Black and white photograph of diesel locomotive Edward Henty engine number 302, under glass in a timber frame.photograph, train, diesel

Black and white photo with mine engineer,Mick Amarto operating the mines engines at Central Deborah Mine, Bendigo.mining, business, central deborah gold mine

Slide. Bendigo Train in Town. The Engine is moved on rails in from the railway yards, between the Buckell & Jeffery buildings.slide, bendigo, bendigo train in town., bendigo train in town.

Slide. Bendigo Train in Town. 'R' Class 766 Engine, at rest in park near Bendigo Railway Station.slide, bendigo, bendigo train in town., bendigo train in town.

Metal toy train engine painted yellow and red with black coal scuttle at rear. (Despite inscription there is no Noddy)A Budgie toy/Noddy and his train.toys, general

Book of Pilot's Notes General. Promulgated by order of the Air Council. Contains notes on Aircraft , engines, and dealing with emergencies.

B/W. Engine G41, showing the sign "Puffing Billy Preservation Society, Beech Forest, 21-11-59", leaves the balloon loop at Beech Forest Railway Station, with guard and child hanging from the engine. A number of people are in the area, particularly two on top of a stack of timber. beech forest; railways;

Handwritten extracts mentioning the St. Mungo Battery, the Shenandoah, and the St. Mungo, E'hawk. Notes mention engine, boilers and engine & boiler housing. Also mentioned are gold yields, Dividends, Calls, battery and distance along the reef for the Shenandoah Mine and contractor erecting machinery at the St. Mungo Mine.document, gold, mining reports, mining reports st mungo shenandoah, sec mines & water supply annual report, mining machinery report p 58 & 59, st. mungo battery, shenandoah, a m s 1/6/1899 page 37, st mungo mine, 'the federal australian' extracts from mining notes s'hurst

Typed letter to Mr A Richardson from Hugh Sloane, Mount Clear, Ballarat, Vic. 3350 dated 30/5/68 thanking him for two letters and some information about the engines at the Red White & Blue Mine. He was interested to hear of such engines being installed at a gold mine and wished he could have seen them in operation. The description of the steam winding engine was most interesting and he was hoping the society could preserve some of the machinery.document, gold, red white & blue extended, red white & blue extended, letter to mr a richardson, hugh sloane, red white & blue mine, rustin & hornsby

This model was found in the collection of Bay Steamers Maritime Museum. It is not knowt who created it but it is supposed that it was constructed to educate the many masters of the Wattle in the operation of a steam engine - a not so common mode of power these days. A Bay Steamers Maritime Museum examined the model in March 2012 and discovered that is was in poor repair. Using his existing knowledge, and with reference to some historic texts, he made some repairs and returned the model to working order. Here is his anaylsis of the situation as an excerpt from the Bay Steamers Maritime Museum newsletter Steamlines May 2012 "I was confronted with a model of a steam engine used years ago as a training aid for hopeful steam engineers. Already having a knowledge of steam operations, I considered a museum write-up for that model a ‘piece of cake’. However, on turning the model’s crankshaft, the valve timing seemed ‘out of kilter’ with the movement of the piston. Problem was that the two eccentrics on the crankshaft were not properly secured to it. Eventually I fastened the two eccentrics to the crankshaft where I felt that they should be and then realized that one of them had a chain-driven valve-timing device attached. This would be adjusted while an engine was running to achieve best performance and fuel economy whilst in operation by accurately controlling the period of time during which steam under pressure from the boiler would be admitted to the cylinder and give greater time for the steam to expand in the cylinder, move the piston and turn the crankshaft and thus, drive the attached apparatus. When the valves were correctly set up it was then possible to get the model to function properly.The model comprises a green section, which is the actual the model mounted on a brown painted board. There are two parts of the model, painted white representing the steam passages, and black representing the cast- iron portions of the cylinder-block casting, and of the main valve sliding between the cylinder a second sliding valve. Of the black portions, one slides back and forth being connected to a rod which is connected to an eccentric clamped to the crankshaft and is the nearer to the flywheel of two eccentrics. This eccentric is attached to the crankshaft at an angle of 90 degrees to the crank-pin attached to the flywheel. To operate the model simply turn the flywheel by means of the handle attached to its crank-pin. A second eccentric is also attached to the crankshaft, further away from the first eccentric, and it is adjusted to operate 90 degrees from the first eccentric (that is, 180 degrees from the crank-pin) A piston (painted silver) is located in a plastic cylinder and has a piston rod which passes through one end of the cylinder, (in actual practice a steam-proof gland seals the cylinder against loss of steam) terminating in a cross-head slide between four rails guiding it. From this cross-head, a connecting rod joins the piston-rod to the flywheel via the crank-pin attached to the flywheel which is part of the crankshaft. (In actual practice, a flywheel may not be used, particularly in a multi-cylinder engine.) The white portions of the model painted nearest to the cylinder represent the two steam ports cast into the main cylinder block, whilst one section painted in between those two represents the exhaust outlet (which may be connected to a condenser to conserve water, or to the open air). The main slide valve has three white-painted portions painted thereon. It has two white-painted marks representing the steam passages to the steam ports into the cylinder, and a third section in between the other two, being that part of the valve through which exhaust steam passes in line with the ports in the cylinder block. By rotating the flywheel, the operations of an engine will be observed as steam is admitted to the main valve via the gap between the two jaws of two moveable portions of a second sliding valve which is operated by the second eccentric attached to the crank-shaft. This eccentric is used to finely tune the valve timing of this model to obtain best running results of an engine. There are various methods used for reversing a steam engine. model compound steam engine, steam engine, model, crankshaft, valve, flywheel, wattle, engineer, eccentrics

This message concerned the P.S. Curlip's entry to the Snowy River Lakes Entrance. It was logged at 2:45 and received at 2:47.This item is associated with the P.S. Curlip and the Richardson family, early Orbost pioneers.A white paper telegram with blue print and details hand-written in black ink. It has been sent fro Orbost to "Allen Richardson Marlo". The handwritten message is difficult to decipher."You may enter - engine driver Curlip within two miles outside Entrance Snowy River."telegram-richardson-curlip communications-19th-century

A temporary saw-mill in the central Grampians.Photo shows a clearing containing a saw mill. There is a saw with traction engine to the right ands a bullock wagon containing a large log to the left. There is a man to the right working with the engine, four men among the wood in the centre and two men near the wagon on the left. A large wood stump is prominent in the foreground. timber industries, logging, sawmilling

9.7 x 12.4 negative of a man sitting on a scooter with a small train engine and a small engine? In front of him. He is in front of a brick building with a sign on the door. The sign reads - J. Kahland Wine Merchant. Negative contained in a white envelope with - 'Man? J Kahland Wine Merchant' on Door.german heritage society collection - negative of a man

Plan of locomotive tank engine drawn by A. Kerr 1852. This plan is attached to canvas, and has wooden rails, top and bottom.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, locomotive tank engine, a. kerr

Historic BuildingsB/W original photo, Merryweather Fire Engine, driven by George White and horse, Warrenheip Street, 1930'sbuninyong, national bank, merryweather, fire brigade, george white, fire engine

Clear Creek Tin Mine, c.1931mines, mining, tin, tin mining, steam, engine, men, miners, machinery, clear creek, el dorado, eldorado

Manufactured R.N.A.W Perth. Ser No.55 Date :28.08.58

Colour photograph of three pre apprenticeship students putting an engine in an old holden car at Forestec, Lakes Entrance Victoriaeducation, students

This booklet contains Newspaper Cuttings & Some Photographs of the fire in 2005-2006Clear Plastic sleeve over black Plastic, white paper with three colour photographs of a bush fire and fire engine31 st December 2005 On Spine - Grampians Region Fire 2005 - 2006 Deep Lead, Halls Gap, Illawarra, Moyston, Pomonal, Stawell, Wartook, Willaurastawell

Oil Can used for oiling machinery accurately - Engine oil can - Cone oil container - Tapered cylindrical applicator nozzle - Steel construction - Nozzle screws into placeNilmachinery, maintenance, technology, tools

Aircraft recognition models were produced and painted flat black and lacked any real surface detail or markings in order to simulate a silhouette. Training purposes for both military personnel and civilians alike.1. & 2. Model Aircraft x 2 made from timber and painted black. 1. Has four engines and appears to be a "Boeing B.17 Flying Fortress", an American heavy bomber WW2. 2. Has twin engines - a "Vickers Wellington", a British, long range medium bomber WW2.Handwritten label with models - grey lead pencil. "Recognition Model used to train pilot and gunner in identification. Top. Boe's B17. Bottom Vickers Wellington". 1. Label on bottom of model - "FORTRESS"military, aircraft, training, ww2

Three auction catalogues of a sale at the Bendigo Municipal Quarries, Axedale on 2nd September, 1941 of Surplus Machinery, Plant, Buildings and Equipment comprising Crude Oil Engine, Diesel Engine, air Receiver, Crude Oil Tank, Stone Hoppers Buildings, etc. J. H. Curnow & Son were the auctioneers.business, auctioneers, j h curnow & son pty ltd, ian dyett collection - auction catalogue - bendigo municipal quarries - axedale, j h curnow & son, j l jamieson & co, the cambridge press