A 52 playing card set (plus two jokers) with large print numbers and suit types. Playing cards with red and white design with numbers and suit in large print in paper packet. recreation equipment, games

A 52 playing card set (plus two jokers) with large print numbers and suit types. Playing cards with William Grant's Scotch Whiskey printed on back and numbers and suit in large print in paper packet. recreation equipment, games

A 52 playing card set (plus two jokers) with large print numbers and suit types. A fact card is included about the death of Wild Bill Hickok during a game of poker. The Aviator brand of cards was released just after the first trans-Atlantic flight in commemoration of the crossing. Playing cards with with red and white design with numbers and suit in large print in paper packet. recreation equipment, games

A 52 playing card set (plus two jokers) with large print numbers and suit types. Playing cards with black and white design with numbers and suit in large print in paper packet. recreation equipment, games

Wooden box with one end open holds three wooden dice with raised brass dots. The number 19 is written on the side of the holder. 3 wooden dice in a wooden box recreation equipment, games

One pair of large print oversized dice. 1 pair of large print dice recreation equipment, games

An incomplete set of dominoes and a wooden box that may form part of a cribbage set. 8 dominoes with raised dots in wooden box with clasp and peg holes The number 368 is written on the side of the box.recreation equipment, games

This wooden set could be used by sighted people as well as those who are blind or visually impaired. A universal game played in ancient Egypt and Rome, noughts and crosses has also become known tic-tac-toe (popularised in the USA) and there are 362,880 possible ways to play the game. Light wooden block with darker wooden discs and crosses recreation equipment, games

Designed to create an impression on paper, the slate allows users to create Braille by guiding the stylus into the correct alignment to produce Braille, through the applied use of pressure that creates a depression on one size of the paper and a raised dot on the alternative side. In this example, the frame has two hinges which allow it to sit over the paper edge, and a single line of Braille could be written.2 metal Braille frames for single line usagebraille equipment, assistive devices

Designed to create an impression on paper, the slate allows users to create Braille by guiding the stylus into the correct alignment to produce Braille, through the applied use of pressure that creates a depression on one size of the paper and a raised dot on the alternative side. In this example, the frame has two side hinges which allow it to sit over the paper edge, and four lines of Braille could be written.1 plastic Braille frame with 4 lines of 28 cells with side hingebraille equipment, equipment

Designed to create an impression on paper, the slate allows users to create Braille by guiding the stylus into the correct alignment to produce Braille, through the applied use of pressure that creates a depression on one size of the paper and a raised dot on the alternative side. In this example, a postcard sized frame fits over a notebook of the same size, and allows the user to fill the page without re-positioning the slate.1 metal Braille frame and 1 vinyl covered metal ring binder with braille pagesbraille equipment, equipment

The Optacon OPtical-to-TActile-CONverter is a compact, portable reading aid for the blind. It is about the size of a textbook, and weighs less than 2kg. It works by converting a printed image into a tactile image that a blind person can feel with one finger. After a period of training and practice, a blind person can use the Optacon to read ordinary books, magazines, newspapers, and other printed materials. The Optacon was developed after intensive research at Standford University, California, USA and was trialed by clients of the Royal Victorian Institute for the Blind (now part of Vision Australia) in 1973. It has three main sections: 1 a miniature camera, 2 an electronics section, and 3 a tactile stimulator array. The miniature camera, about the size of a pocket knife, is mounted in a housing that has rollers for easy movement along a line of print. The camera is connected to the electronics section by a lightweight cable. The electronics section and the tactile stimulator array are in the main chassis. The array consists of 144 tiny metal rods arranged in six vertical columns and 24 horizontal rows. Each of the rods can vibrate independently. The tips of these rods protrude through holes in a concave finger plate where the index finger is placed flat in order to read. These three components act together to convert the image of a printed letter or other shape into a pattern of vibrating rods, a tactile image of the letter or shape. The letter shape is tactually perceived as an image that moves from right to left on the finger, showing the left or leading edge of the letter first. Letters are felt sequentially rather than all at once, and the image should be kept moving. The Optacon converts a printed O into a tactile form that resembles a crater with a vibrating rim -- a completed circle. C would have a gap or opening on the right side of the curve. The letter F would be felt, sequentially, as a vertical line with two trailing horizontal lines. Because it can convert any ordinary printed image into a corresponding tactile image, the Optacon is not restricted to any special typestyle or language. The camera has a zoom lens that compensates for differences in the size of type. The standard Optacon lens can accommodate type sizes from 6 point to 20 point. With the optional F4A magnifier lens, type sizes as small as 4 point can be read. Powered by a rechargeable battery, and comes with its own battery charger. The battery is contained within the main chassis, and is not removable by the user. There are four basic controls on the Optacon: the Magnification Adjustment zoom button located on the camera section on the side opposite the rollers; and the On-Off switch, the Stimulator Intensity Adjustment knob, and the Threshold Adjustment knob located on the right side of the front panel. The Circuit Breaker protrudes from the right-hand wall inside the chassis compartment. From left to right when the back panel is facing you, are located: the jack for connecting the battery charger; the Battery Check button; the Normal-Invert switch; and the Input/Output I/O connector for use with the Visual Display, when using the Repeater Cable to connect two Optacons to one another or with other accessories. Designed not be removed from the leather case during normal operation, the On-Off switch is a slide switch located on the right side of the front panel. It slides up and snaps into place in the on position. 1 black with orange front, rectangular device in leather case assistive devices, audio equipment

A set of 70 (incomplete as full set believed to be 85 cards) black and white and colour stereoscopic charts, divided into series Includes geometric, pictorial and photographic examples of charts and Schlechteres Auge test. An instructional leaflet is also included. These featured images thought to strengthen the eye muscles.1 rectangular fawn cardboard box sleeve which contains specially printed cards with pictures and text6th editionequipment, emil hegg

The sewing palm was used by visually impaired workers in the mat making workshop at the Royal Victorian for the Blind Institute during the binding of mats to protect their palms from the 17cm-long curved mat making needle.1 leather folded band with indented metal square attached and leather lacing fastening at back assistive devices, employment

The Braille Lite harnessed the advantages of a computer to write in Braille and provides responses either in Braille or synthetic voice. Weighing around a kilogram, it was considered a lightweight notebook that also could be connected to other computers and stored Braille in it's inbuilt hardware. 1 beige rectangle with 7 raised buttons, a long space bar and refreshable braille display in black, held in a black plastic carrying case + printed instruction bookBraille Lite (R) Sticker attached over 'Blaze Engineering'.braille equipment, stephen jolley

A hard white plastic ball is currently (2015) used in Australia and it is slightly larger and has holes in it so sound can be released from the bottle tops and led weight. This ball has been in use since the beginning of the 2003/2004 season.1 white plastic cricket ball with metal bellsrecreation, assistive devices

The black nylon blind cricket ball was in use since 1974 until the end of the 2002/2003 season. It was hand woven around a wire frame, with lead for weight and bottle tops for sound placed inside.1 black nylon cricket ball with metal bellsrecreation, victorian blind cricket association

The plastic ball has bells inside to make it audible when it is hit by the rectangular wooden 'Swish bat'. 'Swish' is a fast, invigorating game, and was developed by blind people in Australia and has been played here for many years. It is played on both a recreational and competitive level; and allows blind, vision impaired and sighted people to compete on almost equal terms. Swish is like table tennis, but instead of hitting a ball over a net, the ball is hit under a net and must travel along the surface of the table. The net is at a height that so that those players with various degrees of sight do not have an advantage over blind players. Swish is either played as a doubles or singles competition. The game can be played from one game to the best of five, and the first to eleven or the advantage of 2 after eleven.1 swish ball with 26 holes containing 3 metal bellsrecreation, swish

This two level Liquid Level Sensor is an aid which prevents cups from being overfilled with 2 levels of liquid. The unit simply hangs over the side of a cup or glass with the probes on the inside. Ideal for making a cup of tea or coffee with milk. Simply pour in the hot water stopping when a pulsating tone is heard then pour in milk stopping when a continuous tone is heard. Can also be used as a single level sensor such as for non mixed drinks. Handy magnets on the back of the unit allow for easy storage on fridge or other metal object. Uses a 12V battery. 1 black liquid sensor with 2 magnets assistive devices, equipment

The Mowat Sensor model MS 01, is a pale green, palm-sized, plastic battery-operated device with a darker green switch on top. It is partially open at one end with two grilles. A microphone plugs into the other end with a wrist strap. It came with a brown vinyl carry case and owner's manual, which are not included. This handheld device for the visually impaired uses high frequency sound to detect objects within a narrow beam. The sensor vibrates if an object is present, responds to closest object within the beam. The vibration rate increases as user approaches object. There are two range settings: short, responds to objects less than 1 meter away (indoor use) and long, responds to objects of sufficient size up to 4 meters. The sensor can be handheld or carried in pocket or purse. As a facility intended for partially sighted people, the compass also includes an in-built color indicator (visible through the semi-transparent enclosure), which indicates the direction using a combination of three colours. Weight: 185 grams. Comes with dark brown vinyl case.1 pale green coloured plastic rectangle sensor with a brown nylon, plaited wrist strap Model MS01assistive devices, orientation and mobility

Photograph of John Cook with two clients, one holding a large button telephone and the other writing on a notepad using an overhead light. One black and white photograph has been altered to create a portrait of John Cook.B/W photographs, and b/w and col. transparencies of John Cook and two clients using assistive devices. association for the blind, john cook

6 photographs of railway station in ruins before removal from siteDocuments the neglect of the railway station in the late 1970’s before the removal of the equipment and buildings6 coloured photographs in collage of dilapidated station transport, rail, road, derelict, railway, station

Used by Captain William RobertsonLeather Lanyard: Brown plaited leather lanyard with a brass swivellocal history, costume, male ceremonial, port fairy naval reserves, boxer rebellion, s.s.casino, belfast and koroit steam navigation co.

Used by the Belfast and Koroit Steam Navigation Company in the course of their business being a stamp to legitimise contracts and deals A metal Company seal for the Belfast and Koroit Steam Navigation CompanyThe Belfast and Koroit Steam Navigation Company Limited- picture of sailing shiplocal history, commerce, office equipment, stationery, belfast/port fairy, s.s.casino, s.s.dawn, s.s.coramba

Used in the office of the Port Fairy Butter Factory which was located on Gipps Street facing the end of Bank Street.Black cast iron seal with wooden handle. Decorated with gold designPort Fairy Cheese and Butter Factory Company, Port Fairy Limitedport fairy cheese and butter factory company, port fairy dairy farming, butter, factory, gipps street, company seal

South Beach Development south beach, development, road, road making, equipment, street

South Beach Development Coloured photograph of Drainage works with pipes at the left and large machine 410/F (sticky label now removed 2021)south beach, development, earth works, equipment, digger

Pt Fairy Manual Telephone Exchange 1976Two coloured photographs mounted on a single green card The Port Fairy Manual Exchange circa 1976telecommunications, telephonists, equipment

Three of the Telephonists at the telephone exchange in the Post office building in Sackville Street.Black and white photograph of two males and a female gathered around the telephone exchange deskTELE EX PF 1927_0001telephones, telephonists, port fairy, telephone exchange, equipment

Since their Australian introduction in the early 20th century, public telephones have undergone several design iterations; diversifying methods of payment from coin to card, incorporating solar charging, mobile charging and Wi-fi access and of course, mitigation against vandalism. This model, a coin-operated Gold Phone, replaced the easily pilfered Red Phone and was succeeded by the Blue Phone in the 1990s. Although the prevalence of public telephones has decreased alongside the increase in mobile phone usage, public telephones remain under Telstra’s universal service obligation as vital communications infrastructure for low-income citizens and those needing to communicate in disasters. According to the Conversation, 13 million calls are made annually from public payphones, 200,000 of which are to triple zero.Orange plastic cased public payphone with button dials on face.public telephone, payphone, public services, telecom