Colour photographs of a steel rimmed wooden mallet.mallet, tools, steel rimmed wooden mallet

In 1970 Stanley Works Pty. Ltd. took over toolmaker, Turner Manufacturing Company, who were situated in Whitehorse Road, Nunawading.Coloured photograph of a male worker in a blue boiler suit in a Stanley Works machine room.tools, stanley works pty. ltd, manufacturing industry

Stanley Works Pty Ltd took over Turner Manufacturing, Nunawading, in 1970. They closed their doors in 1992.Coloured photo of Stanley Works Pty Ltd building, with three signs - Stanley, Stanley Hardware, Hardware Divisiontools, stanley works pty ltd, manufacturing industry

Brace for holding drill bits for drilling holes in wood or steel, with wooden handles.tools, multipurpose, drill

Roller used for applying ink to printing blocks, metal with wooden handle.trades, printing, tools

Mechanical mobile car jack made by the TREWELLAH company of Trentham for APAC Industries Ltd. Known as a "Service Jack" used for servicing cars and light vehicles. Mounted on 4 wheels, two being castors. Painted red. On a brass plate fixed to top of body "APAC / Service Jack No. 247 / Range 4 5/8" to 19 3/4" / Capacity 5000 lb / Caution: Do not overload / This jack is guaranteed to raised 5000 lb / Overloading renders this guarantee null and void / lubricate jack thoroughly before using / always keep jack clean and well oiled / Manufactured in Australia / APAC Industries Limited. / South Australia"tools, automotive, servicing

"Jonsered" petrol chainsaw with approximately 19" (50cm) bar. Red engine housing, aluminium handle. Pull start with information plate on starter housing.On information plate, "Mod. XD / Jonsereds / Sweden / No. 28637"machinery, chainsaw, tools

Used circa 1900.A steel Fettler's pick head. One end is flattened and squared off and it has a long point at the opposite end. It was used to maintain railway tracks in the 19th century.It is stamped - 1 with an arrow pointing downwards.tools, hand tools, picks

Used 19th century.A small forged steel pick head with a point at one end and a square opposite end. It may have had a special purpose which is unknown. Used in the 19th century.It is stamped - 'Brades and Co 1337, 41lbs'tools, hand tools, picks

Small hand drill with holding handle with a winding handle with " Leytool - made in England" Covered by Pat No. 20987/44 World PatentsAs abovetools, drill, leytool

Small hand 'stanley' drill with red dial with a handle and a wooden knob. A '104' drill, has a handmade replacement handle.C0525 0255 on Dialtools, hand drill, stanley

Large "Engineer's hammer with metal & copper coiled wire around wooden handle. "Cross Pein"tools, hammer, "cross pein"

BlacksmithIron G. clamp with metal screw with clamp on end of screwblacksmith, tools, g clamps

BlacksmithIron G clamp with metal screw With clamp on end of screwblacksmith, tools, g clamp

A coloured photograph showing a lady using a sickle to harvest lavender.tools, farm implement, lavender

This handmade black glass bottle was recovered between the late 1960s to early 1970s from the wreck of the sailing ship Loch Ard. The ship was wrecked in 1878 and its remains are located at Mutton Bird Island, near Port Campbell, Victoria and bottles of liquor were listed as part of the Loch Ard’s cargo. This bottle is now part of the John Chance collection. Black glass is one of the oldest bottle colours and dates back to the early 17th century. In the 1840s to late-1870s black glass bottles were mainly used for liquor and ale. All glass is made from silica, which is found in quartz sand. The naturally occurring sand has impurities, such as iron, that determine the colour of the glass. Residual iron leads to green or amber coloured glass, and carbon in the sand makes that glass appear as ‘black’. A strong light behind the glass will show its colour as dark green or dark amber. This handmade bottle appears to have been made in a dip mould, with the molten glass blown into a seamless shoulder-height mould to give the body a uniform symmetrical shape and size. After the body is blown, the glass blower continues blowing free-form (without the mould) to form the shoulder and neck, then the base is pushed up with a tool, and the finish for the mouth is added with his tools. The dip mould gives the body a slightly textured surface, with the free blown shoulders and neck being smoother and shinier. There is usually a line around the shoulder where the mould of the body meets the shoulder, and a lump or mark in the centre of the base, called a pontil mark, where the push-up tool was removed. The ship Loch Ard was built on the River Clyde in Scotland in 1873 for the prestigious Loch Line of colonial clipper ships, designed for the Australian run. It sailed from England on 1 March 1878 carrying 37 crew, 17 passengers and a diverse general cargo ranging from luxury items to bulk railway iron. On 1 June 1878, emerging from fog and hearing too late the sound of breakers against the tall limestone cliffs, the vessel struck the southern foot of Mutton Bird Island and sank in 23 metres of water. Of the fifty-four people on board only two survived, one young male crewman, Tom Pearce, and one young female passenger, Eva Carmichael. This bottle is historically significant as an example of liquor bottles imported into to Colonial Victoria in the mid-1800s to early-1900s. Its significance is increased by also being an artefact recovered by John Chance, a diver from the wreck of the Loch Ard and other wrecks in the late-1960s to early-1970s. Items that come from several wrecks along Victoria's coast have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. The bottle is also significant for being part of Flagstaff Hill’s collection of artefacts from the Loch Ard, which is significant for being one of the largest collections of artefacts from this shipwreck in Victoria. The collection is significant for its association with the shipwreck, which is on the Victorian Heritage Register (VHR S417. The collection has additional significance because of the relationship between the objects, as together they have a high potential to interpret the story of the Loch Ard. The Loch Ard collection is archaeologically significant as the remains of a large international passenger and cargo ship. The Loch Ard collection is historically significant for representing aspects of Victoria’s shipping history and its potential to interpret sub-theme 1.5 of Victoria’s Framework of Historical Themes (living with natural processes). The shipwreck is one of the worst, and best known, shipwrecks in Victoria’s history.Bottle, black glass. Thick matt body, with slightly bumpy texture, areas with sheen, colour imperfections. Mouth is sealed, and has remnants of tape on outside. Tooled cork-top finish with ring below. Slightly bulged neck. Shoulder has some diagonal creases and a distinct line where shoulder meets body. Body tapers inwards to base. It has a bubble and diagonal crease lines. Base is uneven. Pushed up base has pontil mark. Handmade, dip mould. No inscriptions.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, loch ard, mutton bird island, eva carmichael, tom pearce, john chance, bottle, black glass, antique bottle, bulge neck bottle, handmade, dip mould, mouth blown, pontil base, blown bottle, liquor bottle, ale bottle

This scrapbook contains newspaper cuttings, hand written poems and quotes from friends and family members and pressed flowers and ferns. Entries were made in the mid 1800s to early 1900s and relate to Duncan family history. The initials suggest this is Lillie and Olive's father, David Hood Duncan, who created this scrapbook. David Hood Duncan married Ada Blanche Thomson (1861-1928) on 25 November 1896. Ada was the daughter of John Gilmour Thomson (1829-1905) from Moonee Ponds and Hannah Davies (1834-1890) Their first daughter, Lillie, was born on 15 October 1897 in Woodland, South Gippsland where he was a farmer. In 1908, 1910, 1911, 1913, Lillie Duncan sent letters to Patience from the Young Folk section of the Australian. She was writing from Woodlea, Cathkin, where they had moved as there was no school in South Gippsland. They moved to 11 Paxton Street, East Malvern when David retired. He was leasing a farm, Kia Ora, in Koo Wee Rup, the South Gippsland. Ada Blanche died on 28 December 1928. David died on 24 May 1942.This is an album of social and historic significance, being part of a sub-collection of material that provides a snapshot of the type of individuals and families involved in the Ladies Harbour Lights Guild and the activities carried out by that organisation.Decoratively embossed word on front cover : "ALBUM" . Inner pages: Handwritten in various inks throughout are poems and quotes. Two unidentified initials followed by Duncan name on the inside page. duncan, poems, quotes, newspaper cuttings, albums, scrapbooks, lillie duncan, olive duncan, poetry, ferns, plants, david hood duncan, ada blanche duncan (nee thomson), epistolary

Designed and constructed in Camp1 by W (Jack) Weber and used to make scarves by and for the interneesHandmade wooden loom with levers ,pulleys ,eyelets ,upright shapes and part woven wool made from scrap metal and improvised tools. Jack was an engineer who migrated to Queensland and was interned in 1939.tatura, handcrafts, weaving

Tooled leather folding frame with brass clips. Leather strip covers hinge. Embossed burgundy velvet protects metal and glass frame. Photo of gentleman unknown. Photographic method known as 'daguerreotype'.domestic items, ornaments / decorative, photography, photographs / slides / film

Portable writing desk. Made of wood with reinforced brass corners, brass hinges, two lift-up compartments, two compartments for ink wells, tooled leather writing surface and pen rest.domestic items, writing equipment

Pear shaped tool. Wooden handle (brown) and metal screw down connecter. Also includes 2 metal needles with eyelets. Thread spool inside handle for thread to be fed through to needle..

Catalogue for an auction sale held at the New Long Tunnel Gold Mine, Walhalla, Vic. On 12 February, 1941. Items include: mining machinery, tools, buildings, corrugated iron and leather belting.business, auctioneers, j h curnow & son pty ltd, ian dyett collection - auction catalogue - new long tunnel gold mine - walhalla, j h curnow & son, j l jamieson, the cambridge press

Auction with red card cover. Items are motorised machine tools held on 5 November, 1947 at the Machinery Auction Depot in Melbourne. J. H. Curnow & Son Pty. Ltd. Were the auctioneers.business, auctioneers, j h curnow & son pty ltd, ian dyett collection - auction catalogue - machinery auction depot, j h curnow & son pty ltd, prahan telegraph printing co

The 8th Light Horse Regiment AIF was raised at Broadmeadows Victoria in September 1914 under the command of Lieutenant Colonel Alexander White and formed part of the 3rd Light Horse Brigade. The regiment served at Gallipoli where in a courageous but ill-fated charge at the Nek on 7 August 1915 it suffered horrendous casualties including Lieutenant Colonel White. Rebuilt in Egypt under the command of Lieutenant Colonel Leslie Maygar VC the regiment went on the serve throughout the Middle East Campaign. Colonel Maygar died of wounds at Beersheba when the regiment was attacked by enemy aircraft while waiting to follow up the successful charge of the 4th LH Brigade on 30 October 1917. The 8th Light Horse AIF was disbanded in 1919, but soon after re-raised as the 8th (Indi) Light Horse in the Citizen Military Forces, superseding 16th (Indi) Light Horse. It had its headquarters at Benalla with sub-units throughout the Upper Murray and Northeast Victoria. In December 1941, the regiment converted from horse to mechanised, initially as 8th Reconnaissance Battalion then in July 1942 it became 8th Cavalry Regiment and served in Northern Territory. As Japanese threat to the mainland declined the regiment was disbanded.Two colour photographs of former Farrier Sergeant Merv ( Banjo ) Harris, 8th Cavalry regiment presenting his farriers tool kit to 8/13 VMR Museum 10 December 1989.

Black and white photographs in an envelope marked O.H.M.S. Department of Agriculture, Burnley Gardens, E.1. All stamped,"Photograph by Publicity Branch Victorian Department of Agriculture." (1)-(2) B1687A-B Heavily pruned fruit tree. (3) B1688 Grafting tools. (4)-(8) B1689A-E Cutting techniques. (9)-(15) B1690A-G Joining graft techniques. (16)-(21)A-F Camellia graft. (22)-(26) B1692A-E Magnolia air-layering. (27)-(31) B1693A-E Plum root cuttings and scions and materials. (32)-(36) C668A-E Removing and planting rooted magnolia graft.department of agriculture, burnley gardens, pruning, fruit trees, grafting, tools, cutting, techniques, camellia, magnolia, plum, air-layering, approach grafting, whip and tongue grafting

Items in collection re Sgt James C WATT No 533, 24th BN, refer Cat No 3554.2 for his service history..1) & .2) Round, metal, button with imprint of Australia & crown on front. Attached ring on back. .1) Printed on back: “K C LUKE PTY LTD MELBOURNE” .2) Printed on back: “EMPIRE - TOOL SYD” .1) & .2) Embossed print around edge: “AUSTRALIAN MILITARY FORCES” uniform, buttons, army, amf