A modern detailed replica to scale 1:200 of the early 20th C battleship launched in 1906. " The dreadnought class defined the basic form of battleships up to the 2nd WW. Original specifications: Length 526 ft; beam 82 ft; speed: 21 knots cruising Crew complement: 657; Armament: 10 12inch guns; 18 12 pdr guns( 4 shown on model) ; Engines: two turbines driving 4 shafts; weight: 17,900 tons fully laden; coal capacity 2977 tons; The ship was broken up for scrap in 1920 - David Lumsden donor and modelmaker Detailed Model of the Dreadnought 90% cardboard model of early 20th C. battleship one white ensign; on a polished wood plinth with cardboard hand lettered labels. Decks painted pale gunship grey and below waterline bright red. Model on polished wood plinth with bevelled edge.two card labels adhered to plinth: "David Lumsden 2014 Scale 1:72" "H M S Dreadnought"model ships, h.m.s. dreadnought, battleships, ww1, david lumsden

The chest was constructed to allowable dimensions for storage in the ship's hold. The sturdy watertight construction afforded protection for the chests contents. It can be imagined that these would be household utensils, items of clothing and the most treasured ornaments as space permitted. It is likely that the contents included some building tools and as well, implements which Christian Ziebell used in his trade as a butcher in Bruel, thereby enabling him to undertake profitable work on his arrival in Australia.This object is of primary significance. The Koffer was constructed to allowable dimensions for storage in the ship’s hold. The sturdy watertight construction afforded protection for the Koffer’s contents on the voyage aboard the Privislaw from Hamburg, Germany to Hobsons Bay, Australia in 1850. The Koffer held the precious necessities for life for Christian Ziebell's family at their new destination. It is likely that the contents included some building tools as well, implements that Christian used in his trade as a butcher in Bruel, thereby enabling him to undertake profitable work on arrival in Australia. The wooden Koffer was airtight, so if lost overboard it would be retrievable. Some were fixed to the ship’s deck. After they settled at Westgarthtown the Koffer continued to contain the precious documents through each generation. Only the current owners saw the contents in each generation, and the children always regarded it as a “treasure chest”, which was always locked and out of bounds for them. Large wooden trunk/koffer. Base is rectangular, and lid is rectancular to fit the base but curves between the front and back. Morticed corners; protruding base with beveled edge. Supported by profiled runners with four built-in feet. Handle for carrying on each end, and locking mechanism on front.'C. Ziebell' written in large font on back of chestpersonal effects, travel goods, pribislaw, johann christian ziebell, german migration, luggage

A 'Defiance' tennis racquet with oval non-bevelled head, solid convex throat and fishtail handle. String whipping around shoulders and model name imprinted across throat on obverse. Two deep furrows on handle. Materials: Wood, Lacquer, Metal, Glue, Gut, String, Painttennis

Item was given to Swanston Trams employees at the time of the changeover of ownership of Swanston Trams from Government to Private in August 1999. Swamston trams later became known as M>Tram. See reference.Demonstrates an action by Swanston Trams to recall 80 years of Government operated trams in Melbourne at the time of privatisation.Wood block with bevelled edges, with a brass coloured MMTB emblem and a engraved piece "Service to Melbourne's Trams 1919 - 1999". Has a wall hanging cut out on the rear. Contained within a cardboard box with the MMTB emblem and title on the front and Swanston Trams logo and name on the rear.tramways, swanston trams, m>tram, privatisation, employees, momentoes, plaque

The Australian Tramway Employees Association commissioned in 1915, a banner for use in marches or events. It was painted in 1916 by George Grant with its first public appearance at the Eight-Hour Day Diamond Jubilee on 10 April 1916, celebrating the 60th anniversary of the introduction of an eight-hour working day in Victoria. The reference gives a detailed history of the banner, it significance and the background to its painting. It is now held in the collection of Museums Victoria. The ATEA was the forerunner to the Australian Tramway and Motor Omnibus Employees' Association, now part of the Rail Tram and Bus Union. Image provided by Museum's Victoria to the donor - Peter Jewell. The image demonstrates the artists work and the use of symbols in the roles of a union.Framed Image - old gold coloured metal frame, Artglass, with red colour card surround with bevelled gold card inlay containing a high resolution image of the Australian Tramway Employees Association banner. Fitted with a metal hanging wire and a white surround, tape and the framers lable.tramways, unions, atea, atmoea, rtbu, banners, george grant, eight hour day

Small black slate and marble mantle clock with single train movement,pendelum, round white enamel dial with black numerals and hands, brass bezel with bevel edged glass, case of black slate with red marble decoration on front. Donated by Mrs A. Gill, Somerville Street, Bendigo.on movement E793 46horology, clocks, mantle

A B.H. Dyas 'Doug' tennis racquet, with bevelled crown, slender, flat and concave throat, and fine-grooved octagonal handle. Model name across throat on obverse. Retailer's decal across throat on reverse. Materials: Wood, Lacquer, Metal, Glue, Gut, Leather, String, Cloth, Inktennis

A Spalding 'Union Club' flat-top tennis racquet, featuring: solid concave throat; bevelled head; and fine-grooved, slender octagonal handle. Model name, and Spalding logo within ball trademark impressed across throat on obverse. Materials: Wood, Lacquer, Glue, Metal, Guttennis

A Peabody & Whitney 'Clifton' flat-top tennis racquet, with solid concave throat, bevelled head, red leather collar (now missing), and a slender, fine-grooved handle. Model name and manufacturer's details impressed across throat on obverse. Materials: Wood, Lacquer, Glue, Metal, Gut, Leathertennis

A 'Cup Defender' tennis racquet, with: bevelled crown; laminated convex throat; hide reinforcements along underside of shoulders and throat; and fine-grooved, thick octagonal handle. Name of model features across throat on obverse. Materials: Wood, Lacquer, Metal, Glue, Gut, String, Ink, Leather, Hidetennis

A CB Co. tennis racquet featuring: bevelled crown; laminated, convex throat; and fine-grooved bulbous handle. Manufacturer's trademark decal, comprising of monogram centred between two crossed racquets, with a ball immediately below, features across throat on obverse. Materials: Wood, Lacquer, Metal, Glue, Gut, Inktennis

Plaque been presented to Brigadier Lowen, Brig Lowen served in 2/5 Australian Infantry Battalion in WWIIPart of a donation of items owned by Brigadier Lowen Shield shaped wooden plaque, constructed of pine with light coloured stain. affixed in front of the base is a smaller shield painted black with a gold bevelled edge. this shield has a silver horn hanging from a bow. This shield is placed above a gold painred scolled banner that has the words " THE LIGHT INFANTY" written on it THE LIGHT INFANTRY5/6 rvr, brig lowen, 2/5th bn, bhq, plaque

Item used to switch the power for the red tail lights circuit from the trolley pole to the battery circuit when the trolley pole was being reversed and not able to provide power to the internal and external lights. Made by the SECV. Salvaged from tram 14 during the project to renew the wiring and electrical arrangements of the tram. The box was located adjacent to the driver's windows and would click when the trolley pole was placed back on the overhead.Demonstrates an item fitted to a tramcar to switch an external battery tail lighting circuit.Wooden box made from softwood with bevelled corners, plywood top painted green containing an 8 Ohm "Post Office" type relay (see reference) fitted with two "break" contacts and associated insulated wiring soldered to the relevant contacts. See item 9024 for an associated drawing. Two examples held.fuse, tram 14, tramcars, tramcar maintenance, electrical switching

Vincent Kelly (1877-1958) was a photographer in Mitchell Street, operating from 1904 until his death in 1958. As well as general photography he was renowned for war-time portraits of soldiers. A sketch of his photograph of underground miners was used on the reverse side of the 1913 1 pound note.Nameplate from Vincent Kelly Photographers, Bendigo. Glass namepplate with bevelled edge with silver lettering on black glass in wooden frame. 'PHOTOGRAPERS' Bevelled edged has gold coloured 2 cm border. Lower RH Corner 'N Leves.N. Melbourne.' LEVES.- On the 14th inst., at his residence, 117Queensberry-street, North Melbourne, N. Leves, art decorator and glass embosser, late of Garratt- house, Surrey, England, and of Rothesay, Dunedin, aged 43 years. Ref: Family Notices. (1890, March 17). The Argus (Melbourne, Vic. : 1848 - 1957), page 1. http://nla.gov.au/nla.news-article8595014 Seven other nameplates stored in Container 3 yet to be catalogued as 7280 .2 - 7280.8bendigo, business, photograper

Displayed at History HouseSheet-metal lantern with cubed lantern mounted on cylindrical handle. Two sides are full-pane thick bevelled glass, one tin with concave reflector panel on inside and one side with hinged door with red glass circle mounted in the middle. Painted black with black chimney and hood. Brass edging to glass panes.Front: Goodwin & Co/Birmingham (metal embossed plaque, candle mount).port of portland archives

This object is used to wind yarn ,typically wool from a skein or hank into a ball from which it can be worked into the required garment. The skein is placed around the four pegs on the ends of each arm and wound from this into a ball. The movable arm facilitate easier winding of the yarn. It is thought that this may have come from Fletcher Jones factory where it was probably used more to rewind cotton onto reels. Either use is possible.This item or those similar would have been a well used tool in many households before the time of woollen yarn being purchased in balls. As such it has social and historical significance as well as being useful as an item to create discussion.Square wooden base with bevelled edge and central post from which is screwed two wooden strips of wood. A shorter piece of wood is riveted to each end of these two pieces and these have dowel running upright from each end. The top section is movable and can be extended or contracted as required. Light brown in colour.165 on sticker on bottom.warrnambool, wool winder, skein winder, fletcher jones

Clamp wooden set of (2) lengths of wood bevelled at one end and standing parallel. Has (2) long screws with handles and predominant thread that fits through wood lengths. Could be 855. 360mm x 55mm x 40mm Pins are each 405mm long. Diameter at handle 30mm for one and 40mm for other.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Note the graffiti. Older 20th.c and earlier railway cars were rolling palaces of the cabinet makers art. Full of polished timber, plated & embossed metal fittings, soft upholstery & beveled glass. In their earliest form, the Tait’s and earlier swing door cars for even modest suburban work, reflected some level of this design approach. Plus of course large sepia toned photographs on dividing walls displaying tourist spots trains could take you to.Digital TIFF file Scan of 35mm Kodak Safety 5062 black and white transparencygraffiti, interior, passenger carriage, red rattler, tait train

This butter or cheese knife is a decorative example of electroplated cutlery that had become an affordable alternative to more expensive silver cutlery in the late 1800s to early 1900s. The knife has stamp marks in the back of its handle that are a combination of letters and symbols used by British silversmiths to identify their workmanship. The design and type of this knife was not normally used by everyday people but rather those of a higher social class with time and money to have a particular decorative knife to serve butter or cheese. The marks on the handle tell that it was made of nickel silver, and electroplated with superior quality Stirling silver. The Barker Brothers of Birmingham made the knife between 1885 and 1907, but most likely before 1895. It was made for the British, or British colonial, people, connected with a government department such as the navy or defence. This story may be slightly inaccurate, as some silversmiths added extra ‘pseudo marks’ to their wares to disguise the quality. THE MARKS and their meaning – - ‘A1’ The silver used in electroplating this knife was the highest level, ‘superior quality’, measured in grams of silver per table spoon or table fork, with ‘A1’ being 2 2/3 grams, and ‘D’ being 0 1/2 grams of silver. - ‘BB’ The Baker Brothers used these initials from 1885 to 1907. - ‘[crown symbol]’ – This symbol is used for Sterling silver but this knife is a metal alloy. The crown is also the town mark of Sheffield (appointed by the Sheffield Assay Office) but this knife was made in Birmingham, which has the town mark of an anchor. The Barker Brothers may have added the crown mark to this electroplated silverware as a ‘pseudo hallmark’, leading the buyer to think that it was actual Sterling silver. The use of pseudo hallmarks by electroplaters of the Victorian era was common practice but it was illegal. In 1895 the unlawful practice was seen as imitating the Sheffield Silver Mark and the law was firmly applied to eradicate the deception, so items with this mark probably date before 1895. - [EPNS] Electro Plated Nickel Silver, called nickel silver or German silver, is a metal alloy that usually combines copper, nickel and zinc (60 percent copper, 20 percent nickel, 20 percent zinc). It has a silver-white appearance and is sometimes referred to as ‘white ware’. It does not contain any silver but is often used as a base for electroplating, when the item is covered with a thin layer of silver to give it the polished appearance of pure silver. It became popular in the late 19th and early 20th century as an affordable substitute for sterling silver. - Broad Arrow - an official stamp that indicates it was once the property of Britain government, either in Britain or one of its colonies, and used in the defence force. In Great Britain, from an 1875 government act, it was, and still, is a crime to forge or wrongfully use, the broad arrow symbol. The BARKER BROTHERS of Birmingham - Barker Brothers were one of the earlies firms of Birmingham silversmiths, established in 1801 by Mary Barker. They became Barker & Creed, then William and Matthias Barker, then from 1885 they were the Barker Brothers. They were operating in Paradise Street in 1871 until in 1903 they moved to Unity Works, Constitution Hill, in Birmingham. The firm also had a showroom at 292 High Holborn, London, from the early 1900s to the 1980s. In 1907 the firm became Barker Brothers Silversmiths Ltd, then in the 1960s they merged with Ellis & Co, becoming Barker Ellis Silver Co. Ltd. In 1979 they were registered in USA as Ellis & Co., Barker Ellis, and Ellis Barker. The business went into administration in 1992, after almost 200 years of production. The firm advertised as specialists in electroplating, and used the trademarks BRITANOID, UNITY PLATE and THE HYGENIA.This knife is historically significant, dated from 1885 to 1907 but most likely pre-1895, and made by the longstanding Birmingham silversmiths, the Barker Brothers, established in 1801. The knife is an example of decorative flatware used by people of ’class’. It also has the broad arrow stamp, connecting it to the British government, in particular the ordinance department. The stamp also connects it to other items in our collection with that stamp. It may have been connected to pre-Federation government organisations and officials such as the army Garrison, government naval vessel, police, lighthouse keepers, harbour masters. The knife is the only example of its kind in our collection, being a decorative silver butter or cheese knife, made by the Barker Brothers of Birmingham. Butter knife, or cheese knife, electroplated nickel silver (EPNS). Upper blade edge has decorative shape and engraved motifs, lower blade edge is bevelled to a cutting edge, and narrow plain handle flares out to a wide, rounded end. Maker’s marks are stamped on the reverse. Made by Barker Brothers of Birmingham in the late-19th century. Stamps: “

This set of Victorian era wooden sand pegs was part of the equipment used by the Rocket Rescue Crew when attending a shipwreck. The broad pegs were designed to give a strong grip on soft sand and soil. The pegs could be used with the sand anchor as well as to give a stronger hold on the tripod holding the hawser. The same design is still available today and is used by the Army and by campers. The rocket rescue crews used a sand anchor at a beach rescue site to weigh down the rescue apparatus. The crew would connect the shackle to the other cable on the anchor and to the loose steel cable to form a triangle with the cable lengths. They would then bury the anchor in about a 0.75-meter trench, keeping the free end of the cable above the surface. This end of the cable was then connected to a block that was attached to the heavy hawser line. The block and a crotch pole were used to keep the hawser line high and taught as the survivors were hauled to shore on a line or in a breeches buoy. Saving lives in Warrnambool – The coastline of South West Victoria is the site of over 600 shipwrecks and many lost lives; even in Warrnambool’s Lady Bay there were around 16 known shipwrecks between 1850 and 1905, with eight lives lost. In 1859 the first Government-built lifeboat arrived at Warrnambool Harbour and a shed was soon built to house it. In 1858 the provision of rocket and mortar apparatus was approved for lifeboat stations in Victoria, and in 1864 a rocket house was built to safely store the rocket rescue equipment. In 1878 the buildings were moved to the Breakwater area, and in 1910 the new Lifeboat Warrnambool arrived with its ‘self-righting’ design. For almost a hundred years the lifeboat and rocket crews, mostly local volunteers, trained regularly to maintain their rescue skills. They were summoned when needed by alarms, gunshots, ringing bells and foghorns. Some became local heroes but all served an important role. By the end of the 1950s, the lifeboat and rescue equipment had become obsolete. Rocket Rescue Method - The Government of Victoria adopted lifesaving methods based on Her Majesty’s Coast Guard in Great Britain. It authorised the first line-throwing rescue system in 1858. Captain Manby’s mortar powered a projectile connected to a rope, invented in 1808. The equipment was updated to John Dennett’s 8-foot shaft and rocket method that had a longer range of about 250 yards. From the 1860s the breeches buoy apparatus was in use. The apparatus was suspended on a hawser line and manually pulled to and from the distressed vessel carrying passengers and items. In the early 1870s Colonel Boxer’s rocket rescue method became the standard in Victoria. His two-stage rockets, charged by a gunpowder composition, could fire the line up to 500-600 yards, although 1000 yards range was possible. Boxer’s rocket carried the light line, which was faked, or coiled, in a particular way between pegs in a faking box to prevent twists and tangles when fired. The angle of firing the rocket to the vessel in distress was measured by a quadrant-type instrument on the side of the rocket machine. Decades later, in about 1920, Schermuly invented the line-throwing pistol that used a small cartridge to fire the rocket. The British Board of Trade published instructions for both the beach rescue crew and ship’s crew. It involved setting up the rocket launcher on shore at a particular angle measured by the quadrant, inserting a rocket that had a lightweight line threaded through its shaft, and then firing it across the stranded vessel, the line issuing freely from the faking board. A tally board was then sent out to the ship with instructions in four languages. The ship’s crew would haul on the line to bring out the heavier, continuous whip line, then secure the attached whip block to the mast or other sturdy part of the ship. The rescue crew on shore then hauled out a stronger hawser line, which the ship’s crew fixed above the whip block. The hawser was then tightened using the block on the shore end of the whip. The breeches buoy and endless whip are then attached to the traveller block on the hawser, allowing the shore crew to haul the breeches buoy to and from the vessel, rescuing the stranded crew one at a time. This set of sand pegs would have been used with sand anchor that is part of the rocket rescue equipment . It is significant for its connection with local history, maritime history and marine technology. Lifesaving has been an important part of the services performed from Warrnambool's very early days, supported by State and Local Government, and based on the methods and experience of Great Britain. Hundreds of shipwrecks along the coast are evidence of the rough weather and rugged coastline. Ordinary citizens, the Harbour employees, and the volunteer boat and rescue crew, saved lives in adverse circumstances. Some were recognised as heroes, others went unrecognised. In Lady Bay, Warrnambool, there were around 16 known shipwrecks between 1850 and 1905. Many lives were saved but tragically, eight lives were lost.Peg or spike; set of twelve wooden pegs, painted red. Pages have a long, thick square shank with bevelled side edges, flat top with broad hook on one side of the top and a point at the other end. A small hole goes from one side to the other side near the centre of the shank, on the face without the hook. flagstaff hill maritime museum & village, flagstaff hill, maritime museum, maritime village, warrnambool, great ocean road, shipwreck, life-saving, lifesaving, rescue crew, rescue, rocket rescue, maritime accidents, shipwreck victim, rocket crew, beach rescue, line rescue, rescue equipment, rocket firing equipment, rocket rescue equipment, rocket apparatus, beach apparatus, breeches buoy, rocket house, rocket equipment, rocket launcher, rocket line, marine technology, beach rescue set, traveller, block, running block, pulley, hawser, faked line, lady bay, warrnambool harbour, port of warrnambool, volunteer lifesavers, volunteer crew, breakwater, rocket rescue method, rocket rescue apparatus, shore to ship, rocket apparatus rescue, stranded vessel, whip line, endless whip, harbour board, sand anchor, rocket set, anchor backer, beach anchor, backer, steel cable, wire cable, sand peg, wooden tent peg, army peg, military peg

A Spalding 'Rally' tennis racquet with concave throat, bevelled crown, string whipping around shoulders, and grooved octagonal handle. Model name across throat on obverse. Spalding ball trademark features along throat on reverse, and impressed in gold on butt cover. Materials: Wood, Metal, Lacquer, Glue, Gut, Ink, Leather, String, Painttennis

A Spalding 'Royal' tennis racquet with bevelled crown, string whipping around shoulders, and deep-grooved octagonal handle. Model name across throat on obverse. Spalding ball trademark features along throat on reverse, and impressed in gold on butt cover. Materials: Wood, Metal, Lacquer, Glue, Gut, Ink, Leather, String, Painttennis

Handmade food safe with white painted wooden frame and perforated zinc screen panels. Galvanised sheet roof. Raised four beveled legs. Two rectangular doors, bottom door large, opens to main area with one shelf. top door small, opens to triangular roof section. Movable latches of wood on both doors.No visible markingsdomestic items, food storage and preservation, food, safe, storage, pantry, carl ziebell

A Centenary Certificate of Appreciation presented by the RVIB to the Ballan Auxiliary for outstanding service.A Centenary Certificate of Appreciation presented to Ballan Auxiliary for outstanding service. Royal Victorian Institute for the Blind, babies, children and adults. It bears the RVIB Seal, a logo and the words Centenary Year 100 1866/1966. It is signed by the President and the Executive Director. The certificate is cream coloured with a light blue border, under glass in a plain, beveled, light coloured timber frame.This registration number is marked on the back of the frame.certificate, royal victorian institute for the blind, ballan auxiliary

This lamp would have been attached to a coach, or even an early automobile, for lighting purposes. It could also have been used for outdoor purposes in a household or business setting. Lamps such as this were used in the 19th century and early 20th century and preceded or accompanied the use of oil lamps and were later superseded by electric and gas lighting.This item is of historical interest and is retained for display purposes.This is a rectangular-shaped lamp made of metal. It is painted black and has clear glass with bevelled edges on two sides and a small round red-coloured glass on another side. The lighting mechanism inside the glass appears to have held a candle. The body of the lamp is mounted on a solid round metal pipe. There is a metal handle at the top for attaching the lamp to a wall or stand.vintage lighting, coach lamps

A Barker & Son 'The Invincible' tennis racquet with concave wedged throat and bevelled, oval head. Has cloth tape reinforcements around shoulders, and an octagonal handle with 'fishtail' shaped end. Model name imprinted across throat on obverse. Manufacturer's name printed across throat on reverse. Materials: Wood, Lacquer, Metal, Glue, Gut, Cloth tape, Inktennis