The SECV continually updated their mapsDuring the development of the KHES the SECV had to continually update their mapsBoth Foolscap 1. Titled: High Plains Access Tracks & Roads 2. Mt Beauty Street Plan by SECV with Section Nos. and house numbersBoth have sticky tape marks on their back.khes maps

Doctor Horace Iles Holmes was born at Launceston Tasmania 09/08/1877. He was educated at Launceston High School and Tasmanian University and later at Melbourne University. After graduation he came to Warrnambool in 1905 and worked in the practice of Dr T F Fleetwood and took over the practice shortly afterwards along with the position of Honorary medical officer at Warrnambool Hospital and also health officer until 1944 and as an Honorary consulting medical officer from then until 1958. His practice which was located at " Ierne" opposite the Presbyterian Church in Spence St Warrnambool. He later moved to a new home and surgery at the corner of Spence Liebig st and Raglan parade which was later sold to Dr C B Berryman. A large medical clinic still operates from this site. Dr Holmes was a keen fisherman and a member of Rotary serving as district governor.This plate is a connection to a long standing doctor in the Warrnambool district. In his practice he would have treated many district people and as such this item has strong social and historical connections to the district. Rectangular brass plate engraved with name which has been coloured in black. There are six screw holes around the outer edge of the plaque. The back is plain .H.I. Holmes M.D. Surgeon & Physician. A stamped name at middle bottom edge is unreadablewarrnambool, warrnambool doctors, dr h i holmes, warrnambool history

Hard Cover. Dark Blue Plain Front, Title/Editor on Spine Damaged Dust Cover inside front Cover (see Media DSCF6192.JPG)Editor Norman Bartlett Publisher Australian War Memorial Canberra ACT

Councilor M.J.Ryan,(J.P.),was first elected as a member of the Ballarat Shire Council on the 30th. August 1897, serving until 1915. He was then re-elected in 1918 and served until1953. He was appointed Shire President in 1902-08-14-23-32-38-44-50.Original Historic photo.Sepia Photo of Councilor M.J.Ryan,(J.P.),set in a dark Brown plain wooden frame with gold trim on inside of frame.photo surounded by dark brown mount. Councilor M.J.Ryan (J.P.). First elected a member of the Ballarat Shire Council on 30th August 1897.Appointed Shire President 1902-08-14-23-32-38-44-50.ballarat shire council, ryan m j j p, 1897 1950

The Process of Making Pottery Decorating, Firing, Glazing, Making, Technical There is a rhythm and flow to clay. It can’t be done all at once! Even the making process! It can take weeks to get everything done, especially if you can only work on your pottery once a week! Even though we have three hour classes, it’s often just not enough time! Here is an overview of some of the processes so you have a bit more grasp on some of the technical stuff! Step One – Design There are SO many ideas out there for making stuff in clay! From delicate porcelain jewellery, through to heavy sculptural work and everything in between. Deciding your direction is sometimes not that easy – when you first start, try everything, you will naturally gravitate to the style that you enjoy! The options and variations are endless and can get a wee bit overwhelming too! Check in with me before you start to ensure your ideas will work, what order you might do things, how you could achieve the look you are seeking and any other technical data required! Step Two – Making Clay is thixotropic. This means that as you work with it, the clay first gets sloppier and wetter, before is begins to dry in the atmosphere. For most things, you simply can’t do all parts of the project at once. An example of work order might look like: Get last weeks work out from the shelves Prepare clay for today’s work – roll your clay, prepare balls for throwing, make the first stage of a pinch pot) Clean up last week’s work and put it on the shelf for bisque firing Check that you have any glazing to do – and do enough of it that you will have time to finish your main project Do the next step of your next project – there might be a further step that can’t be complete immediately, in that case, wrap your work well and put onto the shelves. Letting your work rest for a while can really help keep your work clean and professional looking. Many things require bagging under plastic to keep it ready for work the next week – put your name on the outside of the bag so you can find your work easily. We have stickers and markers. Consider how you want to decorate your work – coloured slip can be applied at a fairly wet stage (remembering that it will make your work even wetter!). Trying to apply slip to dry clay won’t work! If you want to do sgraffito – you will need to keep the work leather hard (a state of dryness where you can still work the clay with a little effort and a little water and care). Step Three – Drying Most of the time your work can go into the rack uncovered to let it dry out for the following week. If you want to continue forming or shaping you will need to double bag your work – put your work on a suitable sized bat and put the bat in a bag so the base of the bag is under the bat, then put another bag over the top of the work and tuck the top of the bag under the bat. If you want to trim (or turn) your thrown work the following week, it should also be double bagged. If your work is large, delicate, or of uneven thicknesses, you should lightly cover your work for drying. When considering the drying process, bare in mind the weather, humidity and wind! The hotter and dryer, the faster things dry and work can dry unevenly in the shelves – this can lead to cracking – another time to lightly cover your work for drying. Step Four – Trimming and Cleaning Up Your work is dry! It is called greenware now and it is at it’s most fragile! Handle everything with two hands. I often refer to soft hands – keep everything gentle and with your fingers spread as much as possible. Try to not pick up things like plates too much, and always with both hands! Before your work can be bisque fired it should be “cleaned up”. You work won’t go into the kiln if it has sharp edges – when glazed, sharp edges turn into razor blades! Use a piece of fly wire to rub the work all over – this will scratch a little so be light handed. Use a knife or metal kidney to scrape any areas that require a bit more dynamic treatment than the fly wire offers! Finally, a very light wipe over with a slightly damp sponge can help soften and soothe all of your edges and dags! Trimming thrown work: If you are planning to trim (or turn) your thrown work (and you should be), make sure you bag it well – your work should be leather hard to almost dry for easiest trimming. Use this step to finish the work completely – use a metal kidney to polish the surface, or a slightly damp sponge to give a freshly thrown look. Wipe the sponge around the rim after trimming, and check the inside of the pot for dags! Trimming slip cast work: Usually I will trim the rims of your work on the wheel the following day to make that stage easier, however you will still need to check your work for lumps and bumps. Last but not least – check that your name is still clearly on the bottom of your work. Step Five – Bisque Firing When the work is completely dry it can go into the bisque kiln. The bisque kiln is fired to 1000°C. This process burns off the water in the clay as well as some of the chemically bound water. The structure of the clay is not altered that much at this temperature. Inside the bisque kiln, the work is stacked a little, small bowl inside a larger bowl and onto a heavy plate. Smaller items like decorations or drink coasters might get stacked several high. Consideration is paid to the weight of the stack and shape of the work. A bisque kiln can fire about one and a half times the amount of work that the glaze kiln can fire. The firing takes about 10 hours to complete the cycle and about two days to cool down. Once it has been emptied the work is placed in the glaze room ready for you to decorate! Step Six – Glazing Decorating your work with colour can be a lot of fun – and time consuming! There are three main options for surface treatment at this stage: Oxide Washes Underglazes Glazes Washes and underglazes do not “glaze” the work – It will still need a layer of glaze to fully seal the clay (washes don’t need glaze on surfaces not designed for food or liquid as they can gloss up a little on their own). Underglazes are stable colourants that turn out pretty much how they look in the jar. They can be mixed with each other to form other colours and can be used like water colours to paint onto your work. Mostly they should have a clear glaze on top to seal them. Oxides are a different species – the pink oxide (cobalt) wash turns out bright blue for instance. They don’t always need a glaze on top, and some glazes can change the colour of the wash! The glazes need no other “glaze” on top! Be careful of unknown glaze interactions – you can put any combination of glaze in a bowl or on a plate, but only a single glaze on the outside of any vertical surface! Glazes are a chemical reaction under heat. We don’t know the exact chemicals in the Mayco glazes we use. I can guess by the way they interact with each other, however, on the whole, you need to test every idea you have, and not run the test on a vertical surface! Simply put, glaze is a layer of glass like substance that bonds with the clay underneath. Clay is made of silica, alumina and water. Glaze is made of mostly silica. Silica has a melting point of 1700°C and we fire to 1240°C. The silica requires a “flux” to help it melt at the lower temperature. Fluxes can be all sorts of chemicals – a common one is calcium – calcium has a melting point of 2500°C, however, together they both melt at a much lower temperature! Colourants are metal oxides like cobalt (blue), chrome (green through black), copper (green, blue, even red!), manganese (black, purple and pink) iron (red brown), etc. Different chemicals in the glaze can have dramatic effects. for example, barium carbonate (which we don’t use) turns manganese bright pink! Other elements can turn manganese dioxide brown, blue, purple and reddish brown. Manganese dioxide is a flux in and of itself as well. So, glazes that get their black and purple colours, often interact with other glazes and RUN! Our mirror black is a good example – it mixes really well with many glazes because it fluxes them – causes them to melt faster. It will also bring out many beautiful colours in the glazes because it’s black colouring most definitely comes from manganese dioxide! Glaze chemistry is a whole subject on it’s own! We use commercial Mayco glazes on purpose – for their huge range of colour possibilities, stability, cool interactions, artistic freedom with the ability to easily brush the glazes on and ease of use. We currently have almost 50 glazes on hand! A major project is to test the interactions of all glazes with each other. That is 2,500 test tiles!!!! I’m going to make the wall behind the wheels the feature wall of pretty colours! Step Seven – Glaze (Gloss or sometimes called “Glost”) Firing Most of the time this is the final stage of making your creation (but not always!) The glaze kiln goes to 1240°C. This is called cone 6, or midrange. It is the low end of stoneware temperatures. Stoneware clays and glazes are typically fired at cone 8 – 10, that is 1260 – 1290°C. The energy requirement to go from 1240°C to 1280°C is almost a 30% more! Our clay is formulated to vitrify (mature, turn “glass-like”) at 1240°, as are our glazes. A glaze kiln take around 12 hours to reach temperature and two to three days to cool down. Sometimes a third firing process is required – this is for decoration that is added to work after the glaze firing. For example – adding precious metals and lustres. this firing temperature is usually around 600 – 800°C depending upon the techniques being used. There are many students interested in gold and silver trims – we will be doing this third type of firing soon! After firing your work will be in the student finished work shelves. Remember to pay for it before you head out the door! There is a small extra charge for using porcelain clay (it’s more than twice the price of regular clay), and for any third firing process! Once your work has been fired it can not turn back into clay for millennia – so don’t fire it if you don’t like it! Put it in the bucket for recycling. https://firebirdstudios.com.au/the-process-of-making-pottery/ This bowl is an example of kitchenware used in the 19th century and still in use today.Bowl white ceramic plain that has two sets of edging around lip. Inside bowl has plaster designed to look like cooking mixture.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, kitchen equipment, ceramic

This blazer was worn by Tom Hill in 1947. He was educated at Digby Primary School and Hammilton High and was appointed principle of Paschendale P.S. and Kannagulk P.S. at the age of 17 before he entered the College at Dana Street. He graduated in 1948 and was appointed to the Myrtle Creek school. At the time of his retirement in 1986 he was principle of Bacchus Marsh P.S. The Ballarat Teachers' College was established after the Victorian State Government and the State Education Department decided to establish two provincial teachers' colleges, at Ballarat and Bendigo. On 04 May 1926 W.H. Ellwood (Principal), Miss A. Bouchier, and Mr A.B. Jones, welcomed the first enrolment of 61 students to undertake the one year course. In 1927 the College moved to the former Ballarat East Town Hall in Barkly Street, which was remodelled for their use. It closed in December 1931 due to the Great Depression. In 1946 Ballarat Teachers' College reopened and relocated to the Dana Street State School. It was originally planned to open as a women's college, for whom the residence at 130 Victoria Street was purchased, but the decision was made to admit resident men from Ballarat. Mr T.W. Turner was appointed as Principal in 1951 and directed the introduction of a two year course for the Trained Primary Teachers' Certificate. The former one year course was terminated at the end of 1951. In 1958 the College was relocated to a custom built facility at Gillies Street, in close proximity to the Ballarat Botanical Gardens. Numbers increased with the introduction of the Trained Infant Teachers' Certificate course under the guidance of Mary Egan. With the introduction of a three year Diploma Course in 1968 accommodation became cramped. The introduction of the Diploma of Teaching (Primary) led to the Trained Infant Teachers' Certificate being discontinued in 1969, and the end of the Trained Primary Teachers' Certificate in 1969. Secondary Art and Craft students began studies at Ballarat Teachers' College in 1969 under Mr Ted Doney. In 1971 Mr D. Watson was appointed Principal. The State College of Victoria was proclaimed by Order in Council on 24 July 1973, and Ballarat Teachers' College became a constituent college of the State College of Victoria, and was known as State College of Victoria, Ballarat. By 1975 the College moved to Mount Helen as part of the Ballarat College of Advanced Education. Pre service teachers currently undertake their studies on the Mount Helen Campus of Federation University. ("Ruffians Attempted to Carry of the School Tent: A History of State Education in Ballarat", 1974, p73-4.)Blue satin lined, wool gabardine Ballarat Teachers' College blazer with embroidered pocket. The jacket has two plain silver coloured buttons at the frontEmbroidered emblem of the Ballarat Teachers College.ballarat teachers' college, blazer, tom hill, thomas hill, costume, uniform, embroidery, textiles

Copy of a Telegram dated 2nd March 1968 to paretns of 3789448 Private Douglas Brian plain notifying them of his death as a result of a vehicle accident.Telegram marked URGENT Certificate of Death (overseas)certificate, death certificate, pte plain

Made by internee, Rosa Rubitschung, at Internment Camp 3, Tatura.Handknitted woollen black dress , with belt. black shank buttons & white material collar. Plain knitting with full length centre panel which is patterned.rosa rubitschung, ladies dresses, internment camp hand crafts

Plain paper, folded, 7 Documents. 3 - Accounts. 3 - Variation of Salary. 1- Invitation to opening of Campaspe Pumping Station. Fullscap size papernon-fictionDocuments for Goulburn Valley Water major works constructionaccounts, salaries, invitation

This volume is hand printed in a calligraphical style using black ink. It includes a full colour drawing of the Williamstown High School logo of 1970.It details the history of the old drill hall, includes a photograph and explains the process of funding and building the new hall. The book also includes Members of the Advisory Council 1968-1971; participants in the first official assembly in the new school hall in 1972, signatures of all those present at the official opening; program of the unveiling of the plaque ceremony, 1975.Dark green leather bound volume, plain paper book. Memento of the old drill hall, demolished in 1969, to make way for a new school hall.drill hall, williamstown high school, 1960s, 1970s, opening ceremony

Set of 5 SEC decimal tickets found in a tramcar, 28, 1/1999, No. 1 end north side. Tickets have been used and are generally in a good condition. The image file shows the nature of the damage. Tickets have not been individually numbered with the Registration Number, but can be identified by their ticket number and denomination. All on white paper unless otherwise noted. 1d - 20 003395 - black ticket with 1d and "20" in ticket number in red, plain back 1 1/2d - G 112769, black ticket with 1 1/2d in red, plain back 2d - 17 009376, blue ticket with 2d and "17" in ticket number in blue, plain back - ticket in two halves, very dirty. 3d - C 284 166, black ticket, with 3d in blue, plain back. 4d - R? 691329, brown ticket, with tartan backtrams, tramways, tickets, used tickets, secv, ballarat

Book with tan coloured cardboard cover, 20 internal pages. Pages 3 to 14 are text while pages 15 to 20 contain pictures, including how to properly wear a uniform. Is showing some signs of wear, with worn edges of cover, and stains on the front and back covers, pages are in good condition with very little yellowing.Cover is plain tan. First internal cover has insciption: Melbourne And Metropolitan Tramways Board (MMTB logo) A Brief Summary of the Essential Features of Your Job Caution + Commonsense = Safetybook, mmtb, m&mtb, melbourne & metropolitan tramways board, conductor, how to become an efficient conductor

Found by Kerrie Estough at a market at Cecil Plains, Canberra. Contacted Keith Russell who donated on her behalf.Coloured pencil drawing/sketch of young lady with short blond hair, looking to her right. Blue and white frill top. Picture in cream frame and under glass.on bottom right of picture: Kurwin 1948 To Robyn from Kurt Winklerkurt winkler, kurwin, kerrie estough, cecil plains canberra, keith russell

Western plains of southern New South Wales provided good training areas for a unit practicing reconnaissance tasks.Colour photograph of four 8/13 Victorian Mounted Rifles soldiers on an M113 Light Reconnaissance Vehicle ( LRV ) during Annual exercise at Balranald NSW. From left: Lance Corporal lM. Roberts, Captain T. Fraser, Lieutenant T. Goode and Trooper Bone.

Booklets are the "OFFICIAL JOURNAL/ B.C.O.F. ASSOCIATION OF AUSTRALIA / since 1972/ Navy, Army, Air Force, Woman's & Auxiliary Forces." BOOKLETS - Items in the Collection of Richard William McGILVERY, RAAF. refer Cat No. 7287P for his service details, photo, awards.SOFT COVER BOOKLET. Cover - paper, black print on front and back on white paper. 2, Red print decorative frame/ border. Illustrated with the "BRITISH COMMONWEALTH FORCES", logo with crown. 1. 14 pages - cut, plain, white paper. Illustrated black and white photographs. 2. 40 pages, cut, plain, white paper. Illustrated - black and white photographs and cartoons.1. Front cover - white adhesive label, handwritten black ink "2003 to 2007/ lots missing". 1. "Shinbun Rocku Ban" No. 6 February 1982. 2. "Shinbun" No. 32 December 1988.history, booklets, bcof

MEYER COLLECTION - FALLS CREEK PHOTOS In 1947 a determined group of like-minded State Electricity Commission (SEC) staff including Ray Meyer, the chief surveyor of the Kiewa Hydro-Electric Scheme, had a common interest that revolved around the skiing potential of the snow-covered high plains which included what is now the resort of Falls Creek. The six SEC employees, Toni St Elmo, Ray Meyer, Jack Minogue, Lloyd Dunn, Adrian Ruffenacht and Dave Gibson (together with their families) banded together to secretly build a 'hut' that was the first ski lodge at Falls Creek. Using a road built in 1930s to gain access to Falls Creek, their hut project was carried out in secret as efforts by other skiers were blocked by H.H.C. Williams – the engineer in charge of the Hydro Scheme. In 1946 Ray Meyer made a trip to the Lands Office in Melbourne. He came away with a 99-year lease on three acres that was ideally suited for a hut designed by Lloyd Dunn. Adrian Ruffenacht (Design Engineer for the KHS) had suggested where the group should build because of easy access to a spring for water. Much of the building material required was scavenged from derelict huts on the high plains. Due to the need for secrecy, the determined group worked on the hut in the evenings and weekends to avoid detection. During the building period the group had met at Echidna Rock (now known as Eagle Rock) where Skippy St Elmo announced, "This is my favourite ‘Skyline’.” And so the first lodge in the area at Falls Creek Ski Resort came into existence. With the development of the International Poma in the 1970s, the Skyline Lodge, which was sited between the ski-lift’s pole one and pole two, was demolished. However, the legacy of Ray Meyer, Toni St Elmo, Jack Minogue, Lloyd Dunn, Adrian Ruffenacht and Dave Gibson and Skyline lives on in the vibrant atmosphere of Falls Creek Resort. The MEYER COLLECTION documents developments on the Kiewa Hydro Scheme and their life at Falls Creek from the mid 1930s to 1960s.These images are significant because they depict aspects of the life of a pioneering family of Falls Creek and the founders of "Skyline", the first lodge at Falls Creek.Two black and white images of Ray Meyer outside Roper's Hut. Frederick Roper and his family grazed the Bogong High Plains from the 1890s until 1908. Frederick "Jack" built three huts. The hut known as Roper’s Hut was built on Jack's new grazing lease after his former run had been acquired by the SEC in the late 1930s. It had become a well-used refuge hut prior to its destruction in the 2003 bushfires. It was rebuilt by Victorian High Country Huts Association in 2008.falls creek, building skyline, skyline founders, toni st elmo, adrian ruffenacht, jack minogue, ray meyer, lloyd dunn, david gibson

These collars were worn by Mr Whiteman, Marjorie Burton's father, until he died in 1972. Marjorie Burton ( nee Whiteman), born 12 June, in Birmingham, England came to Orbost in 1995. She came from a middle-class working church-going family. Her father served in Civil Defence during WW11. A detachable collar was a shirt collar separate from the shirt, fastened to it by buttons. The collar was usually made of a different fabric from the shirt and was almost always white and specially starched to a hard cardboard-like consistency. detachable collars were a better way to clean and starch a collar for business or formal wear. As more emphasis started to be placed on comfort in clothing wearing a detachable stiffly starched collar decline in day wear; although it is still often worn by barristers while a full dress shirt may still have a stiff detachable collar. These collars are examples of clothing which was commonly worn by businessmen in the first half of the 20th century.Four men's starched cotton shirt collars. They each have 3 button holes for attaching to a shirt. Two are white with grey stripes and two are plain white.2483.24 and 2483.25 - Trubenised reg trade mark Reg user Do not starch Iron very damp 129 4128 15 2483.26 - Patented and made in England Woven from Egyptian cotton 476035 SECONDS Van Heusen 15/38 2483.27 - Trubenised Patent registered No starch needed 15 Iron very damp collars-detachable men's-clothing accessories burton,-marjorie

Swedish snow shoes for horses were imported by Martin Romuld in 1937. They were used by Tom Fitzgerald's packhorses but not on the State Electricity Commission of Victoria's horses as a S.E.C.V. 'horse expert' claimed the horses would break their legs.Tom Fitzgerald lived on the Omeo Highway near Shannonvale and brought cattle up to the Bogong High Plains. He would have travelled in the snow during the year visiting his hut and maintaining his equipment. The S.E.C.V. worked on the Bogong High Plains all year round during the construction of the Kiewa Hydro Electric Scheme. Copy of a black and white photo glued onto cardboard showing a "Swedish snow shoe for horses" followed by further information re their uses on the Bogong High Plains. On the back stamped in blue 'Rescent'swedish snow shoes; horses; bogong high plains

This Warrnambool Rowing Club medal was awarded to the winners of the Society Fours in 1908. The Friendly Society group that won the race was the Manchester Unity Independent Order of Odd Fellows, a benefit society owned by members who assist other members in times of illness or unemployment. Originally founded in Manchester, England, the M.U.I.O.O.F. started in Melbourne in 1840. The Warrnambool branch was founded in 1860. The Warrnmbool Rowing Club was established in 1873, though there had been several boat clubs associated with the Hopkins River going back to the 1850s. No information has been found on R.Russell. This medal is of interest as a memento of a Warrnambool sporting club award in 1908 and of the winner of the award, a Warrnambool group and a member of that group.This circular brass medal has a shield shaped centrepiece with text on both obverse and reverse surrounded by a plain annulus edged with small scrolls. It has a ring at the top.Obverse- W.R.C. Regatta 1908 Reverse SOCIETY FOURS Won by M.U.I.O.O.F.R RUSSELL. A maker's hallmark.warrnambool rowing club, the friendly society, m.u.i.o.o.f.

Awarded to Donald Neil Symons for excellence in Scripture during his final year at Ballarat College. Neil was educated at Ballarat College (Dux 1933) and Ormond College, Melbourne University. He became a Clothing industry leader and was Fletcher Jones' distinguished successor as chief executive of the FJ organisation, and a prominent advocate for the Australian textile and clothing industries, decentralised industry and government support of employee share ownership schemes. Small, maroon leather-bound book with gold title and detailing on spine and gold school crest on front cover; plain endpapers; bookplate inside front cover.Book plate inside front covers: school crest / Ballarat College / Sixth Form / Scripture Prize / (Gift of Mrs T R Cairns) / Awarded to / D N Symons / A Richardson, BA / December 1930 Principaldonald-neil-symons, fletcher-jones, cairns

The book was “written and illustrated on Gallipoli” by the Men of ANZACCover missing, title page paper with black print, 166 pages, plain of white, illustrated, colour drawings (on plates) black and white photographs and line drawings.anzac, books,

Genuine War Letters written by an Australian to his people from the Battlefields of France. Letters dated from 15.2.1916 to 11.11.1918.Genuine War Letters - Biographical Studies. Soft lightweight cardboard cover, black print on light grey background. 288 cut, plain, beige pages. No illustrations.book, letters, genuine

Softcover, cardboard, black and white print on front, spine and back. Sepia photo of soldiers on front and spine. 600 pages, plain, illustrated with black and white photos.books, military history

Black cardboard soft cover with white silhouette of barbed wire and red teardrop shape on front. 204 pages, plain paper, cut edges. Includes illustrations.books, military history

CEMA Art Collection. Part of "A Community View" 150 years in Portland Screenprint Exhibition. Part of Angela Gee Residency 1983 and 1984.Laminated screenprint of a drawing of a building. The details of the building are done in thick black lines with patches of green, yellow and brown. The background has been left as the plain paper.Front: Darren Pumpa (lower left) Steam Packet Inn (upper centre) (pencil) Back: 50