This building was constructed at Old Gippstown from materials at hand. It was named after the garage operated in Maffra by W.O. (Bill) Fulton, blacksmith, garage proprietor and later state member of parliament. A large rectangular-shaped corrugated iron shed, used as a Garage. It has a gabled roof made of corrugated iron. There is a billboard on the front of building's roof.motor garage, old gippstown, west gippsland, gippsland, gippsland heritage park, goldfields, coal mine, victorian era, moe, historical village, petrol station, w.o. (bill) fulton, old gippstown heritage park, latrobe valley, buick hearse, chevrolet tourer, hudson hearse, stanley steamer, plume texaco, shell, cor, petrol pump

Oval iron boiler with lid and handle, capacity four gallons (15 litres). Made by T. & C. Clark & Co., Wolverhampton, England. T. & C. Clark & Company Limited was founded in 1795 by Thomas and Charles Clark. Based at Shakespeare Foundry, Wolverhampton, it became one of the largest foundries in the area.These cooking pots were used by the local pioneers to cook their meals over an open fire. The flames from the fire turned the pots black.Oval iron boilers with lid and handle of various capacity : 2½ gallon, 3 gallon, 5 gallon and 6 gallon. Made by T. & C. Clark & Co., Wolverhampton, England. T. & C. Clark & Company Limited was founded in 1795 by Thomas and Charles Clark. Based at Shakespeare Foundry, Wolverhampton, it became one of the largest foundries in the area.T. and C. Clark with their makers markcooking, iron pots, moorabbin pioneers, cast iron, t & c clark & company

This was used by the Cameron family on their dairy farm at Orbost. The Cameron families were early farmers at Orbost and Marlo.This was used by the Cameron family on their dairy farm at Orbost. The Cameron families were early farmers at Orbost and Marlo.A rectangular shaped iron bell with a clapper inside. bell sheep-bell agriculture stock iron

Soldering iron small round and fine pointflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Container cylindrical sheet metal (iron) with lidflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

The origins of Fairway Scale and Tube Company are unclear, their catalogue from 1947 advertises the subject item as model "1055". We also known the company went into business with the Howe Scale Co of Rutland Vermont, USA in 1962 at the Braybrook premises in Melbourne Vic. At the present time that is all the information the writer has been able to source regards the items provenance other than the item was probably made around 1947-1950 given its listing in the company 1947 catalogue.The item is significant as it was part of Melbourne manufacturing history producing industrial and domestic style scales during the late 19th and early part of the 20th century.Fairway Platform Scales, Black cast ironEmbossed Fairway Scale Co Melbournewarrnambool, platform scales, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, platform scales, fairway scales, howe scales, industrial platform scale model 1055

Medium sized pickaxe head. Used for loosening the soil in digging, shaped like a mattock, but having both ends pointed. Iron pickaxe head, medium size, (no handle)pickaxes, tools

Usually heated over a stove, used for ironing shirt collars and similar garments, this flatiron has a curved or rounded base.Small black flat iron, rounded baseSilvester patent [No.] 1flatirons, laundry irons

This round was fired by the QF 1 pounder gun known as the Pom-pom because of its distinctive sound when firing. It was the world's first automatic cannon and was used by many different countries. It achieved notoriety when used by the Boers in the South African War 1899 - 1902.Brass case and iron pom-pom projectile.V S & M

Kettle sat on open fire or hob - probably used on wood stove before 1940's.This item is an example of a commonly used domestic item used in the early 20th century.Black iron kettle with long handle and spout. Bottom - underneath -No 3, Kenrick 6 PINTSkettle ironware domestic kitchen

Jib Iron, metal with hook & "U" shackle.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Turnbuckle iron with two ring link screwsflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Turnbuckle iron with two socket link screwsflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Branding iron metal with letters JF on baseflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, branding iron

Unpainted iron whell designed for heavy loadsfarm machinery, wheel, iron wheel

8703.1 - Black painted cast iron Protectograph.8703.1 - Operation of the Protectograph check writer.

Chrome plated electric iron with wooden handle.domestic equipment, laundering, iron

Large Forged Iron embossed belt buckle.B-24 LIBERATOR, 1939-1989, 50th ANNIVERSARY (on front) LIMITED EDITION 50th ANNIVERSARY ISSUE,B-24 LIBERATOR, 1989 BUCKLE CONNECTION, SERIAL 0612 OF 1939. B-24 LIBERATOR Origin: Consolidated Vultee Aircraft Co Type: Long-range bomber with normal crew of 10 History: First flight(xb 24) December 29 1939 Withdraw from service 1955-56 It was built in bigger numbers than any other American aircraft in history and served on every front in WW11 and with15 allied nations.

Used at the brickworks of Fritsch, Holzer & Company of Hawthorn to transport bricks and materials around the works. Fritsch Holzer Originally the company was known as the Upper Hawthorn Brick Company Ltd. It was started by brothers Johann, Martin and Anton Holzer and Gustav Augustus Fritsch. Fritsch had previously been a brick maker in Abbotsford, before moving to Hawthorn. Each had a brick works that operated next door to each other and the two works merged in 1883 to form the largest brick making company in Victoria. At its peak, they employed around eighty people and were making over 250,000 bricks per week. The depression of the 1890s caused a drastic downturn in building. Bricks were not being sold and staff laid off. The company nearly collapsed. To stave off the inevitable, in 1896 a brick co-operative was formed with Hoffman Patent Steam Brick Co., Northcote Brick Co. Ltd., New Northcote Brick Co. Ltd., Chas. Butler & Son and Fritsch, Holzer and Company. Bricks were sold throughout Victoria as the company supplied the State Government, more particularly the building of schools. They continued making bricks until the early 1970s when the works closed. The former site is now the “Ftritsch Holzer Park. The local Council purchased the 14 acre site in 1972 for $1,060.000 and used it for landfill. The site became a park in 1995. Info from Victorian Heritage Bricks, Brick Makers and Brick Works http://rameking2.blogspot.com.au/2013/12/fritsch-holzer.htmlHistoric - Narrow Gauge Industrial Brickworks Equipment - Victoria, AustraliaWheelbarrow - Timber frame with Iron bracing and wheel.puffing billy, pbr,, wheelbarrow - fritsch, holzer & company brickworks, fritsch, holzer & company

The Q class were introduced as bogie flatwagons in the 1870's. Large Q wagons as shown were built to the 1920's In the early 1900's, some Q wagons were modified for Pintsch Gas traffic with a small pump motor cabin at one end and a tank for carrying the gas. Other conversions for traffic were as required. Examples were: sheet glass, skeletal underframes between workshops In 1926 the railways built two narrow gauge Garratt locomotives. As normal wagons were unsuitable for moving these locomotives a special skeletal wagon was built. The engines were split into units for transportation. It featured axle bearings and boxes from steam engines, had hinged buffers that could drop out of the way during loading/unloading. It also featured 'strap' rail along the deck. The wagon was Q 129. This wagon was also available for general narrow gauge rolling stock. Q wagons were numbered from 1 to 136. Service History: *Q 129.VA - 1/ 6/1926 NWS Built new H/brake & drop buffers. For traffic of Narrow Guage stock 31/ 1/1931 NWS Into Workshops - 16/ 6/1931 NWS Out of Workshops (50 days) 6/11/1931 NWS Into Workshops - 27/11/1931 NWS Out of Workshops (22 days) 24/ 8/1936 NWS Into Workshops - 10/ 9/1936 NWS Out of Workshops (18 days) 27/11/1936 NWS Into Workshops - 26/ 2/1937 NWS Out of Workshops (Light repairs) circa 1960 - Photograph SL20 p32, loaded with 7NA / /1975 - Photograph #393 / /1976 - Photograph #553, #554 19/ 3/1979 - Condemned - 10/ 4/1979 - Off Register - 10/ 4/1979 - Sold (to) ETR, Belgrave / /1989 EME Body [GRE]. [SXC]: 29/3/92, MEL127E5, Puffing Billy at station Historic - Victorian Railways - Transporter wagon used to carry and transfer 2' 6" Narrow gauge rolling stock over Victorian broad gauge (1,600 mm (5 ft 3 in) main lines to the narrow gauge lines. Q 129 was unique, it was built to transport narrow gauge locomotives. Transporter Wagon made of Steel and wrought Iron129Q129q, puffing billy, transporter wagon

G. and J. Weir of Holm Foundry, Cathcart, Glasgow and now known as the Weir Group. The company was established in 1871 as an engineering firm by two brothers, George and James Weir, founding G. & J. Weir Ltd. The Weir brothers produced numerous groundbreaking inventions in pumping equipment, primarily for the Clyde shipyards and the steam ships built there. These pumps became extremely well known for their use as boiler feedwater pumps, and for ship's auxiliary equipment such as evaporators. Under W D Weir, the company turned to producing munitions and war material in the First World War. As well as shells, they manufactured aircraft including the Royal Aircraft Factory F.E.2 fighter and bomber. James George Weir (aviator, son of James Galloway Weir) a director of the company formed the Cierva Autogiro Company. G & J Weir would be a financial supporter of the company during its existence. In 1943, they provided the finances for the construction of the W.9, an experimental helicopter, to Air Ministry requirements. It was first listed on the London Stock Exchange in 1946. Double-acting Weir steam pumps were virtually standard fitment on British-built steamships, being used for pumping water, fuel, air and much else well into the 1950s, as well as being used on other ships worldwide. Historic - Double-acting Weir steam pumpSteam Driven Pump made of iron & steel puffing billy, weir pump, weir, steam driven pump

Industrial Treadle Lathe Possibly a Star Treadle LatheHistorical - Industrial Treadle Lathe Treadle Lathe made of Steel and wrought irontreadle lathe, puffing billy

6 NC Brake Van (4 ton capacity) Service History Purchased by the Puffing Billy Preservation Society (Body & underframe only): NC 6 Brake Van (4 ton capacity) - Awaiting restoration *NC 6.VA - 17/12/1919 NWS Built new - /11/1928 - Modified AC Malco BO 5/10/1934 NWS Into Workshops - 9/10/1934 NWS Out of Workshops (5 days) 17/ 3/1955 - Scrapped Historic - Victorian Railways - narrow gauge rolling stock - NC Class Full Guard's Van 6 NCTimber Guards Van wrought iron framepuffing billy, nc van, narrow gauge, victorian railways, 6nc, guards van, narrow gauge rolling stock

Ratchet Spanner This spanner is used on track work. Being a ratchet spanner, it allows movement in one direction, with a reverse movement to keep the tool in the same position, but it does not allow the item being tightened to rotate with the spanner in the reverse direction. This allows for longer handles and therefore gives more force to the item that is being tightened or released.Historic - Railway Permanent Way and Works - track equipment - Ratchet SpannerRatchet Spanner made of cast wrought iron puffing billy, ratchet spanner

During early farming in Australia (before motorised whipper snippers) the hand held sickle was used to cut long grass, in this case in or around railway tracks. The inside of the blade's curve was sharp, so that the user can either draw or swing it against the base of the grass, catching the stems in the curve and slicing them at the same time. Historic - Railway Permanent Way and Works - track equipment - Grass SlasherWrought iron sickle with extended with wooden handle.puffing billy, extended sickle, farm tool, reaping hook, curved blade, grass cutting