects its working class origins. It was used by Mr. Oswald (Jack) Bourke with his horse and dray to firstly deliver drygoods from Sunbury to Melbourne in the 1930's and later (through the 1940's and 1950's up to 1961) when he worked on the garbage round for the Springvale City Council. This horse harness is a significant example of the equipment that was needed wherever horses were being used - particularly in the early years of Victoria's settlement by white settlers. Harnesses such as this example were used with drays, farming equipment, delivery carts and personal transportation.A leather and metal horse harness used with a horse and dray circa 1930's to the early 1960's. It is made up of a number of components. 1. A leather bridle with metal buckles and rings, blinkers and a metal single jointed, snaffle bit that has the initials M B stamped onto the leather. 2. A leather bridle with metal buckles and rings and a metal "straight bar" Eggbut snaffle bit. It has an elongated X design (with 4 dots) stamped onto the leather strap holders near each buckle. 3. A blue and white vinyl halter with one leather patched strap. The nose band and a chin strap are covered with woollen padding. 4. A pair of leather shaft protectors. They have lacing holes along each edge and a repeating design of small shapes (flowers, wings, crosses and arrowheads) which run along the front of each protector. 5. A leather strap with a stainless steel chain and catch and a maker's mark for "Glenn's Leather Goods, Pearcedale Victoria" stamped onto the end. 6. A wide leather strap covered with a webbing sleeve. It has two large metal rings and each end and one ring has a rope attached. 7. A leather strap comprised of three separate sections (two shorter and one longer) joined with two metal rings. The longer section has notches along its length and the shorter section at the other end has a buckle. It also had a maker's mark stamped on it but the mark is very worn and the writing is difficult to read. 8. An adjustable leather horse collar with two buckles and straps at the top opening and two "B's" stamped into the leather. The top of the collar is made from treated leather pieces stitched together and the underneath of the collar is untreated leather. It has a padded indentation running all the way around the collar for the hames to sit in. 9. Two pairs of long leather traces - each having a buckle and notched section at one end and each one is made with three lengths of leather spliced together. 10. A leather strap (with one spliced join) belonging to a horse harness with two shorter straps (each ending with a metal clip) attached to a steel D ring at one end. 11. Three assorted short leather straps - the top one has clips at each end and a buckle (for adjusting the length) in the centre, the middle strap has notches and a buckle and the bottom strap is white with notches and a buckle.Bridle with blinkers - "M B" Bridle - design showing an elongated X with a dot in each section stamped onto strap holder Shaft Protectors - stamped design of flowers, wings, crosses and arrowheads Strap with chain - "Glenn's leather goods / Pearcedale / Victoria" Leather Strap (with two metal rings) - Maker's stamp - "name indecipherable / SADDLER / ...OURNE" Collar - "B / B" Leather strap - flagstaff hill maritime museum and village, warrnambool, great ocean road, sunbury, springvale, dray, delivery dray, harness, horse harness, horse drawn vehicles, working horse, oswald (jack) bourke, bridle, horse collar, hames, shaft protectors

Metal firefighting knapsack.Fire fighting equipment

Metal drench funnel.sheep drenching, funnel

Clinometer- used for measuring the slope of the landMetalsurveying equipment

Wick BurnerMetal

"T" for Oxygen CylinderMetaloxygen, cylinder, ballarat

Pourer 15cc x 2Metalpourer, 15cc, ballarat

Umbilical ClampsMetal umbilical, clamps, ballarat