During the 1890s the Ballarat School of Mines started teaching photography.Handwritten invoice on printed letterhead. The invoice was for chemicals and apparatus for the Ballarat School of Mines, including items for the Chemical Laboratory, Photography Laboratory, Electrical Laboratory and Cyanide.walter cornell, ballarat school of mines, laboratory, chemist, pharmacy, photography electricity, photographic equipment

'Belle' Scoring Apparatus. Crib scorer. Small Red Metal square. Approx 10cm square, with two circular rows of perforations numbered from 10 to 500. used for scoring card-games. Such as 500, Coon Can and Cribbage. “Belle”Scoring Apparatus and numbered holes (one row labelled Minus, the other Plus) on one side. The other side displays instructions for use.

Gunther Jahnke graduated in 1980. Trevor Adams graduated in 1978. Subsequently he was employed by ALCOA Australia, and by 2000 was general manager at the Portland (Vic.) plant..1) Two men, one wearing a leather jacket .2) Three men at a metallurgical apparatus .3) A handwritten note by Brian Sunter, relevant to the above photo..3) A. A group of Metallurgy students from Ballarat CAE working on equipment designed for melting metals and alloys under high vacuum conditions. (From left to right Athol Shelton, Gunther Jahnke, Trevor Adams) B. Metallurgy students operating a control panel for equipment designed to analyse crystal structure. (From left: Gunther Jahnke, Trevor Adams) alumni, brian sunter, gunther jahnke, trevor adams, athol shelton, student activity, metallurgy

This is a large metal framework covered in gauze, the whole mask completely enclosing the patient's face excluding any possibility of carbon dioxide being excreted. This object was found in the possession of the Italian Army in Libya in 1940, and donated to the museum by Dr Geoffrey Kaye. Gustave Julliard, of Geneva, after a death from chloroform had occurred in his practice, abandoned the use of that anaesthetic and adopted ether. He administered it from a large, wire frame, the outside of which was covered with waxed cloth to make it impermeable to air, the inside with surgical gauze on to which the ether was poured. Large metal wire frame mask, covered in waxed paper, with gauze wrapped around the rim to prevent ether leaking out, effectively forming a rebreathing apparatus.ether, carbon dioxide, italian army, libya, 1940

In 1941, the scientific instrument manufacturing firms of  Henry Hughes & Son Ltd, London, England, and  Kelvin Bottomley & Baird Ltd, Glasgow, Scotland, came together to form Kelvin & Hughes Ltd. Kelvin Company History: The origins of the company lie in the highly successful and strictly informal relationship between William Thomson (1824-1907), Professor of Natural Philosophy at Glasgow University from 1846-1899 and James White, a Glasgow optical maker. James White (1824-1884) founded the firm of James White, an optical instrument maker in Glasgow in 1850 and was involved in supplying and mending apparatus for Thomson university laboratory and working with him on experimental constructions. White was declared bankrupt in August 1861 and released several months later. In 1870, White was largely responsible for equipping William Thomson laboratory in the new University premises at Gilmore hill. From 1876, he was producing accurate compasses for metal ships to Thomson design during this period and this became an important part of his business in the last years of his life. He was also involved in the production of sophisticated-sounding machinery that Thomson had designed to address problems encountered laying cables at sea, helping to make possible the first transatlantic cable connection. At the same time, he continued to make a whole range of more conventional instruments such as telescopes, microscopes and surveying equipment. White's association with Thomson continued until he died. After his death, his business continued under the same name, being administered by Matthew Edwards (until 1891 when he left to set up his own company. Thomson who became Sir William Thomson and then Baron Kelvin of Largs in 1892, continued to maintain his interest in the business after James White's death. In 1884 raising most of the capital needed to construct and equip new workshops in Cambridge Street, Glasgow. At these premises, the company continued to make the compass Thomson had designed during the 1870s and to supply it in some quantity, especially to the Admiralty. At the same time, the firm became increasingly involved in the design, production and sale of electrical apparatus. In 1899, Lord Kelvin resigned from his University chair and became, in 1900, a director in the newly formed limited liability company Kelvin & James White Ltd which had acquired the business of James White. At the same time Kelvin's nephew, James Thomson Bottomley (1845-1926), joined the firm. In 1904, a London branch office was opened which by 1915 had become known as Kelvin, White & Hutton Ltd. Kelvin & James White Ltd underwent a further change of name in 1913, becoming Kelvin Bottomley & Baird Ltd. Hughes Company History: Henry Hughes & Sons were founded in 1838 in London as a maker of chronographic and scientific instruments. The firm was incorporated as “Henry Hughes & Sons Ltd” in 1903. In 1923, the company produced its first recording echo sounder and in 1935 a controlling interest in the company was acquired by S Smith & Son Ltd resulting in the development and production of marine and aircraft instruments. Following the London office's destruction in the Blitz of 1941, a collaboration was entered into with Kelvin, Bottomley & Baird Ltd resulting in the establishing “Marine Instruments Ltd”. Following the formal amalgamation of Kelvin, Bottomley & Baird Ltd and Henry Hughes & Sons Ltd in 1947 to form Kelvin & Hughes Ltd. Marine Instruments Ltd then acted as regional agents in the UK for Kelvin & Hughes Ltd who were essentially now a part of Smith's Industries Ltd founded in 1944 and the successors of S. Smith & Son Ltd. Kelvin & Hughes Ltd went on to develop various marine radar and echo sounders supplying the Ministry of Transport, and later the Ministry of Defence. The firm was liquidated in 1966 but the name was continued as Kelvin Hughes, a division of the Smiths Group. In 2002, Kelvin Hughes continues to produce and develop marine instruments for commercial and military. G. Falconer Company History: G Falconer (Hong Kong Ltd) appear to have had a retail presence in Hong Kong since 1885, according to the company website, and currently have a shop in the Peninsula Hotel. G Falconer was the Hong Kong selling agent for several British companies. Ross Ltd of 111 New Bond St London was one and the other was Kelvins Nautical Instruments. Falconers were primarily watchmakers, jewellers and diamond merchants.They were also agents for Admiralty Charts, Ross binoculars and telescopes, and sold English Silverware and High Class English Jewellery. In 1928 the company was operating from the Union Building opposite the Hong Kong general post office. It is unclear if the item is an original Sextant made by Kelvin prior to his amalgamation with Henry Hughes & Sons in 1941 as Kelvin appears to have only made compasses up to this date. If the Sextant can be established that it was made by Kelvin then it is very significant and a rare item made for and distributed through their Hong Kong selling agents G Falconer Ltd. There are many Sextants advertised for sale stating "Kelvin & Hughes 1917 model sextant". These can be regarded as replicas as the company was not formed until 1941 and production of marine instruments was not fully under way until after the war in 1947. Further investigation needs to be undertaken to accurately determine the provenance of this item. As the writer currently has the impression that the subject object was possibly made by Kelvin and Hughes in the mid to late 20th century or is a replica made by an unknown maker in the late 1970s. Purchased as an exhibition of marine navigational instruments for the Flagstaff Hill museum. The Sextant is a brass apparatus with filters and telescope lens, and comes with a wooden felt lined storage box. It is a doubly reflecting navigation instrument that measures the angular distance between two visible objects. The primary use of a sextant is to measure the angle between an astronomical object and the horizon for the purposes of celestial navigation.G Falconer and Co. Hong Kong (retailers of nautical equipmentflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, sextant, kelvin & hughes ltd, hong kong, navigational instrument, g falconer, mariner's quadrants

Field telephone set D MK V - used for sending messages in the field via voice. Serial No. 21396.Rectangular metal box with hinged lid, containing communication apparatus for sending verbal messages. Attachments on sides & rear for carrying straps. Hook & eye latch on front for securing lid.Instruction plates on inside of hinged lid. “Serial No 21396”communications - telephonic, military equipment - army, metalcraft, passchendaele barracks trust

Brought by Dutch migrants as part of kitchen apparatus.Sieve with green plastic handle and two hooks to hold sieve over bowl. Detachable Y-shaped steel frame apple sauce roller inside sieve, designed to fit over the handle and hook onto rim on opposite side, has turning handle with green wooden knob, a wooden egg-shaped roller, to force apple sauce through sieve, and metal paddle to scrape sauce from sieve. Cooked apple sauce was placed in sieve and pushed through mesh by turning handle to produce the fine apple sauce beloved by the Dutch.household item

An agreement between Lamson Engineering Co and Shire of 'Nunawading' {should be Blackburn and Mitcham}, President and Councillors to install and hire an apparatus known as the Dictograph Interconversing System consisting of 8 stations in 1937.telephones, lamson engineering co ltd, dictograph interconversing system, shire of blackburn and mitcham

C.E Barrie was the Urban brigade's first captain. November 19, 1975, Page 2 OBITUARY Ex-Captain C E BARRIE Over 50 firemen attended the funeral of Ex- Captain Edgar Barrie of Melton Fire Brigade who died at the age of 62 on Thursday 16th October, 1975. Edgar was a volunteer fireman for 33 years, all of this service with the Melton Rural and Urban Fire Brigades. He joined the rural brigade in February 1942 was Secretary 1942 until 1965 when he became Captain as position he held until 1973. He was the urban brigade’s first Captain when it was formed in 1970 and held this position until 1971. The fire service runs in the Barrie family, brother Bon was Captain of the rural brigade from 1953 to 1965 relinquishing the position to become Group Officer of the Mt Cottrell Group, a position he still holds. Another brother Tom has been a member since 1941, nephew Peter has been a member since 1962 and Edgar’s son Vivian has been a member since 1971. Firemen, led by Snr. A/C/O Max Taylor, A/C/O Harry Rothsay, R/O Arthur Haynes and retired R/O Jim Dinsdale formed a guard of honour at the church and cemetery. A/C/O Rothsay read the Fireman’s Funeral Ritual at the graveside. Edgar who was a farmer, leaves a wife and four children. Sympathy is extended to them in their loss. Six members from the Melton Urban Brigade including Captain C.E Barrie, Secretary Dale Blampied, Lieutenant Steve Hirt, Apparatus Officer Graham Quick and Foreman Barry Sherwell.local identities, emergency services

Brought to Australia by Dutch migrants as part of kitchen apparatus4219 (a), (b), (c) and (d) Shallow cream enamel bowls with green rim, straight stepped edge indented above curved sectionhousehold items

Photograph of laboratories at the Ballarat School of Mines. 1. A male person at the viewing window of a wind tunnel. The man is probably Zig Plavina 2. Three males at a glass-sides tilting flume apparatus.ballarat school of mines, laboratory, tilting flume, wind tunnel, zig plavina

This photograph was taken at Orbost Higher Elementary School circa 1918. Mr Bill Guy was the teacher in the photograph.Orbost High School / Orbost Secondary College has played a significant part in the education of senior students in the Orbost district . It is the sole senior educational institution. This item is representative of its history. A black / white photograph taken inside a classroom science laboratory. A dozen female students are involved in science activities, some holding apparatus, others sitting observing. There are shelves holding bottles at the back of the room.on back - "the science room H.S. about 1918? Mr Bill Guy HT"education-orbost orbost-higher-elementary-school guy-bill

The subject item is a good example of a large, hand-operated Bentwood box butter churn used to make up to 14 pounds of butter. It was made in Gisborne, Victoria, by the famous manufacturer, E. Cherry, and is known as an Improved Patent No.2 model probably dating from the late 1800s. The Cherry works specialised in making all types of butter churns and equipment for both domestic use on farms and small butter factories during the late nineteenth and early to mid. twentieth centuries. Milk was "separated" to retrieve the cream which was then beaten to make butter. E Cherry began making various models of Cherry butter churns in 1858, Edward Cherry migrated from Herefordshire England to Australia in 1855 with his wife Ann Appleby, nee Davis, and established a joinery workshop at Gisborne, Victoria. He began by making butter churns in his spare time and his product soon became popular allowing him to establish a viable business. A factory was established in 1875 and he started to make churns of all sizes including up to industrial scale. He exported his products to many countries around the world, Edward Cherry died in 1909 and the business was then run by his son George until he died in 1917. E Cherry's other son Thomas (1861-1945) was also involved in the firm maintaining an interest for several years. He had been born in Gisborne and became a senior house medical surgeon at the Melbourne Hospital in 1890. He continued his studies at Kings College London, eventually becoming a renowned bacteriologist and agricultural scientist. A significant item giving an snapshot into how early industrial manufacturing became established in Australia in the production of domestic and industrial dairy equipment.Butter churn wooden manually operated made by Cherry and Sons with rotating lever curved plywood basin and parallel cross beamed horizontally spoken churning apparatus inside with wooden plug at lower side of churn. Label in block transfer "E CHERRY / MAKER / GISBORN / VICTORIA / 2" "IMPROVED PATENT"warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, butter churn, wooden butter churn, e cherry & sons, dairy equipment, gisborne, food preparation

Dormia Stone Extractor with Set of instructions in French and English. This item is a tiny apparatus consisting of four wires that can be advanced through an endoscope into a body cavity or tube, manipulated to trap a calculus or other object, and withdrawn.

Black and white photograph depicting a labour ward in a hospital, with two men in business suits standing on the left of the photograph next to an nitrous oxide machine. A woman patient is lying in a hospital bed on the right, wearing a hospital gown and holding the mouth-piece of the apparatus to her face. The two men are looking down at the equipment and the man on the left, Dr Kevin McCaul, is pointing at the patient, demonstrating the use of the demand flow nitrous oxide/oxygen apparatus. A lamp is above the bed and there are curtains behind the men on the left.•Handwritten on reverse in grey pencil: 1 [in a circle] •Printed stamp in blue ink on reverse: 51 4776 / PHOTOGRAPHED BY SPECIALIZED / PHOTOGRAPHIC / COMPANY PTY. LTD. / REF. No .................... 240 CHAPEL STREET / TAKE ........................ PRAHRAN, VICT., S1 / PHONE 51 4776 / 51 1752 •Handwritten in black ink on reverse: 4874 [next to REF. No] / D [next to TAKE]nitrous oxide apparatus, demand flow apparatus, kevin mccaul, anaesthetic equipment

The FULLERPHONE was invented by Capt AC Fuller British Army to resolve a “Eavesdropping” problem by the enemy in 1915. This model was introduced in 1939 and several other MK variations followed later on.Fuller phone MKIV, green wooden box with metal hinged lid, steel strapping around box & lid. Steel handles on 2 sides. Inside is the phone apparatus. On the lid inside is metal plate with instructions on use.“Fuller Phone MKIV 2005”military equpment - communications, communications - telegraphic, fuller

This image was taken at the height of the Ballarat school of Mines world wide fame.Black and white photograph mounted onto green card showing an interior chemistry classroom at the Ballarat school of Mines. Chemicals and apparatus line one wall, and geological specimens are housed in glass cases. Posters line the wall. On lower section of photograph 'Section Chemistry Room S.M.B. mines Dept Vic.ballarat school of mines, mines department, geology, chemisty

Black & White Photograph by the TMSV Sales of a poster / drawings showing the operation of the Grip Kicker Gear - which when activated forced the cable from the grip, such as when crossing over another cable. Refers to a model of this apparatus.Has the TMSV Sales stamp on rear.trams, tramways, cable trams, grip tram, cables, cable grip

Undated catalogue outlining anaesthetic apparatus designed and supplied by MIE (Medical and Industrial Equipment), London.Blue cardboard covered book with low sheen white pages. Bound using staples through the spine and star pins.