Showing 1482 items
matching weights.
-
Ballarat Tramway Museum
Uniform - Clothing Docket, David Klein Pty Ltd, 1970's?
Pre printed clothing issue docket or form on light weight light grey colour card for issuing of uniform to tram crews. Form printed for David Klein Pty Ltd of 23 Lincoln Square South, Carlton 3053. Gives Order, Location, item, name, style and measures and type of garment. Issued to M. Cahill, No. 48 of Ballarat, Motorman/Conductors Tunic and has seven different measurements type or handwritten on the card. Has been folded, torn and mended with tape. Colour copy made for display cabinet - 20-07-2011tram, trams, david klein, clothing, uniforms, sec -
Wodonga & District Historical Society Inc
Album - Hume Reservoir Australia Album - View along the face of the quarry, August 1927, 1927
This set of photos is from a leather bound album bearing the inscription "HUME RESERVOIR AUSTRALIA" plus 'The Rt. Hon. L. C. M. S. Amery, P. C., M .P.' all inscribed in gold. It was presented to The Rt. Hon. L. C. M. S. Amery, P. C., M. P, Secretary of State for Dominion Affairs on the occasion of his visit to the Hume Reservoir on 2nd November 1927. This album is of local and national significance as it documents the planning and development of the Hume Reservoir up to 1927. It was the largest water reservoir in the British Empire. The album records the pioneering engineering work that went into its construction.DEPARTMENT OF PUBLIC WORKS, N.S.W. RIVER MURRAY WATERS SCHEME. HUME RESERVOIR. 35. Quarry. View along the face of the quarry. Granite is being quarried here for the concrete material. Blocks from 2-8 tons in weight are reserved for “plums”. Quantities of large size spalls are sent to Victoria for the toe of the embankment and other purposes but the greatest proportion of the stone is crushed at the quarry to 2½ inches gauge for concrete aggregate. Two steam navvies and two steam travelling cranes are at work on the face. New South Wales. August 1927.hume reservoir australia, river murray waters scheme, hume reservoir construction -
Melbourne Tram Museum
Newspaper, The Age, "Easier riding on the Z3", 26/09/1979 12:00:00 AM
Newspaper clipping from The Age 26 September 1979 about the launch the previous day of two Z3 class trams in Melbourne, titled "Easier riding on the Z3". Reg Item 590 for the launch pamphlet. From researching the Author, appears he worked for The Age at the time. Gives details of the tram, first time users views, comparisons with previous trams, quotes the Board Chairman Dudley Snell. Has a floor layout and a comparison table with other trams including dates, sizes, seats and weights. Shows the seated conductor and the two exits.trams, tramways, z3 class, new trams, new tramcars, mmtb -
Waverley RSL Sub Branch
Shell 40 Cal
The Bofors 40 mm gun, often referred to simply as the Bofors gun, is an anti-aircraft/multi-purpose autocannon designed in the 1930s by the Swedish arms manufacturer AB Bofors. It was one of the most popular medium-weight anti-aircraft systems during World War II, used by most of the western Allies as well as by the Axis powers. The shells were manufactured according to a British design after it was discovered that the Swedish shells had much too sensitive a contact fuse, "which functioned on impact with rain drops". Although the shells could nominally reach out to 11,000 yards (10,000 meters), almost all the shells manufactured had self-destroying tracers that detonated the rounds at a range of 4000-5000 yards (3700-4600 meters.) This helped prevent friendly fire incidents or other collateral damage. In addition to the TNT bursting charge, the shell contained a pellet of powdered magnesium and aluminum as an incendiary. Production of ammunition peaked at 12 million rounds per month in the winter of 1944. Ammunition type Contact fused HE/incendiary fixed shell. AP shells were also available. Projectile weight 1.985 lb 0.80 kg Velocity 2890 feet/s 881 m/s Maximum elevation 90 degrees Range 11,000 yards 10,000 meters Altitude 22,800 feet 6950 meters Rate of fire 120 rounds per minuteCollected by Norman Hall D.J Hall 17455 RAN2 shells (complete) for a Bofors 40mm Anti Aircraft Gun used by the R.A.N.See Imagesbofors 40 mm, anti aircraft gun, shell, r.a.n. bofors gun, world war ii, wwii, norman hall -
4th/19th Prince of Wales's Light Horse Regiment Unit History Room
Transmission Assembly, Ferret Scout Car, Daimler, c 1950
The Ferret Scout Car , was developed by the British Army in the late 1940s and came into production in the 1950s. The Ferret first saw service in the British Army in 1952, and a little later in Australia. There were many series and Marks of the Ferret. In Australia two were primarily used. The Mark1, which had no turret and a crew of three, and the Mark2, with a turret and a crew of two. The Australian Army used the Ferrets as scout cars until the 1960s, they were disposed of by public auction in the early 1970s. The Ferret is a light armoured car, intended for light reconnaissance work, they are very mobile and were well suited to their role. The vehicle was designed by Daimler, as a further development on the successful Daimler Dingo of WW2. The Ferret is fully armoured and the standard model of the Ferret Mk2 was further strengthened shortly after its design and became the Mk2/3 (this is the usual model referred as the Mk2). The motor was Roll Royce B60 motor, giving the vehicle a power to weight ratio of 29.35 break horse power per tonne, the vehicle weighs 3.6 tonnes, although a combat weight would be 4.3 tonnes. It is four wheel drive, constant, and has a top speed of 93 k.p.h. (approx 50 m.p.h.). Fuel consumption is only about 34 litres per kilometer. The Ferret is 3.8 metres long by 1.9 metres wide and is 1.9 metres high, not including radio aerials. The ground clearance is .33 of a metre and the track width is 1.5 metres.Ferret Scout Car - B60 No 1 Mk 6A transmission assembly incorporating engine, fluid coupling, gear box and transfer box.Engine Number 12993 List Number 35418 Modification plate marked to Mod 3. ferret scout car, transmission -
4th/19th Prince of Wales's Light Horse Regiment Unit History Room
Transmission Assembly, Ferret Scout Car
The Ferret Scout Car Mark 2, was developed by the British Army in the late 1940s and came into production in the 1950s. The Ferret first saw service in the British Army in 1952, and a little later in Australia. There were many series and Marks of the Ferret. In Australia two were primarily used. The Mark1, which had no turret and a crew of three, and the Mark2, with a turret and a crew of two. The Australian Army used the Ferrets as scout cars until the 1960s, they were disposed of by public auction in the early 1970s. The Ferret is a light armoured car, intended for light reconnaissance work, they are very mobile and were well suited to their role. The vehicle was designed by Daimler, as a further development on the successful Daimler Dingo of WW2. The Ferret is fully armoured and the standard model of the Ferret Mk2 was further strengthened shortly after its design and became the Mk2/3 (this is the usual model referred as the Mk2). The motor was Roll Royce B60 motor, giving the vehicle a power to weight ratio of 29.35 break horse power per tonne, the vehicle weighs 3.6 tonnes, although a combat weight would be 4.3 tonnes. It is four wheel drive, constant, and has a top speed of 93 k.p.h. (approx 50 m.p.h.).Fuel consumption is only about 34 litres per kilometer. The Ferret is 3.8 metres long by 1.9 metres wide and is 1.9 metres high, not including radio aerials. The ground clearance is .33 of a metre and the track width is 1.5 metres.ferret scout car, transmission -
Melbourne Tram Museum
Administrative record, "Particulars of single truck cars - and scrapping order", 4/1927
Report or list titled "Particulars of single truck cars & Suggested order in which they should be scrapped" Dated 26/4/1927. Seems that the 3rd and 4th sheets were initial drafts while the 1st and 2nd the later version, though still with some corrections. Lists car (tramcar) numbers, No. of cars, seating capacity, wheel base, horse power, type of car body - lists class, type of truck and type of equipment. The 3rd and 4th sheets also gave the weight in tons. List the cars that had already been scrapped. The S and T class cars were to last in service until the 1950s.Yields information about the MMTB single truck fleet in 1927.Set of four typed foolscap sheets, carbon copies some with handwritten notes.tramcars, mmtb, scrapped trams, single truck cars, four wheel trams, list -
Kew Historical Society Inc
Book, Brown, Prior, Anderson Pty Ltd, The Australian Soldiers' Pocket Book : Containing useful information for Australian soldiers, 1940
Booklet produced in 1940 for members of the 2nd AIF by the Australian Comforts Fund Victorian Division. The 128-page pocket-sized book could be carried everywhere and provided Australian soldiers with a wide range of useful information about the requirements of war service and many other important details such as: The Laws and Customs of War - including Geneva Convention guidelines, notes on spies and insignia of rank; Things a Soldier should Know - including over 60 points; Signaling - including flags, morse code, shipboard bell times and time zone; Decorations Awarded to Australians in the Great War; Arabic and Japanese words; First Aid for gas injuries etc.; Australian Historical Events, facts and figures etc.; and Conduct Overseas - including expectations of behaviour when representing Australia. non-fictionaustralian comforts fund (victoria), second world war 1939-1945, hugh george ferguson -
4th/19th Prince of Wales's Light Horse Regiment Unit History Room
Medal, J Williams, Visit of Prince of Wales 1920, 1920
In 1920 the Prince of Wales visited Australia to extend official thanks for its support during World War I and to strengthen links to the Empire. The Prince toured extensively, and his tour was one of the most popular royal visits ever. Wherever he went public holidays were declared, foundation stones laid, memorials unveiled and receptions and balls. The Prince made a point of meeting ex-servicemen and women. He spent nine days in Victoria, eleven days in New South Wales, four days in Tasmania, eleven days in Western Australia, six days in South Australia and eight days in Queensland. The Prince was seen as the embodiment of the White Australia, symbolic of the spirit of his race. His presence strengthened the identity of the young Australian nation as a member of the Empire, resisting the influence of other powers and other races.Dimensions: 27 mm (Diameter) Weight: 9.11 g Dimension Comment: 32 mm height to top of loop Obverse Description: 3/4 bust of Prince in uniform wearing cap; around in two lines, H.R.H. PRINCE OF WALES / WELCOME TO AUSTRALIA Reverse Description: Wreath of eucalypt and oak with Prince of Wales' plume at top; within, TO COMMEMORATE / THE VISIT OF / . H.R.H.. / PRINCE OF WALES / TO AUSTRALIA / . / 1920 Edge Description: Plain Inscriptions: H.R.H. PRINCE OF WALES WELCOME TO AUSTRALIA TO COMMEMORATE THE VISIT OF H.R.H. PRINCE OF WALES TO AUSTRALIA 1920 Shape: Round with loop Material: Gilt medal, prince of wales -
Federation University Historical Collection
Book, Bedford McNeill, Mining and General Telegraphic Code, 1899, 1899
McNeill's Code was arranged to meet the requirements of mining, metallurgical and civil engineers, Directors of Mining, Smelting companies; bankers; stock and share brokers, solicitors, accountants, financiers and general merchants. Bedford McNeil )Assoc. M. Inst. C.E.) was an Associate of the Royal School of Mines; Member of the Institution of Mining and metallurgy and of the north of England Institute of Mining and Mechanical Engineers; and a Fellow of the Geological Society. "OBITUARY - Mr. Bedford McNeill IT is with regret that we announce the death on September 18, due to cerebral hemorrhage, of Mr. Bedford McNeill, the well-known mining engineer, at fifty-five years of age. Apart from his high reputation as a mining engineer, Mr. McNeill’s name was almost a household word in connection with the telegraphic code compiled by him, which was issued originally in 1893, and in an enlarged and revised form in 1908. This code is employed almost without exception by mining-companies and engineers, to whose use it was specially dedicated, and other business men have found it extremely practical for cable communications. [Nature 98, 94-94 (05 October 1916)] Black hard covered book of 807 pages by Bedford McNeil. Contents include: General suggestions for using code; Morse signals, alphabet and figures; Timetable west of Greenwich; Timetable east of Greenwich; map; Alphabetical Code; Survey of Mineral Properties; Numbers; English Money; American money; Lineal measurement; Weights; Letters; Cables; banks; Finance Companies; Substitutions; Extra Code. The book includes the following advertisements: Nobel's Explosives Company; Otto Aerial Ropeways; Tabloid Medicine cases & Chests; Charleton's Report Book for Mining Engineers; Bornhardt's Electrical Firing Machine; On a page towards the front "R. Brook"morse code, mcneill, bedford mcneill, mining, noble's explosives company, otto, charleton, tabloid, bornhadt, brook, r. brook, telegraphy, morse -
Bendigo Historical Society Inc.
Document - IAN DYETT COLLECTION: AUCTION CATALOGUE - CURNOW'S NINTH GOLD NUGGET PRECIOUS METALS
Yellow catalogue with black printing for Curnow's Ninth Gold Nugget Precious Metals & Rare Coins Auction held in the George Lansell Auction Room, Cahill Chambers, View Point, Bendigo on 16th October 1982. On the front is a black sketch of Bendigo Historic Post Office. The inside contains a list of Nuggets with Lot No., Approx. Weight in Grams, Area of Find, Code, Why Buy Gold? And Note to Buyers. The left front has the Conditions of Sale and the centre front has Curnows name and a Reproduction of Curnows original Letterhead circa 1900. Sale includes nuggets from Victoria and Interstate.business, auctioneers, j h curnow & son pty ltd, ian dyett collection - auction catalogue - curnow's ninth gold nugget precious metals & rare coins auction, bolton bros pty ltd, j h curnow, j h curnow & son pty ltd, ian dyett, fred dyett -
Bendigo Historical Society Inc.
Document - MINING REPORTS - WAGES, PRICES & STAMP HEADS
Handwritten notes detailing the wages per week S'hurst year 1868, from boys to the General Manager. Also prices for tools, rope, chain, powder, candles, oil, tallow, quicksilver, leather, cleaning and packing materials, and iron and steel. Also mentioned is the weight of the stampers, their cost, the height they fall, the number of strokes per minute, the number of holes in the gratings, the horse-power to drive each stamper, the quantity of water used per stamp-head in crushing and the quantity of mercury used in the ripples per stamper and the quantity lost per stamp head per week.document, gold, mining reports, mining reports, wages prices & stamp heads, goldfields & mineral districts of victoria, r brough smyth 1869, sandhurst goldfield 1868 -
Yarrawonga and Mulwala Pioneer Museum
Baby weighing scales, Seca
Cream painted stand with a moving sprung table top attached. On top of the table sits a woven cane basket with a wooden base. The top edge of the basket is is plaited cane and painted gold. The other cane is painted white. It is lined with a piece of white towelling on which the baby would lie. Attached on the side of the base is a notched metal bar which has a sliding metal weight so the bar will balance. It is marked with 2, 4, 6, 8 etc up to 30 lb and a smaller upper bar measures ounces. There is a framed pamphlet hanging above the scales with instructions for using the scales.Ounce measures 0, 4, 8, 12, 1 (pound) Made in Germany 24767. Triangle shape with the word Seca inside -
Ballarat Tramway Museum
Functional Object - Ash Tray, Wiltshaw and Robinson, mid to late 1900's
Demonstrates domestic items manufactured soon after the establishment of the tramway systems in Ballarat.Ash Tray - white glazed on front, unglazed rear with gold edge trim, light weight China in the shape of a "spade" with an image of the intersection of Sturt St and Lydiard St from the Post Office looking at the buildings on the south side of Sturt St including the Town Hall with two electric trams and the tram lines in the view. One of the trams is hauling a trailer. Possibly made mid to late 1900's. On rear has the makers stamp of "W&R Stoke on Trent" http://nicholnack.com.au/wiltshaw-robinson-patterns/index.php - accessed details that it is the mark of Wiltshaw and Robinson.tramways, trams, ash tray, sturt st, lydiard st, town hall -
Ballarat Tramway Museum
Ephemera - Ticket/s, J.J. Miller, ESCo 1d ticket, early to mid 1920's
Ticket contained within Reg. Item 2488, page 31, One penny 1d ticket on an off white colour, light weight card stock used by ESCo c1920, Number/s I7428 and J6747, has various destinations for nipping on sides for both directions of travel. Printed by J.J. Miller Melb. Printing in black ink. J6747 has been nipped or cancelled. The ticket conditions note that the ticket must be "Bell Punched" when issued by the conductor. Note Item Not formally Numbered. Image btm2494i2 shows position on page relative to items 2494 to 2504Some inscriptions about the ticket in pencil.trams, tramways, tickets, bell punch, esco -
Ballarat Tramway Museum
Ephemera - Ticket/s, J.J. Miller, ESCo Child 1 1/2d, early to mid 1920's to 1930's
Ticket contained within Reg. Item 2488, page 31, Child 1 1/2d ticket on a light manila colour card, light weight card stock used by ESCo c1930's, Number Pb 27878, has various destinations for nipping on sides for both directions of travel. Printed by J.J. Miller Melb. Printing in black ink. Ticket has been nipped or cancelled. The ticket conditions note that the ticket must be "Bell Punched" when issued by the conductor. Note Item Not formally Numbered. Image btm2494i2 shows position on page relative to items 2494 to 2504.Some inscriptions about the ticket in pencil.trams, tramways, tickets, bell punch, esco -
Ballarat Tramway Museum
Ephemera - Ticket, State Electricity Commission of Victoria (SECV), "Tourist Ticket SEC 1/", 1937
Ticket that was contained within Reg. Item 2488, page 105, SECV - Ballarat Tourist Ticket - 1/- on light weight card, white colour - purchased on 18 May 1938, (date stamped in red on front and back), with Passengers signature "Mr Brown", written in black ink. Has six conductors punches in the right hand margin of the ticket. Has numbers "1" to "31" on bottom section of the ticket. See Reg Item 2522 for loose item, 1/- Tourist Ticket written out for Mr. Brown, ticket number A2676. Item contained within a envelope with the main object.On rear of ticket in pencil "Victoria St."trams, tramways, tourist tickets, tickets, sec -
Ballarat Tramway Museum
Ephemera - Ticket, State Electricity Commission of Victoria (SECV), "Tourist Ticket SEC 1/", 1937
SECV - Ballarat Tourist Ticket - 1/- on light weight card, manila colour with printed details in blue ink - unused, but marked "Cancelled" in red ink across the face of the ticket. Has numbers "1" to "31" on bottom section of the ticket. Has space on front for day of availability to be written in and passengers signature. Printed to be available in the three SEC Provincial systems. On rear has number A 502 stamped on top of the ticket in black ink. Has number FTY20-101 printed on the rear. See Reg Item 3060 page 8 and 9 for details of use in Bendigo.trams, tramways, tourist tickets, tickets, fares, sec -
Ballarat Tramway Museum
Photograph - Black and White photograph/s - mounted, State Electricity Commission of Victoria (SECV), 1939
Yields information about the tram decorated for the Ballarat Floral Festival of 1939. Original print of this photograph.Mounted photograph on black light weight card, of the Ballarat (SEC 1st) No. 29 decorated for the 1939 Floral festival. Paper flowers made by the wives of the tramway staff members. Photographed at depot junction. See also Reg. item 1369 for another photograph of the tram at the Depot. Tram showing "SPECIAL". On lower edge white label in ink "Decorated Tram Car. Ballarat Floral Festival. 1939". On rear of sheet has label "Official Switching on - Learmonth". Photo glued to sheet. See Reg Items 1363 for larger prints of these photographs for further details of this photograph.trams, tramways, secv, illuminated trams, decorated trams, floral tram, tram 29 -
City of Moorabbin Historical Society (Operating the Box Cottage Museum)
Tool - Hammer small sledge, c1900, c1900
A hammer is a tool consisting of a weighted "head" fixed to a long handle that is swung to deliver an impact to a small area of an object. This is a small sledgehammer whose relatively light weight and short handle allow single-handed use. It is useful for light demolition work, driving masonry nails, and for use with a steel chisel when cutting stone or metal. Among the early settlers in Moorabbin Shire were blacksmiths who made tools for the other settlers who were establishing the homes, market gardens, farms, orchards and various businesses. Early settlers were self reliant and repaired their own equipment for kitchen,dairy, farm, horses, carts using various tools . This hammer is typical of the type used by early settlers in Moorabbin Shire c1900This is a small sledge hammer with a wood handle and double sided round metal headearly settlers, market gardeners, blacksmiths, tools, building equipment, hammers, moorabbin shire, bentleigh, mckinnon, highett, cheltenham,mcewan james pty ltd, melbourne, bunnings pty ltd, -
City of Ballarat Libraries
35mm Slide, Gold discovery centenary monument, Albert Street Ballarat, circa 1950s
The Gold Discovery centenary (1851-1951) monument in its original position in Albert St, Ballarat facing Sturt St, with the original public toilets behind. The monument features a replica of the Welcome Nugget, found in 1858 and the world's largest at that time. The monument also lists the weight of gold removed from the large "deep lead" mines, with a model of surface buildings of a mine sitting on top. Mrs Bon Strange and her husband Bert were well known Ballarat residents. When Mrs Strange died some years ago, her extensive slide collection was sorted through and those relevant to Ballarat were gifted to the Ballarat Library. ballarat, vintage bus, gold mining, welcome nugget -
National Wool Museum
Taxidermy Sheep, Sir Lindsay, c1980
The Saxon Merino, as can be seen with Sir Lindsay, is physically the smallest of the Merino strains, cutting the lowest weight of wool (3-6kg); however, the Saxon Merino is without peer in the quality of fine wool produced (14 to 18 microns). This wool is prized by the textile industry, producing the highest quality cloth resulting in strong financial returns. The Saxon Merino was first imported into Australia by Eliza Forlonge. She and her family didn’t even live in Australia when she travelled to Germany to select prime Saxon sheep in preparation for her move to Tasmania in 1830. In doing so she played a fundamental role in developing Australia’s fine-wool industry.A Saxon Merino stud. Small size body and short legs with white fleece. Two horns protruding from skull. sheep, south australia, corriedale -
Wodonga & District Historical Society Inc
Accessory - Vintage Manicure Set
Home manicure sets became increasingly popular during the 1920s. The manicure tools are made of steel and the handles and case are fashioned from xylonite, a form of celluloid. Xylonite (derived from the Greek word ‘xylon’ meaning ‘wood’) is best known for use in products made by the British Xylonite Co. Ltd. Among the earliest items made from the material were knife handles, tubes and insulating materials for electric cables. Because of its light-weight and durability, xylonite became widely used in domestic items such as coral jewellery and manicure sets throughout the early twentieth century. This item does not bear a brand name but was manufactured in England c1932 This item is significant because it is representative of accessories used by women in the early part of the Twentieth century and was donated by a member of the Wodonga Community.A shell shaped manicure case made from xylonite or celluloid. The case is lined with blue velvet. The set includes nail scissors, a nail file and buffer as well as other implements. Also in the set are 2 small round containers.On back of case: Made in Englandvintage manicure set, women's accessories -
Frankston RSL Sub Branch
Pack, Equipment
Standard WW2 era Australian Army issue, pattern 1937 equipment pack made of heavy weight cotton webbing material in the standard khaki colour. This pack was carried on the wearer's back, supported by two straps worn over the shoulder. These packs were used by military personnel to carry personal equipment items whilst in the field. This pack type is square in shape and has additional straps for attaching to webbing. The front of the pack has 'NX 83432 G Siddaway' written in black. The top flap of the pack is secured by two straps which attach to brass buckles secured by canvas loops to the front of the pack.This pack is stamped with the standard Australian Dept of Defence mark and has the serviceman's name "NX 83432 G. Sidaway" -
Kiewa Valley Historical Society
Sharpener Saw Raker/Jointer, early 1900s
This raker/jointer/guage set is a sharpening tool for cross cut logging saws. The logging saws used in the early 1900's for the clearing of forests required constant sharpening of their "cutting teeth". The logging of forested areas during these times was very much a "hands on" method of either one or two men by the use of saw or hand axe. Chain saws, chain and ball(clearing) and bulldozing methods came in the mid 1900's.This particular saw sharpening method was used by surveyors laying down boundaries for the S.E.C. Victoria Hydro Electricity Scheme (1920's). This item was given to a local Kiewa Valley lad who accompanied the initial surveyors. The lad was responsible for the tendering and feeding of the surveyors "pack horses". Surveys during this period and in the dense mountainous terrain of the Victorian Alps was both exhausting and hazardous. Overnight accommodation at various log cabins was not always possible and swag/tent alternative was the "fall back" This raker/jointer saw sharpener was made in the USA (DISSTON) from cast and flat iron. The main body has been painted in orange. It has three adjustment screws on the top horizontal bar and one bolt on(adjusting) leveling platform on the bottom. The small size and weight of this saw sharpener was ideal for the travelling/mobile logger or surveyor(as in this case). The main frame resembles two towers connected by two horizontal bars and the top of the towers has a horizontal bar with adjustment screws. See KVHS 0090 (B) for setting stake wedge adjusting the rake and cutting angle and KVHS 0090 (C) for a small spanner (for adjustments).On one inner supports is stamped "DISSTON" and on the other "U.S.A."hand tool, saw, sharpening method, tree felling. -
Bendigo Historical Society Inc.
Document - MINING REPORTS - GOLD ESCORTS
Two typed copies of Gold Escorts, Some Statistics. First one is South Australia - Mt. Alexander to Adelaide for 1852 and 1853. Mentioned are number, Escort Commdr, departure and arrival, days return, parcels, weight of gold and value in pounds. For Victoria - Ballarat to Melbourne, Geelong and Mount Alexander to Melbourne for 1852 mentioning date, Govt. Gold, Private Gold, ounces and value in pounds. Escort Loadings Sample - Castlemaine 1853, ounces and cash. Escort Loadings - All areas, 1860, number of ounces and total. Also mentioned are Total Escort Loadings, Victoria for each year 1851 to 1862 in ounces and dwts.document, gold, mining reports, mining reports, gold escorts, tolmer, alford, rose, stuart, lamb, cromie, wyndham, howell, malcolm blume, l j blake -
Bendigo Historical Society Inc.
Ephemera - Sandhurst Dragons and South Bendigo Bloods Token
Sandhurst Dragons: South Bendigo F.N.C: A small gold coin approximately the size of a 50c piece. One face shows the logo of the Sandhurst Cricket Club aka The Sandhurst Dragons. The second face shows the logo for the South Bendigo F.N.C aka The Bloods. The sides of the coin show that it is made up of 4 stacked layers, each about 0.9 of a millimeter thick. Some layers show signs of separation with debris inside. Both faces are covered in a thin layer of resin which shows signs of bubbles and surface indentations. Internal structure is possibly made of light weight metal. It is possible that the layers were meant to separate but no conclusive information exists to confirm it. sandhurst dragons, south bendigo f.n.c, the bloods, south bendigo bloods, sandhurst cricket club, token, coin, bfnl, bdca -
Bendigo Historical Society Inc.
Document - NORMAN OLIVER COLLECTION: MAYOR SPEAKS 14 MAY 1965
The Norman Oliver collection. Norman Oliver was three times Mayor of Bendigo - 1950-51, 1964-65, 1970-71. Four typed pages titled 'Mayor Speaks May 14th'. Topics include : Bendigo Technical College Speech Night, visit from the Town Clerk of Timaru N.Z., the Victorian Promotion Committee and development of industry and employment in Bendigo, the need for worker housing, the sponsorship of Bendigo Apex Club of the 'Bring out a Briton' campaign, proposed Bendigo Aerodrome, Justice of the Peace issues, crude language in library books, and the weights and measures bureaucracy. There appears to be a page missing from these notes.bendigo, council, report, norman joseph oliver , councillor norman oliver. mayor of bendigo. bendigo technical college. victorian promotions committee. bendigo apex club. -
Ballarat Tramway Museum
Ephemera - Ticket/s, State Electricity Commission of Victoria (SECV), Tourist Ticket SEC 1/, 1943, overprinted 1947
Demonstrates ticketing systems in Ballarat and in particular the use of a tourist ticket to enable people to travel around the whole of Ballarat on the trams. Yields information about the ticketting system and how surplus stocks were overprinted for future use. The same ticket stock could be used in all three of the SEC provincial tramways.Set of four SECV - Ballarat Tourist Tickets - 1/- on light weight card, light manilla colour - printed originally for the years 1944, 1945 and 1946, overprinted in red ink for 1947, 1948 and 1949. See Reg. item 499 for another example of the original ticket. Printed in black ink/ Ticket Numbers BA202587, 202590, 202591 and 202600 in body of ticket. Static number (1 - 7) on left and right indicate when validated, the route used on. Each ticket has been stamped "CANCELLED" Form No. TYE 2-17 See Reg Item 4129 for further examples of the same ticket. trams, tramways, secv, ballarat, tourist ticket, tickets -
Ballarat Tramway Museum
Map, Broadbent's, "Broadbent's Official Map 177 Ballarat", c1960
Printed street map titled "Broadbent's Official Map 177 Ballarat" on a medium weight (200gsm?) card. Shows the suburbs of Ballarat, but not Sebastopol, rail lines and tram routes, schools, some churches, hospitals, parks and some features. Does not show the full length of the Lydiard St or Sebastopol tram lines. Has scale, national route numbers and distance from Ballarat PO marked on the map. In bottom left hand corner, has Broadbent's north point logo and notes that it is the 66th year of publication of road maps. Gives telephone number as MB 2021 in top right hand corner.Initials "GY" in pencil and red ink in top right hand corner.trams, tramways, map, ballarat, broadbent's, railways