Part of a 43-photo record of the MMBW�s engineering feat in drilling a 12 inch pipe line up to 40 feet deep through rock hardened by volcanic action associated with geological fault that occurs along the line. The work took place from October 1979 to May 1980 on the southern boundary of Hubbard Reserve, North Ringwood. The collection was presented to the Ringwood Historical Research Group by J Clarke on 9th June 1980.E561 N1 1 April 1980 A43 Last days of the boring. The mole had broken between the last two shafts. Dominic Di Nezza and Glen Pearson discuss further moves to release it.

When the ship Schomberg was launched in 1855, she was considered the most perfect clipper ship ever to be built. James Blaine’s Black Ball Line had commissioned her to be built for their fleet of passenger liners. At a cost of £43,103, the Aberdeen builders designed her to sail faster than the quick clippers designed by North American Donald McKay. She was a three masted wooden clipper ship, built with diagonal planking of British oat with layers of Scottish larch. This luxury vessel was designed to transport emigrants to Melbourne in superior comfort. She had ventilation ducts to provide air to the lower decks and a dining saloon, smoking room, library and bathrooms for the first class passengers. At the launch of Schomberg’s maiden voyage, her master Captain ‘Bully’ Forbes, drunkenly predicted that he would make the journey between Liverpool and Melbourne in 60 days. Schomberg departed Liverpool on 6 October 1855 with 430 passengers and 3000 tons cargo including iron rails and equipment intended the build the Geelong Railway and a bridge over the Yarra from Melbourne to Hawthorn. The winds were poor as Schomberg sailed across the equator, slowing her journey considerably. She was 78 days out of Liverpool when she ran aground on a sand-spit near Peterborough, Victoria, on 27 December; the sand spit and the currents were not marked on Forbes’s map. Overnight, the crew launched a lifeboat to find a safe place to land the ship’s passengers. The scouting party returned to Schomberg and advised Forbes that it was best to wait until morning because the rough seas could easily overturn the small lifeboats. The ship’s Chief Officer spotted SS Queen at dawn and signalled the steamer. The master of the SS Queen approached the stranded vessel and all of Schomberg’s passengers were able to disembark safely. The Black Ball Line’s Melbourne agent sent a steamer to retrieve the passengers’ baggage from the Schomberg. Other steamers helped unload her cargo until the weather changed and prevented the salvage teams from accessing the ship. Local merchants Manifold & Bostock bought the wreck and cargo, but did not attempt to salvage the cargo still on board the ship. They eventually sold it on to a Melbourne businessman and two seafarers. After two of the men drowned when they tried to reach Schomberg, salvage efforts were abandoned.32 In 1975, divers from Flagstaff Hill, including Peter Ronald, found an ornate communion set at the wreck. The set comprised a jug, two chalices, a plate and a lid. The lid did not fit any of the other objects and in 1978 a piece of the lid broke off, revealing a glint of gold. As museum staff carefully examined the lid and removed marine growth, they found a diamond ring, which is currently on display in the Great Circle Gallery.33 Flagstaff Hill also holds ship fittings and equipment, personal effects, a lithograph, tickets and photograph from the Schomberg. Most of the artefacts were salvaged from the wreck by Peter Ronald, former director of Flagstaff Hill. The Schomberg, which is on the Victorian Heritage Register (VHR S612), has great historical significance as a rare example of a large, fast clipper ship on the England to Australia run, carrying emigrants at the time of the Victorian gold rush. She represents the technical advances made to break sailing records between Europe and Australia. Flagstaff Hill’s collection of artefacts from the Schomberg is significant for its association with the shipwreck. The collection is primarily significant because of the relationship between the objects, as together they have a high potential to interpret the story of the Schomberg. It is archaeologically significant as the remains of an international passenger Ship. It is historically significant for representing aspects of Victoria’s shipping history and for its association with the shipwreck and the ship, which was designed to be fastest and most luxurious of its day Horse harness brass buckle 2¾" x 2⅞" Buckle has middle shaft missing, and has Slight verdigris and encrustation. Recovered from the wreck of the Schomberg. warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, schomberg, shipwrecked-artefact, clipper ship, black ball line, 1855 shipwreck, aberdeen clipper ship, captain forbes, peterborough shipwreck, ss queen, horse harness, brass buckle

faded Photocopied black and white photo of Queen Victoria Statue , Rosalind park. Hustlers Royal Reserve City Mine shaft workings, and Post Office in the background.photograph, building

Gold Mining Windlass. Used in early mining shaft in Bendigo Goldfields. Has been on Display at National Museum of Australia. Timber Construction with Large steel handle.

Metal intravenous needle. Needle has a dial and fittings at one end, and a straight hollow shaft ending in a sharp point. The number '10' is engraved on the fitting of the needle.'10'surgery

Ray Lamp Stand (Ex Imbros Private Hospital) Heavy Base flexible shaft and Bakelite Globe Fitting. Used in Imbros Private Hospital Scallan Streetstawell

MARTIN POWER. STORY OF HIS LIFE IN 'IF ONLY I'D LISTENED TO GRANDPA'.1 .2 .3 .4 .5 .6 BLACK AND WHITE PHOTOGRAPH SOF MR MARTIN POWER WORKING A WINDLASS OVER ONE OF HIS MINE SHAFTS MARTIN POWER - STORY OF HIS LIFE - 'IF ONLY I'D LISTENED TO GRANDPA'local history, photography, photographs, mining

Made by internees at camp 3, using wood sourced from under the barracks ie : stumps. Used for wood workingAwl and wooden handle with metal ferrule at end, thin metal shaft , slightly bent coming to a sharp point. Spare handle in a light wood with a brass ferrule.kazenwadel, blacksmith, wood, tools camp 3, chisels, mallets

A Bobby Riggs Fox 'Hustler' split shaft tennis racquet, with black plastic bridge. Materials: Metal, Leather, Ink, Adhesive tape, Nylon, Plastic, Painttennis

A Bobby Riggs, Fox 'Hustler' split shaft tennis racquet, with black plastic bridge. Materials: Metal, Leather, Ink, Adhesive tape, Nylon, Plastic, Painttennis

Gentleman sitting in front of Sloane's & Scotchman Mining Co Poppet Head Upper Main Street Big Hill looking West. Main Street visible in distance background.Poppet head above shaft and engine shed at right. Looking towards corner of Main and Lazelle Streets. Man seated at front centre of photo in boater hat.stawell mining, streetscape

Two corroded screws with circular narrowing to a pointed tip. Incised screw grooves extending down the body of the shaft. Incised notch extending across the nail head.archaeology, historic building, former royal mint

Three corroded screws with circular narrowing to a pointed tip. Incised screw grooves extending down the body of the shaft. Incised notch extending across the nail head.archaeology, historic building, former royal mint

BHS CollectionEight foolscap handwritten pages of Central Deborah Gold Mine history. Written by Albert Richardson, the history also includes information on the Londonderry West shaft (1881).bendigo, mining, central deborah gold mine, central deborah gold mine

The Sulieman Pasha is possibly named after the most important Sultan of the Ottoman Empire, Suleiman One, or Suleiman the Magnificent, when the Ottoman Empire was at its peak. Or potentially a number of Ottoman governors, statesmen and military commanders with the same name after, however the spelling is slightly different to the mine name. No Turkish connection was found relating to the formation of the company, and remains unconfirmed. The mine operated from two shafts; No. 1 near the corner of Humffray and Mair streets, and also near where the Welcome Nugget (2217 ounces) was found years earlier; and the controversial No. 2 shaft several blocks south bordering the northern side of the main highway through Ballarat. The company produced 62 666 ounces of gold, the twelfth highest quartz reef gold production for any mine on the Ballarat goldfield. Some crushing figure examples are January-June 1881: 3674 tonnes 1085 ounces; January-June 1885: 2949 tonnes 1281 ounces; July-December 1885: 4459 tonnes 1119 ounces; January-June 1887: 1869 tonnes 730 ounces; July-December 1892: 1450 tonnes 771 ounces; July-December 1896: 4365 tonnes 1372 ounces. Like many mines in the area, gold grades were low. John Watson was noted as mine manager in the 1880s, and John Williams 1890s. The company was re-organised twice increasing the number of shares from 4000 to 24 000, and increasing the capital available. The Sulieman Pasha Company was formed in 1878. David Fitzpatrick was given the honour of turning the first sod of both the No.1 and later No. 2 shafts. The first dividend was given to shareholders in July 1881. The company obtained a prospecting vote (government grant) to start, and was very proud to be the first Victorian gold mining company to pay the funds back to the government. The event was marked by a lavish banquet laid out for ministers and government officials by the company. Leases were purchased to the south in 1885 to the Llanberris Mine boundary, after poor results began accumulating from the small No. 1 shaft. To take advantage of this new land the company planned to sink a second shaft. Initially this was to take place on government land, but the uproar from nearby residents caused the company to purchase land along the Main Road (now Western Highway), and the old Yarrowee Hotel which had occupied the site since the alluvial digger days of the 1850's was demolished. The area had since those days become heavily occupied with a number of shops, houses, a post office, church and two schools in the immediate area. The thought of an underground mine next door drew considerable opposition. The company (before the days of public relations departments) wrote 'most people would have thought that progress as vital as mining would be supported by tradesmen whose business rely on the mining industry. It seems when it comes to mining they are bereft of their senses, and considering the low ebb of mining in Ballarat East, the action of our opponents are unaccountable. (Sarcastically) There are certain engineering difficulties in moving the quartz reefs to a new location, but if we could to appease our opponents we would'. The company also wanted to take over 4 acres of the St Paul's school oval for machinery, but accused the St Paul's Church of wanting extortionate amounts of money upfront, and on a yearly basis for the privilege. It stated the church could not be opposed to mining when several years earlier it had formed its own company to mine the land, only for shareholders to lose their money. In 1886, the company approached the Minister for Mines, and attended heated public meetings on the matter. The local residents, shop owners, and church submitted a 60 person petition to the local council and government authorities. They stated the shaft contravened the mining statutes, which stating no mining could take place within 150 yards of a public building or church. A speech by a resident stated 'mining always comes with glorious pictures of the great benefits which would accrue all parties concerned if their request is granted, but if property is destroyed or depreciated in value, no-one then comes forward and compensates them'. The No. 2 shaft was approved including taking over part of the school oval. In 1888, workers at the company's No. 2 shaft went on strike to try and bring their wages in line with other mines in the district (the No. 1 shaft was operated by tributers). William Madden (26) was killed from a fall of earth underground the same year, while a year later his father John Madden (70) was similarly killed in the Madame Berry Mine elsewhere in the district. In 1897 as the amount of gold being found fell away, it came to light part of the deal to purchase the Yarrowee Hotel site was a 5% royalty on gold found. Shareholders could not understand why they were paying a royalty to the former owners of the property. The mine closed in 1898 due to a lack of gold. In 1902 a boy (age unknown) called Charles Lee was killed from a fractured skull while working to dismantle the Sulieman Pasha plant. The fuss over the No. 2 shaft had a sequel. On the company winding up, the land was purchased by J.S. Trethowan who built a house next to the shaft. In 1907, the shaft caved-in creating a sinkhole immediately at the back of the house. A Mr Chamberlain heard a deep rumbling sound at 5am, and looked out the window to see his fowl house and thirteen chickens disappear down an expanding hole. He then went back to bed, and called the police later in the day. The shaft was 1050 feet deep, and the hole at the surface that developed was 20 feet by 17 feet across, and 20 feet depth. In 1930 it is reported a syndicate had been formed to clean out the old shaft, and re-open the mine. It is assumed this was the No. 1 shaft but no more was found. (https://www.mindat.org/loc-304239.html, accessed 07/08/2019) A transverse section plan of the Sulieman Pasha Mine.sulieman pasha company, plan, mining, united black hill mine, victoria united mine, victoria street, britannia united mine, last chance mine, llanberris mine, ottoman empire, john watson, john williams, david fitzpatrick

The date this photograph was taken is unknown. Estimated date 1960-70s. The gentleman in the photograph and location the photograph was taken are also unknown. Perhaps in the Beechworth or Stanley area. The photo is associated to another record, 6856 as it has the same elderly gentlemen in the image. He is able to be identified through wearing the same clothes and distinctive hat in both photographs. The photograph is associated to mining as the gentleman is standing next to a small mine site where perhaps a windless or whip was mounted over the entrance of the shaft. The windless was a structure mounted over the shaft, fitted with a hand-cranked winch, which was usually constructed from wood that would have been found in the surrounding area. Colour rectangular photograph printed on glossy photographic paper.Obverse: Reverse: 6856/ mining, windlass, whip, empty record

Copy of a photo of the surface at the Kentish Shaft. In the photo is the poppet legs with a flag flying, a large storage shelves, mine buildings, smoking chimney and some horse drawn vehicles. Printed under the photo is View on Surface at Kentish Shaft. Written underneath is Later Named 'Carslile Mine' Bennett Street Long Gully 1895. Unknown Public Library stamp on the right dated 16 Aug 95.bendigo, history, long gully history group, the long gully history group - view on surface at kentish shaft, carslile mine

A Wilson Speed Flo racquet, with 'SUPER-FLEX SHAFT', red painted throat and shaft, black-painted shoulder undersides, perforated black leather grip, and white cloth butt cover with red-stitched 'W' trademark. Inscription: WILSON/SPEED FLO/SPEED FLEX/FIBRE FACE. Materials: Wood, Nylon, Glue, Lacquer, Metal, Leather, Adhesive tape, Paint, Ink, String, Cloth, Ribbontennis

A Rawlings, John Newcombe Finalist tennis racquet, with ribbon whipping on shoulders and shaft, and leather handle grip with triangle-patterned perforations. Rawlings logo features across crown, and base of head. Model name features across throat. Cursive 'R' trademark features on lower shaft and in sunken butt cap. Materials: Wood, Nylon, Ink, Glue, Lacquer, Metal, Plastic, Adhesive tape, Leather, Ribbontennis

A Rawlings, Brian Fairlie Signature tennis racquet, with string whipping on shoulders, and leather handle grip with quatrefoil perforations. Rawlings logo features across base of head. Model name features along the shaft. Cursive 'R' trademark features on lower shaft (along with 'Mark of a Pro' motto), and in sunken butt cap. Materials: Wood, Nylon, Ink, Glue, Lacquer, Metal, Plastic, Leather, Ribbon, Enameltennis

A Garcia Dreadnought Driver tennis racquet, with plastic ribbon whipping around shoulders and shaft, and leather handle featuring X-formation perforations. Company logo features across base of head. Model name features along shaft. Garcia 'G' trademark features on plastic butt cap (now missing). Materials: Wood, Nylon, Leather, Plastic, Ink, Adhesive tape, Glue, Lacquer, Metaltennis

A Seamco International Cup tennis racquet, with string whipping around shoulders, and, leather handle grip with X-formation perforations. Model name features across base of head and throat, accompanied by star and wreath devices. Seamco logo features along the shaft. Seamco trademark symbol features on lower shaft. Materials: Wood, Nylon, Leather, Plastic, Ink, Adhesive tape, Glue, Lacquer, Metal, Stringtennis

A Dunlop, Rod Laver, Professional tennis racquet, with ribbon whipping around shoulders, plastic whipping around shaft, and leather handle grip with patterned perforations. Model name features across base of head and throat. 'D' trademark in arrowhead device, in front of wreathed globe, features across base of the shaft. Materials: Wood, Nylon, Ribbon, Ink, Leather, Glue, Lacquer, Metal, Adhesive tapetennis