Showing 2222 items
matching shaft
-
Tennis Australia
Racquet, Circa 1966
A Revelation Professional Model tennis racquet, with ribbon whipping around shoulders and shaft, and a leather handle grip with X-formation perforations. Revelation logo features across base of head. Model name features along shaft. 'R' trademark features on plastic butt cap. Materials: Wood, Nylon, Leather, Ink, Glue, Lacquer, Metal, Ribbon, Paint, Adhesive tape, Plastictennis -
Tennis Australia
Racquet, Circa 1927
A Talmo Model 3 tennis racquet, with cloth shoulder supports, reinforced with ribbon whipping, plastic collar around shaft, and a fine-grooved, fish-tail handle. Inscription across throat, on obverse: TALMO/REG'D/MODEL/3. Previous owner has written name on reverse of shaft. Materials: Wood, Nylon, Ink, Glue, Lacquer, Metal, Plastic, Ribbon, Paint, Clothtennis -
Tennis Australia
Racquet, Circa 1983
An Head 'Tournament Director' tennis racquet, with: aluminium frame with twin shaft; plastic bridge and butt cap; light brown leather handle grip; and 'Graphite 6' netting. Manufacturer's name features across base of bridge, and across butt cap. Model name features along outer left shaft. Materials: Metal, Graphite, Leather, Plastic, Adhesive tape, Paint, Ink, Papertennis -
Tennis Australia
Racquet, Circa 1969
A Wilson 'T2000' metal tennis racquet, with double shaft; cream plastic shaft casing and silver whipping. Handle wrapped with tan perforated leather. Net anchored to metal wire wrapped around head frame. Cream plastic butt cap with white label featuring 'W' logo in red. Materials: Metal, Plastic, Adhesive tape, Nylon, Leather, String, Adhesive labeltennis -
Tennis Australia
Racquet, Circa 1950
A badminton racquet with wooden head and handle, and metal shaft, reinforced with conical plastic tubes. Shoulders and shaft feature string whipping, and handle features rubber grip. Model logo and emblem feature on throat on obverse, whilst head photo image of Budge features on throat on reverse. Materials: Wood, Lacquer, Nylon, Ink, Adhesive tape, Metal, Paint, Rubber, Plastic, Glue, Stringtennis -
Tennis Australia
Racquet, Circa 1950
A badminton racquet with wooden head and handle, and metal shaft, reinforced with conical plastic tubes. Shoulders and shaft feature string whipping, and handle features rubber grip. Model logo and emblem feature on throat on obverse, whilst head photo image of Budge features on throat on reverse. Materials: Wood, Lacquer, Nylon, Ink, Adhesive tape, Metal, Paint, Rubber, Plastic, Glue, Stringtennis -
Tennis Australia
Racquet, Circa 1950
A badminton racquet with wooden head and handle, and metal shaft, reinforced with conical plastic tubes. Shoulders and shaft feature string whipping, and handle features rubber grip. Model logo and emblem feature on throat on obverse, whilst head photo image of Budge features on throat on reverse. Materials: Wood, Lacquer, Nylon, Ink, Adhesive tape, Metal, Paint, Rubber, Plastic, Glue, Stringtennis -
Tennis Australia
Racquet, Circa 1971
A Wilson Billie Jean King Autograph tennis racquet. Base of head features Wilson logo. Throat features model name and heraldic shield with 'B/K' in centre. Base of shaft and butt cap feature 'W' trademark. Autograph by King features along shaft on reverse. Materials: Wood, Nylon, Leather, Glue, Metal, Lacquer, Paint, Adhesive tape, Plastic, Ribbon, Hidetennis -
Tennis Australia
Racquet, Circa 1981
A Wilson Andrea Jaeger Courtstar tennis racquet. Base of head features Wilson logo. Throat features model emblem - a blue crown. Shaft features model name. Lower shaft and butt cap feature 'W' trademark. Leather handle grip features X-form perforations. Materials: Wood, Nylon, Leather, Glue, Metal, Lacquer, Paint, Adhesive tape, Ribbon, Plastictennis -
Tennis Australia
Racquet, Circa 1973
A Wilson Stan Smith Tournament tennis racquet. Base of head features Wilson logo.Throat and shaft feature the model name, with a gold and white chevron device within a circle. Lower shaft and butt cap feature 'W' trademark. Leather handle grip features triangular-patterned perforations. Materials: Wood, Nylon, Leather, Glue, Metal, Lacquer, Paint, Ribbon, Plastic, Adhesive tapetennis -
Tennis Australia
Racquet, Circa 1978
A Wilson Jimmy Connors Professional Champ tennis racquet. Base of head features Wilson logo. Throat and shaft features model name, with a red and black stylised column device. Lower shaft and butt cap feature 'W' trademark. Leather handle grip features patterned perforations. Materials: Wood, Nylon, Leather, Glue, Metal, Lacquer, Paint, Adhesive tape, Ribbon, Plastictennis -
Tennis Australia
Racquet, Circa 1978
A Wilson Chris Evert Champ racquet. Base of head features Wilson logo. Throat features model name. Base of shaft and butt cap feature 'W' trademark. Leather handle grip features X-formation perforations. Autograph by Evert features along shaft on obverse. Materials: Wood, Nylon, Leather, Glue, Metal, Lacquer, Paint, Plastic, Ribbon, Adhesive tape, Inktennis -
Tennis Australia
Racquet, Circa 1957
A Regent, Don Budge Contender, Tournament Model tennis racquet. Regent logo features across the crown, and base of the head. Model name features on the throat and shaft. Decal head image of Budge features on lower shaft. Leather handle grip features quatrefoil perforations. Materials: Wood, Nylon, String, Glue, Lacquer, Metal, Paint, Leather, Ribbon, Ink, Adhesive tape, Plastictennis -
Tennis Australia
Racquet, Circa 1980
A Regent Triumph tennis racquet. Regent logo features across the base of the head and plastic butt cap. Model name features across the throat. 'R' trademark features at base of shaft. Model details feature on the left side of the shaft. Leather handle grip features quatrefoil perforations. Materials: Wood, Nylon, Glue, Lacquer, Metal, Ink, Plastic, Adhesive tape, Leathertennis -
Tennis Australia
Racquet, Circa 1950
A Bancroft Wimbledon tennis racquet, with plastic whipping from shoulders to shaft, and leather handle with patterned perforations. Bancroft logo features across base of head. Throat features model name, and a decal image of Wimbledon main court. 'B' trademark features on lower shaft. Materials: Wood, Nylon, Leather, Glue, Lacquer, Metal, Ink, Plastic, Cloth, Adhesive tape, Paint, Stringtennis -
Lakes Entrance Regional Historical Society (operating as Lakes Entrance History Centre & Museum)
Photograph, Phillip Hancock, 1998 c
Also a black and white photograph of Marion Elizabeth Howlett with a visitor in her jinker Molly the name in shafts. Taken by James Howlett at Inglewood Punt Road Metung. James Howlett built a camera and took family photographs 04408.1, 8 x 11 cmBlack and white photograph showing the James Howlett family, James, Marion Snr, Eva, Maud, Ethel, Herbert, Mabel, Albert, Alfred, Arthur, Marion Jnr and friend Phyllis Hancock and child setting out for a family picnic from their home Inglewood Punt Rd Metung Victoriagenealogy -
Vision Australia
Functional object - Object, Hunt Wilde, Collapsible white cane
Collapsible white cane cylindrical in shape made from metal, plastic and rope. Handle is a red plastic textured moulding. Tip is also red with a red plastic protrusion. Shaft is painted white. Made in 5 sections. Internal rope holds the sections together. 5 metal/plastic pieces joined together with an elasticized cordassistive devices, orientation and mobility -
Flagstaff Hill Maritime Museum and Village
Harness Buckle
When the ship Schomberg was launched in 1855, she was considered the most perfect clipper ship ever to be built. James Blaine’s Black Ball Line had commissioned her to be built for their fleet of passenger liners. At a cost of £43,103, the Aberdeen builders designed her to sail faster than the quick clippers designed by North American Donald McKay. She was a three masted wooden clipper ship, built with diagonal planking of British oat with layers of Scottish larch. This luxury vessel was designed to transport emigrants to Melbourne in superior comfort. She had ventilation ducts to provide air to the lower decks and a dining saloon, smoking room, library and bathrooms for the first class passengers. At the launch of Schomberg’s maiden voyage, her master Captain ‘Bully’ Forbes, drunkenly predicted that he would make the journey between Liverpool and Melbourne in 60 days. Schomberg departed Liverpool on 6 October 1855 with 430 passengers and 3000 tons cargo including iron rails and equipment intended the build the Geelong Railway and a bridge over the Yarra from Melbourne to Hawthorn. The winds were poor as Schomberg sailed across the equator, slowing her journey considerably. She was 78 days out of Liverpool when she ran aground on a sand-spit near Peterborough, Victoria, on 27 December; the sand spit and the currents were not marked on Forbes’s map. Overnight, the crew launched a lifeboat to find a safe place to land the ship’s passengers. The scouting party returned to Schomberg and advised Forbes that it was best to wait until morning because the rough seas could easily overturn the small lifeboats. The ship’s Chief Officer spotted SS Queen at dawn and signalled the steamer. The master of the SS Queen approached the stranded vessel and all of Schomberg’s passengers were able to disembark safely. The Black Ball Line’s Melbourne agent sent a steamer to retrieve the passengers’ baggage from the Schomberg. Other steamers helped unload her cargo until the weather changed and prevented the salvage teams from accessing the ship. Local merchants Manifold & Bostock bought the wreck and cargo, but did not attempt to salvage the cargo still on board the ship. They eventually sold it on to a Melbourne businessman and two seafarers. After two of the men drowned when they tried to reach Schomberg, salvage efforts were abandoned.32 In 1975, divers from Flagstaff Hill, including Peter Ronald, found an ornate communion set at the wreck. The set comprised a jug, two chalices, a plate and a lid. The lid did not fit any of the other objects and in 1978 a piece of the lid broke off, revealing a glint of gold. As museum staff carefully examined the lid and removed marine growth, they found a diamond ring, which is currently on display in the Great Circle Gallery.33 Flagstaff Hill also holds ship fittings and equipment, personal effects, a lithograph, tickets and photograph from the Schomberg. Most of the artefacts were salvaged from the wreck by Peter Ronald, former director of Flagstaff Hill. The Schomberg, which is on the Victorian Heritage Register (VHR S612), has great historical significance as a rare example of a large, fast clipper ship on the England to Australia run, carrying emigrants at the time of the Victorian gold rush. She represents the technical advances made to break sailing records between Europe and Australia. Flagstaff Hill’s collection of artefacts from the Schomberg is significant for its association with the shipwreck. The collection is primarily significant because of the relationship between the objects, as together they have a high potential to interpret the story of the Schomberg. It is archaeologically significant as the remains of an international passenger Ship. It is historically significant for representing aspects of Victoria’s shipping history and for its association with the shipwreck and the ship, which was designed to be fastest and most luxurious of its day Horse harness brass buckle 2¾" x 2⅞" Buckle has middle shaft missing, and has Slight verdigris and encrustation. Recovered from the wreck of the Schomberg. warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, schomberg, shipwrecked-artefact, clipper ship, black ball line, 1855 shipwreck, aberdeen clipper ship, captain forbes, peterborough shipwreck, ss queen, horse harness, brass buckle -
Bendigo Historical Society Inc.
Document - CENTRAL DEBORAH GOLD MINE: HISTORY OF CENTRAL DEBORAH
Eight foolscap handwritten pages of Central Deborah Gold Mine history. Written by Albert Richardson, the history also includes information on the Londonderry West shaft (1881).bendigo, mining, central deborah gold mine, central deborah gold mine -
Bendigo Historical Society Inc.
Photograph - PHOTOCOPIED PHOTO OF QUEEN VICTORIA STATUE, ROSALIND PARK
faded Photocopied black and white photo of Queen Victoria Statue , Rosalind park. Hustlers Royal Reserve City Mine shaft workings, and Post Office in the background.photograph, building -
Bendigo Historical Society Inc.
Functional object - WINCH: GOLD MINING WINDLASS
Gold Mining Windlass. Used in early mining shaft in Bendigo Goldfields. Has been on Display at National Museum of Australia. Timber Construction with Large steel handle. -
Bendigo Historical Society Inc.
Map - GEOLOGICAL MAP BENDIGO GOLD FIELD
Geological map Bendigo gold field. Showing anticlines, synclines, shafts, alluvial, contours. Produced by the deprtment of mines. Two originals plus two laminated copies -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Tool - Intravenous needle
Metal intravenous needle. Needle has a dial and fittings at one end, and a straight hollow shaft ending in a sharp point. The number '10' is engraved on the fitting of the needle.'10'surgery -
Lakes Entrance Regional Historical Society (operating as Lakes Entrance History Centre & Museum)
Photograph, Bulmer, 1945 c
Black and white photograph showing a workman, believed to be foreman of deep shaft operations, shaking hands with officials of Lakes Oil Limited company at Lakes Entrance Victoriaoil and gas industry -
Stawell Historical Society Inc
Memorabilia - Realia, c1920-1930
Ray Lamp Stand (Ex Imbros Private Hospital) Heavy Base flexible shaft and Bakelite Globe Fitting. Used in Imbros Private Hospital Scallan Streetstawell -
Clunes Museum
Photograph
MARTIN POWER. STORY OF HIS LIFE IN 'IF ONLY I'D LISTENED TO GRANDPA'.1 .2 .3 .4 .5 .6 BLACK AND WHITE PHOTOGRAPH SOF MR MARTIN POWER WORKING A WINDLASS OVER ONE OF HIS MINE SHAFTS MARTIN POWER - STORY OF HIS LIFE - 'IF ONLY I'D LISTENED TO GRANDPA'local history, photography, photographs, mining -
Tatura Irrigation & Wartime Camps Museum
Tool - Awl, 1940's
Made by internees at camp 3, using wood sourced from under the barracks ie : stumps. Used for wood workingAwl and wooden handle with metal ferrule at end, thin metal shaft , slightly bent coming to a sharp point. Spare handle in a light wood with a brass ferrule.kazenwadel, blacksmith, wood, tools camp 3, chisels, mallets -
Tennis Australia
Racquet, Circa 1977
A Bobby Riggs Fox 'Hustler' split shaft tennis racquet, with black plastic bridge. Materials: Metal, Leather, Ink, Adhesive tape, Nylon, Plastic, Painttennis -
Tennis Australia
Racquet, Circa 1977
A Bobby Riggs, Fox 'Hustler' split shaft tennis racquet, with black plastic bridge. Materials: Metal, Leather, Ink, Adhesive tape, Nylon, Plastic, Painttennis -
Stawell Historical Society Inc
Photograph, Sloane's & Scotchman Mining Co Poppet Head in Upper Main Street Big Hill looking West. c1890
Gentleman sitting in front of Sloane's & Scotchman Mining Co Poppet Head Upper Main Street Big Hill looking West. Main Street visible in distance background.Poppet head above shaft and engine shed at right. Looking towards corner of Main and Lazelle Streets. Man seated at front centre of photo in boater hat.stawell mining, streetscape