Showing 731 items
matching australian buttons
-
Shepparton RSL Sub Branch
Uniform, Hat, Emerco
Navy-black coloured peaked cap with red piping trim along peak. Red felt band encircles the band. Black patent leather chin strap is held in place with two gold buttons on either side, each depicting a crown above the map of Australia. Gold badge in centre depicts kangaroo in front of crossed rifles underneath a crown with oak leaves forming an arch eitehr side. Interior brim is green with black patent leather trim; brown leather sweatband with holes for air cirulation, tied at back with cream silk bow. Top of hat is covered with plastic layer, underneath which is the manufacturer’s label and a sticker for size.Sticker reads “6 7/8”, and manufacturer’s label reads “MELBOURNE 36 1218/EMERCO/REG TRADE MARK/THIS IS YOUR GUARANTEE FOR QUALITY/MADE IN AUSTRALIA”. Badge reads “DUTY FIRST/ROYAL AUSTRALIAN REGIMENT”.royal australian regiment, rar, army, uniform -
Federation University Historical Collection
Costume - Nursing, Nurses uniform and cape, 1970s?
This uniform was worn by student nurses at the Hillcrest Psychiatric Hospital in Adelaide in the early 1970s. In 1964, Northfield Mental Hospital was renamed Hillcrest Hospital. .1) Mid pink waisted and darted uniform with a front pocket (with H H embroidered) on left breast and side pockets on skirt. Buttoned up the front, with three buttons on top and a placket with four hidden buttons on skirt. There is a hook and eye at the waist and a separate belt with two buttons and buttonholes. There is a collar and cuffed short sleeves, a back yoke and a center inverted pleat. .2) A lined (double layer) woollen royal blue cape with collar and neck tie and a hook and eye clasp.Embroidered on top pocket - H Hnursing, hillcrest hospital, student nurse uniform, nurse cape, costume, textiles, cape, uniform, hillcrest psychiatric hospital -
Federation University Historical Collection
Costume, Ballarat School of Mines Blazer, c1935, 1930-40s
The School of Mines was established in 1870 in Ballarat, making it Australia's third oldest tertiary institution. Redmond Barry was its first president, and he was involved in the creation of university degree level courses for the school. The School of Mines was divided into a tertiary division and a technical division. The tertiary division provided higher education courses such as mining engineering, geology, education and business studies, while the technical division provided such programs as wool classing, plumbing and bricklaying.It remained in that form until the 1967 when it was split into three institutions, Ballarat School of Industries, Ballarat Technical School, and Ballarat Institute of Advanced Education. They remained three entities until 1976. Ballarat Institute of Advanced Education merged into Ballarat College of Advanced Education. The Ballarat School of Industries and Ballarat Technical School merged into the School of Mines and Industries, Ballarat (SMB) in 1976. Several entities merged or had arrangements with SMB. In 1994, a memo of understanding (MOU) was signed between SMB and the Ararat Technical School, which was founded in 1969. Then, in 1998, SMB and the Horsham-based Wimmera Institute of TAFE (1984), dating back to 1882, merged into the University of Ballarat to create a larger University. Green woollen, mostly unlined (apart from the upper back and sleeves) blazer with embroidered emblem on breast pocket. The edges are bound including the three pockets and the sleeve cuff 9 cm from the edge. There are three green buttons at the front. The internal edges are overlocked and there is a panel stitched to the inside where the top of the side pockets are stitched. Embroidered patch on breast pocket.ballarat school of mines, blazer, coat of arms, costume, textiles -
Federation University Historical Collection
Costume, Ballarat School of Mines Blazer, 1930-50s
The School of Mines was established in 1870 in Ballarat, making it Australia's third oldest tertiary institution. Redmond Barry was its first president, and he was involved in the creation of university degree level courses for the school. The School of Mines was divided into a tertiary division and a technical division. The tertiary division provided higher education courses such as mining engineering, geology, education and business studies, while the technical division provided such programs as wool classing, plumbing and bricklaying.It remained in that form until the 1967 when it was split into three institutions, Ballarat School of Industries, Ballarat Technical School, and Ballarat Institute of Advanced Education. They remained three entities until 1976. Ballarat Institute of Advanced Education merged into Ballarat College of Advanced Education. The Ballarat School of Industries and Ballarat Technical School merged into the School of Mines and Industries, Ballarat (SMB) in 1976. Several entities merged or had arrangements with SMB. In 1994, a memo of understanding (MOU) was signed between SMB and the Ararat Technical School, which was founded in 1969. Then, in 1998, SMB and the Horsham-based Wimmera Institute of TAFE (1984), dating back to 1882, merged into the University of Ballarat to create a larger University. Green woollen, unlined blazer with embroidered emblem on breast pocket. The edges are bound including the three pockets and the sleeve cuff 9 cm from the edge. There are three green buttons at the front. The internal edges are bound and there is tape stitched to the inside where the top of the side and breast pockets are stitched. Embroidered patch on breast pocket. Makers woven tags.ballarat school of mines, blazer, coat of arms, school uniform, costume, textiles -
Federation University Historical Collection
Costume - Blazer, Ballarat Teachers' College Blazer, c1954
Wilma Hall (later Hobbs) wore this blazer while studying at the Ballarat Teachers' College in 1954-55. The college was established after the Victorian State Government and the State Education Department decided to establish two provincial teachers' colleges, at Ballarat and Bendigo. On 04 May 1926 W.H. Ellwood (Principal), Miss A. Bouchier, and Mr A.B. Jones, welcomed the first enrolment of 61 students to undertake the one year course. In 1927 the College moved to the former Ballarat East Town Hall in Barkly Street, which was remodelled for their use. It closed in December 1931 due to the Great Depression. In 1946 Ballarat Teachers' College reopened and relocated to the Dana Street State School. It was originally planned to open as a women's college, for whom the residence at 130 Victoria Street was purchased, but the decision was made to admit resident men from Ballarat. Mr T.W. Turner was appointed as Principal in 1951 and directed the introduction of a two year course for the Trained Primary Teachers' Certificate. The former one year course was terminated at the end of 1951. In 1958 the College was relocated to a custom built facility at Gillies Street, in close proximity to the Ballarat Botanical Gardens. Numbers increased with the introduction of the Trained Infant Teachers' Certificate course under the guidance of Mary Egan. With the introduction of a three year Diploma Course in 1968 accommodation became cramped. The introduction of the Diploma of Teaching (Primary) led to the Trained Infant Teachers' Certificate being discontinued in 1969, and the end of the Trained Primary Teachers' Certificate in 1969. Secondary Art and Craft students began studies at Ballarat Teachers' College in 1969 under Mr Ted Doney. In 1971 Mr D. Watson was appointed Principal. The State College of Victoria was proclaimed by Order in Council on 24 July 1973, and Ballarat Teachers' College became a constituent college of the State College of Victoria, and was known as State College of Victoria, Ballarat. By 1975 the College moved to Mount Helen as part of the Ballarat College of Advanced Education. Pre service teachers currently undertake their studies on the Mount Helen Campus of Federation University. ("Ruffians Attempted to Carry off the School Tent: A History of State Education in Ballarat", 1974, p73-4.)Blue unlined, woollen Ballarat Teachers' College blazer with embroidered pocket. The jacket had three buttons at the front although two are missing. The edges are all bound with tape including the pocket and the sleeve binding is 12cm from the cuff edge. The seam edges are either turned back and stitched or cut with pinking shears. There is a small panel on either side of the inside between the side seam and the facing which reinforces the pockets.Embroidered emblem of the Ballarat Teachers College and woven makers patch - The Myer Store for Menballarat teachers' college, blazer, wilma hall, wilma hobbs, textiles, costume, embroidery, uniform -
Federation University Historical Collection
Costume, Professional, Male nurse uniform, 1986-90
The nurse uniform is worn by nurses for hygiene and identification. Worn by students at the Ballarat College of Advanced Education School of Nursing.White button up "Ben Casey" style shirt with a single top pocket on left chest. There are 4 buttons on right side and 3 buttons at the shoulder of the right side. and a round reinforced neckline. The pocket patch says Ballarat C.A.E. Nursing with emblem.nurse uniform, male nurse uniform, nurse shirt, professional, ballarat college of advanced education nursing, costume, textiles, ben casey -
Federation University Historical Collection
Costume, Ballarat Teachers' College Blazer, 1940s
This blazer was worn by Elaine Cooke when she attended the Ballarat Teachers College. The Ballarat Teachers' College was established after the Victorian State Government and the State Education Department decided to establish two provincial teachers' colleges, at Ballarat and Bendigo. On 04 May 1926 W.H. Ellwood (Principal), Miss A. Bouchier, and Mr A.B. Jones, welcomed the first enrolment of 61 students to undertake the one year course. In 1927 the College moved to the former Ballarat East Town Hall in Barkly Street, which was remodelled for their use. It closed in December 1931 due to the Great Depression. In 1946 Ballarat Teachers' College reopened and relocated to the Dana Street State School. It was originally planned to open as a women's college, for whom the residence at 130 Victoria Street was purchased, but the decision was made to admit resident men from Ballarat. Mr T.W. Turner was appointed as Principal in 1951 and directed the introduction of a two year course for the Trained Primary Teachers' Certificate. The former one year course was terminated at the end of 1951. In 1958 the College was relocated to a custom built facility at Gillies Street, in close proximity to the Ballarat Botanical Gardens. Numbers increased with the introduction of the Trained Infant Teachers' Certificate course under the guidance of Mary Egan. With the introduction of a three year Diploma Course in 1968 accommodation became cramped. The introduction of the Diploma of Teaching (Primary) led to the Trained Infant Teachers' Certificate being discontinued in 1969, and the end of the Trained Primary Teachers' Certificate in 1969. Secondary Art and Craft students began studies at Ballarat Teachers' College in 1969 under Mr Ted Doney. In 1971 Mr D. Watson was appointed Principal. The State College of Victoria was proclaimed by Order in Council on 24 July 1973, and Ballarat Teachers' College became a constituent college of the State College of Victoria, and was known as State College of Victoria, Ballarat. By 1975 the College moved to Mount Helen as part of the Ballarat College of Advanced Education. Pre service teachers currently undertake their studies on the Mount Helen Campus of Federation University. ("Ruffians Attempted to Carry of the School Tent: A History of State Education in Ballarat", 1974, p73-4.)Blue woollen blazer with Ballarat Teachers College lapel pin and embroidered pocket. The edges are bound, including the two side pockets and the breast pocket and the sleeve cuffs have the binding 10.5 cm from the edge. The blazer has three front buttons. The body is unlined but the sleeves are lined with a cotton fabric. The hem edge is bound and hand stitched in place, whilst the back neck facing is cut with pinking shears.Hand written with pen on white tape - E. Cookballarat teachers' college, blazer, elaine cook, costume, textiles, uniform, embroidery -
Federation University Historical Collection
Costume, Ballarat Teachers' College Blazer, c1947
This blazer was worn by Tom Hill in 1947. He was educated at Digby Primary School and Hammilton High and was appointed principle of Paschendale P.S. and Kannagulk P.S. at the age of 17 before he entered the College at Dana Street. He graduated in 1948 and was appointed to the Myrtle Creek school. At the time of his retirement in 1986 he was principle of Bacchus Marsh P.S. The Ballarat Teachers' College was established after the Victorian State Government and the State Education Department decided to establish two provincial teachers' colleges, at Ballarat and Bendigo. On 04 May 1926 W.H. Ellwood (Principal), Miss A. Bouchier, and Mr A.B. Jones, welcomed the first enrolment of 61 students to undertake the one year course. In 1927 the College moved to the former Ballarat East Town Hall in Barkly Street, which was remodelled for their use. It closed in December 1931 due to the Great Depression. In 1946 Ballarat Teachers' College reopened and relocated to the Dana Street State School. It was originally planned to open as a women's college, for whom the residence at 130 Victoria Street was purchased, but the decision was made to admit resident men from Ballarat. Mr T.W. Turner was appointed as Principal in 1951 and directed the introduction of a two year course for the Trained Primary Teachers' Certificate. The former one year course was terminated at the end of 1951. In 1958 the College was relocated to a custom built facility at Gillies Street, in close proximity to the Ballarat Botanical Gardens. Numbers increased with the introduction of the Trained Infant Teachers' Certificate course under the guidance of Mary Egan. With the introduction of a three year Diploma Course in 1968 accommodation became cramped. The introduction of the Diploma of Teaching (Primary) led to the Trained Infant Teachers' Certificate being discontinued in 1969, and the end of the Trained Primary Teachers' Certificate in 1969. Secondary Art and Craft students began studies at Ballarat Teachers' College in 1969 under Mr Ted Doney. In 1971 Mr D. Watson was appointed Principal. The State College of Victoria was proclaimed by Order in Council on 24 July 1973, and Ballarat Teachers' College became a constituent college of the State College of Victoria, and was known as State College of Victoria, Ballarat. By 1975 the College moved to Mount Helen as part of the Ballarat College of Advanced Education. Pre service teachers currently undertake their studies on the Mount Helen Campus of Federation University. ("Ruffians Attempted to Carry of the School Tent: A History of State Education in Ballarat", 1974, p73-4.)Blue satin lined, wool gabardine Ballarat Teachers' College blazer with embroidered pocket. The jacket has two plain silver coloured buttons at the frontEmbroidered emblem of the Ballarat Teachers College.ballarat teachers' college, blazer, tom hill, thomas hill, costume, uniform, embroidery, textiles -
Federation University Historical Collection
Costume, Ballarat Teacher's College Blazer, c1948
This blazer was worn by Helen Veitch in 1948, while a student at the Ballarat Teachers' College in Dana Street. She lived in Ascot Street South and attended the Urquhart Street Primary School. The first class she taught was grades 1&2 at Wedderburn Primary School with 46 students. She also taught at Wendouree West, Wendouree, Urquhart Street and Pleasant Street Primary Schools. She married in 1955 and died in 1979.This royal blue woollen, unlined blazer is bound on all the edges with braid including the tops of the three pockets and 8.5cm from the sleeve edge. The embroidered patch breast pocket has the emblem of the Ballarat Teachers College. It has three buttons at the front. Most of the seams are bound, though some are turned back and stitched down. The back of the top of the pockets are reinforced with cotton fabric.Maker's embroidered patch - Paterson, Powell Pty Ltd, Ballarat White tape with handwritten marking - Veitchblazer, helen veitch, costume, textiles, logo, embroidery -
Federation University Historical Collection
Modum, Ericovox Loud Speaking Telephone, c1959
Ericsson had designed its first speakerphone in the 1930s, it was in 1959 that the company made a major breakthrough with the development of the Ericovox, according to the website EricssonHistory.com. Until then, speakerphones experienced problems with ambient noise and echoes. The pyramid-shaped Ericovox featured an amplification system that addressed the background noise problems by automatically amplifying the audio in the direction of the speaker, decreasing it in other directions. The Ericovox did not have a handset or a ringer, but could be connected with a telephone, such as the Ericofon. 9http://www.ehow.com/info_12141155_ericsson-phones-1950s.html) Grey plastic loud speaking telephone with dial, three buttons, and a plug to connect to the telephone system. The phone is an Ericovox 1/DBe1225/1 A18 7516telephone, ericovox -
Federation University Historical Collection
Costume - Enamelled Buttons, Edith Alice Watson, Two Enamelled Buttons, c 1930s
Edith (Alice) WATSON (1914–2010) Murtoa | Australia The monogrammed initials on these buttons are for Alice Watson. Alice Watson studied at the Ballarat Technical Art School (at the School of Mines, Ballarat) from 1930 until 1933. Watson sat several departmental exams, including drawing and painting plant forms from nature, lettering, Composition of Form and Colour and advanced General Design, as well as dressmaking and embossed leatherwork. Her folio applies many Australian native floral elements to design. Upon graduating, Watson taught at the Murtoa High School, living with her parents until their deaths in 1972 and 1988 when she was 74 years old. Alice Watson died in Ballarat, aged 95, having conserved her beautiful student folio, which was generously gifted to the Federation University permanent Historical Collection by the Watson family. Two circular enamelled buttons with dark blue background and gold edging. The initials A W are the design feature. The A is white with gold edging and the W is red with gold edging. The reverse side is gold. They are contained in a small, green, octagonal shaped cardboard box. buttons, edith alice watson, alice watson, enamelled buttons, ballarat technical art school -
Federation University Historical Collection
Calculator, Monroe High Speed Adding-Calculator
Used before the invention of electronic calculators, mechanical adding machines were most often used for long calculations. This calculator was used in the Ballarat School of Mines Physics Department. Addition and subtraction were perfomed by turning the larger side mounted crank forward or backward. the smaller crank lever zeros the two registers. Two buttons are provided to set the machine either to clear the number entry with each revolution of the crank or to repeat the entry. The largest button resets the keybord to all 0s.A calculator with shiftable carriage and digit separator rods between each row of keys.ballarat school of mines, calculator -
Lara RSL Sub Branch
Belt, Leather Belt
This belt belonged to a WW1 Australian Anzac who most probably, because of the buttons and badges, served on the Western Front. Records destroyed in 1969 bush fires at Lara means we are unable to determine who owned this in the RSL. The belts is called a 'stable belt' and the one you have acquired is an early example with a leather pocket. It became common in WW1 for both, leather belts (especially that from the 1903 bandolier equipment as worn by those in the Boer War), and stable belts to be used to hold badges collected from fellow soldiers and for that reason it was often known as a 'souvenir belt'. The evolution of the stable belt: It seems that stable belts began to become popular across the Army as a whole around the turn of the 20th century, although they probably originated with the cavalry a little earlier sometime in the 1880s/1890s. All units at that time had horses on their establishment and those soldiers told off to attend them reported for Stable Parade in Stable Dress which consisted of very high waisted and pocket less breeches, or trousers, held up by braces and collarless, woollen flannel shirts with sleeves rolled up. This was to facilitate the rigorous physical effort and flexibility of movement necessary for mucking out and grooming. Braces at that time had no elastic as rubber was expensive, they were made of cotton with no 'give' whatsoever and so soldiers commonly allowed the braces to flop down from the waist so that they could bend over freely. For trousers that fitted loosely (due to the high waist) this meant that they tended to slip down and at first soldiers cinched them in with leather belts. Later on the regimental saddlers began to make belts from the same, plain canvas or wool strapping used for the horses Surcingle and utilising the same double leather strap and buckle arrangement for security (if one strap broke the other would hold and prevent the saddle from coming unseated). One particular feature of these early stable belts was a sewn on (or in) pocket, secured by a stud or clip, within which loose change could be kept, or a pocket watch, as there were no pockets in the breeches. As you might imagine these became very popular as the pocket was useful and the extra breadth afforded by the canvas strapping made them very comfortable. Around about the turn of the 20th century it began to be popular for officers to wear neckties in regimental colours both for sport and less formal, country dress. This habit probably began with the Queens Household troops and Line Cavalry, but quickly spread throughout the Army and it appears as if this use of regimental colours spread to the canvas or wool strapping used to make stable belts. For this reason the stable belts invariably followed the same colour scheme (but not always the same pattern arrangement) of regimental neck ties. This belt is an example of what Australian troops collected when on the Western Front during WW1 and when on leave.Leather Belt with 31 Badges and Buttons from WW1 attachedSee Mediaww1, world war 1, australian army, badges, button, belt, stable belt -
Lara RSL Sub Branch
Belt, Webbing Belt
This belt belonged to a WW1 Australian Anzac who most probably, because of the buttons and badges, served on the Western Front. Records destroyed in 1969 bush fires at Lara means we are unable to determine who owned this in the RSL. The belts is called a 'stable belt' and the one you have acquired is an early example with a leather pocket. It became common in WW1 for both, leather belts (especially that from the 1903 bandolier equipment as worn by those in the Boer War), and stable belts to be used to hold badges collected from fellow soldiers and for that reason it was often known as a 'souvenir belt'. The evolution of the stable belt: It seems that stable belts began to become popular across the Army as a whole around the turn of the 20th century, although they probably originated with the cavalry a little earlier sometime in the 1880s/1890s. All units at that time had horses on their establishment and those soldiers told off to attend them reported for Stable Parade in Stable Dress which consisted of very high waisted and pocket less breeches, or trousers, held up by braces and collarless, woollen flannel shirts with sleeves rolled up. This was to facilitate the rigorous physical effort and flexibility of movement necessary for mucking out and grooming. Braces at that time had no elastic as rubber was expensive, they were made of cotton with no 'give' whatsoever and so soldiers commonly allowed the braces to flop down from the waist so that they could bend over freely. For trousers that fitted loosely (due to the high waist) this meant that they tended to slip down and at first soldiers cinched them in with leather belts. Later on the regimental saddlers began to make belts from the same, plain canvas or wool strapping used for the horses Surcingle and utilising the same double leather strap and buckle arrangement for security (if one strap broke the other would hold and prevent the saddle from coming unseated). One particular feature of these early stable belts was a sewn on (or in) pocket, secured by a stud or clip, within which loose change could be kept, or a pocket watch, as there were no pockets in the breeches. As you might imagine these became very popular as the pocket was useful and the extra breadth afforded by the canvas strapping made them very comfortable. Around about the turn of the 20th century it began to be popular for officers to wear neckties in regimental colours both for sport and less formal, country dress. This habit probably began with the Queens Household troops and Line Cavalry, but quickly spread throughout the Army and it appears as if this use of regimental colours spread to the canvas or wool strapping used to make stable belts. For this reason the stable belts invariably followed the same colour scheme (but not always the same pattern arrangement) of regimental neck ties.This belt is an example of what Australian troops collected when on the Western Front during WW1 and when on leave.Webbing Belt with Badges and Buttons WW1See Mediaarmy, australian army, western front, aif, s.w.ellis, service number 640, 2 m.g.c., buttons, badges, belt, stable belt -
Lara RSL Sub Branch
Uniform, Fatigue Jacket, September 2015
... of cotton. With velcro sections to attach labels. Plastic buttons ...The Air Force General Purpose Uniform was adopted by the RAAF in July 2014. It is worn as dress of the day for non-combat operations. These were worn by Bob Schouten.This jacket represents the every day experiences of Australian air force members since 2014.Blue/white/grey/green urban camouflage jacket. Made of cotton. With velcro sections to attach labels. Plastic buttons.'Australia' 'Air Force'military, raaf, air force, uniform, jacket, camouflage -
Lara RSL Sub Branch
Uniform, Shirt
... RSAR on the right sleeve. Plastic buttons. 'The AustralianArmy ...Australian army sergeant's shirt of unknown origin. This shirt was made in November 2002.Khaki short sleeved shirt. Pockets on the front, stiff collar, badges of rank on the left shoulder and sleeve. Badge RSAR on the right sleeve. Plastic buttons.'The AustralianArmy' 'RASR'sergeant, australia, army, shirt, uniform, khaki -
Lara RSL Sub Branch
Uniform, Army Jacket, 1950
Waist length jacket ,kahki colour ,Twin breast pockets 'long sleeves buttoned cuffs inner pockets 4buttoning front ,Waist fastening tab& buckle. Woollen fabric outer ......cotton fabric inner pockets &bindings .....9 buttons ....2 insignia on each shoulder 71 JOHNSON .......MAKER EDELSTEIN & KARP Made in Australia . Dry cleaning numbers 001 no 16380 attached to hanging up loop .bomber jacket, khaki, infantry, army -
Lara RSL Sub Branch
Uniform, Army Dress Jacket
Khaki Service Dress Ass. Sub Branch Australia Red cloth Badges NZ 28 Maori 28 Battalion on both Shoulders Cloth Badge New Zealand Flag on left Shoulder Brass Buttons Badges of Rank Major on both shoulders Cloth Tag White on Inside of Jacket Emerco Brand -
Lara RSL Sub Branch
Uniform, Commonwealth Government Clothing Company, Sergeant Black dress jacket Army, 1969
Jacket made in 1969 for use by Australian army personal.Black Dress Jacket with sergeant stripes on the sleeves.Has a signal corps badge on each lapel.Also six brass buttons on front of Jacket. -
Lara RSL Sub Branch
Sergeant's dress uniform trousers, Commonwealth Government Clothing Company, Army Sergeant's dress uniform trousers, 1969
Made for use by Australian army personal.Sergeants black uniform trousers with a 45mm red stripe on both legs.Has buttons on waist for braces.Labels inside for name and number and manufacturing details. -
Lara RSL Sub Branch
Uniform, Army Sergeant Black dress belt
Made for use with dress uniform for Australian army personal.Black dress belt with 3 buttons and brass buckle at one end. -
Lara RSL Sub Branch
Uniform, Fletcher Jones Victoria, Army Dress Jacket, 1996
Khaki Army Dress JacketThe Australian Army Rising Sun Cloth Cloth Badge on each shoulder Jacket has no Buttons White cotton Label on inside of Jacket with provision for ID. Fletcher Jones Victoria 1996 Stock Item Tag on Right Sleeve -
Lara RSL Sub Branch
Uniform, ADI Australian Defence Industries, Camouflage Jacket Australia, 2006
DPCU Standard Working Dress of Army and RAAFDisruptive Pattern Camouflage Jacket Two Pockets with buttons Velcro patch on each pocket The Australian Army Cloth Badge above Right Pocket White cloth label ADA Victoria 2006 Size 105L Name Tag Cloth Garrett above right Hand Pocket -
Lara RSL Sub Branch
Uniform, ADI Australian Defence Industries, Camouflage Jacket Australia, 2006
DPCU Standard Working Dress of Army and RAAFDisruptive Pattern Camouflage Jacket Two Pockets with buttons Velcro patch on each pocket The Australian Army Cloth Badge above Right Pocket White cloth label ADA Victoria 2006 Size 105L Name Tag Cloth Garrett above right Hand Pocket -
Lara RSL Sub Branch
Army Trousers, E.W. PTY LTD, Australian Army Trousers, c. 1968
These trousers, along with the rest of the dress uniform, belonged to an individual named H.E. Schulze. It is believed to have been dropped off to the RSL, so no additional information is known.This uniform serves as an example of the military dress worn by the Royal Australian Army (Royal Australian Artillery Regiment) during the late sixties.Khaki trousers with pleats and a series of belt loops at the waist; two front pockets; and three buttons positioned at the left, right, and centre of the back of the trousers (for attaching a jacket to the trousers). There is a large tear in the seat.lara, rsl, royal australian army, royal australian artillery, war -
Lara RSL Sub Branch
Jacket, Australian Governmentb Clothing Factory, Petty Officer Naval Jacket, 1979
Worn by Robert Lawson Promoted to Petty Officer Engineering (MTP) 1979This uniform was worn by Bob Lawson. Bob is a member of Lara RSL, and this uniform is representative of his service in the Royal Australian Navy.Dark blue jacket with brass buttons and a rank bar on the left breast. Chevrons and insignia on the left arm.lara, rsl, military, war, australia, navy -
Lara RSL Sub Branch
Trousers, Australian Governmentb Clothing Factory, Petty Officer Naval Trousers, 1979
Worn by Robert Lawson Promoted to Petty Officer Engineering (MTP) 1979This uniform was worn by Bob Lawson. Bob is a member of Lara RSL, and this uniform is representative of his service in the Royal Australian Navy.Dark blue trousers with brass buttons. Has a large tear in the seat.lara, rsl, military, war, australia, navy -
Nhill Aviation Heritage Centre
Summer flying suit, boots, leather helmut and goggles
This clothing was worn by Merv while flying as navigator in B24 bombers from northern Australia in 1945Cotton khaki colour overall style flying suit with four large buttons and map pouch. Black leather flying boots with lamb skin lining and leather strap and buckle at top. Leather flying helmet and goggles. -
Nhill Aviation Heritage Centre
Memorabilia, RAAF Officer's hat
Cap belonging to father of Nhill residentBlue hat with black elastic band . Silver buttons with crown and wings, securing thin black vinyl band between headpiece and visor. Felt and wire fabricated crown , golden metal eagle badge and gold wire fern emblem at front of cap.M.TX SIZE 7 1/8 AF MADE IN AUSTRALIA. F.SEDDON on name tagcap, raaf cap, seddon, -
Nhill Aviation Heritage Centre
Buttons, Variety of airforce buttons
These buttons and badges belonged to Frank Seddon, an airforce pilot during World War 11, father of Nhill resident Pat Beacom.5 black 25 mm diameter buttons and 4 black 17mm diameter buttons with crown and eagle logo. RSL lapel badge , and RSL pin badge. Brown Australian Military Forces button 20 mm diameter, with crown and map of Australia inscribed on it 2 smaller slightly damaged buttons. airforce, buttons, seddon, wwii, ww2